adress -> address spelling typo.

Sidenote, really should remove the 101 files and centralize this damn thing..

svn path=/main/trunk/; revision=2531

13 files changed, 39 insertions, 39 deletions

diff --git a/cnf/make.conf b/cnf/make.conf
index bae8e2cc..c330db9b 100644
--- a/cnf/make.conf
+++ b/cnf/make.conf
@@ -345,13 +345,13 @@ PORTAGE_ELOG_CLASSES="warn error log"
 #PORTAGE_ELOG_COMMAND="/path/to/logprocessor -p '${PACKAGE}' -f '${LOGFILE}'"
 
 # PORTAGE_ELOG_MAILURI: this variable holds all important settings for the mail
-#                       module. In most cases listing the recipient adress and
+#                       module. In most cases listing the recipient address and
 #                       the receiving mailserver should be sufficient, but you can
 #                       also use advanced settings like authentication or TLS. The
 #                       full syntax is:
-#                           adress [[user:passwd@]mailserver[:port]]
+#                           address [[user:passwd@]mailserver[:port]]
 #                       where
-#                           adress:     recipient adress
+#                           address:     recipient address
 #                           user:       username for smtp auth (defaults to none)
 #                           passwd:     password for smtp auth (defaults to none)
 #                           mailserver: smtp server that should be used to deliver the mail (defaults to localhost)
diff --git a/cnf/make.conf.alpha b/cnf/make.conf.alpha
index 6b226eef..d57a77d0 100644
--- a/cnf/make.conf.alpha
+++ b/cnf/make.conf.alpha
@@ -329,13 +329,13 @@ PORTAGE_ELOG_CLASSES="warn error log"
 #PORTAGE_ELOG_COMMAND="/path/to/logprocessor -p '${PACKAGE}' -f '${LOGFILE}'"
 
 # PORTAGE_ELOG_MAILURI: this variable holds all important settings for the mail
-#                       module. In most cases listing the recipient adress and
+#                       module. In most cases listing the recipient address and
 #                       the receiving mailserver should be sufficient, but you can
 #                       also use advanced settings like authentication or TLS. The
 #                       full syntax is:
-#                           adress [[user:passwd@]mailserver[:port]]
+#                           address [[user:passwd@]mailserver[:port]]
 #                       where
-#                           adress:     recipient adress
+#                           address:     recipient adress
 #                           user:       username for smtp auth (defaults to none)
 #                           passwd:     password for smtp auth (defaults to none)
 #                           mailserver: smtp server that should be used to deliver the mail (defaults to localhost)
diff --git a/cnf/make.conf.amd64 b/cnf/make.conf.amd64
index 30dcf341..d0776488 100644
--- a/cnf/make.conf.amd64
+++ b/cnf/make.conf.amd64
@@ -340,13 +340,13 @@ PORTAGE_ELOG_CLASSES="warn error log"
 #PORTAGE_ELOG_COMMAND="/path/to/logprocessor -p '${PACKAGE}' -f '${LOGFILE}'"
 
 # PORTAGE_ELOG_MAILURI: this variable holds all important settings for the mail
-#                       module. In most cases listing the recipient adress and
+#                       module. In most cases listing the recipient address and
 #                       the receiving mailserver should be sufficient, but you can
 #                       also use advanced settings like authentication or TLS. The
 #                       full syntax is:
-#                           adress [[user:passwd@]mailserver[:port]]
+#                           address [[user:passwd@]mailserver[:port]]
 #                       where
-#                           adress:     recipient adress
+#                           address:     recipient adress
 #                           user:       username for smtp auth (defaults to none)
 #                           passwd:     password for smtp auth (defaults to none)
 #                           mailserver: smtp server that should be used to deliver the mail (defaults to localhost)
diff --git a/cnf/make.conf.arm b/cnf/make.conf.arm
index 649e2207..4bc45ecf 100644
--- a/cnf/make.conf.arm
+++ b/cnf/make.conf.arm
@@ -337,13 +337,13 @@ PORTAGE_ELOG_CLASSES="warn error log"
 #PORTAGE_ELOG_COMMAND="/path/to/logprocessor -p '${PACKAGE}' -f '${LOGFILE}'"
 
 # PORTAGE_ELOG_MAILURI: this variable holds all important settings for the mail
-#                       module. In most cases listing the recipient adress and
+#                       module. In most cases listing the recipient address and
 #                       the receiving mailserver should be sufficient, but you can
 #                       also use advanced settings like authentication or TLS. The
 #                       full syntax is:
-#                           adress [[user:passwd@]mailserver[:port]]
+#                           address [[user:passwd@]mailserver[:port]]
 #                       where
-#                           adress:     recipient adress
+#                           address:     recipient adress
 #                           user:       username for smtp auth (defaults to none)
 #                           passwd:     password for smtp auth (defaults to none)
 #                           mailserver: smtp server that should be used to deliver the mail (defaults to localhost)
diff --git a/cnf/make.conf.hppa b/cnf/make.conf.hppa
index 87e79887..26174274 100644
--- a/cnf/make.conf.hppa
+++ b/cnf/make.conf.hppa
@@ -346,13 +346,13 @@ PORTAGE_ELOG_CLASSES="warn error log"
 #PORTAGE_ELOG_COMMAND="/path/to/logprocessor -p '${PACKAGE}' -f '${LOGFILE}'"
 
 # PORTAGE_ELOG_MAILURI: this variable holds all important settings for the mail
-#                       module. In most cases listing the recipient adress and
+#                       module. In most cases listing the recipient address and
 #                       the receiving mailserver should be sufficient, but you can
 #                       also use advanced settings like authentication or TLS. The
 #                       full syntax is:
-#                           adress [[user:passwd@]mailserver[:port]]
+#                           address [[user:passwd@]mailserver[:port]]
 #                       where
-#                           adress:     recipient adress
+#                           address:     recipient adress
 #                           user:       username for smtp auth (defaults to none)
 #                           passwd:     password for smtp auth (defaults to none)
 #                           mailserver: smtp server that should be used to deliver the mail (defaults to localhost)
diff --git a/cnf/make.conf.ia64 b/cnf/make.conf.ia64
index ede5a447..91c8639d 100644
--- a/cnf/make.conf.ia64
+++ b/cnf/make.conf.ia64
@@ -308,13 +308,13 @@ PORTAGE_ELOG_CLASSES="warn error log"
 #PORTAGE_ELOG_COMMAND="/path/to/logprocessor -p '${PACKAGE}' -f '${LOGFILE}'"
 
 # PORTAGE_ELOG_MAILURI: this variable holds all important settings for the mail
-#                       module. In most cases listing the recipient adress and
+#                       module. In most cases listing the recipient address and
 #                       the receiving mailserver should be sufficient, but you can
 #                       also use advanced settings like authentication or TLS. The
 #                       full syntax is:
-#                           adress [[user:passwd@]mailserver[:port]]
+#                           address [[user:passwd@]mailserver[:port]]
 #                       where
-#                           adress:     recipient adress
+#                           address:     recipient adress
 #                           user:       username for smtp auth (defaults to none)
 #                           passwd:     password for smtp auth (defaults to none)
 #                           mailserver: smtp server that should be used to deliver the mail (defaults to localhost)
diff --git a/cnf/make.conf.mips b/cnf/make.conf.mips
index cf2ab82b..b2287e2a 100644
--- a/cnf/make.conf.mips
+++ b/cnf/make.conf.mips
@@ -326,13 +326,13 @@ PORTAGE_ELOG_CLASSES="warn error log"
 #PORTAGE_ELOG_COMMAND="/path/to/logprocessor -p '${PACKAGE}' -f '${LOGFILE}'"
 
 # PORTAGE_ELOG_MAILURI: this variable holds all important settings for the mail
-#                       module. In most cases listing the recipient adress and
+#                       module. In most cases listing the recipient address and
 #                       the receiving mailserver should be sufficient, but you can
 #                       also use advanced settings like authentication or TLS. The
 #                       full syntax is:
-#                           adress [[user:passwd@]mailserver[:port]]
+#                           address [[user:passwd@]mailserver[:port]]
 #                       where
-#                           adress:     recipient adress
+#                           address:     recipient adress
 #                           user:       username for smtp auth (defaults to none)
 #                           passwd:     password for smtp auth (defaults to none)
 #                           mailserver: smtp server that should be used to deliver the mail (defaults to localhost)
diff --git a/cnf/make.conf.ppc b/cnf/make.conf.ppc
index 17c12e62..b331fc50 100644
--- a/cnf/make.conf.ppc
+++ b/cnf/make.conf.ppc
@@ -366,13 +366,13 @@ PORTAGE_ELOG_CLASSES="warn error log"
 #PORTAGE_ELOG_COMMAND="/path/to/logprocessor -p '${PACKAGE}' -f '${LOGFILE}'"
 
 # PORTAGE_ELOG_MAILURI: this variable holds all important settings for the mail
-#                       module. In most cases listing the recipient adress and
+#                       module. In most cases listing the recipient address and
 #                       the receiving mailserver should be sufficient, but you can
 #                       also use advanced settings like authentication or TLS. The
 #                       full syntax is:
-#                           adress [[user:passwd@]mailserver[:port]]
+#                           address [[user:passwd@]mailserver[:port]]
 #                       where
-#                           adress:     recipient adress
+#                           address:     recipient adress
 #                           user:       username for smtp auth (defaults to none)
 #                           passwd:     password for smtp auth (defaults to none)
 #                           mailserver: smtp server that should be used to deliver the mail (defaults to localhost)
diff --git a/cnf/make.conf.ppc64 b/cnf/make.conf.ppc64
index f4eb7120..7845678e 100644
--- a/cnf/make.conf.ppc64
+++ b/cnf/make.conf.ppc64
@@ -344,13 +344,13 @@ PORTAGE_ELOG_CLASSES="warn error log"
 #PORTAGE_ELOG_COMMAND="/path/to/logprocessor -p '${PACKAGE}' -f '${LOGFILE}'"
 
 # PORTAGE_ELOG_MAILURI: this variable holds all important settings for the mail
-#                       module. In most cases listing the recipient adress and
+#                       module. In most cases listing the recipient address and
 #                       the receiving mailserver should be sufficient, but you can
 #                       also use advanced settings like authentication or TLS. The
 #                       full syntax is:
-#                           adress [[user:passwd@]mailserver[:port]]
+#                           address [[user:passwd@]mailserver[:port]]
 #                       where
-#                           adress:     recipient adress
+#                           address:     recipient adress
 #                           user:       username for smtp auth (defaults to none)
 #                           passwd:     password for smtp auth (defaults to none)
 #                           mailserver: smtp server that should be used to deliver the mail (defaults to localhost)
diff --git a/cnf/make.conf.s390 b/cnf/make.conf.s390
index 2dd66361..8eb532b8 100644
--- a/cnf/make.conf.s390
+++ b/cnf/make.conf.s390
@@ -308,13 +308,13 @@ PORTAGE_ELOG_CLASSES="warn error log"
 #PORTAGE_ELOG_COMMAND="/path/to/logprocessor -p '${PACKAGE}' -f '${LOGFILE}'"
 
 # PORTAGE_ELOG_MAILURI: this variable holds all important settings for the mail
-#                       module. In most cases listing the recipient adress and
+#                       module. In most cases listing the recipient address and
 #                       the receiving mailserver should be sufficient, but you can
 #                       also use advanced settings like authentication or TLS. The
 #                       full syntax is:
-#                           adress [[user:passwd@]mailserver[:port]]
+#                           address [[user:passwd@]mailserver[:port]]
 #                       where
-#                           adress:     recipient adress
+#                           address:     recipient adress
 #                           user:       username for smtp auth (defaults to none)
 #                           passwd:     password for smtp auth (defaults to none)
 #                           mailserver: smtp server that should be used to deliver the mail (defaults to localhost)
diff --git a/cnf/make.conf.sparc b/cnf/make.conf.sparc
index 6cf9b0db..b760218d 100644
--- a/cnf/make.conf.sparc
+++ b/cnf/make.conf.sparc
@@ -344,13 +344,13 @@ PORTAGE_ELOG_CLASSES="warn error log"
 #PORTAGE_ELOG_COMMAND="/path/to/logprocessor -p '${PACKAGE}' -f '${LOGFILE}'"
 
 # PORTAGE_ELOG_MAILURI: this variable holds all important settings for the mail
-#                       module. In most cases listing the recipient adress and
+#                       module. In most cases listing the recipient address and
 #                       the receiving mailserver should be sufficient, but you can
 #                       also use advanced settings like authentication or TLS. The
 #                       full syntax is:
-#                           adress [[user:passwd@]mailserver[:port]]
+#                           address [[user:passwd@]mailserver[:port]]
 #                       where
-#                           adress:     recipient adress
+#                           address:     recipient adress
 #                           user:       username for smtp auth (defaults to none)
 #                           passwd:     password for smtp auth (defaults to none)
 #                           mailserver: smtp server that should be used to deliver the mail (defaults to localhost)
diff --git a/cnf/make.conf.x86 b/cnf/make.conf.x86
index f3adf66a..01e94515 100644
--- a/cnf/make.conf.x86
+++ b/cnf/make.conf.x86
@@ -343,13 +343,13 @@ PORTAGE_ELOG_CLASSES="warn error log"
 #PORTAGE_ELOG_COMMAND="/path/to/logprocessor -p '${PACKAGE}' -f '${LOGFILE}'"
 
 # PORTAGE_ELOG_MAILURI: this variable holds all important settings for the mail
-#                       module. In most cases listing the recipient adress and
+#                       module. In most cases listing the recipient address and
 #                       the receiving mailserver should be sufficient, but you can
 #                       also use advanced settings like authentication or TLS. The
 #                       full syntax is:
-#                           adress [[user:passwd@]mailserver[:port]]
+#                           address [[user:passwd@]mailserver[:port]]
 #                       where
-#                           adress:     recipient adress
+#                           address:     recipient adress
 #                           user:       username for smtp auth (defaults to none)
 #                           passwd:     password for smtp auth (defaults to none)
 #                           mailserver: smtp server that should be used to deliver the mail (defaults to localhost)
diff --git a/cnf/make.conf.x86-fbsd b/cnf/make.conf.x86-fbsd
index f0f8f9aa..f77bac29 100644
--- a/cnf/make.conf.x86-fbsd
+++ b/cnf/make.conf.x86-fbsd
@@ -334,13 +334,13 @@ PORTAGE_ELOG_CLASSES="warn error log"
 #PORTAGE_ELOG_COMMAND="/path/to/logprocessor -p '${PACKAGE}' -f '${LOGFILE}'"
 
 # PORTAGE_ELOG_MAILURI: this variable holds all important settings for the mail
-#                       module. In most cases listing the recipient adress and
+#                       module. In most cases listing the recipient address and
 #                       the receiving mailserver should be sufficient, but you can
 #                       also use advanced settings like authentication or TLS. The
 #                       full syntax is:
-#                           adress [[user:passwd@]mailserver[:port]]
+#                           address [[user:passwd@]mailserver[:port]]
 #                       where
-#                           adress:     recipient adress
+#                           address:     recipient adress
 #                           user:       username for smtp auth (defaults to none)
 #                           passwd:     password for smtp auth (defaults to none)
 #                           mailserver: smtp server that should be used to deliver the mail (defaults to localhost)