/* * qemu/kvm integration * * Copyright (C) 2006-2008 Qumranet Technologies * * Licensed under the terms of the GNU GPL version 2 or higher. */ #ifndef THE_ORIGINAL_AND_TRUE_QEMU_KVM_H #define THE_ORIGINAL_AND_TRUE_QEMU_KVM_H #ifndef QEMU_KVM_NO_CPU #include "cpu.h" #endif #include #include #ifdef CONFIG_KVM #if defined(__s390__) #include #endif #include #ifndef __user #define __user /* temporary, until installed via make headers_install */ #endif #include #include /* FIXME: share this number with kvm */ /* FIXME: or dynamically alloc/realloc regions */ #ifdef __s390__ #define KVM_MAX_NUM_MEM_REGIONS 1u #define MAX_VCPUS 64 #define LIBKVM_S390_ORIGIN (0UL) #elif defined(__ia64__) #define KVM_MAX_NUM_MEM_REGIONS 32u #define MAX_VCPUS 256 #else #define KVM_MAX_NUM_MEM_REGIONS 32u #define MAX_VCPUS 16 #endif /* kvm abi verison variable */ extern int kvm_abi; /** * \brief The KVM context * * The verbose KVM context */ struct kvm_context { void *opaque; /// is dirty pages logging enabled for all regions or not int dirty_pages_log_all; /// do not create in-kernel irqchip if set int no_irqchip_creation; /// in-kernel irqchip status int irqchip_in_kernel; /// ioctl to use to inject interrupts int irqchip_inject_ioctl; /// do not create in-kernel pit if set int no_pit_creation; /// in-kernel pit status int pit_in_kernel; #ifdef KVM_CAP_IRQ_ROUTING struct kvm_irq_routing *irq_routes; int nr_allocated_irq_routes; #endif void *used_gsi_bitmap; int max_gsi; }; typedef struct kvm_context *kvm_context_t; #include "kvm.h" int kvm_alloc_kernel_memory(kvm_context_t kvm, unsigned long memory, void **vm_mem); int kvm_alloc_userspace_memory(kvm_context_t kvm, unsigned long memory, void **vm_mem); int kvm_arch_create(kvm_context_t kvm, unsigned long phys_mem_bytes, void **vm_mem); int kvm_arch_run(CPUState *env); void kvm_show_code(CPUState *env); int handle_halt(CPUState *env); #ifndef QEMU_KVM_NO_CPU int handle_shutdown(kvm_context_t kvm, CPUState *env); void post_kvm_run(kvm_context_t kvm, CPUState *env); int pre_kvm_run(kvm_context_t kvm, CPUState *env); int handle_io_window(kvm_context_t kvm); int try_push_interrupts(kvm_context_t kvm); #if defined(__x86_64__) || defined(__i386__) struct kvm_msr_list *kvm_get_msr_list(kvm_context_t); int kvm_get_msrs(CPUState *env, struct kvm_msr_entry *msrs, int n); int kvm_set_msrs(CPUState *env, struct kvm_msr_entry *msrs, int n); int kvm_get_mce_cap_supported(kvm_context_t, uint64_t *mce_cap, int *max_banks); int kvm_setup_mce(CPUState *env, uint64_t *mcg_cap); struct kvm_x86_mce; int kvm_set_mce(CPUState *env, struct kvm_x86_mce *mce); #endif #endif /*! * \brief Create new KVM context * * This creates a new kvm_context. A KVM context is a small area of data that * holds information about the KVM instance that gets created by this call.\n * This should always be your first call to KVM. * * \param opaque Not used * \return NULL on failure */ int kvm_init(int smp_cpus); /*! * \brief Disable the in-kernel IRQCHIP creation * * In-kernel irqchip is enabled by default. If userspace irqchip is to be used, * this should be called prior to kvm_create(). * * \param kvm Pointer to the kvm_context */ void kvm_disable_irqchip_creation(kvm_context_t kvm); /*! * \brief Disable the in-kernel PIT creation * * In-kernel pit is enabled by default. If userspace pit is to be used, * this should be called prior to kvm_create(). * * \param kvm Pointer to the kvm_context */ void kvm_disable_pit_creation(kvm_context_t kvm); /*! * \brief Create new virtual machine * * This creates a new virtual machine, maps physical RAM to it, and creates a * virtual CPU for it.\n * \n * Memory gets mapped for addresses 0->0xA0000, 0xC0000->phys_mem_bytes * * \param kvm Pointer to the current kvm_context * \param phys_mem_bytes The amount of physical ram you want the VM to have * \param phys_mem This pointer will be set to point to the memory that * kvm_create allocates for physical RAM * \return 0 on success */ int kvm_create(kvm_context_t kvm, unsigned long phys_mem_bytes, void **phys_mem); int kvm_create_vm(kvm_context_t kvm); void kvm_create_irqchip(kvm_context_t kvm); /*! * \brief Start the VCPU * * This starts the VCPU and virtualization is started.\n * \n * This function will not return until any of these conditions are met: * - An IO/MMIO handler does not return "0" * - An exception that neither the guest OS, nor KVM can handle occurs * * \note This function will call the callbacks registered in kvm_init() * to emulate those functions * \note If you at any point want to interrupt the VCPU, kvm_run() will * listen to the EINTR signal. This allows you to simulate external interrupts * and asyncronous IO. * * \param kvm Pointer to the current kvm_context * \param vcpu Which virtual CPU should be started * \return 0 on success, but you really shouldn't expect this function to * return except for when an error has occured, or when you have sent it * an EINTR signal. */ int kvm_run(CPUState *env); /*! * \brief Check if a vcpu is ready for interrupt injection * * This checks if vcpu interrupts are not masked by mov ss or sti. * * \param kvm Pointer to the current kvm_context * \param vcpu Which virtual CPU should get dumped * \return boolean indicating interrupt injection readiness */ int kvm_is_ready_for_interrupt_injection(CPUState *env); /*! * \brief Read VCPU registers * * This gets the GP registers from the VCPU and outputs them * into a kvm_regs structure * * \note This function returns a \b copy of the VCPUs registers.\n * If you wish to modify the VCPUs GP registers, you should call kvm_set_regs() * * \param kvm Pointer to the current kvm_context * \param vcpu Which virtual CPU should get dumped * \param regs Pointer to a kvm_regs which will be populated with the VCPUs * registers values * \return 0 on success */ int kvm_get_regs(CPUState *env, struct kvm_regs *regs); /*! * \brief Write VCPU registers * * This sets the GP registers on the VCPU from a kvm_regs structure * * \note When this function returns, the regs pointer and the data it points to * can be discarded * \param kvm Pointer to the current kvm_context * \param vcpu Which virtual CPU should get dumped * \param regs Pointer to a kvm_regs which will be populated with the VCPUs * registers values * \return 0 on success */ int kvm_set_regs(CPUState *env, struct kvm_regs *regs); /*! * \brief Read VCPU fpu registers * * This gets the FPU registers from the VCPU and outputs them * into a kvm_fpu structure * * \note This function returns a \b copy of the VCPUs registers.\n * If you wish to modify the VCPU FPU registers, you should call kvm_set_fpu() * * \param kvm Pointer to the current kvm_context * \param vcpu Which virtual CPU should get dumped * \param fpu Pointer to a kvm_fpu which will be populated with the VCPUs * fpu registers values * \return 0 on success */ int kvm_get_fpu(CPUState *env, struct kvm_fpu *fpu); /*! * \brief Write VCPU fpu registers * * This sets the FPU registers on the VCPU from a kvm_fpu structure * * \note When this function returns, the fpu pointer and the data it points to * can be discarded * \param kvm Pointer to the current kvm_context * \param vcpu Which virtual CPU should get dumped * \param fpu Pointer to a kvm_fpu which holds the new vcpu fpu state * \return 0 on success */ int kvm_set_fpu(CPUState *env, struct kvm_fpu *fpu); /*! * \brief Read VCPU system registers * * This gets the non-GP registers from the VCPU and outputs them * into a kvm_sregs structure * * \note This function returns a \b copy of the VCPUs registers.\n * If you wish to modify the VCPUs non-GP registers, you should call * kvm_set_sregs() * * \param kvm Pointer to the current kvm_context * \param vcpu Which virtual CPU should get dumped * \param regs Pointer to a kvm_sregs which will be populated with the VCPUs * registers values * \return 0 on success */ int kvm_get_sregs(CPUState *env, struct kvm_sregs *regs); /*! * \brief Write VCPU system registers * * This sets the non-GP registers on the VCPU from a kvm_sregs structure * * \note When this function returns, the regs pointer and the data it points to * can be discarded * \param kvm Pointer to the current kvm_context * \param vcpu Which virtual CPU should get dumped * \param regs Pointer to a kvm_sregs which will be populated with the VCPUs * registers values * \return 0 on success */ int kvm_set_sregs(CPUState *env, struct kvm_sregs *regs); #ifdef KVM_CAP_MP_STATE /*! * * \brief Read VCPU MP state * */ int kvm_get_mpstate(CPUState *env, struct kvm_mp_state *mp_state); /*! * * \brief Write VCPU MP state * */ int kvm_set_mpstate(CPUState *env, struct kvm_mp_state *mp_state); /*! * * \brief Reset VCPU MP state * */ static inline int kvm_reset_mpstate(CPUState *env) { struct kvm_mp_state mp_state = {.mp_state = KVM_MP_STATE_UNINITIALIZED }; return kvm_set_mpstate(env, &mp_state); } #endif /*! * \brief Simulate an external vectored interrupt * * This allows you to simulate an external vectored interrupt. * * \param kvm Pointer to the current kvm_context * \param vcpu Which virtual CPU should get dumped * \param irq Vector number * \return 0 on success */ int kvm_inject_irq(CPUState *env, unsigned irq); #ifdef KVM_CAP_SET_GUEST_DEBUG int kvm_set_guest_debug(CPUState *env, struct kvm_guest_debug *dbg); #endif #if defined(__i386__) || defined(__x86_64__) /*! * \brief Setup a vcpu's cpuid instruction emulation * * Set up a table of cpuid function to cpuid outputs.\n * * \param kvm Pointer to the current kvm_context * \param vcpu Which virtual CPU should be initialized * \param nent number of entries to be installed * \param entries cpuid function entries table * \return 0 on success, or -errno on error */ int kvm_setup_cpuid(CPUState *env, int nent, struct kvm_cpuid_entry *entries); /*! * \brief Setup a vcpu's cpuid instruction emulation * * Set up a table of cpuid function to cpuid outputs. * This call replaces the older kvm_setup_cpuid interface by adding a few * parameters to support cpuid functions that have sub-leaf values. * * \param kvm Pointer to the current kvm_context * \param vcpu Which virtual CPU should be initialized * \param nent number of entries to be installed * \param entries cpuid function entries table * \return 0 on success, or -errno on error */ int kvm_setup_cpuid2(CPUState *env, int nent, struct kvm_cpuid_entry2 *entries); /*! * \brief Setting the number of shadow pages to be allocated to the vm * * \param kvm pointer to kvm_context * \param nrshadow_pages number of pages to be allocated */ int kvm_set_shadow_pages(kvm_context_t kvm, unsigned int nrshadow_pages); /*! * \brief Getting the number of shadow pages that are allocated to the vm * * \param kvm pointer to kvm_context * \param nrshadow_pages number of pages to be allocated */ int kvm_get_shadow_pages(kvm_context_t kvm, unsigned int *nrshadow_pages); #endif /*! * \brief Set a vcpu's signal mask for guest mode * * A vcpu can have different signals blocked in guest mode and user mode. * This allows guest execution to be interrupted on a signal, without requiring * that the signal be delivered to a signal handler (the signal can be * dequeued using sigwait(2). * * \param kvm Pointer to the current kvm_context * \param vcpu Which virtual CPU should be initialized * \param sigset signal mask for guest mode * \return 0 on success, or -errno on error */ int kvm_set_signal_mask(CPUState *env, const sigset_t *sigset); /*! * \brief Dump VCPU registers * * This dumps some of the information that KVM has about a virtual CPU, namely: * - GP Registers * * A much more verbose version of this is available as kvm_dump_vcpu() * * \param kvm Pointer to the current kvm_context * \param vcpu Which virtual CPU should get dumped * \return 0 on success */ void kvm_show_regs(CPUState *env); void *kvm_create_phys_mem(kvm_context_t, unsigned long phys_start, unsigned long len, int log, int writable); void kvm_destroy_phys_mem(kvm_context_t, unsigned long phys_start, unsigned long len); void kvm_unregister_memory_area(kvm_context_t, uint64_t phys_start, unsigned long len); int kvm_is_containing_region(kvm_context_t kvm, unsigned long phys_start, unsigned long size); int kvm_register_phys_mem(kvm_context_t kvm, unsigned long phys_start, void *userspace_addr, unsigned long len, int log); int kvm_get_dirty_pages(kvm_context_t, unsigned long phys_addr, void *buf); int kvm_get_dirty_pages_range(kvm_context_t kvm, unsigned long phys_addr, unsigned long end_addr, void *opaque, int (*cb)(unsigned long start, unsigned long len, void *bitmap, void *opaque)); int kvm_register_coalesced_mmio(kvm_context_t kvm, uint64_t addr, uint32_t size); int kvm_unregister_coalesced_mmio(kvm_context_t kvm, uint64_t addr, uint32_t size); /*! * \brief Create a memory alias * * Aliases a portion of physical memory to another portion. If the guest * accesses the alias region, it will behave exactly as if it accessed * the target memory. */ int kvm_create_memory_alias(kvm_context_t, uint64_t phys_start, uint64_t len, uint64_t target_phys); /*! * \brief Destroy a memory alias * * Removes an alias created with kvm_create_memory_alias(). */ int kvm_destroy_memory_alias(kvm_context_t, uint64_t phys_start); /*! * \brief Get a bitmap of guest ram pages which are allocated to the guest. * * \param kvm Pointer to the current kvm_context * \param phys_addr Memory slot phys addr * \param bitmap Long aligned address of a big enough bitmap (one bit per page) */ int kvm_get_mem_map(kvm_context_t kvm, unsigned long phys_addr, void *bitmap); int kvm_get_mem_map_range(kvm_context_t kvm, unsigned long phys_addr, unsigned long len, void *buf, void *opaque, int (*cb)(unsigned long start, unsigned long len, void *bitmap, void *opaque)); int kvm_set_irq_level(kvm_context_t kvm, int irq, int level, int *status); int kvm_dirty_pages_log_enable_slot(kvm_context_t kvm, uint64_t phys_start, uint64_t len); int kvm_dirty_pages_log_disable_slot(kvm_context_t kvm, uint64_t phys_start, uint64_t len); /*! * \brief Enable dirty-pages-logging for all memory regions * * \param kvm Pointer to the current kvm_context */ int kvm_dirty_pages_log_enable_all(kvm_context_t kvm); /*! * \brief Disable dirty-page-logging for some memory regions * * Disable dirty-pages-logging for those memory regions that were * created with dirty-page-logging disabled. * * \param kvm Pointer to the current kvm_context */ int kvm_dirty_pages_log_reset(kvm_context_t kvm); #ifdef KVM_CAP_IRQCHIP /*! * \brief Dump in kernel IRQCHIP contents * * Dump one of the in kernel irq chip devices, including PIC (master/slave) * and IOAPIC into a kvm_irqchip structure * * \param kvm Pointer to the current kvm_context * \param chip The irq chip device to be dumped */ int kvm_get_irqchip(kvm_context_t kvm, struct kvm_irqchip *chip); /*! * \brief Set in kernel IRQCHIP contents * * Write one of the in kernel irq chip devices, including PIC (master/slave) * and IOAPIC * * * \param kvm Pointer to the current kvm_context * \param chip THe irq chip device to be written */ int kvm_set_irqchip(kvm_context_t kvm, struct kvm_irqchip *chip); #if defined(__i386__) || defined(__x86_64__) /*! * \brief Get in kernel local APIC for vcpu * * Save the local apic state including the timer of a virtual CPU * * \param kvm Pointer to the current kvm_context * \param vcpu Which virtual CPU should be accessed * \param s Local apic state of the specific virtual CPU */ int kvm_get_lapic(CPUState *env, struct kvm_lapic_state *s); /*! * \brief Set in kernel local APIC for vcpu * * Restore the local apic state including the timer of a virtual CPU * * \param kvm Pointer to the current kvm_context * \param vcpu Which virtual CPU should be accessed * \param s Local apic state of the specific virtual CPU */ int kvm_set_lapic(CPUState *env, struct kvm_lapic_state *s); #endif /*! * \brief Simulate an NMI * * This allows you to simulate a non-maskable interrupt. * * \param kvm Pointer to the current kvm_context * \param vcpu Which virtual CPU should get dumped * \return 0 on success */ int kvm_inject_nmi(CPUState *env); #endif /*! * \brief Simulate an x86 MCE * * This allows you to simulate a x86 MCE. * * \param cenv Which virtual CPU should get MCE injected * \param bank Bank number * \param status MSR_MCI_STATUS * \param mcg_status MSR_MCG_STATUS * \param addr MSR_MCI_ADDR * \param misc MSR_MCI_MISC * \param abort_on_error abort on error */ void kvm_inject_x86_mce(CPUState *cenv, int bank, uint64_t status, uint64_t mcg_status, uint64_t addr, uint64_t misc, int abort_on_error); /*! * \brief Query wheather in kernel pit is used * * \param kvm Pointer to the current kvm_context */ int kvm_pit_in_kernel(kvm_context_t kvm); /*! * \brief Initialize coalesced MMIO * * Check for coalesced MMIO capability and store in context * * \param kvm Pointer to the current kvm_context */ int kvm_init_coalesced_mmio(kvm_context_t kvm); #ifdef KVM_CAP_PIT #if defined(__i386__) || defined(__x86_64__) /*! * \brief Get in kernel PIT of the virtual domain * * Save the PIT state. * * \param kvm Pointer to the current kvm_context * \param s PIT state of the virtual domain */ int kvm_get_pit(kvm_context_t kvm, struct kvm_pit_state *s); /*! * \brief Set in kernel PIT of the virtual domain * * Restore the PIT state. * Timer would be retriggerred after restored. * * \param kvm Pointer to the current kvm_context * \param s PIT state of the virtual domain */ int kvm_set_pit(kvm_context_t kvm, struct kvm_pit_state *s); int kvm_reinject_control(kvm_context_t kvm, int pit_reinject); #ifdef KVM_CAP_PIT_STATE2 /*! * \brief Check for kvm support of kvm_pit_state2 * * \param kvm Pointer to the current kvm_context * \return 0 on success */ int kvm_has_pit_state2(kvm_context_t kvm); /*! * \brief Set in kernel PIT state2 of the virtual domain * * * \param kvm Pointer to the current kvm_context * \param ps2 PIT state2 of the virtual domain * \return 0 on success */ int kvm_set_pit2(kvm_context_t kvm, struct kvm_pit_state2 *ps2); /*! * \brief Get in kernel PIT state2 of the virtual domain * * * \param kvm Pointer to the current kvm_context * \param ps2 PIT state2 of the virtual domain * \return 0 on success */ int kvm_get_pit2(kvm_context_t kvm, struct kvm_pit_state2 *ps2); #endif #endif #endif #ifdef KVM_CAP_VAPIC /*! * \brief Enable kernel tpr access reporting * * When tpr access reporting is enabled, the kernel will call the * ->tpr_access() callback every time the guest vcpu accesses the tpr. * * \param kvm Pointer to the current kvm_context * \param vcpu vcpu to enable tpr access reporting on */ int kvm_enable_tpr_access_reporting(CPUState *env); /*! * \brief Disable kernel tpr access reporting * * Undoes the effect of kvm_enable_tpr_access_reporting(). * * \param kvm Pointer to the current kvm_context * \param vcpu vcpu to disable tpr access reporting on */ int kvm_disable_tpr_access_reporting(CPUState *env); int kvm_enable_vapic(CPUState *env, uint64_t vapic); #endif #if defined(__s390__) int kvm_s390_initial_reset(kvm_context_t kvm, int slot); int kvm_s390_interrupt(kvm_context_t kvm, int slot, struct kvm_s390_interrupt *kvmint); int kvm_s390_set_initial_psw(kvm_context_t kvm, int slot, psw_t psw); int kvm_s390_store_status(kvm_context_t kvm, int slot, unsigned long addr); #endif #ifdef KVM_CAP_DEVICE_ASSIGNMENT /*! * \brief Notifies host kernel about a PCI device to be assigned to a guest * * Used for PCI device assignment, this function notifies the host * kernel about the assigning of the physical PCI device to a guest. * * \param kvm Pointer to the current kvm_context * \param assigned_dev Parameters, like bus, devfn number, etc */ int kvm_assign_pci_device(kvm_context_t kvm, struct kvm_assigned_pci_dev *assigned_dev); /*! * \brief Assign IRQ for an assigned device * * Used for PCI device assignment, this function assigns IRQ numbers for * an physical device and guest IRQ handling. * * \param kvm Pointer to the current kvm_context * \param assigned_irq Parameters, like dev id, host irq, guest irq, etc */ int kvm_assign_irq(kvm_context_t kvm, struct kvm_assigned_irq *assigned_irq); #ifdef KVM_CAP_ASSIGN_DEV_IRQ /*! * \brief Deassign IRQ for an assigned device * * Used for PCI device assignment, this function deassigns IRQ numbers * for an assigned device. * * \param kvm Pointer to the current kvm_context * \param assigned_irq Parameters, like dev id, host irq, guest irq, etc */ int kvm_deassign_irq(kvm_context_t kvm, struct kvm_assigned_irq *assigned_irq); #endif #endif /*! * \brief Determines whether destroying memory regions is allowed * * KVM before 2.6.29 had a bug when destroying memory regions. * * \param kvm Pointer to the current kvm_context */ int kvm_destroy_memory_region_works(kvm_context_t kvm); #ifdef KVM_CAP_DEVICE_DEASSIGNMENT /*! * \brief Notifies host kernel about a PCI device to be deassigned from a guest * * Used for hot remove PCI device, this function notifies the host * kernel about the deassigning of the physical PCI device from a guest. * * \param kvm Pointer to the current kvm_context * \param assigned_dev Parameters, like bus, devfn number, etc */ int kvm_deassign_pci_device(kvm_context_t kvm, struct kvm_assigned_pci_dev *assigned_dev); #endif /*! * \brief Checks whether the generic irq routing capability is present * * Checks whether kvm can reroute interrupts among the various interrupt * controllers. * * \param kvm Pointer to the current kvm_context */ int kvm_has_gsi_routing(kvm_context_t kvm); /*! * \brief Determines the number of gsis that can be routed * * Returns the number of distinct gsis that can be routed by kvm. This is * also the number of distinct routes (if a gsi has two routes, than another * gsi cannot be used...) * * \param kvm Pointer to the current kvm_context */ int kvm_get_gsi_count(kvm_context_t kvm); /*! * \brief Clears the temporary irq routing table * * Clears the temporary irq routing table. Nothing is committed to the * running VM. * * \param kvm Pointer to the current kvm_context */ int kvm_clear_gsi_routes(kvm_context_t kvm); /*! * \brief Adds an irq route to the temporary irq routing table * * Adds an irq route to the temporary irq routing table. Nothing is * committed to the running VM. * * \param kvm Pointer to the current kvm_context */ int kvm_add_irq_route(kvm_context_t kvm, int gsi, int irqchip, int pin); /*! * \brief Removes an irq route from the temporary irq routing table * * Adds an irq route to the temporary irq routing table. Nothing is * committed to the running VM. * * \param kvm Pointer to the current kvm_context */ int kvm_del_irq_route(kvm_context_t kvm, int gsi, int irqchip, int pin); struct kvm_irq_routing_entry; /*! * \brief Adds a routing entry to the temporary irq routing table * * Adds a filled routing entry to the temporary irq routing table. Nothing is * committed to the running VM. * * \param kvm Pointer to the current kvm_context */ int kvm_add_routing_entry(kvm_context_t kvm, struct kvm_irq_routing_entry *entry); /*! * \brief Removes a routing from the temporary irq routing table * * Remove a routing to the temporary irq routing table. Nothing is * committed to the running VM. * * \param kvm Pointer to the current kvm_context */ int kvm_del_routing_entry(kvm_context_t kvm, struct kvm_irq_routing_entry *entry); /*! * \brief Updates a routing in the temporary irq routing table * * Update a routing in the temporary irq routing table * with a new value. entry type and GSI can not be changed. * Nothing is committed to the running VM. * * \param kvm Pointer to the current kvm_context */ int kvm_update_routing_entry(kvm_context_t kvm, struct kvm_irq_routing_entry *entry, struct kvm_irq_routing_entry *newentry); /*! * \brief Commit the temporary irq routing table * * Commit the temporary irq routing table to the running VM. * * \param kvm Pointer to the current kvm_context */ int kvm_commit_irq_routes(kvm_context_t kvm); /*! * \brief Get unused GSI number for irq routing table * * Get unused GSI number for irq routing table * * \param kvm Pointer to the current kvm_context */ int kvm_get_irq_route_gsi(kvm_context_t kvm); /*! * \brief Create a file descriptor for injecting interrupts * * Creates an eventfd based file-descriptor that maps to a specific GSI * in the guest. eventfd compliant signaling (write() from userspace, or * eventfd_signal() from kernelspace) will cause the GSI to inject * itself into the guest at the next available window. * * \param kvm Pointer to the current kvm_context * \param gsi GSI to assign to this fd * \param flags reserved, must be zero */ int kvm_irqfd(kvm_context_t kvm, int gsi, int flags); #ifdef KVM_CAP_DEVICE_MSIX int kvm_assign_set_msix_nr(kvm_context_t kvm, struct kvm_assigned_msix_nr *msix_nr); int kvm_assign_set_msix_entry(kvm_context_t kvm, struct kvm_assigned_msix_entry *entry); #endif uint32_t kvm_get_supported_cpuid(kvm_context_t kvm, uint32_t function, int reg); #else /* !CONFIG_KVM */ typedef struct kvm_context *kvm_context_t; typedef struct kvm_vcpu_context *kvm_vcpu_context_t; struct kvm_pit_state { }; static inline int kvm_init(int smp_cpus) { return 0; } #ifndef QEMU_KVM_NO_CPU static inline void kvm_inject_x86_mce(CPUState *cenv, int bank, uint64_t status, uint64_t mcg_status, uint64_t addr, uint64_t misc, int abort_on_error) { if (abort_on_error) abort(); } #endif extern int kvm_allowed; #endif /* !CONFIG_KVM */ int kvm_main_loop(void); int kvm_init_ap(void); #ifndef QEMU_KVM_NO_CPU int kvm_vcpu_inited(CPUState *env); void kvm_load_registers(CPUState *env); void kvm_save_registers(CPUState *env); void kvm_load_mpstate(CPUState *env); void kvm_save_mpstate(CPUState *env); int kvm_cpu_exec(CPUState *env); int kvm_insert_breakpoint(CPUState * current_env, target_ulong addr, target_ulong len, int type); int kvm_remove_breakpoint(CPUState * current_env, target_ulong addr, target_ulong len, int type); void kvm_remove_all_breakpoints(CPUState * current_env); int kvm_update_guest_debug(CPUState *env, unsigned long reinject_trap); void kvm_apic_init(CPUState *env); /* called from vcpu initialization */ void qemu_kvm_load_lapic(CPUState *env); #endif void kvm_hpet_enable_kpit(void); void kvm_hpet_disable_kpit(void); int kvm_set_irq(int irq, int level, int *status); int kvm_physical_memory_set_dirty_tracking(int enable); int kvm_update_dirty_pages_log(void); #ifndef QEMU_KVM_NO_CPU void qemu_kvm_call_with_env(void (*func)(void *), void *data, CPUState *env); void qemu_kvm_cpuid_on_env(CPUState *env); void kvm_inject_interrupt(CPUState *env, int mask); void kvm_update_after_sipi(CPUState *env); void kvm_update_interrupt_request(CPUState *env); #endif void kvm_set_phys_mem(target_phys_addr_t start_addr, ram_addr_t size, ram_addr_t phys_offset); void *kvm_cpu_create_phys_mem(target_phys_addr_t start_addr, unsigned long size, int log, int writable); void kvm_cpu_destroy_phys_mem(target_phys_addr_t start_addr, unsigned long size); void kvm_qemu_log_memory(target_phys_addr_t start, target_phys_addr_t size, int log); int kvm_setup_guest_memory(void *area, unsigned long size); int kvm_qemu_create_memory_alias(uint64_t phys_start, uint64_t len, uint64_t target_phys); int kvm_qemu_destroy_memory_alias(uint64_t phys_start); int kvm_arch_qemu_create_context(void); #ifndef QEMU_KVM_NO_CPU void kvm_arch_save_regs(CPUState *env); void kvm_arch_load_regs(CPUState *env); void kvm_arch_load_mpstate(CPUState *env); void kvm_arch_save_mpstate(CPUState *env); int kvm_arch_init_vcpu(CPUState *cenv); int kvm_arch_pre_run(CPUState *env, struct kvm_run *run); int kvm_arch_post_run(CPUState *env, struct kvm_run *run); int kvm_arch_has_work(CPUState *env); void kvm_arch_process_irqchip_events(CPUState *env); int kvm_arch_try_push_interrupts(void *opaque); void kvm_arch_push_nmi(void *opaque); void kvm_arch_cpu_reset(CPUState *env); int kvm_set_boot_cpu_id(uint32_t id); struct kvm_guest_debug; struct kvm_debug_exit_arch; struct kvm_sw_breakpoint { target_ulong pc; target_ulong saved_insn; int use_count; QTAILQ_ENTRY(kvm_sw_breakpoint) entry; }; QTAILQ_HEAD(kvm_sw_breakpoint_head, kvm_sw_breakpoint); int kvm_arch_debug(struct kvm_debug_exit_arch *arch_info); int kvm_sw_breakpoints_active(CPUState *env); struct kvm_sw_breakpoint *kvm_find_sw_breakpoint(CPUState *env, target_ulong pc); int kvm_arch_insert_sw_breakpoint(CPUState * current_env, struct kvm_sw_breakpoint *bp); int kvm_arch_remove_sw_breakpoint(CPUState * current_env, struct kvm_sw_breakpoint *bp); int kvm_arch_insert_hw_breakpoint(target_ulong addr, target_ulong len, int type); int kvm_arch_remove_hw_breakpoint(target_ulong addr, target_ulong len, int type); void kvm_arch_remove_all_hw_breakpoints(void); void kvm_arch_update_guest_debug(CPUState *env, struct kvm_guest_debug *dbg); #endif void qemu_kvm_aio_wait_start(void); void qemu_kvm_aio_wait(void); void qemu_kvm_aio_wait_end(void); void qemu_kvm_notify_work(void); #ifndef QEMU_KVM_NO_CPU void kvm_tpr_opt_setup(void); void kvm_tpr_access_report(CPUState *env, uint64_t rip, int is_write); void kvm_tpr_vcpu_start(CPUState *env); #endif int qemu_kvm_get_dirty_pages(unsigned long phys_addr, void *buf); int kvm_coalesce_mmio_region(target_phys_addr_t start, ram_addr_t size); int kvm_uncoalesce_mmio_region(target_phys_addr_t start, ram_addr_t size); int kvm_arch_init_irq_routing(void); int kvm_mmio_read(void *opaque, uint64_t addr, uint8_t * data, int len); int kvm_mmio_write(void *opaque, uint64_t addr, uint8_t * data, int len); #ifdef CONFIG_KVM_DEVICE_ASSIGNMENT struct ioperm_data; void kvm_ioperm(CPUState *env, void *data); void kvm_add_ioperm_data(struct ioperm_data *data); void kvm_remove_ioperm_data(unsigned long start_port, unsigned long num); void kvm_arch_do_ioperm(void *_data); #endif #define ALIGN(x, y) (((x)+(y)-1) & ~((y)-1)) #ifndef QEMU_KVM_NO_CPU #define BITMAP_SIZE(m) (ALIGN(((m)>>TARGET_PAGE_BITS), HOST_LONG_BITS) / 8) #endif #ifdef CONFIG_KVM #include "qemu-queue.h" extern int kvm_allowed; extern int kvm_irqchip; extern int kvm_pit; extern int kvm_pit_reinject; extern int kvm_nested; extern kvm_context_t kvm_context; struct ioperm_data { unsigned long start_port; unsigned long num; int turn_on; QLIST_ENTRY(ioperm_data) entries; }; void qemu_kvm_cpu_stop(CPUState *env); int kvm_arch_halt(CPUState *env); int handle_tpr_access(void *opaque, CPUState *env, uint64_t rip, int is_write); int kvm_has_sync_mmu(void); #define kvm_enabled() (kvm_allowed) #define qemu_kvm_pit_in_kernel() kvm_pit_in_kernel(kvm_context) #define qemu_kvm_has_gsi_routing() kvm_has_gsi_routing(kvm_context) #ifdef TARGET_I386 #define qemu_kvm_has_pit_state2() kvm_has_pit_state2(kvm_context) #endif void kvm_init_vcpu(CPUState *env); void kvm_load_tsc(CPUState *env); #else #define kvm_has_sync_mmu() (0) #define kvm_enabled() (0) #define kvm_nested 0 #define qemu_kvm_pit_in_kernel() (0) #define qemu_kvm_has_gsi_routing() (0) #ifndef QEMU_KVM_NO_CPU #ifdef TARGET_I386 #define qemu_kvm_has_pit_state2() (0) #endif #define kvm_load_registers(env) do {} while(0) #define kvm_save_registers(env) do {} while(0) #define kvm_save_mpstate(env) do {} while(0) #define qemu_kvm_cpu_stop(env) do {} while(0) static inline void kvm_init_vcpu(CPUState *env) { } static inline void kvm_load_tsc(CPUState *env) { } #endif #endif void kvm_mutex_unlock(void); void kvm_mutex_lock(void); int kvm_physical_sync_dirty_bitmap(target_phys_addr_t start_addr, target_phys_addr_t end_addr); int kvm_log_start(target_phys_addr_t phys_addr, target_phys_addr_t len); int kvm_log_stop(target_phys_addr_t phys_addr, target_phys_addr_t len); static inline int kvm_sync_vcpus(void) { return 0; } #ifndef QEMU_KVM_NO_CPU void kvm_arch_get_registers(CPUState *env); static inline void kvm_arch_put_registers(CPUState *env) { kvm_load_registers(env); } void kvm_cpu_synchronize_state(CPUState *env); static inline void cpu_synchronize_state(CPUState *env) { if (kvm_enabled()) { kvm_cpu_synchronize_state(env); } } uint32_t kvm_arch_get_supported_cpuid(CPUState *env, uint32_t function, int reg); #endif static inline int kvm_set_migration_log(int enable) { return kvm_physical_memory_set_dirty_tracking(enable); } int kvm_irqchip_in_kernel(void); #ifdef CONFIG_KVM typedef struct KVMSlot { target_phys_addr_t start_addr; ram_addr_t memory_size; ram_addr_t phys_offset; int slot; int flags; } KVMSlot; typedef struct kvm_dirty_log KVMDirtyLog; typedef struct KVMState { KVMSlot slots[32]; int fd; int vmfd; int coalesced_mmio; int broken_set_mem_region; int migration_log; int vcpu_events; #ifdef KVM_CAP_SET_GUEST_DEBUG QTAILQ_HEAD(, kvm_sw_breakpoint) kvm_sw_breakpoints; #endif int irqchip_in_kernel; struct kvm_context kvm_context; } KVMState; extern KVMState *kvm_state; int kvm_ioctl(KVMState *s, int type, ...); int kvm_vm_ioctl(KVMState *s, int type, ...); int kvm_vcpu_ioctl(CPUState *env, int type, ...); int kvm_check_extension(KVMState *s, unsigned int ext); int kvm_tpr_enable_vapic(CPUState *env); #endif #endif