rename BUILDDIR to PORTAGE_BUILDDIR

svn path=/main/trunk/; revision=2475

2 files changed, 52 insertions, 52 deletions

diff --git a/bin/ebuild.sh b/bin/ebuild.sh
index 5ea8f92a..f4f1fe02 100755
--- a/bin/ebuild.sh
+++ b/bin/ebuild.sh
@@ -640,7 +640,7 @@ dyn_unpack() {
 			echo ">>> ${EBUILD} has been updated; recreating WORKDIR..."
 			newstuff="yes"
 			rm -rf "${WORKDIR}"
-		elif [ ! -f "${BUILDDIR}/.unpacked" ]; then
+		elif [ ! -f "${PORTAGE_BUILDDIR}/.unpacked" ]; then
 			echo ">>> Not marked as unpacked; recreating WORKDIR..."
 			newstuff="yes"
 			rm -rf "${WORKDIR}"
@@ -658,9 +658,9 @@ dyn_unpack() {
 	[ -d "$WORKDIR" ] && cd "${WORKDIR}"
 	echo ">>> Unpacking source..."
 	src_unpack
-	touch "${BUILDDIR}/.unpacked" || die "IO Failure -- Failed 'touch .unpacked' in BUILDIR"
+	touch "${PORTAGE_BUILDDIR}/.unpacked" || die "IO Failure -- Failed 'touch .unpacked' in BUILDIR"
 	echo ">>> Source unpacked."
-	cd "$BUILDDIR"
+	cd "${PORTAGE_BUILDDIR}"
 
 	[ "$(type -t post_src_unpack)" == "function" ] && post_src_unpack
 
@@ -670,14 +670,14 @@ dyn_unpack() {
 dyn_clean() {
 	if [ "$USERLAND" == "BSD" ] && type -p chflags &>/dev/null; then
 		chflags -R noschg,nouchg,nosappnd,nouappnd,nosunlnk,nouunlnk \
-			"${BUILDDIR}"
+			"${PORTAGE_BUILDDIR}"
 	fi
 
 	if [ "$USERLAND" == "Darwin" ] && type -p chflags &>/dev/null; then
-		chflags -R noschg,nouchg,nosappnd,nouappnd "${BUILDDIR}"
+		chflags -R noschg,nouchg,nosappnd,nouappnd "${PORTAGE_BUILDDIR}"
 	fi
 
-	rm -rf "${BUILDDIR}/image"
+	rm -rf "${PORTAGE_BUILDDIR}/image"
 
 	if ! hasq keeptemp $FEATURES; then
 		rm -rf "${T}"
@@ -686,25 +686,25 @@ dyn_clean() {
 	fi
 
 	if ! hasq keepwork $FEATURES; then
-		rm -rf "${BUILDDIR}/.unpacked"
-		rm -rf "${BUILDDIR}/.compiled"
-		rm -rf "${BUILDDIR}/.tested"
-		rm -rf "${BUILDDIR}/.installed"
-		rm -rf "${BUILDDIR}/.packaged"
-		rm -rf "${BUILDDIR}/build-info"
+		rm -rf "${PORTAGE_BUILDDIR}/.unpacked"
+		rm -rf "${PORTAGE_BUILDDIR}/.compiled"
+		rm -rf "${PORTAGE_BUILDDIR}/.tested"
+		rm -rf "${PORTAGE_BUILDDIR}/.installed"
+		rm -rf "${PORTAGE_BUILDDIR}/.packaged"
+		rm -rf "${PORTAGE_BUILDDIR}/build-info"
 		rm -rf "${WORKDIR}"
 	fi
 
-	if [ -f "${BUILDDIR}/.unpacked" ]; then
-		find "${BUILDDIR}" -type d ! -regex "^${WORKDIR}" | sort -r | tr "\n" "\0" | $XARGS -0 rmdir &>/dev/null
+	if [ -f "${PORTAGE_BUILDDIR}/.unpacked" ]; then
+		find "${PORTAGE_BUILDDIR}" -type d ! -regex "^${WORKDIR}" | sort -r | tr "\n" "\0" | $XARGS -0 rmdir &>/dev/null
 	fi
 
-	if [ -z "$(find "${BUILDDIR}" -mindepth 1 -maxdepth 1)" ]; then
-		rmdir "${BUILDDIR}"
+	if [ -z "$(find "${PORTAGE_BUILDDIR}" -mindepth 1 -maxdepth 1)" ]; then
+		rmdir "${PORTAGE_BUILDDIR}"
 	fi
 	# do not bind this to doebuild defined DISTDIR; don't trust doebuild, and if mistakes are made it'll
 	# result in it wiping the users distfiles directory (bad).
-	rm -rf "${BUILDDIR}/distdir"
+	rm -rf "${PORTAGE_BUILDDIR}/distdir"
 	true
 }
 
@@ -816,33 +816,33 @@ abort_handler() {
 
 abort_compile() {
 	abort_handler "src_compile" $1
-	rm -f "${BUILDDIR}/.compiled"
+	rm -f "${PORTAGE_BUILDDIR}/.compiled"
 	exit 1
 }
 
 abort_unpack() {
 	abort_handler "src_unpack" $1
-	rm -f "${BUILDDIR}/.unpacked"
-	rm -rf "${BUILDDIR}/work"
+	rm -f "${PORTAGE_BUILDDIR}/.unpacked"
+	rm -rf "${PORTAGE_BUILDDIR}/work"
 	exit 1
 }
 
 abort_package() {
 	abort_handler "dyn_package" $1
-	rm -f "${BUILDDIR}/.packaged"
+	rm -f "${PORTAGE_BUILDDIR}/.packaged"
 	rm -f "${PKGDIR}"/All/${PF}.t*
 	exit 1
 }
 
 abort_test() {
 	abort_handler "dyn_test" $1
-	rm -f "${BUILDDIR}/.tested"
+	rm -f "${PORTAGE_BUILDDIR}/.tested"
 	exit 1
 }
 
 abort_install() {
 	abort_handler "src_install" $1
-	rm -rf "${BUILDDIR}/image"
+	rm -rf "${PORTAGE_BUILDDIR}/image"
 	exit 1
 }
 
@@ -864,7 +864,7 @@ dyn_compile() {
 	[ "${DISTCC_DIR-unset}"  == "unset" ] && export DISTCC_DIR="${PORTAGE_TMPDIR}/.distcc"
 	[ ! -z "${DISTCC_DIR}" ] && addwrite "${DISTCC_DIR}"
 
-	if hasq noauto $FEATURES &>/dev/null && [ ! -f ${BUILDDIR}/.unpacked ]; then
+	if hasq noauto $FEATURES &>/dev/null && [ ! -f ${PORTAGE_BUILDDIR}/.unpacked ]; then
 		echo
 		echo "!!! We apparently haven't unpacked... This is probably not what you"
 		echo "!!! want to be doing... You are using FEATURES=noauto so I'll assume"
@@ -879,14 +879,14 @@ dyn_compile() {
 		sleep 3
 	fi
 
-	local srcdir=${BUILDDIR}
-	cd "${BUILDDIR}"
+	local srcdir=${PORTAGE_BUILDDIR}
+	cd "${PORTAGE_BUILDDIR}"
 	if [ ! -e "build-info" ]; then
 		mkdir build-info
 	fi
 	cp "${EBUILD}" "build-info/${PF}.ebuild"
 
-	if [ ${BUILDDIR}/.compiled -nt "${WORKDIR}" ]; then
+	if [ ${PORTAGE_BUILDDIR}/.compiled -nt "${WORKDIR}" ]; then
 		echo ">>> It appears that ${PN} is already compiled; skipping."
 		echo ">>> (clean to force compilation)"
 		trap SIGINT SIGQUIT
@@ -907,7 +907,7 @@ dyn_compile() {
 	src_compile
 	echo ">>> Source compiled."
 	#|| abort_compile "fail"
-	cd "${BUILDDIR}"
+	cd "${PORTAGE_BUILDDIR}"
 	touch .compiled
 	cd build-info
 
@@ -935,7 +935,7 @@ dyn_compile() {
 
 dyn_package() {
 	trap "abort_package" SIGINT SIGQUIT
-	cd "${BUILDDIR}/image"
+	cd "${PORTAGE_BUILDDIR}/image"
 	tar cpvf - ./ | bzip2 -f > ../bin.tar.bz2 || die "Failed to create tarball"
 	cd ..
 	xpak build-info inf.xpak
@@ -947,15 +947,15 @@ dyn_package() {
 	fi
 	ln -sf "../All/${PF}.tbz2" "${PKGDIR}/${CATEGORY}/${PF}.tbz2" || die "Failed to create symlink in ${PKGDIR}/${CATEGORY}"
 	echo ">>> Done."
-	cd "${BUILDDIR}"
-	touch .packaged || die "Failed to 'touch .packaged' in ${BUILDDIR}"
+	cd "${PORTAGE_BUILDDIR}"
+	touch .packaged || die "Failed to 'touch .packaged' in ${PORTAGE_BUILDDIR}"
 	trap SIGINT SIGQUIT
 }
 
 
 dyn_test() {
 	[ "$(type -t pre_src_test)" == "function" ] && pre_src_test
-	if [ ${BUILDDIR}/.tested -nt "${WORKDIR}" ]; then
+	if [ ${PORTAGE_BUILDDIR}/.tested -nt "${WORKDIR}" ]; then
 		echo ">>> It appears that ${PN} has already been tested; skipping."
 		[ "$(type -t post_src_test)" == "function" ] && post_src_test
 		return
@@ -973,8 +973,8 @@ dyn_test() {
 		src_test
 	fi
 
-	cd "${BUILDDIR}"
-	touch .tested || die "Failed to 'touch .tested' in ${BUILDDIR}"
+	cd "${PORTAGE_BUILDDIR}"
+	touch .tested || die "Failed to 'touch .tested' in ${PORTAGE_BUILDDIR}"
 	[ "$(type -t post_src_test)" == "function" ] && post_src_test
 	trap SIGINT SIGQUIT
 }
@@ -986,8 +986,8 @@ PORTAGE_INST_GID="0"
 dyn_install() {
 	trap "abort_install" SIGINT SIGQUIT
 	[ "$(type -t pre_src_install)" == "function" ] && pre_src_install
-	rm -rf "${BUILDDIR}/image"
-	mkdir "${BUILDDIR}/image"
+	rm -rf "${PORTAGE_BUILDDIR}/image"
+	mkdir "${PORTAGE_BUILDDIR}/image"
 	if [ -d "${S}" ]; then
 		cd "${S}"
 	fi
@@ -1033,7 +1033,7 @@ dyn_install() {
 		# Don't want paths that point to the tree where the package was built
 		# (older, broken libtools would do this).  Also check for null paths
 		# because the loader will search $PWD when it finds null paths.
-		f=$(scanelf -qyRF '%r %p' "${D}" | grep -E "(${BUILDDIR}|: |::|^ )")
+		f=$(scanelf -qyRF '%r %p' "${D}" | grep -E "(${PORTAGE_BUILDDIR}|: |::|^ )")
 		if [[ -n ${f} ]] ; then
 			echo -ne '\a\n'
 			echo "QA Notice: the following files contain insecure RUNPATH's"
@@ -1088,7 +1088,7 @@ dyn_install() {
 		fi
 
 		# Save NEEDED information
-		scanelf -qyRF '%p %n' "${D}" | sed -e 's:^:/:' > "${BUILDDIR}"/build-info/NEEDED
+		scanelf -qyRF '%p %n' "${D}" | sed -e 's:^:/:' > "${PORTAGE_BUILDDIR}"/build-info/NEEDED
 
 		if [[ ${qa_sucks_for_sure} -eq 1 ]] ; then
 			die "Aborting due to serious QA concerns"
@@ -1189,10 +1189,10 @@ dyn_install() {
 		done
 	fi
 
-	touch "${BUILDDIR}/.installed"
+	touch "${PORTAGE_BUILDDIR}/.installed"
 	echo ">>> Completed installing ${PF} into ${D}"
 	echo
-	cd ${BUILDDIR}
+	cd ${PORTAGE_BUILDDIR}
 	[ "$(type -t post_src_install)" == "function" ] && post_src_install
 	trap SIGINT SIGQUIT
 }
diff --git a/pym/portage.py b/pym/portage.py
index 0711a947..c78a676d 100644
--- a/pym/portage.py
+++ b/pym/portage.py
@@ -2526,7 +2526,7 @@ def doebuild(myebuild,mydo,myroot,mysettings,debug=0,listonly=0,fetchonly=0,clea
 	mysettings["BUILD_PREFIX"] = mysettings["PORTAGE_TMPDIR"]+"/portage"
 	mysettings["HOME"]         = mysettings["BUILD_PREFIX"]+"/homedir"
 	mysettings["PKG_TMPDIR"]   = mysettings["PORTAGE_TMPDIR"]+"/portage-pkg"
-	mysettings["BUILDDIR"]     = mysettings["BUILD_PREFIX"]+"/"+mysettings["PF"]
+	mysettings["PORTAGE_BUILDDIR"]     = mysettings["BUILD_PREFIX"]+"/"+mysettings["PF"]
 
 	mysettings["PORTAGE_BASHRC"] = EBUILD_SH_ENV_FILE
 
@@ -2571,7 +2571,7 @@ def doebuild(myebuild,mydo,myroot,mysettings,debug=0,listonly=0,fetchonly=0,clea
 
 		# Should be ok again to set $T, as sandbox does not depend on it
 		# XXX Bug.  no way in hell this is valid for clean handling.
-		mysettings["T"]=mysettings["BUILDDIR"]+"/temp"
+		mysettings["T"]=mysettings["PORTAGE_BUILDDIR"]+"/temp"
 		if cleanup or mydo=="clean":
 			if os.path.exists(mysettings["T"]):
 				shutil.rmtree(mysettings["T"])
@@ -2612,10 +2612,10 @@ def doebuild(myebuild,mydo,myroot,mysettings,debug=0,listonly=0,fetchonly=0,clea
 				os.makedirs(mysettings["BUILD_PREFIX"])
 			if (os.getuid() == 0):
 				os.chown(mysettings["BUILD_PREFIX"],portage_uid,portage_gid)
-			if not os.path.exists(mysettings["BUILDDIR"]):
-				os.makedirs(mysettings["BUILDDIR"])
+			if not os.path.exists(mysettings["PORTAGE_BUILDDIR"]):
+				os.makedirs(mysettings["PORTAGE_BUILDDIR"])
 			if (os.getuid() == 0):
-				os.chown(mysettings["BUILDDIR"],portage_uid,portage_gid)
+				os.chown(mysettings["PORTAGE_BUILDDIR"],portage_uid,portage_gid)
 		except OSError, e:
 			print "!!! File system problem. (ReadOnly? Out of space?)"
 			print "!!! Perhaps: rm -Rf",mysettings["BUILD_PREFIX"]
@@ -2630,7 +2630,7 @@ def doebuild(myebuild,mydo,myroot,mysettings,debug=0,listonly=0,fetchonly=0,clea
 				os.chmod(mysettings["HOME"],02770)
 		except OSError, e:
 			print "!!! File system problem. (ReadOnly? Out of space?)"
-			print "!!! Failed to create fake home directory in BUILDDIR"
+			print "!!! Failed to create fake home directory in PORTAGE_BUILDDIR"
 			print "!!!",str(e)
 			return 1
 
@@ -2695,8 +2695,8 @@ def doebuild(myebuild,mydo,myroot,mysettings,debug=0,listonly=0,fetchonly=0,clea
 				features.remove("distcc")
 				mysettings["DISTCC_DIR"]=""
 
-		mysettings["WORKDIR"]=mysettings["BUILDDIR"]+"/work"
-		mysettings["D"]=mysettings["BUILDDIR"]+"/image/"
+		mysettings["WORKDIR"]=mysettings["PORTAGE_BUILDDIR"]+"/work"
+		mysettings["D"]=mysettings["PORTAGE_BUILDDIR"]+"/image/"
 
 		if mysettings.has_key("PORT_LOGDIR"):
 			if not os.access(mysettings["PORT_LOGDIR"],os.F_OK):
@@ -2797,7 +2797,7 @@ def doebuild(myebuild,mydo,myroot,mysettings,debug=0,listonly=0,fetchonly=0,clea
 	if (mydo not in ("setup", "clean", "postinst", "preinst", "prerm") and "noauto" not in features) or \
 		mydo == "unpack":
 		orig_distdir = mysettings["DISTDIR"]
-		edpath = mysettings["DISTDIR"] = os.path.join(mysettings["BUILDDIR"], "distdir")
+		edpath = mysettings["DISTDIR"] = os.path.join(mysettings["PORTAGE_BUILDDIR"], "distdir")
 		if os.path.exists(edpath):
 			try:
 				if os.path.isdir(edpath) and not os.path.islink(edpath):
@@ -2873,16 +2873,16 @@ def doebuild(myebuild,mydo,myroot,mysettings,debug=0,listonly=0,fetchonly=0,clea
 		return spawnebuild(mydo,actionmap,mysettings,debug,logfile=logfile)
 	elif mydo=="qmerge":
 		#check to ensure install was run.  this *only* pops up when users forget it and are using ebuild
-		if not os.path.exists(mysettings["BUILDDIR"]+"/.installed"):
+		if not os.path.exists(mysettings["PORTAGE_BUILDDIR"]+"/.installed"):
 			print "!!! mydo=qmerge, but install phase hasn't been ran"
 			sys.exit(1)
 		#qmerge is specifically not supposed to do a runtime dep check
-		return merge(mysettings["CATEGORY"],mysettings["PF"],mysettings["D"],mysettings["BUILDDIR"]+"/build-info",myroot,mysettings,myebuild=mysettings["EBUILD"],mytree=tree)
+		return merge(mysettings["CATEGORY"],mysettings["PF"],mysettings["D"],mysettings["PORTAGE_BUILDDIR"]+"/build-info",myroot,mysettings,myebuild=mysettings["EBUILD"],mytree=tree)
 	elif mydo=="merge":
 		retval=spawnebuild("install",actionmap,mysettings,debug,alwaysdep=1,logfile=logfile)
 		if retval:
 			return retval
-		return merge(mysettings["CATEGORY"],mysettings["PF"],mysettings["D"],mysettings["BUILDDIR"]+"/build-info",myroot,mysettings,myebuild=mysettings["EBUILD"],mytree=tree)
+		return merge(mysettings["CATEGORY"],mysettings["PF"],mysettings["D"],mysettings["PORTAGE_BUILDDIR"]+"/build-info",myroot,mysettings,myebuild=mysettings["EBUILD"],mytree=tree)
 	else:
 		print "!!! Unknown mydo:",mydo
 		sys.exit(1)