summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat (limited to 'cnf/make.conf.s390')
-rw-r--r--cnf/make.conf.s390284
1 files changed, 284 insertions, 0 deletions
diff --git a/cnf/make.conf.s390 b/cnf/make.conf.s390
new file mode 100644
index 00000000..b2056dd5
--- /dev/null
+++ b/cnf/make.conf.s390
@@ -0,0 +1,284 @@
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: /var/cvsroot/gentoo-src/portage/cnf/make.conf.s390,v 1.3.2.4 2005/04/13 15:28:38 jstubbs Exp $
+# Contains local system settings for Portage system
+
+# Please review 'man make.conf' for more information.
+
+# Build-time functionality
+# ========================
+#
+# The USE variable is used to enable optional build-time functionality. For
+# example, quite a few packages have optional X, gtk or GNOME functionality
+# that can only be enabled or disabled at compile-time. Gentoo Linux has a
+# very extensive set of USE variables described in our USE variable HOWTO at
+# http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=2&chap=1
+#
+# The available list of use flags with descriptions is in your portage tree.
+# Use 'less' to view them: --> less /usr/portage/profiles/use.desc <--
+#
+# 'ufed' is an ncurses/dialog interface available in portage to make handling
+# useflags for you. 'emerge app-portage/ufed'
+#
+# Example:
+#USE="X gtk gnome -alsa"
+
+# Host Setting
+# ============
+#
+# All s390 systems should use this host setting:
+
+CHOST="s390-ibm-linux-gnu"
+
+# Host and optimization settings
+# ==============================
+#
+#CFLAGS="-O2 -pipe"
+
+# If you set a CFLAGS above, then this line will set your default C++ flags to
+# the same settings.
+#CXXFLAGS="${CFLAGS}"
+
+# Advanced Masking
+# ================
+#
+# Gentoo is using a new masking system to allow for easier stability testing
+# on packages. KEYWORDS are used in ebuilds to mask and unmask packages based
+# on the platform they are set for. A special form has been added that
+# indicates packages and revisions that are expected to work, but have not yet
+# been approved for the stable set. '~arch' is a superset of 'arch' which
+# includes the unstable, in testing, packages. Users of the 'x86' architecture
+# would add '~x86' to ACCEPT_KEYWORDS to enable unstable/testing packages.
+# '~ppc', '~sparc' are the unstable KEYWORDS for their respective platforms.
+#
+# Please note that this is not for development, alpha, beta, nor cvs release
+# packages. "Broken" packages will not be added to testing and should not be
+# requested to be added. Alternative routes are available to developers
+# for experimental packages, and it is at their discretion to use them.
+#
+# DO NOT PUT ANYTHING BUT YOUR SPECIFIC ~ARCHITECTURE IN THE LIST.
+# IF YOU ARE UNSURE OF YOUR ARCH, OR THE IMPLICATIONS, DO NOT MODIFY THIS.
+#
+#ACCEPT_KEYWORDS="~arch"
+
+# Portage Directories
+# ===================
+#
+# Each of these settings controls an aspect of portage's storage and file
+# system usage. If you change any of these, be sure it is available when
+# you try to use portage. *** DO NOT INCLUDE A TRAILING "/" ***
+#
+# PORTAGE_TMPDIR is the location portage will use for compilations and
+# temporary storage of data. This can get VERY large depending upon
+# the application being installed.
+#PORTAGE_TMPDIR=/var/tmp
+#
+# PORTDIR is the location of the portage tree. This is the repository
+# for all profile information as well as all ebuilds. If you change
+# this, you must update your /etc/make.profile symlink accordingly.
+#PORTDIR=/usr/portage
+#
+# DISTDIR is where all of the source code tarballs will be placed for
+# emerges. The source code is maintained here unless you delete
+# it. The entire repository of tarballs for gentoo is 9G. This is
+# considerably more than any user will ever download. 2-3G is
+# a large DISTDIR.
+#DISTDIR=${PORTDIR}/distfiles
+#
+# PKGDIR is the location of binary packages that you can have created
+# with '--buildpkg' or '-b' while emerging a package. This can get
+# upto several hundred megs, or even a few gigs.
+#PKGDIR=${PORTDIR}/packages
+#
+# PORT_LOGDIR is the location where portage will store all the logs it
+# creates from each individual merge. They are stored as NNNN-$PF.log
+# in the directory specified. This is disabled until you enable it by
+# providing a directory. Permissions will be modified as needed IF the
+# directory exists, otherwise logging will be disabled. NNNN is the
+# increment at the time the log is created. Logs are thus sequential.
+#PORT_LOGDIR=/var/log/portage
+#
+# PORTDIR_OVERLAY is a directory where local ebuilds may be stored without
+# concern that they will be deleted by rsync updates. Default is not
+# defined.
+#PORTDIR_OVERLAY=/usr/local/portage
+
+# Fetching files
+# ==============
+#
+# If you need to set a proxy for wget or lukemftp, add the appropriate "export
+# ftp_proxy=<proxy>" and "export http_proxy=<proxy>" lines to /etc/profile if
+# all users on your system should use them.
+#
+# Portage uses wget by default. Here are some settings for some alternate
+# downloaders -- note that you need to merge these programs first before they
+# will be available.
+#
+# Default fetch command (5 tries, passive ftp for firewall compatibility)
+#FETCHCOMMAND="/usr/bin/wget -t 5 --passive-ftp \${URI} -P \${DISTDIR}"
+#RESUMECOMMAND="/usr/bin/wget -c -t 5 --passive-ftp \${URI} -P \${DISTDIR}"
+#
+# Using wget, ratelimiting downloads
+#FETCHCOMMAND="/usr/bin/wget -t 5 --passive-ftp --limit-rate=200k \${URI} -P \${DISTDIR}"
+#RESUMECOMMAND="/usr/bin/wget -c -t 5 --passive-ftp --limit-rate=200k \${URI} -P \${DISTDIR}"
+#
+# Lukemftp (BSD ftp):
+#FETCHCOMMAND="/usr/bin/lukemftp -s -a -o \${DISTDIR}/\${FILE} \${URI}"
+#RESUMECOMMAND="/usr/bin/lukemftp -s -a -R -o \${DISTDIR}/\${FILE} \${URI}"
+#
+# Portage uses GENTOO_MIRRORS to specify mirrors to use for source retrieval.
+# The list is a space separated list which is read left to right. If you use
+# another mirror we highly recommend leaving the default mirror at the end of
+# the list so that portage will fall back to it if the files cannot be found
+# on your specified mirror. We _HIGHLY_ recommend that you change this setting
+# to a nearby mirror by merging and using the 'mirrorselect' tool.
+#GENTOO_MIRRORS="<your_mirror_here> http://distfiles.gentoo.org http://www.ibiblio.org/pub/Linux/distributions/gentoo"
+#
+# Portage uses PORTAGE_BINHOST to specify mirrors for prebuilt-binary packages.
+# The list is a single entry specifying the full address of the directory
+# serving the tbz2's for your system. Running emerge with either '--getbinpkg'
+# or '--getbinpkgonly' will cause portage to retrieve the metadata from all
+# packages in the directory specified, and use that data to determine what will
+# be downloaded and merged. '-g' or '-gK' are the recommend parameters. Please
+# consult the man pages and 'emerge --help' for more information. For FTP, the
+# default connection is passive -- If you require an active connection, affix
+# an asterisk (*) to the end of the host:port string before the path.
+#PORTAGE_BINHOST="http://grp.mirror.site/gentoo/grp/1.4/i686/athlon-xp/"
+# This ftp connection is passive ftp.
+#PORTAGE_BINHOST="ftp://login:pass@grp.mirror.site/pub/grp/i686/athlon-xp/"
+# This ftp connection is active ftp.
+#PORTAGE_BINHOST="ftp://login:pass@grp.mirror.site:21*/pub/grp/i686/athlon-xp/"
+
+# Synchronizing Portage
+# =====================
+#
+# Each of these settings affects how Gentoo synchronizes your Portage tree.
+# Synchronization is handled by rsync and these settings allow some control
+# over how it is done.
+#
+#
+# SYNC is the server used by rsync to retrieve a localized rsync mirror
+# rotation. This allows you to select servers that are geographically
+# close to you, yet still distribute the load over a number of servers.
+# Please do not single out specific rsync mirrors. Doing so places undue
+# stress on particular mirrors. Instead you may use one of the following
+# continent specific rotations:
+#
+# Default: "rsync://rsync.gentoo.org/gentoo-portage"
+# North America: "rsync://rsync.namerica.gentoo.org/gentoo-portage"
+# South America: "rsync://rsync.samerica.gentoo.org/gentoo-portage"
+# Europe: "rsync://rsync.europe.gentoo.org/gentoo-portage"
+# Asia: "rsync://rsync.asia.gentoo.org/gentoo-portage"
+# Australia: "rsync://rsync.au.gentoo.org/gentoo-portage"
+#SYNC="rsync://rsync.gentoo.org/gentoo-portage"
+#
+# RSYNC_RETRIES sets the number of times portage will attempt to retrieve
+# a current portage tree before it exits with an error. This allows
+# for a more successful retrieval without user intervention most times.
+#RSYNC_RETRIES="3"
+#
+# RSYNC_TIMEOUT sets the length of time rsync will wait before it times out
+# on a connection. Most users will benefit from this setting as it will
+# reduce the amount of 'dead air' they experience when they run across
+# the occasional, unreachable mirror. Dialup users might want to set this
+# value up around the 300 second mark.
+#RSYNC_TIMEOUT=180
+
+# Advanced Features
+# =================
+#
+# MAKEOPTS provides extra options that may be passed to 'make' when a
+# program is compiled. Presently the only use is for specifying
+# the number of parallel makes (-j) to perform. The suggested number
+# for parallel makes is CPUs+1.
+#MAKEOPTS="-j2"
+#
+# PORTAGE_NICENESS provides a default increment to emerge's niceness level.
+# Note: This is an increment. Running emerge in a niced environment will
+# reduce it further. Default is unset.
+#PORTAGE_NICENESS=3
+#
+# AUTOCLEAN enables portage to automatically clean out older or overlapping
+# packages from the system after every successful merge. This is the
+# same as running 'emerge -c' after every merge. Set with: "yes" or "no".
+# This does not affect the unpacked source. See 'noclean' below.
+#AUTOCLEAN="yes"
+#
+# PORTAGE_TMPFS is a location where portage may create temporary files.
+# If specified, portage will use this directory whenever possible
+# for all rapid operations such as lockfiles and transient data.
+# It is _highly_ recommended that this be a tmpfs or ramdisk. Do not
+# set this to anything that does not give a significant performance
+# enhancement and proper FS compliance for locks and read/write.
+# /dev/shm is a glibc mandated tmpfs, and should be a reasonable
+# setting for all linux kernel+glibc based systems.
+#PORTAGE_TMPFS="/dev/shm"
+#
+# FEATURES are settings that affect the functionality of portage. Most of
+# these settings are for developer use, but some are available to non-
+# developers as well.
+#
+# 'autoaddcvs' causes portage to automatically try to add files to cvs
+# that will have to be added later. Done at generation times
+# and only has an effect when 'cvs' is also set.
+# 'buildpkg' causes binary packages to be created of all packages that
+# are being merged.
+# 'ccache' enables ccache support via CC.
+# 'collision-protect'
+# prevents packages from overwriting files that are owned by
+# another package or by no package at all.
+# 'cvs' causes portage to enable all cvs features (commits, adds),
+# and to apply all USE flags in SRC_URI for digests -- for
+# developers only.
+# 'digest' causes digests to be generated for all packages being merged.
+# 'distcc' enables distcc support via CC.
+# 'distlocks' enables distfiles locking using fcntl or hardlinks. This
+# is enabled by default. Tools exist to help clean the locks
+# after crashes: /usr/lib/portage/bin/clean_locks.
+# 'fixpackages' allows portage to fix binary packages that are stored in
+# PKGDIR. This can consume a lot of time. 'fixpackages' is
+# also a script that can be run at any given time to force
+# the same actions.
+# 'gpg' enables basic verification of Manifest files using gpg.
+# This features is UNDER DEVELOPMENT and reacts to features
+# of strict and severe. Heavy use of gpg sigs is coming.
+# 'keeptemp' prevents the clean phase from deleting the temp files ($T)
+# from a merge.
+# 'keepwork' prevents the clean phase from deleting the WORKDIR.
+# 'maketest' causes ebuilds to perform testing phases if they are capable
+# of it. Some packages support this automaticaly via makefiles.
+# 'noauto' causes ebuild to perform only the action requested and
+# not any other required actions like clean or unpack -- for
+# debugging purposes only.
+# 'noclean' prevents portage from removing the source and temporary files
+# after a merge -- for debugging purposes only.
+# 'nostrip' prevents the stripping of binaries.
+# 'notitles' disables xterm titlebar updates (which contain status info).
+# 'sandbox' enables sandboxing when running emerge and ebuild.
+# 'strict' causes portage to react strongly to conditions that are
+# potentially dangerous, like missing/incorrect Manifest files.
+# 'userpriv' allows portage to drop root privileges while it is compiling,
+# as a security measure. As a side effect this can remove
+# sandbox access violations for users.
+# 'usersandbox' enables sandboxing while portage is running under userpriv.
+#FEATURES="sandbox buildpkg ccache distcc userpriv usersandbox notitles noclean noauto cvs keeptemp keepwork autoaddcvs"
+#FEATURES="sandbox ccache distcc distlocks autoaddcvs"
+#
+# CCACHE_SIZE sets the space use limitations for ccache. The default size is
+# 2G, and will be set if not defined otherwise and ccache is in features.
+# Portage will set the default ccache dir if it is not present in the
+# user's environment, for userpriv it sets: ${PORTAGE_TMPDIR}/ccache
+# (/var/tmp/ccache), and for regular use the default is /root/.ccache.
+# Sizes are specified with 'G' 'M' or 'K'.
+# '2G' for 2 gigabytes, '2048M' for 2048 megabytes (same as 2G).
+#CCACHE_SIZE="512M"
+#
+# DISTCC_DIR sets the temporary space used by distcc.
+#DISTCC_DIR="${PORTAGE_TMPDIR}/.distcc"
+#
+# RSYNC_EXCLUDEFROM is a file that portage will pass to rsync when it updates
+# the portage tree. Specific chunks of the tree may be excluded from
+# consideration. This may cause dependency failures if you are not careful.
+# The file format is one pattern per line, blanks and ';' or '#' lines are
+# comments. See 'man rsync' for more details on the exclude-from format.
+#RSYNC_EXCLUDEFROM=/etc/portage/rsync_excludes