Rearrange PCI host emulation code.

Add ARM PCI emulation.


git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@1916 c046a42c-6fe2-441c-8c8c-71466251a162

1 files changed, 156 insertions, 0 deletions

diff --git a/hw/grackle_pci.c b/hw/grackle_pci.c
new file mode 100644
index 000000000..e3cbceb49
--- /dev/null
+++ b/hw/grackle_pci.c
@@ -0,0 +1,156 @@
+/*
+ * QEMU Grackle (heathrow PPC) PCI host
+ *
+ * Copyright (c) 2006 Fabrice Bellard
+ * 
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "vl.h"
+typedef target_phys_addr_t pci_addr_t;
+#include "pci_host.h"
+
+typedef PCIHostState GrackleState;
+
+static void pci_grackle_config_writel (void *opaque, target_phys_addr_t addr,
+                                       uint32_t val)
+{
+    GrackleState *s = opaque;
+#ifdef TARGET_WORDS_BIGENDIAN
+    val = bswap32(val);
+#endif
+    s->config_reg = val;
+}
+
+static uint32_t pci_grackle_config_readl (void *opaque, target_phys_addr_t addr)
+{
+    GrackleState *s = opaque;
+    uint32_t val;
+
+    val = s->config_reg;
+#ifdef TARGET_WORDS_BIGENDIAN
+    val = bswap32(val);
+#endif
+    return val;
+}
+
+static CPUWriteMemoryFunc *pci_grackle_config_write[] = {
+    &pci_grackle_config_writel,
+    &pci_grackle_config_writel,
+    &pci_grackle_config_writel,
+};
+
+static CPUReadMemoryFunc *pci_grackle_config_read[] = {
+    &pci_grackle_config_readl,
+    &pci_grackle_config_readl,
+    &pci_grackle_config_readl,
+};
+
+static CPUWriteMemoryFunc *pci_grackle_write[] = {
+    &pci_host_data_writeb,
+    &pci_host_data_writew,
+    &pci_host_data_writel,
+};
+
+static CPUReadMemoryFunc *pci_grackle_read[] = {
+    &pci_host_data_readb,
+    &pci_host_data_readw,
+    &pci_host_data_readl,
+};
+
+/* XXX: we do not simulate the hardware - we rely on the BIOS to
+   set correctly for irq line field */
+static void pci_grackle_set_irq(PCIDevice *d, void *pic, int irq_num, int level)
+{
+    heathrow_pic_set_irq(pic, d->config[PCI_INTERRUPT_LINE], level);
+}
+
+PCIBus *pci_grackle_init(uint32_t base, void *pic)
+{
+    GrackleState *s;
+    PCIDevice *d;
+    int pci_mem_config, pci_mem_data;
+
+    s = qemu_mallocz(sizeof(GrackleState));
+    s->bus = pci_register_bus(pci_grackle_set_irq, pic, 0);
+
+    pci_mem_config = cpu_register_io_memory(0, pci_grackle_config_read, 
+                                            pci_grackle_config_write, s);
+    pci_mem_data = cpu_register_io_memory(0, pci_grackle_read,
+                                          pci_grackle_write, s);
+    cpu_register_physical_memory(base, 0x1000, pci_mem_config);
+    cpu_register_physical_memory(base + 0x00200000, 0x1000, pci_mem_data);
+    d = pci_register_device(s->bus, "Grackle host bridge", sizeof(PCIDevice), 
+                            0, NULL, NULL);
+    d->config[0x00] = 0x57; // vendor_id
+    d->config[0x01] = 0x10;
+    d->config[0x02] = 0x02; // device_id
+    d->config[0x03] = 0x00;
+    d->config[0x08] = 0x00; // revision
+    d->config[0x09] = 0x01;
+    d->config[0x0a] = 0x00; // class_sub = host
+    d->config[0x0b] = 0x06; // class_base = PCI_bridge
+    d->config[0x0e] = 0x00; // header_type
+
+    d->config[0x18] = 0x00;  // primary_bus
+    d->config[0x19] = 0x01;  // secondary_bus
+    d->config[0x1a] = 0x00;  // subordinate_bus
+    d->config[0x1c] = 0x00;
+    d->config[0x1d] = 0x00;
+    
+    d->config[0x20] = 0x00; // memory_base
+    d->config[0x21] = 0x00;
+    d->config[0x22] = 0x01; // memory_limit
+    d->config[0x23] = 0x00;
+    
+    d->config[0x24] = 0x00; // prefetchable_memory_base
+    d->config[0x25] = 0x00;
+    d->config[0x26] = 0x00; // prefetchable_memory_limit
+    d->config[0x27] = 0x00;
+
+#if 0
+    /* PCI2PCI bridge same values as PearPC - check this */
+    d->config[0x00] = 0x11; // vendor_id
+    d->config[0x01] = 0x10;
+    d->config[0x02] = 0x26; // device_id
+    d->config[0x03] = 0x00;
+    d->config[0x08] = 0x02; // revision
+    d->config[0x0a] = 0x04; // class_sub = pci2pci
+    d->config[0x0b] = 0x06; // class_base = PCI_bridge
+    d->config[0x0e] = 0x01; // header_type
+
+    d->config[0x18] = 0x0;  // primary_bus
+    d->config[0x19] = 0x1;  // secondary_bus
+    d->config[0x1a] = 0x1;  // subordinate_bus
+    d->config[0x1c] = 0x10; // io_base
+    d->config[0x1d] = 0x20; // io_limit
+    
+    d->config[0x20] = 0x80; // memory_base
+    d->config[0x21] = 0x80;
+    d->config[0x22] = 0x90; // memory_limit
+    d->config[0x23] = 0x80;
+    
+    d->config[0x24] = 0x00; // prefetchable_memory_base
+    d->config[0x25] = 0x84;
+    d->config[0x26] = 0x00; // prefetchable_memory_limit
+    d->config[0x27] = 0x85;
+#endif
+    return s->bus;
+}
+