diff options
Diffstat (limited to 'hw/rtl8139.c')
| -rw-r--r-- | hw/rtl8139.c | 52 |
1 files changed, 26 insertions, 26 deletions
diff --git a/hw/rtl8139.c b/hw/rtl8139.c index 210af449f..097ad473e 100644 --- a/hw/rtl8139.c +++ b/hw/rtl8139.c @@ -1,8 +1,8 @@ /** * QEMU RTL8139 emulation - * + * * Copyright (c) 2006 Igor Kovalenko - * + * * Permission is hereby granted, free of charge, to any person obtaining a copy * of this software and associated documentation files (the "Software"), to deal * in the Software without restriction, including without limitation the rights @@ -20,13 +20,13 @@ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. - + * Modifications: * 2006-Jan-28 Mark Malakanov : TSAD and CSCR implementation (for Windows driver) - * + * * 2006-Apr-28 Juergen Lock : EEPROM emulation changes for FreeBSD driver * HW revision ID changes for FreeBSD driver - * + * * 2006-Jul-01 Igor Kovalenko : Implemented loopback mode for FreeBSD driver * Corrected packet transfer reassembly routine for 8139C+ mode * Rearranged debugging print statements @@ -305,11 +305,11 @@ enum CSCRBits { CSCR_LinkDownCmd = 0x0f3c0, */ enum CSCRBits { - CSCR_Testfun = 1<<15, /* 1 = Auto-neg speeds up internal timer, WO, def 0 */ + CSCR_Testfun = 1<<15, /* 1 = Auto-neg speeds up internal timer, WO, def 0 */ CSCR_LD = 1<<9, /* Active low TPI link disable signal. When low, TPI still transmits link pulses and TPI stays in good link state. def 1*/ CSCR_HEART_BIT = 1<<8, /* 1 = HEART BEAT enable, 0 = HEART BEAT disable. HEART BEAT function is only valid in 10Mbps mode. def 1*/ CSCR_JBEN = 1<<7, /* 1 = enable jabber function. 0 = disable jabber function, def 1*/ - CSCR_F_LINK_100 = 1<<6, /* Used to login force good link in 100Mbps for diagnostic purposes. 1 = DISABLE, 0 = ENABLE. def 1*/ + CSCR_F_LINK_100 = 1<<6, /* Used to login force good link in 100Mbps for diagnostic purposes. 1 = DISABLE, 0 = ENABLE. def 1*/ CSCR_F_Connect = 1<<5, /* Assertion of this bit forces the disconnect function to be bypassed. def 0*/ CSCR_Con_status = 1<<3, /* This bit indicates the status of the connection. 1 = valid connected link detected; 0 = disconnected link detected. RO def 0*/ CSCR_Con_status_En = 1<<2, /* Assertion of this bit configures LED1 pin to indicate connection status. def 0*/ @@ -813,7 +813,7 @@ static void rtl8139_do_receive(void *opaque, const uint8_t *buf, int size, int d uint32_t packet_header = 0; uint8_t buf1[60]; - static const uint8_t broadcast_macaddr[6] = + static const uint8_t broadcast_macaddr[6] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; DEBUG_PRINT((">>> RTL8139: received len=%d\n", size)); @@ -890,10 +890,10 @@ static void rtl8139_do_receive(void *opaque, const uint8_t *buf, int size, int d ++s->tally_counters.RxOkMul; } else if (s->phys[0] == buf[0] && - s->phys[1] == buf[1] && - s->phys[2] == buf[2] && - s->phys[3] == buf[3] && - s->phys[4] == buf[4] && + s->phys[1] == buf[1] && + s->phys[2] == buf[2] && + s->phys[3] == buf[3] && + s->phys[4] == buf[4] && s->phys[5] == buf[5]) { /* match */ if (!(s->RxConfig & AcceptMyPhys)) @@ -1225,7 +1225,7 @@ static void rtl8139_reset(RTL8139State *s) s->Config3 = 0x1; /* fast back-to-back compatible */ s->Config5 = 0x0; - s->CSCR = CSCR_F_LINK_100 | CSCR_HEART_BIT | CSCR_LD; + s->CSCR = CSCR_F_LINK_100 | CSCR_HEART_BIT | CSCR_LD; s->CpCmd = 0x0; /* reset C+ mode */ @@ -2420,17 +2420,17 @@ static uint16_t rtl8139_TSAD_read(RTL8139State *s) |((s->TxStatus[2] & TxUnderrun)?TSAD_TUN2:0) |((s->TxStatus[1] & TxUnderrun)?TSAD_TUN1:0) |((s->TxStatus[0] & TxUnderrun)?TSAD_TUN0:0) - + |((s->TxStatus[3] & TxAborted )?TSAD_TABT3:0) |((s->TxStatus[2] & TxAborted )?TSAD_TABT2:0) |((s->TxStatus[1] & TxAborted )?TSAD_TABT1:0) |((s->TxStatus[0] & TxAborted )?TSAD_TABT0:0) - + |((s->TxStatus[3] & TxHostOwns )?TSAD_OWN3:0) |((s->TxStatus[2] & TxHostOwns )?TSAD_OWN2:0) |((s->TxStatus[1] & TxHostOwns )?TSAD_OWN1:0) |((s->TxStatus[0] & TxHostOwns )?TSAD_OWN0:0) ; - + DEBUG_PRINT(("RTL8139: TSAD read val=0x%04x\n", ret)); @@ -3315,7 +3315,7 @@ typedef struct PCIRTL8139State { RTL8139State rtl8139; } PCIRTL8139State; -static void rtl8139_mmio_map(PCIDevice *pci_dev, int region_num, +static void rtl8139_mmio_map(PCIDevice *pci_dev, int region_num, uint32_t addr, uint32_t size, int type) { PCIRTL8139State *d = (PCIRTL8139State *)pci_dev; @@ -3324,7 +3324,7 @@ static void rtl8139_mmio_map(PCIDevice *pci_dev, int region_num, cpu_register_physical_memory(addr + 0, 0x100, s->rtl8139_mmio_io_addr); } -static void rtl8139_ioport_map(PCIDevice *pci_dev, int region_num, +static void rtl8139_ioport_map(PCIDevice *pci_dev, int region_num, uint32_t addr, uint32_t size, int type) { PCIRTL8139State *d = (PCIRTL8139State *)pci_dev; @@ -3354,7 +3354,7 @@ static CPUWriteMemoryFunc *rtl8139_mmio_write[3] = { static inline int64_t rtl8139_get_next_tctr_time(RTL8139State *s, int64_t current_time) { - int64_t next_time = current_time + + int64_t next_time = current_time + muldiv64(1, ticks_per_sec, PCI_FREQUENCY); if (next_time <= current_time) next_time = current_time + 1; @@ -3400,7 +3400,7 @@ static void rtl8139_timer(void *opaque) rtl8139_update_irq(s); } - qemu_mod_timer(s->timer, + qemu_mod_timer(s->timer, rtl8139_get_next_tctr_time(s,curr_time)); } #endif /* RTL8139_ONBOARD_TIMER */ @@ -3410,10 +3410,10 @@ void pci_rtl8139_init(PCIBus *bus, NICInfo *nd, int devfn) PCIRTL8139State *d; RTL8139State *s; uint8_t *pci_conf; - + d = (PCIRTL8139State *)pci_register_device(bus, "RTL8139", sizeof(PCIRTL8139State), - devfn, + devfn, NULL, NULL); pci_conf = d->dev.config; pci_conf[0x00] = 0xec; /* Realtek 8139 */ @@ -3434,10 +3434,10 @@ void pci_rtl8139_init(PCIBus *bus, NICInfo *nd, int devfn) s->rtl8139_mmio_io_addr = cpu_register_io_memory(0, rtl8139_mmio_read, rtl8139_mmio_write, s); - pci_register_io_region(&d->dev, 0, 0x100, + pci_register_io_region(&d->dev, 0, 0x100, PCI_ADDRESS_SPACE_IO, rtl8139_ioport_map); - pci_register_io_region(&d->dev, 1, 0x100, + pci_register_io_region(&d->dev, 1, 0x100, PCI_ADDRESS_SPACE_MEM, rtl8139_mmio_map); s->pci_dev = (PCIDevice *)d; @@ -3458,14 +3458,14 @@ void pci_rtl8139_init(PCIBus *bus, NICInfo *nd, int devfn) s->cplus_txbuffer = NULL; s->cplus_txbuffer_len = 0; s->cplus_txbuffer_offset = 0; - + /* XXX: instance number ? */ register_savevm("rtl8139", 0, 3, rtl8139_save, rtl8139_load, s); #if RTL8139_ONBOARD_TIMER s->timer = qemu_new_timer(vm_clock, rtl8139_timer, s); - qemu_mod_timer(s->timer, + qemu_mod_timer(s->timer, rtl8139_get_next_tctr_time(s,qemu_get_clock(vm_clock))); #endif /* RTL8139_ONBOARD_TIMER */ } |