rsyslog bumped in g-x86

13 files changed, 0 insertions, 963 deletions

diff --git a/app-admin/rsyslog/Manifest b/app-admin/rsyslog/Manifest
deleted file mode 100644
index d06c4dd..0000000
--- a/app-admin/rsyslog/Manifest
+++ /dev/null
@@ -1,13 +0,0 @@
-AUX 7-stable/50-default.conf 1701 SHA256 61c1dd1450f574a21a8d8375faaf3e42f9856df91011150ff13c0cfddc86ed41 SHA512 33e4e63239b9112fec1a37115ac80ab8dbd6e7189d9d29b1bc743c433e0124ea0d1a4cf6f7ada9e5b92e9b0025b6617a1a16f4c491e743bbf4327a5f376a1ea9 WHIRLPOOL d33b83bb690e78b5e5f7cfc090d21da03615c891a287b1f3a92a51514dcad1f5dfe8d2ceed867b3007768d47f48d207fac43a1ff33a85b24c21a5531cdf9d311
-AUX 7-stable/README.gentoo 1126 SHA256 29b4c68f521f2f1f138f44c4635da1a270fed9cbd4a780569754080987aa777c SHA512 46fdf3350e2005d3ef588d50dfc6d474a1b5d3010329b656879a43cbbd7be0cd91944b88d3838f45f69c830fc28c42e7fac2cd52e0a4b24bb6780562d59ae384 WHIRLPOOL a1a3ec8b887110a01e8c1c1320f25493dd8ff343e4b08780c30c9bc3bb842afa0ef79db08195db876697c1a69807f49a8b3793609d25f78559fa534507fc195e
-AUX 7-stable/bugfix_52.patch 3776 SHA256 756f7630fa2c14d9605ce560f608acdc66277abb4592feec11dc05ef9ecc01cc SHA512 1b4fb7efd2a9e3a5b16003124e63ff5434512d9d103d938d2cfaf9ceb6087bad83d5141c21bd1d13b8dad7c67b58e0359fc836dc8263652eafd5404d181b0a4f WHIRLPOOL f0062ca640e11957da6621d8e73189e6be9eca275adfff32e3f701235682535cc42d34709a9c912541764af3d74073afd82c8d8048a3521eab9b70f8198ea02d
-AUX 7-stable/bugfix_73.patch 3575 SHA256 f621d578f730c8d633e42af977077f3c67e894acd4e8c7702dd6a41e85232062 SHA512 67996a804673214e4c23ceaf8c0092a1cf8288024180c047b96b773ee55db05e95b8da4b73ea0db5cdfabc8b49a632d6b313cf54dad23a80d9fd1bf243590971 WHIRLPOOL 371ded4813d1f3b65e570eefd366c1ca9ffabf38b1b5b5b80d6d632b3574bea272a8a802ec2b956d69359ac8f44c5b66d0c0ed66d898dbe96784a9090c4585a3
-AUX 7-stable/fix-omruleset-default-value.patch 834 SHA256 9b9506a1141ef8619ba98e4bb8e2c8ad23e6a51e64d971db8ee461c073ef1ae0 SHA512 64113caf4ec31100f1ad4dbfef27ac39e6be09f0560b1a77ad54b2c7aaf8469780b4ba17ef892cbcf80931a4d7070b40b4ca22265553568d2302eaf5ab976e5e WHIRLPOOL 7aa020772813d2611c90f7605497ece6f1ed32c1e3b75f0fc7360492186dfe0b522275d128c185013c1849b64c7c1550f1752397239609f18583a475f44361cf
-AUX 7-stable/rsyslog-7.x-mmjsonparse.patch 952 SHA256 8db6b4c0001ae53306ceb685ef245c6978e143c71c9642e634cbed98e6d2dde8 SHA512 4446349f75ff5726d1bffe261f607dd8710c31d1254925928ffcc825a0f86d96b281962150bfa8e85846b94610d0a15f0932ef6b041d390bd4402657ad0f47b7 WHIRLPOOL 1ba7a6db2cb753953f0ae8e701a9b7150b99bf553b653ba2b82c6f6d1bf76461efa1cbfb1d026e5e459069cbfc6e868d46743e38c9a01583b1ff4f7a4225ed69
-AUX 7-stable/rsyslog.conf 1562 SHA256 fc70a94213b5eb519febf9aa7d758ee9526433bcc5683bcb7451d16e65a2f5b0 SHA512 1720174fab020e2de590f3d6bbb03784aca1928fe05f7e75e02fb4597cb8b2ee755e6deb8e8f989060511044ae483f791f496f24e0eecaf27eb9e0b5e20a2c7a WHIRLPOOL 97cf3fdee62a9339b412ebe93b71b2d6804df60aad9cb7e71779fcaddb01d489e38bbb353557864ea38aba384e664e6da636812c3c078ed9e22e261ed7b78cba
-AUX 7-stable/rsyslog.confd-r1 1140 SHA256 f0b15a0334f6177a6cf23cb9b169302c75745dc30857f24a7d11892feb6b1ee4 SHA512 8501be8d0abc166994863db61afa5a4ef120aaec601d86fb71711b557741d39b29b96a4d688e7af6ad8d5d15a1257821ca299c5f7391f2ce66cd95e33ea2ff7c WHIRLPOOL 0a3617defa10acfa693a3339e1f7ec69c9272b44aac6fda30b49452f32ea7037743acfd871cea025f1e584639725588286056db6e17663c2806ed47088600d35
-AUX 7-stable/rsyslog.initd-r1 1597 SHA256 30615d3d29155675e09fa1082a5851fb6e260e1f914d899b7fd23430a2b95249 SHA512 5dd92f557831e6ecd9c6acfea2a7168fbc40cca10c7dd9241097c58dd7369e39fab7c7f988d0e4450c258c18886e3769715d0b6feb632023daa8f6d178cae18f WHIRLPOOL 61ca87c8f21ccbabc449fe0dc4743cbaa259a12e903ae8ba5c01b04e7a21dc867fc37334350c78e1d3a5a2c7233b880c6affe00f205384c57fe79e0ed3a1512a
-AUX 7-stable/rsyslog.logrotate-r1 682 SHA256 89cc8f13c1f7a3ae446b40da7b31cdf471e2c9e2d3d5b8f48e524f7a82fbff89 SHA512 6c58abd2f02157177a61695f53eccbf201c514821b0c551a4812621e8d3dd2da9b5cd651d93860cb51ebdbdc7056d0ef0dde99c2a57ac3c43aa968a141805912 WHIRLPOOL 9d29c2c9351252887c3dad78962df942bb1cd7387eb44e3c98764319f82d90c42d255a5642c55bb37811fb903e1c5314ca536bc9d32ccfd0535f0579f4e25ff0
-DIST rsyslog-7.6.3.tar.gz 3052448 SHA256 013359035f8b6e5a4328edaffbda1120974accaba36ddc5de66a582fa588f5ec SHA512 f5bafbf7e40011e583a01d20beb1a98b78512cd537128c8f925c27b1906b22471b98d11e58c41256570fc205ec7ca756219d5cf44041ffe4e613fbd802d1f309 WHIRLPOOL 23719d6451eec4d21b022dfc2701726a00adeb132f8fe7e93826fba8693edbf949d7b6a9f3fac358482ee86b65fbccfd25330a6bbbd522e92bfc659bf01ec243
-EBUILD rsyslog-7.6.3.ebuild 9198 SHA256 e477a6511cc50f29d0a124ff6c071ef3d44929b2366d4157f6c021a9cbd1e5be SHA512 04eb75d3667b357091e4189d258c45a71b7806df0edc4c3f17228e7253740e22337f93e682854ed15df17afd96bb6df0726e94c4b6974e1d9c6b718589534c80 WHIRLPOOL 4880f7e37d0a8651645958c5139dbf741f47e17ac3c8cd5448783c5392bf4d7071d30347d9d42fd8ce3063387053bc3bb4200e13bcceb5e7f94b8ac50f4bd35a
-MISC metadata.xml 2941 SHA256 3d75473e17679907bf3170ec29f377f6eac2ee67408685015de41584713a68c1 SHA512 57b479b75864889ce2b143921c7e717229ba88f1eb470db0c6d2b151a5061b2b6fc5138b50c6e96c1d715ac0d05d48ed4c34375d42c0ea9cc3703c4f92625c44 WHIRLPOOL 70bfd3127b8f630e009d5226de5fc39b42a6f188069f68aead8986661516b171879bccb82cf1d444c150dd004cddddf9402e60e2d3ce43f1108171ffe84ec304
diff --git a/app-admin/rsyslog/files/7-stable/50-default.conf b/app-admin/rsyslog/files/7-stable/50-default.conf
deleted file mode 100644
index 9ae8578..0000000
--- a/app-admin/rsyslog/files/7-stable/50-default.conf
+++ /dev/null
@@ -1,95 +0,0 @@
-#######################
-### DEFAULT ACTIONS ###
-#######################
-
-auth,authpriv.* action(
-	type="omfile"
-	File="/var/log/auth.log"
-	FileCreateMode="0600"
-	FileOwner="root"
-	FileGroup="adm"
-	Sync="off"
-)
-
-cron.* action(
-	type="omfile"
-	File="/var/log/cron.log"
-	FileOwner="root"
-	FileGroup="adm"
-)
-
-daemon.* action(
-	type="omfile"
-	File="/var/log/daemon.log"
-	FileOwner="root"
-	FileGroup="adm"
-)
-
-kern.* action(
-	type="omfile"
-	File="/var/log/kern.log"
-	FileOwner="root"
-	FileGroup="adm"
-)
-
-lpr.* action(
-	type="omfile"
-	File="/var/log/lpr.log"
-	FileOwner="root"
-	FileGroup="adm"
-)
-
-mail.* action(
-	type="omfile"
-	File="/var/log/mail.log"
-	FileOwner="root"
-	FileGroup="adm"
-)
-
-news.* action(
-	type="omfile"
-	File="/var/log/news.log"
-	FileOwner="root"
-	FileGroup="adm"
-)
-
-user.* action(
-	type="omfile"
-	File="/var/log/user.log"
-	FileOwner="root"
-	FileGroup="adm"
-)
-
-*.=debug;auth,authpriv,news,mail.none action(
-	type="omfile"
-	File="/var/log/debug.log"
-	FileOwner="root"
-	FileGroup="adm"
-)
-
-*.info;auth,authpriv,cron,daemon,lpr,mail,news.none action(
-	type="omfile"
-	File="/var/log/messages"
-	FileOwner="root"
-	FileGroup="adm"
-)
-
-# Uncomment the following directive to re-enable the
-# deprecated "/var/log/syslog" log file (don't forget to re-enable log
-# rotation in "/etc/logrotate.d/rsyslog" if you do that!)
-#*.*;auth,authpriv.none action(
-#	type="omfile"
-#	File="/var/log/syslog"
-#	FileOwner="root"
-#	FileGroup="adm"
-#)
-
-*.emerg action(
-	type="omusrmsg"
-	Users="*"
-	action.execOnlyOnceEveryInterval="10"
-)
-
-# Create an additional socket for the default chroot location
-# (used by net-misc/openssh[hpn], see https://bugs.gentoo.org/490744)
-input(type="imuxsock" Socket="/var/empty/dev/log")
diff --git a/app-admin/rsyslog/files/7-stable/README.gentoo b/app-admin/rsyslog/files/7-stable/README.gentoo
deleted file mode 100644
index 9f0666c..0000000
--- a/app-admin/rsyslog/files/7-stable/README.gentoo
+++ /dev/null
@@ -1,36 +0,0 @@
-Introduction
-============
-
-Since rsyslog version 7.6 we are shipping a new default Gentoo
-configuration. See bug #501982 to learn more about what we were trying to
-achieve by rewriting the entire configuration.
-
-
-Important changes
-=================
-
-1. "/var/log/syslog" log file is now deprecated
-
-   Beginning with rsyslog-7.6, the "/var/log/syslog" log file will no
-   longer being written per default. We are considering this file as
-   deprecated/obsolet for the typical user/system.
-   The content from this log file is still availble through other
-   (dedicated) log files, see
-   
-     - /var/log/cron.log
-     - /var/log/daemon.log
-     - /var/log/mail.log
-     - /var/log/messages
-   
-   If you really need the old "/var/log/syslog" log file, all you have to
-   do is uncommenting the corresponding configuration directive in
-   "/etc/rsyslog.d/50-default.conf".
-   
-   If you do so, don't forget to re-enable log rotation in
-   "/etc/logrotate.d/rsyslog", too.
-
-
-2. An additional input socket in "/var/empty/dev/log" (default chroot
-   location) will be created per default
-
-   See bug #490744 for further details.
diff --git a/app-admin/rsyslog/files/7-stable/bugfix_52.patch b/app-admin/rsyslog/files/7-stable/bugfix_52.patch
deleted file mode 100644
index f5da7b9..0000000
--- a/app-admin/rsyslog/files/7-stable/bugfix_52.patch
+++ /dev/null
@@ -1,100 +0,0 @@
-From b017e29aad70702c69e6016b07a932b7825a83e5 Mon Sep 17 00:00:00 2001
-From: Thomas D <whissi@whissi.de>
-Date: Sat, 3 May 2014 14:45:25 +0200
-Subject: [PATCH] Remove "--enable-cached-man-pages" switch and make rst2man
- optional when required man pages already exist
-
-This commit backports the bugfix for issue #52 for the v7-stable branch.
----
- configure.ac | 61 +++++++++++++++++++++++++++++++++++-------------------------
- 1 file changed, 36 insertions(+), 25 deletions(-)
-
-diff --git a/configure.ac b/configure.ac
-index 0dd40c2..07d96dd 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -1087,30 +1087,6 @@ fi
- AM_CONDITIONAL(ENABLE_GUARDTIME, test x$enable_guardtime = xyes)
- 
- 
--# Support using cached man file copies, to avoid the need for rst2man
--# in the build environment
--AC_ARG_ENABLE(cached_man_pages,
--        [AS_HELP_STRING([--enable-cached-man-pages],[Enable using cached versions of man files (avoid rst2man) @<:@default=no@:>@])],
--        [case "${enableval}" in
--         yes) enable_cached_man_pages="yes" ;;
--          no) enable_cached_man_pages="no" ;;
--           *) AC_MSG_ERROR(bad value ${enableval} for --enable-cached-man-pages) ;;
--         esac],
--        [enable_cached_man_pages=no]
--)
--if test "x$enable_cached_man_pages" = "xno"; then
--# obtain path for rst2man
--  if test "x$enable_libgcrypt" = "xyes" || \
--     test "x$enable_guardtime" = "xyes"; then
--        AC_PATH_PROG([RST2MAN], [rst2man])
--        if test "x${RST2MAN}" == "x"; then
--            AC_MSG_FAILURE([rst2man not found in PATH])
--        fi
--  fi
--fi
--
--
--
- # RFC 3195 support
- AC_ARG_ENABLE(rfc3195,
-         [AS_HELP_STRING([--enable-rfc3195],[Enable RFC3195 support @<:@default=no@:>@])],
-@@ -1519,6 +1495,41 @@ AM_CONDITIONAL(ENABLE_OMHIREDIS, test x$enable_omhiredis = xyes)
- 
- # END HIREDIS SUPPORT
- 
-+
-+AC_CHECKING([if required man pages already exist])
-+have_to_generate_man_pages="no"
-+
-+# man pages for libgcrypt module
-+if test "x$enable_usertools" = "xyes" && test "x$enable_libgcrypt" = "xyes"; then
-+    AC_CHECK_FILES(["tools/rscryutil.1" "tools/rsgtutil.1"],
-+        [],
-+        [have_to_generate_man_pages="yes"]
-+    )
-+fi
-+
-+# man pages for GuardTime module
-+if test "x$enable_usertools" = "xyes" && test "x$enable_guardtime" = "xyes"; then
-+    AC_CHECK_FILES(["tools/rscryutil.1" "tools/rsgtutil.1"],
-+        [],
-+        [have_to_generate_man_pages="yes"]
-+    )
-+fi
-+
-+if test "x$have_to_generate_man_pages" = "xyes"; then
-+    AC_MSG_RESULT([Some man pages are missing. We need rst2man to generate the missing man pages from source...])
-+else
-+    AC_MSG_RESULT([All required man pages found. We don't need rst2man!])
-+fi
-+
-+if test "x$have_to_generate_man_pages" = "xyes"; then
-+    # We need rst2man to generate our man pages
-+    AC_CHECK_PROGS([RST2MAN], [rst2man rst2man.py], [])
-+    if test -z "$RST2MAN"; then
-+        AC_MSG_ERROR([rst2man is required to build man pages. You can use the release tarball with pregenerated man pages to avoid this depedency.])
-+    fi
-+fi
-+
-+
- AC_CONFIG_FILES([Makefile \
- 		runtime/Makefile \
- 		compat/Makefile \
-@@ -1594,7 +1605,7 @@ echo "    Zlib compression support enabled:         $enable_zlib"
- echo "    rsyslog runtime will be built:            $enable_rsyslogrt"
- echo "    rsyslogd will be built:                   $enable_rsyslogd"
- echo "    GUI components will be built:             $enable_gui"
--echo "    cached man files will be used:            $enable_cached_man_pages"
-+echo "    have to generate man pages:               $have_to_generate_man_pages"
- echo "    Unlimited select() support enabled:       $enable_unlimited_select"
- echo "    uuid support enabled:                     $enable_uuid"
- echo "    Log file signing support:                 $enable_guardtime"
--- 
-1.9.2
-
diff --git a/app-admin/rsyslog/files/7-stable/bugfix_73.patch b/app-admin/rsyslog/files/7-stable/bugfix_73.patch
deleted file mode 100644
index cc295d6..0000000
--- a/app-admin/rsyslog/files/7-stable/bugfix_73.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-This patch will update the pre-generated rscryutil man page from the release
-tarball so we don't need to depend on dev-python/docutils.
-
-https://github.com/rsyslog/rsyslog/issues/73
-
-diff -rupN old/rsyslog-7.6.3/tools/rscryutil.1 new/rsyslog-7.6.3/tools/rscryutil.1
---- old/rsyslog-7.6.3/tools/rscryutil.1	2013-10-29 16:31:21.000000000 +0100
-+++ new/rsyslog-7.6.3/tools/rscryutil.1	2014-05-03 20:41:46.143825094 +0200
-@@ -1,4 +1,4 @@
--.\" Man page generated from reStructeredText.
-+.\" Man page generated from reStructuredText.
- .
- .TH RSCRYUTIL 1 "2013-04-15" "" ""
- .SH NAME
-@@ -31,12 +31,16 @@ level margin: \\n[rst2man-indent\\n[rst2
- .in \\n[rst2man-indent\\n[rst2man-indent-level]]u
- ..
- .SH SYNOPSIS
-+.INDENT 0.0
-+.INDENT 3.5
- .sp
- .nf
- .ft C
- rscryutil [OPTIONS] [FILE] ...
- .ft P
- .fi
-+.UNINDENT
-+.UNINDENT
- .SH DESCRIPTION
- .sp
- This tool performs various operations on encrypted log files.
-@@ -44,46 +48,46 @@ Most importantly, it provides the abilit
- .SH OPTIONS
- .INDENT 0.0
- .TP
--.B \-d,  \-\-decrypt
-+.B \-d\fP,\fB  \-\-decrypt
- Select decryption mode. This is the default mode.
- .TP
--.BI \-W,  \-\-write\-keyfile \ <file>
-+.BI \-W\fP,\fB  \-\-write\-keyfile \ <file>
- Utility function to write a key to a keyfile. The key can be obtained
- via any method.
- .TP
--.B \-v,  \-\-verbose
-+.B \-v\fP,\fB  \-\-verbose
- Select verbose mode.
- .TP
--.B \-f,  \-\-force
-+.B \-f\fP,\fB  \-\-force
- Forces operations that otherwise would fail.
- .TP
--.BI \-k,  \-\-keyfile \ <file>
-+.BI \-k\fP,\fB  \-\-keyfile \ <file>
- Reads the key from <file>. File _must_ contain the key, only, no headers
- or other meta information. Keyfiles can be generated via the
- \fI\-\-write\-keyfile\fP option.
- .TP
--.BI \-p,  \-\-key\-program \ <path\-to\-program>
-+.BI \-p\fP,\fB  \-\-key\-program \ <path\-to\-program>
- In this mode, the key is provided by a so\-called "key program". This program
- is executed and must return the key to (as well as some meta information)
- via stdout. The core idea of key programs is that using this interface the
- user can implement as complex (and secure) method to obtain keys as
- desired, all without the need to make modifications to rsyslog.
- .TP
--.BI \-K,  \-\-key \ <KEY>
-+.BI \-K\fP,\fB  \-\-key \ <KEY>
- TESTING AID, NOT FOR PRODUCTION USE. This uses the KEY specified
- on the command line. This is the actual key, and as such this mode
- is highly insecure. However, it can be useful for intial testing
- steps. This option may be removed in the future.
- .TP
--.BI \-a,  \-\-algo \ <algo>
-+.BI \-a\fP,\fB  \-\-algo \ <algo>
- Sets the encryption algorightm (cipher) to be used. See below
- for supported algorithms. The default is "AES128".
- .TP
--.BI \-m,  \-\-mode \ <mode>
-+.BI \-m\fP,\fB  \-\-mode \ <mode>
- Sets the ciphermode to be used. See below for supported modes.
- The default is "CBC".
- .TP
--.BI \-r,  \-\-generate\-random\-key \ <bytes>
-+.BI \-r\fP,\fB  \-\-generate\-random\-key \ <bytes>
- Generates a random key of length <bytes>. This option is
- meant to be used together with \fI\-\-write\-keyfile\fP (and it is hard
- to envision any other valid use for it).
-@@ -97,7 +101,7 @@ multiple operations mode are set on the
- unpredictable.
- .SS decrypt
- .sp
--The provided log files are decrypted. Note that the \fI.encinfo\fP side files
-+The provided log files are decrypted. Note that the \fI\&.encinfo\fP side files
- must exist and be accessible in order for decryption to to work.
- .SS write\-keyfile
- .sp
-@@ -198,5 +202,4 @@ LGPLv2.
- .SH AUTHOR
- Rainer Gerhards <rgerhards@adiscon.com>
- .\" Generated by docutils manpage writer.
--.\" 
- .
diff --git a/app-admin/rsyslog/files/7-stable/fix-omruleset-default-value.patch b/app-admin/rsyslog/files/7-stable/fix-omruleset-default-value.patch
deleted file mode 100644
index 816471c..0000000
--- a/app-admin/rsyslog/files/7-stable/fix-omruleset-default-value.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 14f3b45151864aa4170de515f406a69ad2931eba Mon Sep 17 00:00:00 2001
-From: Rainer Gerhards <rgerhards@adiscon.com>
-Date: Thu, 31 Oct 2013 18:21:47 +0100
-Subject: [PATCH] module omruleset is no longer enabled by default.
-
-Note that it has been deprecated in v7 and been replaced by the "call"
-statement. Also, it can still be build without problems, the option must
-just explicitely be given.
----
-diff --git a/configure.ac b/configure.ac
-index 3abd559..de4c3ea 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -1353,7 +1353,7 @@ AC_ARG_ENABLE(omruleset,
-           no) enable_omruleset="no" ;;
-            *) AC_MSG_ERROR(bad value ${enableval} for --enable-omruleset) ;;
-          esac],
--        [enable_omruleset=yes]
-+        [enable_omruleset=no]
- )
- AM_CONDITIONAL(ENABLE_OMRULESET, test x$enable_omruleset = xyes)
- 
--- 
-1.9.1
-
diff --git a/app-admin/rsyslog/files/7-stable/rsyslog-7.x-mmjsonparse.patch b/app-admin/rsyslog/files/7-stable/rsyslog-7.x-mmjsonparse.patch
deleted file mode 100644
index ad5c8ea..0000000
--- a/app-admin/rsyslog/files/7-stable/rsyslog-7.x-mmjsonparse.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From d6f5d5aae579455badb2d546f8ef292956720824 Mon Sep 17 00:00:00 2001
-From: Thomas D <whissi@whissi.de>
-Date: Tue, 15 Apr 2014 17:56:05 +0200
-Subject: [PATCH] Fix for https://github.com/rsyslog/rsyslog/issues/61
-
-Based on Maxim Koltsov proposed patch from https://bugs.gentoo.org/show_bug.cgi?id=507730
----
- plugins/mmjsonparse/mmjsonparse.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/plugins/mmjsonparse/mmjsonparse.c b/plugins/mmjsonparse/mmjsonparse.c
-index b16aef0..a5bfaa2 100644
---- a/plugins/mmjsonparse/mmjsonparse.c
-+++ b/plugins/mmjsonparse/mmjsonparse.c
-@@ -146,7 +146,7 @@ processJSON(instanceData *pData, msg_t *pMsg, char *buf, size_t lenBuf)
- 
- 			err = pData->tokener->err;
- 			if(err != json_tokener_continue)
--				errMsg = json_tokener_errors[err];
-+				errMsg = json_tokener_error_desc(err);
- 			else
- 				errMsg = "Unterminated input";
- 		} else if((size_t)pData->tokener->char_offset < lenBuf)
--- 
-1.9.1
-
diff --git a/app-admin/rsyslog/files/7-stable/rsyslog.conf b/app-admin/rsyslog/files/7-stable/rsyslog.conf
deleted file mode 100644
index da48459..0000000
--- a/app-admin/rsyslog/files/7-stable/rsyslog.conf
+++ /dev/null
@@ -1,61 +0,0 @@
-# /etc/rsyslog.conf
-# 
-# This configuration is based on RainerScript, the new recommended syntax
-# for RSYSLOG. See http://www.rsyslog.com/doc/rainerscript.html for further
-# details.
-# 
-# But if you don't want to learn something new at moment, don't worry: The
-# legacy syntax is still supported.
-# 
-# You may want to use the new RSYSLOG configuration builder to create your
-# own more advanced configuration: http://www.rsyslog.com/rsyslog-configuration-builder/
-
-# Check config syntax on startup and abort if unclean (default: off)
-#$AbortOnUncleanConfig on
-
-
-###############
-### MODULES ###
-###############
-
-# Read syslog messages from default Unix socket /dev/log (e.g. via logger command)
-module(load="imuxsock")
-
-# Read messages from the kernel log and submits them to the syslog engine
-module(load="imklog")
-
-# Inject "--MARK--" messages every $Interval (seconds)
-#module(load="immark" Interval="600")
-
-# Read syslog messages from UDP
-#module(load="imudp")
-#input(type="imudp" port="514")
-
-# Read syslog messages from TCP
-#module(load="imtcp")
-#input(type="imtcp" port="514")
-
-
-#########################
-### GLOBAL DIRECTIVES ###
-#########################
-
-# Where to place spool and state files
-$WorkDirectory /var/spool/rsyslog
-
-# Reduce repeating messages (default: off)
-#$RepeatedMsgReduction on
-
-# Set defaults for every output file
-$Umask 0022
-
-module(
-	load="builtin:omfile"
-	Template="RSYSLOG_TraditionalFileFormat"
-	FileCreateMode="0644"
-	DirCreateMode="0755"
-)
-
-
-# Include all conf files in /etc/rsyslog.d/
-$IncludeConfig /etc/rsyslog.d/*.conf
diff --git a/app-admin/rsyslog/files/7-stable/rsyslog.confd-r1 b/app-admin/rsyslog/files/7-stable/rsyslog.confd-r1
deleted file mode 100644
index d8cbe87..0000000
--- a/app-admin/rsyslog/files/7-stable/rsyslog.confd-r1
+++ /dev/null
@@ -1,30 +0,0 @@
-# /etc/conf.d/rsyslog
-
-# Configuration file
-RSYSLOG_CONFIGFILE="/etc/rsyslog.conf"
-
-# PID file
-# If you should ever change this, remember to update
-# "/etc/logrotate.d/rsyslog", too.
-RSYSLOG_PIDFILE="/run/rsyslogd.pid"
-
-# You can use this configuration option to pass additional options to the
-# start-stop-daemon, see start-stop-daemon(8) for more details.
-# Per default we wait 1000ms after we have started the service to ensure
-# that the daemon is really up and running.
-RSYSLOG_SSDARGS="--wait 1000"
-
-# The termination timeout (start-stop-daemon parameter "retry") ensures
-# that the service will be terminated within a given time (60 + 5 seconds
-# per default) when you are stopping the service.
-# You need to increase the value when you are working with a large queue.
-# See http://www.rsyslog.com/doc/queues.html for further information.
-RSYSLOG_TERMTIMEOUT="TERM/60/KILL/5"
-
-
-# Options to rsyslogd
-# See rsyslogd(8) for more details
-# Notes:
-# * Do not specify another PIDFILE but use the variable above to change the location
-# * Do not specify another CONFIGFILE but use the variable above to change the location
-RSYSLOG_OPTS=""
diff --git a/app-admin/rsyslog/files/7-stable/rsyslog.initd-r1 b/app-admin/rsyslog/files/7-stable/rsyslog.initd-r1
deleted file mode 100644
index bc326f4..0000000
--- a/app-admin/rsyslog/files/7-stable/rsyslog.initd-r1
+++ /dev/null
@@ -1,69 +0,0 @@
-#!/sbin/runscript
-# Copyright 1999-2014 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: $
-
-RSYSLOG_CONFIGFILE=${RSYSLOG_CONFIGFILE:-"/etc/rsyslog.conf"}
-RSYSLOG_PIDFILE=${RSYSLOG_PIDFILE:-"/run/rsyslogd.pid"}
-
-command="/usr/sbin/rsyslogd"
-command_args="${RSYSLOG_OPTS} -f ${RSYSLOG_CONFIGFILE} -i ${RSYSLOG_PIDFILE}"
-start_stop_daemon_args="${RSYSLOG_SSDARGS}"
-pidfile="${RSYSLOG_PIDFILE}"
-retry="${RSYSLOG_TERMTIMEOUT}"
-
-required_files=( "${RSYSLOG_CONFIGFILE}" )
-
-description="RSYSLOG is the rocket-fast system for log processing (syslog replacement)."
-
-extra_commands="configtest"
-extra_started_commands="rotate"
-
-description_configtest="Run rsyslogd's internal config check."
-
-description_rotate="Sends rsyslogd a signal to re-open its log files."
-
-depend() {
-	need clock hostname localmount
-	provide logger
-}
-
-start_pre() {
-	if [ "${RC_CMD}" != "restart" ]; then
-		configtest || return 1
-	fi
-}
-
-stop_pre() {
-	if [ "${RC_CMD}" = "restart" ]; then
-		configtest || return 1
-	fi
-}
-
-stop_post() {
-	rm -f ${RSYSLOG_PIDFILE}
-}
-
-configtest() {
-	# This will currently only detect fatal errors
-	# See https://github.com/rsyslog/rsyslog/issues/79
-
-	local _test_command="${command} -N 999 -f ${RSYSLOG_CONFIGFILE}"
-	local _retval=0
-
-	ebegin "Checking rsyslogd's configuration"
-	${_test_command} &>/dev/null
-	_retval=$?
-
-	if [ ${_retval} -ne 0 ]; then
-		${_test_command}
-	fi
-
-	eend ${_retval} "failed, please correct errors above"
-}
-
-rotate() {
-	ebegin "Re-opening rsyslogd logs"
-	start-stop-daemon --signal SIGHUP --pidfile "${RSYSLOG_PIDFILE}"
-	eend $?
-}
diff --git a/app-admin/rsyslog/files/7-stable/rsyslog.logrotate-r1 b/app-admin/rsyslog/files/7-stable/rsyslog.logrotate-r1
deleted file mode 100644
index 1eae30e..0000000
--- a/app-admin/rsyslog/files/7-stable/rsyslog.logrotate-r1
+++ /dev/null
@@ -1,37 +0,0 @@
-# Uncomment the following directive if you have re-enabled
-# "/var/log/syslog" in "/etc/rsyslog.d/50-default.conf"
-#/var/log/syslog
-#{
-#	rotate 7
-#	daily
-#	missingok
-#	notifempty
-#	delaycompress
-#	compress
-#	postrotate
-#		test -r /run/rsyslogd.pid && kill -HUP $(cat /run/rsyslogd.pid) &>/dev/null
-#	endscript
-#}
-
-/var/log/auth.log
-/var/log/cron.log
-/var/log/daemon.log
-/var/log/kern.log
-/var/log/lpr.log
-/var/log/mail.log
-/var/log/news.log
-/var/log/user.log
-/var/log/debug.log
-/var/log/messages
-{
-	rotate 4
-	weekly
-	missingok
-	notifempty
-	compress
-	delaycompress
-	sharedscripts
-	postrotate
-		test -r /run/rsyslogd.pid && kill -HUP $(cat /run/rsyslogd.pid) &>/dev/null
-	endscript
-}
diff --git a/app-admin/rsyslog/metadata.xml b/app-admin/rsyslog/metadata.xml
deleted file mode 100644
index 6f23de3..0000000
--- a/app-admin/rsyslog/metadata.xml
+++ /dev/null
@@ -1,41 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE pkgmetadata SYSTEM "http://www.gentoo.org/dtd/metadata.dtd">
-<pkgmetadata>
-	<maintainer>
-		<email>ultrabug@gentoo.org</email>
-		<name>Ultrabug</name>
-		<description>Primary Maintainer</description>
-	</maintainer>
-	<maintainer>
-		<email>whissi@whissi.de</email>
-		<name>Thomas D. (Whissi)</name>
-		<description>Proxy-Maintainer, CC. bugs</description>
-	</maintainer>
-	<use>
-		<flag name="dbi">Build the general database output module (requires <pkg>dev-db/libdbi</pkg>)</flag>
-		<flag name="elasticsearch">Build the Elasticsearch output module (requires <pkg>net-misc/curl</pkg>)</flag>
-		<flag name="extras">Add support for the UDP spoofing module (omudpspoof) using <pkg>net-libs/libnet</pkg></flag>
-		<flag name="gcrypt">Add support for encrypted log files using <pkg>dev-libs/libgcrypt</pkg></flag>
-		<flag name="kerberos">Build the GSSAPI input and output module (requires <pkg>virtual/krb5</pkg>)</flag>
-		<flag name="mongodb">Build the MongoDB output module (requires <pkg>dev-libs/libmongo-client</pkg>)</flag>
-		<flag name="mysql">Build the MySQL databse output module (requires <pkg>virtual/mysql</pkg>)</flag>
-		<flag name="normalize">Build the normalize modify module (requires <pkg>dev-libs/libee</pkg> and <pkg>dev-libs/liblognorm</pkg>)</flag>
-		<flag name="omudpspoof">Build the udpspoof output module (requires <pkg>net-libs/libnet</pkg>)</flag>
-		<flag name="oracle">Build the Oracle database output module (requires <pkg>dev-db/oracle-instantclient-basic</pkg>)</flag>
-		<flag name="postgres">Build the PostgreSQL database output module (requires <pkg>dev-db/postgresql-base</pkg>)</flag>
-		<flag name="rabbitmq">Build the RabbitMQ output module (requires <pkg>net-libs/rabbitmq-c</pkg>)</flag>
-		<flag name="redis">Build the Redis output module using (requires <pkg>dev-libs/hiredis</pkg>)</flag>
-		<flag name="relp">Build the Reliable Event Logging Protocol (RELP) output module (requires <pkg>dev-libs/librelp</pkg>)</flag>
-		<flag name="rfc3195">Build the rfc3195 input module (requires <pkg>dev-libs/liblogging</pkg>)</flag>
-		<flag name="rfc5424hmac">Build the rfc5424hmac modify module (requires <pkg>dev-libs/openssl</pkg>)</flag>
-		<flag name="snmp">Build the snmp modify and output module (requires <pkg>net-analyzer/net-snmp</pkg>)</flag>
-		<flag name="ssl">Add support for encrypted client/server communication (requires <pkg>net-libs/gnutls</pkg>)</flag>
-		<flag name="systemd">Build the journal input and output module (requires <pkg>sys-apps/systemd</pkg>)</flag>
-		<flag name="usertools">Installs the user tools (rsgtutil, rscryutil...) corresponding to the set USE flags</flag>
-		<flag name="zeromq">Build the ZeroMQ input and output modules (requires <pkg>net-libs/zeromq</pkg>)</flag>
-	</use>
-	<upstream>
-		<bugs-to>https://github.com/rsyslog/rsyslog/issues</bugs-to>
-		<remote-id type="cpe">cpe:/a:rsyslog:rsyslog</remote-id>
-	</upstream>
-</pkgmetadata>
diff --git a/app-admin/rsyslog/rsyslog-7.6.3.ebuild b/app-admin/rsyslog/rsyslog-7.6.3.ebuild
deleted file mode 100644
index c73667a..0000000
--- a/app-admin/rsyslog/rsyslog-7.6.3.ebuild
+++ /dev/null
@@ -1,327 +0,0 @@
-# Copyright 1999-2014 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: $
-
-EAPI=5
-AUTOTOOLS_AUTORECONF=1
-
-inherit autotools-utils eutils systemd
-
-DESCRIPTION="An enhanced multi-threaded syslogd with database support and more"
-HOMEPAGE="http://www.rsyslog.com/"
-SRC_URI="http://www.rsyslog.com/files/download/${PN}/${P}.tar.gz"
-
-LICENSE="GPL-3 LGPL-3 Apache-2.0"
-KEYWORDS="~amd64 ~x86"
-SLOT="0"
-IUSE="dbi debug doc elasticsearch +gcrypt kerberos mongodb mysql normalize omudpspoof oracle postgres rabbitmq redis relp rfc3195 rfc5424hmac snmp ssl systemd usertools zeromq"
-
-RDEPEND="
-	>=dev-libs/json-c-0.11:=
-	>=dev-libs/libestr-0.1.9
-	>=dev-libs/liblogging-1.0.1:=[stdlog]
-	>=sys-libs/zlib-1.2.5
-	dbi? ( >=dev-db/libdbi-0.8.3 )
-	elasticsearch? ( >=net-misc/curl-7.35.0 )
-	gcrypt? ( >=dev-libs/libgcrypt-1.5.3:= )
-	kerberos? ( virtual/krb5 )
-	mongodb? ( >=dev-libs/libmongo-client-0.1.4 )
-	mysql? ( virtual/mysql )
-	normalize? (
-		>=dev-libs/libee-0.4.0
-		>=dev-libs/liblognorm-0.3.1:=
-		!>=dev-libs/liblognorm-1.0.0
-	)
-	omudpspoof? ( >=net-libs/libnet-1.1.6 )
-	oracle? ( >=dev-db/oracle-instantclient-basic-10.2 )
-	postgres? ( >=dev-db/postgresql-base-8.4.20 )
-	rabbitmq? ( >=net-libs/rabbitmq-c-0.3.0 )
-	redis? ( >=dev-libs/hiredis-0.11.0 )
-	relp? ( >=dev-libs/librelp-1.2.5 )
-	rfc3195? ( >=dev-libs/liblogging-1.0.1:=[rfc3195] )
-	rfc5424hmac? ( >=dev-libs/openssl-0.9.8y )
-	snmp? ( >=net-analyzer/net-snmp-5.7.2 )
-	ssl? ( >=net-libs/gnutls-2.12.23 )
-	systemd? ( >=sys-apps/systemd-208 )
-	zeromq? ( >=net-libs/czmq-1.2.0 )"
-DEPEND="${RDEPEND}
-	virtual/pkgconfig"
-
-BRANCH="7-stable"
-
-# Test suite requires a special setup or will always fail
-RESTRICT="test"
-
-# Maitainer note : open a bug to upstream
-# showing that building in a separate dir fails
-AUTOTOOLS_IN_SOURCE_BUILD=1
-
-AUTOTOOLS_PRUNE_LIBTOOL_FILES="modules"
-
-DOCS=(
-	AUTHORS
-	ChangeLog
-	doc/rsyslog-example.conf
-	"${FILESDIR}"/${BRANCH}/README.gentoo
-)
-
-PATCHES=(
-	"${FILESDIR}"/${BRANCH}/${PN}-7.x-mmjsonparse.patch
-	"${FILESDIR}"/${BRANCH}/fix-omruleset-default-value.patch
-	"${FILESDIR}"/${BRANCH}/bugfix_52.patch
-	"${FILESDIR}"/${BRANCH}/bugfix_73.patch
-)
-
-src_configure() {
-	# Maintainer notes:
-	# * Guardtime support is missing because libgt isn't yet available
-	#   in portage.
-	# * Hadoop's HDFS file system output module is currently not
-	#   supported in Gentoo because nobody is able to test it
-	#   (JAVA dependency).
-	# * dev-libs/hiredis doesn't provide pkg-config (see #504614,
-	#   upstream PR 129 and 136) so we need to export HIREDIS_*
-	#   variables because rsyslog's build system depends on pkg-config.
-
-	if use redis; then
-		export HIREDIS_LIBS="-L${EPREFIX}/usr/$(get_libdir) -lhiredis"
-		export HIREDIS_CFLAGS="-I${EPREFIX}/usr/include"
-	fi
-
-	local myeconfargs=(
-		# Input Plugins without depedencies
-		--enable-imfile
-		--enable-impstats
-		--enable-imptcp
-		--enable-imttcp
-		# Message Modificiation Plugins without depedencies
-		--enable-mmanon
-		--enable-mmaudit
-		--enable-mmcount
-		--enable-mmfields
-		--enable-mmjsonparse
-		--enable-mmpstrucdata
-		--enable-mmsequence
-		--enable-mmutf8fix
-		# Output Modification Plugins without dependencies
-		--enable-mail
-		--enable-omprog
-		--enable-omruleset
-		--enable-omstdout
-		--enable-omuxsock
-		# Misc
-		--enable-pmaixforwardedfrom
-		--enable-pmcisconames
-		--enable-pmlastmsg
-		--enable-pmrfc3164sd
-		--enable-pmsnare
-		--enable-sm_cust_bindcdr
-		# DB
-		$(use_enable dbi libdbi)
-		$(use_enable mongodb ommongodb)
-		$(use_enable mysql)
-		$(use_enable oracle)
-		$(use_enable postgres pgsql)
-		$(use_enable redis omhiredis)
-		# Debug
-		$(use_enable debug)
-		$(use_enable debug diagtools)
-		$(use_enable debug imdiag)
-		$(use_enable debug memcheck)
-		$(use_enable debug rtinst)
-		$(use_enable debug valgrind)
-		# Misc
-		$(use_enable elasticsearch)
-		$(use_enable gcrypt libgcrypt)
-		$(use_enable kerberos gssapi-krb5)
-		$(use_enable normalize mmnormalize)
-		$(use_enable omudpspoof)
-		$(use_enable rabbitmq omrabbitmq)
-		$(use_enable relp)
-		$(use_enable rfc3195)
-		$(use_enable rfc5424hmac mmrfc5424addhmac)
-		$(use_enable snmp)
-		$(use_enable snmp mmsnmptrapd)
-		$(use_enable ssl gnutls)
-		$(use_enable systemd imjournal)
-		$(use_enable systemd omjournal)
-		$(use_enable usertools)
-		$(use_enable zeromq imzmq3)
-		$(use_enable zeromq omzmq3)
-		"$(systemd_with_unitdir)"
-	)
-
-	autotools-utils_src_configure
-}
-
-src_install() {
-	use doc && HTML_DOCS=( "${S}"/doc/ )
-	autotools-utils_src_install
-
-	newconfd "${FILESDIR}/${BRANCH}/${PN}.confd-r1" ${PN}
-	newinitd "${FILESDIR}/${BRANCH}/${PN}.initd-r1" ${PN}
-
-	keepdir /var/empty/dev
-	keepdir /var/spool/${PN}
-	keepdir /etc/ssl/${PN}
-	keepdir /etc/${PN}.d
-
-	insinto /etc
-	newins "${FILESDIR}/${BRANCH}/${PN}.conf" ${PN}.conf
-
-	insinto /etc/rsyslog.d/
-	doins "${FILESDIR}/${BRANCH}/50-default.conf"
-
-	insinto /etc/logrotate.d/
-	newins "${FILESDIR}/${BRANCH}/${PN}.logrotate-r1" ${PN}
-
-	if use mysql; then
-		insinto /usr/share/doc/${PF}/scripts/mysql
-		doins plugins/ommysql/{createDB.sql,contrib/delete_mysql}
-	fi
-
-	if use postgres; then
-		insinto /usr/share/doc/${PF}/scripts/pgsql
-		doins plugins/ompgsql/createDB.sql
-	fi
-}
-
-pkg_postinst() {
-	local advertise_readme=0
-
-	if [[ -z "${REPLACING_VERSIONS}" ]]; then
-		# This is a new installation
-
-		advertise_readme=1
-
-		if use mysql || use postgres; then
-			echo
-			elog "Sample SQL scripts for MySQL & PostgreSQL have been installed to:"
-			elog "  /usr/share/doc/${PF}/scripts"
-		fi
-
-		if use ssl; then
-			echo
-			elog "To create a default CA and certificates for your server and clients, run:"
-			elog "  emerge --config =${PF}"
-			elog "on your logging server. You can run it several times,"
-			elog "once for each logging client. The client certificates will be signed"
-			elog "using the CA certificate generated during the first run."
-		fi
-	fi
-
-	if [[ -z "${REPLACING_VERSIONS}" ]] || [[ ${REPLACING_VERSIONS} < 8.0 ]]; then
-		# Show this message until rsyslog-8.x
-		echo
-		elog "Since ${PN}-7.6.3 we no longer use the catch-all log target"
-		elog "\"/var/log/syslog\" due to its redundancy to the other log targets."
-
-		advertise_readme=1
-	fi
-
-	if [[ ${advertise_readme} -gt 0 ]]; then
-		# We need to show the README file location
-
-		echo ""
-		elog "Please read"
-		elog ""
-		elog "  ${EPREFIX}/usr/share/doc/${PF}/README.gentoo*"
-		elog ""
-		elog "for more details."
-	fi
-}
-
-pkg_config() {
-	if ! use ssl ; then
-		einfo "There is nothing to configure for rsyslog unless you"
-		einfo "used USE=ssl to build it."
-		return 0
-	fi
-
-	# Make sure the certificates directory exists
-	CERTDIR="${EROOT}/etc/ssl/${PN}"
-	if [ ! -d "${CERTDIR}" ]; then
-		mkdir "${CERTDIR}" || die
-	fi
-	einfo "Your certificates will be stored in ${CERTDIR}"
-
-	# Create a default CA if needed
-	if [ ! -f "${CERTDIR}/${PN}_ca.cert.pem" ]; then
-		einfo "No CA key and certificate found in ${CERTDIR}, creating them for you..."
-		certtool --generate-privkey \
-			--outfile "${CERTDIR}/${PN}_ca.privkey.pem" &>/dev/null
-		chmod 400 "${CERTDIR}/${PN}_ca.privkey.pem"
-
-		cat > "${T}/${PF}.$$" <<- _EOF
-		cn = Portage automated CA
-		ca
-		cert_signing_key
-		expiration_days = 3650
-		_EOF
-
-		certtool --generate-self-signed \
-			--load-privkey "${CERTDIR}/${PN}_ca.privkey.pem" \
-			--outfile "${CERTDIR}/${PN}_ca.cert.pem" \
-			--template "${T}/${PF}.$$" &>/dev/null
-		chmod 400 "${CERTDIR}/${PN}_ca.privkey.pem"
-
-		# Create the server certificate
-		echo
-		einfon "Please type the Common Name of the SERVER you wish to create a certificate for: "
-		read -r CN
-
-		einfo "Creating private key and certificate for server ${CN}..."
-		certtool --generate-privkey \
-			--outfile "${CERTDIR}/${PN}_${CN}.key.pem" &>/dev/null
-		chmod 400 "${CERTDIR}/${PN}_${CN}.key.pem"
-
-		cat > "${T}/${PF}.$$" <<- _EOF
-		cn = ${CN}
-		tls_www_server
-		dns_name = ${CN}
-		expiration_days = 3650
-		_EOF
-
-		certtool --generate-certificate \
-			--outfile "${CERTDIR}/${PN}_${CN}.cert.pem" \
-			--load-privkey "${CERTDIR}/${PN}_${CN}.key.pem" \
-			--load-ca-certificate "${CERTDIR}/${PN}_ca.cert.pem" \
-			--load-ca-privkey "${CERTDIR}/${PN}_ca.privkey.pem" \
-			--template "${T}/${PF}.$$" &>/dev/null
-		chmod 400 "${CERTDIR}/${PN}_${CN}.cert.pem"
-
-	else
-		einfo "Found existing ${CERTDIR}/${PN}_ca.cert.pem, skipping CA and SERVER creation."
-	fi
-
-	# Create a client certificate
-	echo
-	einfon "Please type the Common Name of the CLIENT you wish to create a certificate for: "
-	read -r CN
-
-	einfo "Creating private key and certificate for client ${CN}..."
-	certtool --generate-privkey \
-		--outfile "${CERTDIR}/${PN}_${CN}.key.pem" &>/dev/null
-	chmod 400 "${CERTDIR}/${PN}_${CN}.key.pem"
-
-	cat > "${T}/${PF}.$$" <<- _EOF
-	cn = ${CN}
-	tls_www_client
-	dns_name = ${CN}
-	expiration_days = 3650
-	_EOF
-
-	certtool --generate-certificate \
-		--outfile "${CERTDIR}/${PN}_${CN}.cert.pem" \
-		--load-privkey "${CERTDIR}/${PN}_${CN}.key.pem" \
-		--load-ca-certificate "${CERTDIR}/${PN}_ca.cert.pem" \
-		--load-ca-privkey "${CERTDIR}/${PN}_ca.privkey.pem" \
-		--template "${T}/${PF}.$$" &>/dev/null
-	chmod 400 "${CERTDIR}/${PN}_${CN}.cert.pem"
-
-	rm -f "${T}/${PF}.$$"
-
-	echo
-	einfo "Here is the documentation on how to encrypt your log traffic:"
-	einfo " http://www.rsyslog.com/doc/rsyslog_tls.html"
-}