diff options
Diffstat (limited to 'sys-kernel/mactel-linux-sources/files')
7 files changed, 696 insertions, 0 deletions
diff --git a/sys-kernel/mactel-linux-sources/files/2.6.24-mactel-patches-r145/applesmc-macbook2.patch b/sys-kernel/mactel-linux-sources/files/2.6.24-mactel-patches-r145/applesmc-macbook2.patch new file mode 100644 index 0000000..ec3128a --- /dev/null +++ b/sys-kernel/mactel-linux-sources/files/2.6.24-mactel-patches-r145/applesmc-macbook2.patch @@ -0,0 +1,76 @@ +Add sensors set for MacBook2, from register dump on a mid-2007 MacBook2. + +From: Riki Oktarianto <rkoktarianto@gmail.com> + + +--- + + drivers/hwmon/applesmc.c | 29 +++++++++++++++++++---------- + 1 files changed, 19 insertions(+), 10 deletions(-) + +diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c +index 86c66c3..c0dd9b1 100644 +--- a/drivers/hwmon/applesmc.c ++++ b/drivers/hwmon/applesmc.c +@@ -84,12 +84,15 @@ static const char* temperature_sensors_sets[][36] = { + /* Set 0: Macbook Pro */ + { "TA0P", "TB0T", "TC0D", "TC0P", "TG0H", "TG0P", "TG0T", "Th0H", + "Th1H", "Tm0P", "Ts0P", "Ts1P", NULL }, +-/* Set 1: Macbook set */ ++/* Set 1: Macbook2 set */ ++ { "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TN1P", "TTF0", "Th0H", ++ "Th0S", "Th1H", NULL }, ++/* Set 2: Macbook set */ + { "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TN1P", "Th0H", "Th0S", + "Th1H", "Ts0P", NULL }, +-/* Set 2: Macmini set */ ++/* Set 3: Macmini set */ + { "TC0D", "TC0P", NULL }, +-/* Set 3: Mac Pro (2 x Quad-Core) */ ++/* Set 4: Mac Pro (2 x Quad-Core) */ + { "TA0P", "TCAG", "TCAH", "TCBG", "TCBH", "TC0C", "TC0D", "TC0P", + "TC1C", "TC1D", "TC2C", "TC2D", "TC3C", "TC3D", "THTG", "TH0P", + "TH1P", "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S", +@@ -1212,12 +1215,14 @@ static void applesmc_release_accelerometer(void) + static __initdata struct dmi_match_data applesmc_dmi_data[] = { + /* MacBook Pro: accelerometer, backlight and temperature set 0 */ + { .accelerometer = 1, .light = 1, .temperature_set = 0 }, +-/* MacBook: accelerometer and temperature set 1 */ ++/* MacBook2: accelerometer and temperature set 1 */ + { .accelerometer = 1, .light = 0, .temperature_set = 1 }, +-/* MacMini: temperature set 2 */ +- { .accelerometer = 0, .light = 0, .temperature_set = 2 }, +-/* MacPro: temperature set 3 */ ++/* MacBook: accelerometer and temperature set 2 */ ++ { .accelerometer = 1, .light = 0, .temperature_set = 2 }, ++/* MacMini: temperature set 3 */ + { .accelerometer = 0, .light = 0, .temperature_set = 3 }, ++/* MacPro: temperature set 4 */ ++ { .accelerometer = 0, .light = 0, .temperature_set = 4 }, + }; + + /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1". +@@ -1229,16 +1234,20 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { + (void*)&applesmc_dmi_data[0]}, + { applesmc_dmi_match, "Apple MacBook", { + DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), +- DMI_MATCH(DMI_PRODUCT_NAME,"MacBook") }, ++ DMI_MATCH(DMI_PRODUCT_NAME,"MacBook2") }, + (void*)&applesmc_dmi_data[1]}, ++ { applesmc_dmi_match, "Apple MacBook", { ++ DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), ++ DMI_MATCH(DMI_PRODUCT_NAME,"MacBook") }, ++ (void*)&applesmc_dmi_data[2]}, + { applesmc_dmi_match, "Apple Macmini", { + DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), + DMI_MATCH(DMI_PRODUCT_NAME,"Macmini") }, +- (void*)&applesmc_dmi_data[2]}, ++ (void*)&applesmc_dmi_data[3]}, + { applesmc_dmi_match, "Apple MacPro2", { + DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), + DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") }, +- (void*)&applesmc_dmi_data[3]}, ++ (void*)&applesmc_dmi_data[4]}, + { .ident = NULL } + }; + diff --git a/sys-kernel/mactel-linux-sources/files/2.6.24-mactel-patches-r145/applesmc-retry-when-accessing-keys.patch b/sys-kernel/mactel-linux-sources/files/2.6.24-mactel-patches-r145/applesmc-retry-when-accessing-keys.patch new file mode 100644 index 0000000..a12be92 --- /dev/null +++ b/sys-kernel/mactel-linux-sources/files/2.6.24-mactel-patches-r145/applesmc-retry-when-accessing-keys.patch @@ -0,0 +1,115 @@ +Retry up to 200 ms when reading or writing keys. + +From: Nicolas Boichat <nicolas@boichat.ch> + + +--- + + drivers/hwmon/applesmc.c | 69 +++++++++++++++++++++++++++++++--------------- + 1 files changed, 47 insertions(+), 22 deletions(-) + +diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c +index c0dd9b1..3b09cdb 100644 +--- a/drivers/hwmon/applesmc.c ++++ b/drivers/hwmon/applesmc.c +@@ -112,6 +112,9 @@ static const char* fan_speed_keys[] = { + #define INIT_TIMEOUT_MSECS 5000 /* wait up to 5s for device init ... */ + #define INIT_WAIT_MSECS 50 /* ... in 50ms increments */ + ++#define ACCESS_TIMEOUT_MSECS 500 /* wait up to 500ms when accessing a key */ ++#define ACCESS_WAIT_MSECS 5 /* ... in 5ms increments */ ++ + #define APPLESMC_POLL_INTERVAL 50 /* msecs */ + #define APPLESMC_INPUT_FUZZ 4 /* input event threshold */ + #define APPLESMC_INPUT_FLAT 4 +@@ -186,12 +189,13 @@ static int __wait_status(u8 val) + + /* + * applesmc_read_key - reads len bytes from a given key, and put them in buffer. ++ * Tries up to ACCESS_WAIT_MSECS to read the value. + * Returns zero on success or a negative error on failure. Callers must + * hold applesmc_lock. + */ + static int applesmc_read_key(const char* key, u8* buffer, u8 len) + { +- int i; ++ int i, total, ret; + + if (len > APPLESMC_MAX_DATA_LENGTH) { + printk(KERN_ERR "applesmc_read_key: cannot read more than " +@@ -199,33 +203,54 @@ static int applesmc_read_key(const char* key, u8* buffer, u8 len) + return -EINVAL; + } + +- outb(APPLESMC_READ_CMD, APPLESMC_CMD_PORT); +- if (__wait_status(0x0c)) +- return -EIO; ++ for (total = ACCESS_TIMEOUT_MSECS; total > 0; ++ total -= ACCESS_WAIT_MSECS) { ++ ret = 0; ++ outb(APPLESMC_READ_CMD, APPLESMC_CMD_PORT); ++ if (__wait_status(0x0c)) { ++ ret = -EIO; ++ goto wait_fail; ++ } + +- for (i = 0; i < 4; i++) { +- outb(key[i], APPLESMC_DATA_PORT); +- if (__wait_status(0x04)) +- return -EIO; +- } +- if (debug) +- printk(KERN_DEBUG "<%s", key); ++ for (i = 0; i < 4; i++) { ++ outb(key[i], APPLESMC_DATA_PORT); ++ if (__wait_status(0x04)) { ++ ret = -EIO; ++ goto wait_fail; ++ } ++ } ++ if (debug) ++ printk(KERN_DEBUG "<%s", key); + +- outb(len, APPLESMC_DATA_PORT); +- if (debug) +- printk(KERN_DEBUG ">%x", len); ++ outb(len, APPLESMC_DATA_PORT); ++ if (debug) ++ printk(KERN_DEBUG ">%x", len); + +- for (i = 0; i < len; i++) { +- if (__wait_status(0x05)) +- return -EIO; +- buffer[i] = inb(APPLESMC_DATA_PORT); ++ for (i = 0; i < len; i++) { ++ if (__wait_status(0x05)) { ++ ret = -EIO; ++ goto wait_fail; ++ } ++ buffer[i] = inb(APPLESMC_DATA_PORT); ++ if (debug) ++ printk(KERN_DEBUG "<%x", buffer[i]); ++ } + if (debug) +- printk(KERN_DEBUG "<%x", buffer[i]); ++ printk(KERN_DEBUG "\n"); ++ ++ break; ++ ++wait_fail: ++ msleep(ACCESS_WAIT_MSECS); ++ continue; + } +- if (debug) +- printk(KERN_DEBUG "\n"); + +- return 0; ++ if (total != ACCESS_TIMEOUT_MSECS) { ++ printk(KERN_DEBUG "Read: Waited %d ms for the value\n", ++ ACCESS_TIMEOUT_MSECS-total); ++ } ++ ++ return ret; + } + + /* diff --git a/sys-kernel/mactel-linux-sources/files/2.6.24-mactel-patches-r145/applesmc_int.patch b/sys-kernel/mactel-linux-sources/files/2.6.24-mactel-patches-r145/applesmc_int.patch new file mode 100644 index 0000000..5a10e44 --- /dev/null +++ b/sys-kernel/mactel-linux-sources/files/2.6.24-mactel-patches-r145/applesmc_int.patch @@ -0,0 +1,415 @@ +Add interrupt support for the accelerometer. A message is printed in dmesg when an interrupt occurs, but no further handling is done. + +From: Nicolas Boichat <nicolas@boichat.ch> + + +--- + + drivers/hwmon/applesmc.c | 321 +++++++++++++++++++++++++++++++++++++++++++--- + 1 files changed, 298 insertions(+), 23 deletions(-) + +diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c +index 3b09cdb..ff3e79d 100644 +--- a/drivers/hwmon/applesmc.c ++++ b/drivers/hwmon/applesmc.c +@@ -39,14 +39,20 @@ + #include <linux/leds.h> + #include <linux/hwmon.h> + #include <linux/workqueue.h> ++#include <linux/interrupt.h> + + /* data port used by Apple SMC */ + #define APPLESMC_DATA_PORT 0x300 + /* command/status port used by Apple SMC */ + #define APPLESMC_CMD_PORT 0x304 ++/* status port used by Apple SMC to get which interrupt type just happened */ ++#define APPLESMC_INT_PORT 0x31f + + #define APPLESMC_NR_PORTS 32 /* 0x300-0x31f */ + ++/* Defined in ACPI DSDT table, should we read it from there? */ ++#define APPLESMC_IRQ 6 ++ + #define APPLESMC_MAX_DATA_LENGTH 32 + + #define APPLESMC_STATUS_MASK 0x0f +@@ -57,6 +63,8 @@ + + #define KEY_COUNT_KEY "#KEY" /* r-o ui32 */ + ++#define INTERRUPT_OK_KEY "NTOK" /* w-o ui8 */ ++ + #define LIGHT_SENSOR_LEFT_KEY "ALV0" /* r-o {alv (6 bytes) */ + #define LIGHT_SENSOR_RIGHT_KEY "ALV1" /* r-o {alv (6 bytes) */ + #define BACKLIGHT_KEY "LKSB" /* w-o {lkb (2 bytes) */ +@@ -68,6 +76,19 @@ + #define MOTION_SENSOR_Z_KEY "MO_Z" /* r-o sp78 (2 bytes) */ + #define MOTION_SENSOR_KEY "MOCN" /* r/w ui16 */ + ++/* ++ * Interrupt controls. ++ * If the norm of the position (sqrt(MO_X^2+MO_Y^2+MO_Z^2)) is smaller than ++ * MOLT (free fall), or bigger than MOHT (high acceleration) for longer than the ++ * value of MOLD (or MOHD), SMC will trigger an interrupt. ++ */ ++#define MOTION_LOW_NORM "MOLT" /* r/w sp78 (2 bytes) */ ++#define MOTION_HIGH_NORM "MOHT" /* r/w sp78 (2 bytes) */ ++#define MOTION_LOW_NORM_INTERVAL "MOLD" /* r/w ui8 */ ++#define MOTION_HIGH_NORM_INTERVAL "MOHD" /* r/w ui8 */ ++ ++#define MSDW_KEY "MSDW" /* r/w flag (1 byte) */ ++ + #define FANS_COUNT "FNum" /* r-o ui8 */ + #define FANS_MANUAL "FS! " /* r-w ui16 */ + #define FAN_ACTUAL_SPEED "F0Ac" /* r-o fpe2 (2 bytes) */ +@@ -385,12 +406,83 @@ static int applesmc_read_motion_sensor(int index, s16* value) + } + + /* ++ * applesmc_init_check_key_value - checks if a given key contains the bytes in ++ * buffer, if not, writes these bytes. ++ * In case of failure retry every INIT_WAIT_MSECS msec, and timeout if it ++ * waited more than INIT_TIMEOUT_MSECS in total. ++ * Returns zero on success or a negative error on failure. Callers must ++ * hold applesmc_lock. ++ */ ++static int applesmc_init_check_key_value(const char *key, u8 *buffer, u8 len) ++{ ++ int total, ret, i, compare; ++ u8 rdbuffer[APPLESMC_MAX_DATA_LENGTH]; ++ ++ if (len > APPLESMC_MAX_DATA_LENGTH) { ++ printk(KERN_ERR "applesmc_init_check_key_value: cannot " ++ "read/write more than %d bytes", ++ APPLESMC_MAX_DATA_LENGTH); ++ return -EINVAL; ++ } ++ ++ for (total = INIT_TIMEOUT_MSECS; total > 0; total -= INIT_WAIT_MSECS) { ++ ret = applesmc_read_key(key, rdbuffer, len); ++ if (!ret) { ++ compare = 1; ++ for (i = 0; i < len; i++) { ++ if (rdbuffer[i] != buffer[i]) { ++ compare = 0; ++ break; ++ } ++ } ++ ++ if (compare) { ++ return 0; ++ } ++ } ++ ret = applesmc_write_key(key, buffer, len); ++ msleep(INIT_WAIT_MSECS); ++ } ++ ++ if (ret) ++ return ret; ++ else ++ return -EIO; ++} ++ ++irqreturn_t applesmc_irq_handler(int irq, void *dev_id) ++{ ++ u8 int_type = inb(APPLESMC_INT_PORT); ++ ++ switch (int_type) { ++ case 0x60: ++ printk(KERN_INFO "applesmc: received a free fall interrupt\n"); ++ break; ++ case 0x6f: ++ printk(KERN_INFO ++ "applesmc: received a high acceleration interrupt\n"); ++ break; ++ case 0x80: ++ printk(KERN_INFO "applesmc: received a shock interrupt\n"); ++ break; ++ default: ++ printk(KERN_INFO ++ "applesmc: received an unknown interrupt %x\n", ++ int_type); ++ } ++ ++ return IRQ_HANDLED; ++} ++ ++/* + * applesmc_device_init - initialize the accelerometer. Returns zero on success + * and negative error code on failure. Can sleep. + */ + static int applesmc_device_init(void) + { +- int total, ret = -ENXIO; ++ int total; ++ int ret = -ENXIO; ++ int ret1, ret2; + u8 buffer[2]; + + if (!applesmc_accelerometer) +@@ -398,32 +490,79 @@ static int applesmc_device_init(void) + + mutex_lock(&applesmc_lock); + ++ /* Accept interrupts */ ++ buffer[0] = 0x01; + for (total = INIT_TIMEOUT_MSECS; total > 0; total -= INIT_WAIT_MSECS) { +- if (debug) +- printk(KERN_DEBUG "applesmc try %d\n", total); +- if (!applesmc_read_key(MOTION_SENSOR_KEY, buffer, 2) && +- (buffer[0] != 0x00 || buffer[1] != 0x00)) { +- if (total == INIT_TIMEOUT_MSECS) { +- printk(KERN_DEBUG "applesmc: device has" +- " already been initialized" +- " (0x%02x, 0x%02x).\n", +- buffer[0], buffer[1]); +- } else { +- printk(KERN_DEBUG "applesmc: device" +- " successfully initialized" +- " (0x%02x, 0x%02x).\n", +- buffer[0], buffer[1]); +- } +- ret = 0; +- goto out; +- } +- buffer[0] = 0xe0; +- buffer[1] = 0x00; +- applesmc_write_key(MOTION_SENSOR_KEY, buffer, 2); ++ ret1 = applesmc_write_key(INTERRUPT_OK_KEY, buffer, 1); + msleep(INIT_WAIT_MSECS); ++ ++ if (!ret1) ++ break; ++ } ++ if (ret1) ++ printk(KERN_WARNING "applesmc: Cannot set NTOK key, " ++ "will not receive interrupts.\n"); ++ ++ /* Setup interrupt controls. */ ++ buffer[0] = 20; /* 20 msecs */ ++ ret1 = applesmc_init_check_key_value(MOTION_LOW_NORM_INTERVAL, ++ buffer, 1); ++ ++ buffer[0] = 20; /* 20 msecs */ ++ ret2 = applesmc_init_check_key_value(MOTION_HIGH_NORM_INTERVAL, ++ buffer, 1); ++ ++ if (ret1 || ret2) { ++ printk(KERN_WARNING "applesmc: Cannot set motion sensor " ++ "interrupt interval, might not receive " ++ "some interrupts."); + } + +- printk(KERN_WARNING "applesmc: failed to init the device\n"); ++ buffer[0] = 0x00; ++ buffer[1] = 0x60; ++ ret1 = applesmc_init_check_key_value(MOTION_LOW_NORM, buffer, 2); ++ ++ buffer[0] = 0x01; ++ buffer[1] = 0xc0; ++ ret2 = applesmc_init_check_key_value(MOTION_HIGH_NORM, buffer, 2); ++ ++ if (ret1 || ret2) { ++ printk(KERN_WARNING "applesmc: Cannot set motion sensor " ++ "min/max norm parameters, " ++ "might not receive some interrupts."); ++ } ++ ++ /* Mysterious key. */ ++ buffer[0] = 0x01; ++ for (total = INIT_TIMEOUT_MSECS; total > 0; total -= INIT_WAIT_MSECS) { ++ ret1 = applesmc_write_key(MSDW_KEY, buffer, 1); ++ msleep(INIT_WAIT_MSECS); ++ ++ if (!ret1) ++ break; ++ } ++ if (ret1) ++ printk(KERN_WARNING "applesmc: Cannot set MSDW key\n"); ++ ++ /* Initialize the device. */ ++ buffer[0] = 0xe0; ++ buffer[1] = 0xf8; ++ if (applesmc_init_check_key_value(MOTION_SENSOR_KEY, buffer, 2)) { ++ printk(KERN_WARNING "applesmc: failed to init " ++ "the accelerometer\n"); ++ goto out; ++ } ++ ++ ret1 = request_irq(APPLESMC_IRQ, applesmc_irq_handler, IRQF_DISABLED, ++ "applesmc_irq_handler", NULL); ++ ++ if (ret1) { ++ printk(KERN_WARNING "applesmc: cannot setup irq handler\n"); ++ } ++ ++ printk(KERN_DEBUG "applesmc: accelerometer " ++ "successfully initialized.\n"); ++ ret = 0; + + out: + mutex_unlock(&applesmc_lock); +@@ -468,9 +607,16 @@ static int applesmc_resume(struct platform_device *dev) + return applesmc_device_init(); + } + ++static int applesmc_remove(struct platform_device *dev) ++{ ++ free_irq(APPLESMC_IRQ, NULL); ++ return 0; ++} ++ + static struct platform_driver applesmc_driver = { + .probe = applesmc_probe, + .resume = applesmc_resume, ++ .remove = applesmc_remove, + .driver = { + .name = "applesmc", + .owner = THIS_MODULE, +@@ -932,6 +1078,123 @@ static ssize_t applesmc_key_at_index_store(struct device *dev, + return count; + } + ++static ssize_t applesmc_accelerometer_show(struct device *dev, ++ struct device_attribute *attr, char *sysfsbuf) ++{ ++ int ret; ++ unsigned int value = 0; ++ u8 buffer[2]; ++ char *key; ++ int length; ++ struct sensor_device_attribute_2 *sensor_attr = ++ to_sensor_dev_attr_2(attr); ++ ++ switch (sensor_attr->index) { ++ case 0: ++ key = MOTION_LOW_NORM_INTERVAL; ++ length = 1; ++ break; ++ case 1: ++ key = MOTION_HIGH_NORM_INTERVAL; ++ length = 1; ++ break; ++ case 2: ++ key = MOTION_LOW_NORM; ++ length = 2; ++ break; ++ case 3: ++ key = MOTION_HIGH_NORM; ++ length = 2; ++ break; ++ default: ++ printk(KERN_ERR ++ "Invalid index for applesmc_accelerometer_show"); ++ return -EINVAL; ++ } ++ ++ mutex_lock(&applesmc_lock); ++ ++ ret = applesmc_read_key(key, buffer, length); ++ if (length == 2) ++ value = ((unsigned int)buffer[0] << 8) | buffer[1]; ++ else if (length == 1) ++ value = buffer[0]; ++ else { ++ printk("Invalid length for applesmc_param_show"); ++ ret = -EINVAL; ++ } ++ ++ mutex_unlock(&applesmc_lock); ++ if (ret) ++ return ret; ++ else ++ return snprintf(sysfsbuf, PAGE_SIZE, "%u\n", value); ++} ++ ++static ssize_t applesmc_accelerometer_store(struct device *dev, ++ struct device_attribute *attr, ++ const char *sysfsbuf, size_t count) ++{ ++ int ret; ++ u32 value; ++ u8 buffer[2]; ++ char *key; ++ int length; ++ struct sensor_device_attribute_2 *sensor_attr = ++ to_sensor_dev_attr_2(attr); ++ ++ switch (sensor_attr->index) { ++ case 0: ++ key = MOTION_LOW_NORM_INTERVAL; ++ length = 1; ++ break; ++ case 1: ++ key = MOTION_HIGH_NORM_INTERVAL; ++ length = 1; ++ break; ++ case 2: ++ key = MOTION_LOW_NORM; ++ length = 2; ++ break; ++ case 3: ++ key = MOTION_HIGH_NORM; ++ length = 2; ++ break; ++ default: ++ printk("Invalid index for applesmc_accelerometer_show"); ++ return -EINVAL; ++ } ++ ++ value = simple_strtoul(sysfsbuf, NULL, 10); ++ ++ if (length == 2) { ++ if (value > 0xffff) ++ return -EINVAL; ++ ++ buffer[0] = (value >> 8) & 0xff; ++ buffer[1] = value & 0xff; ++ } else if (length == 1) { ++ if (value > 0xff) ++ return -EINVAL; ++ ++ buffer[0] = value & 0xff; ++ } else { ++ printk("Invalid length for applesmc_param_store"); ++ return -EINVAL; ++ } ++ ++ mutex_lock(&applesmc_lock); ++ ++ ret = applesmc_write_key(key, buffer, length); ++ ++ mutex_unlock(&applesmc_lock); ++ ++ if (ret) ++ return ret; ++ else ++ return count; ++} ++ + static struct led_classdev applesmc_backlight = { + .name = "smc:kbd_backlight", + .default_trigger = "nand-disk", +@@ -943,10 +1206,22 @@ static DEVICE_ATTR(name, 0444, applesmc_name_show, NULL); + static DEVICE_ATTR(position, 0444, applesmc_position_show, NULL); + static DEVICE_ATTR(calibrate, 0644, + applesmc_calibrate_show, applesmc_calibrate_store); ++static SENSOR_DEVICE_ATTR(low_norm_trigger_interval, 0644, ++ applesmc_accelerometer_show, applesmc_accelerometer_store, 0); ++static SENSOR_DEVICE_ATTR(high_norm_trigger_interval, 0644, ++ applesmc_accelerometer_show, applesmc_accelerometer_store, 1); ++static SENSOR_DEVICE_ATTR(low_norm_trigger, 0644, ++ applesmc_accelerometer_show, applesmc_accelerometer_store, 2); ++static SENSOR_DEVICE_ATTR(high_norm_trigger, 0644, ++ applesmc_accelerometer_show, applesmc_accelerometer_store, 3); + + static struct attribute *accelerometer_attributes[] = { + &dev_attr_position.attr, + &dev_attr_calibrate.attr, ++ &sensor_dev_attr_low_norm_trigger.dev_attr.attr, ++ &sensor_dev_attr_high_norm_trigger.dev_attr.attr, ++ &sensor_dev_attr_low_norm_trigger_interval.dev_attr.attr, ++ &sensor_dev_attr_high_norm_trigger_interval.dev_attr.attr, + NULL + }; + diff --git a/sys-kernel/mactel-linux-sources/files/2.6.24-mactel-patches-r145/appletouch.patch b/sys-kernel/mactel-linux-sources/files/2.6.24-mactel-patches-r145/appletouch.patch new file mode 100644 index 0000000..d09b12a --- /dev/null +++ b/sys-kernel/mactel-linux-sources/files/2.6.24-mactel-patches-r145/appletouch.patch @@ -0,0 +1,23 @@ +Appletouch driver ATP_THRESHOLD fix. + +From: Ortwin Glück <odi@odi.ch> + + +--- + + drivers/input/mouse/appletouch.c | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c +index b4423a4..17381a9 100644 +--- a/drivers/input/mouse/appletouch.c ++++ b/drivers/input/mouse/appletouch.c +@@ -127,7 +127,7 @@ MODULE_DEVICE_TABLE (usb, atp_table); + * Threshold for the touchpad sensors. Any change less than ATP_THRESHOLD is + * ignored. + */ +-#define ATP_THRESHOLD 5 ++#define ATP_THRESHOLD 3 + + /* Geyser initialization constants */ + #define ATP_GEYSER_MODE_READ_REQUEST_ID 1 diff --git a/sys-kernel/mactel-linux-sources/files/2.6.24-mactel-patches-r145/sigmatel_audio_display_all_controls_when_subsystem_id_is_wrong.patch b/sys-kernel/mactel-linux-sources/files/2.6.24-mactel-patches-r145/sigmatel_audio_display_all_controls_when_subsystem_id_is_wrong.patch new file mode 100644 index 0000000..f7b4cb9 --- /dev/null +++ b/sys-kernel/mactel-linux-sources/files/2.6.24-mactel-patches-r145/sigmatel_audio_display_all_controls_when_subsystem_id_is_wrong.patch @@ -0,0 +1,28 @@ +Display Macbook Pro 1st gen controls when the subsystem id is wrong (0x100). + +From: Nicolas Boichat <nicolas@boichat.ch> + + +--- + + sound/pci/hda/patch_sigmatel.c | 4 +++- + 1 files changed, 3 insertions(+), 1 deletions(-) + +diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c +index 0401223..c0e626b 100644 +--- a/sound/pci/hda/patch_sigmatel.c ++++ b/sound/pci/hda/patch_sigmatel.c +@@ -2587,10 +2587,12 @@ static int patch_stac922x(struct hda_codec *codec) + case 0x106b1700: + case 0x106b0200: + case 0x106b1e00: ++ case 0x100: /* Invalid subsystem ID, happens randomly on ++ * MacBook Pro 1st generation ++ */ + spec->board_config = STAC_INTEL_MAC_V3; + break; + case 0x106b1a00: +- case 0x00000100: + spec->board_config = STAC_INTEL_MAC_V4; + break; + case 0x106b0a00: diff --git a/sys-kernel/mactel-linux-sources/files/2.6.24-mactel-patches-r145/sigmatel_audio_fix_macbook_v2.patch b/sys-kernel/mactel-linux-sources/files/2.6.24-mactel-patches-r145/sigmatel_audio_fix_macbook_v2.patch new file mode 100644 index 0000000..a559167 --- /dev/null +++ b/sys-kernel/mactel-linux-sources/files/2.6.24-mactel-patches-r145/sigmatel_audio_fix_macbook_v2.patch @@ -0,0 +1,30 @@ +Fixes audio on Macbook v2. + +From: Marek Sterzik <marek@milimetr.org> + + +--- + + sound/pci/hda/patch_sigmatel.c | 2 ++ + 1 files changed, 2 insertions(+), 0 deletions(-) + +diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c +index c0e626b..e7995f6 100644 +--- a/sound/pci/hda/patch_sigmatel.c ++++ b/sound/pci/hda/patch_sigmatel.c +@@ -81,6 +81,7 @@ enum { + /* for backward compatibility */ + STAC_MACMINI, + STAC_MACBOOK, ++ STAC_MACBOOK_V2, + STAC_MACBOOK_PRO_V1, + STAC_MACBOOK_PRO_V2, + STAC_IMAC_INTEL, +@@ -905,6 +906,7 @@ static const char *stac922x_models[STAC_922X_MODELS] = { + /* for backward compatibility */ + [STAC_MACMINI] = "macmini", + [STAC_MACBOOK] = "macbook", ++ [STAC_MACBOOK_V2] = "macbook-v2", + [STAC_MACBOOK_PRO_V1] = "macbook-pro-v1", + [STAC_MACBOOK_PRO_V2] = "macbook-pro", + [STAC_IMAC_INTEL] = "imac-intel", diff --git a/sys-kernel/mactel-linux-sources/files/digest-mactel-linux-sources-2.6.24 b/sys-kernel/mactel-linux-sources/files/digest-mactel-linux-sources-2.6.24 new file mode 100644 index 0000000..59b9408 --- /dev/null +++ b/sys-kernel/mactel-linux-sources/files/digest-mactel-linux-sources-2.6.24 @@ -0,0 +1,9 @@ +MD5 d76ade4e81deb31d9bb231f43405a1e2 genpatches-2.6.24-1.base.tar.bz2 960 +RMD160 a7b9932bc33e8a56da4bfafbdf16749bf141db6c genpatches-2.6.24-1.base.tar.bz2 960 +SHA256 3f7c948b72494aed970be1187a75c7c8573ad500e35c5bc9610b87ffa42bd54f genpatches-2.6.24-1.base.tar.bz2 960 +MD5 225027f6569dd5cb7df915d0e0cff967 genpatches-2.6.24-1.extras.tar.bz2 41902 +RMD160 259b831110120518149bbccdacf9982330af5ef0 genpatches-2.6.24-1.extras.tar.bz2 41902 +SHA256 bc8723863cace59d8bcb6d84d678cc9c370a5e2144133f543396b45e4655b063 genpatches-2.6.24-1.extras.tar.bz2 41902 +MD5 3f23ad4b69d0a552042d1ed0f4399857 linux-2.6.24.tar.bz2 46737783 +RMD160 0e5194c69c3d82c41ece689c4f84e638f8776d34 linux-2.6.24.tar.bz2 46737783 +SHA256 413c64fbbcf81244cb5571be4963644a1e81166a2b0f008a016528363b65c5d3 linux-2.6.24.tar.bz2 46737783 |