diff options
Diffstat (limited to 'sci-libs/bigdft/files/bigdft-1.6-tuto.1-bigdft.pc-1.patch')
| -rw-r--r-- | sci-libs/bigdft/files/bigdft-1.6-tuto.1-bigdft.pc-1.patch | 207 |
1 files changed, 0 insertions, 207 deletions
diff --git a/sci-libs/bigdft/files/bigdft-1.6-tuto.1-bigdft.pc-1.patch b/sci-libs/bigdft/files/bigdft-1.6-tuto.1-bigdft.pc-1.patch deleted file mode 100644 index 7c3380a9b..000000000 --- a/sci-libs/bigdft/files/bigdft-1.6-tuto.1-bigdft.pc-1.patch +++ /dev/null @@ -1,207 +0,0 @@ -diff -Naur bigdft-1.6-tuto_orig/Makefile.am bigdft-1.6-tuto/Makefile.am ---- Makefile.am 2011-10-18 07:39:52.000000000 +0000 -+++ Makefile.am 2012-03-21 10:08:44.000000000 +0000 -@@ -4,7 +4,10 @@ - - ACLOCAL_AMFLAGS = -I config/m4 - --DISTCLEANFILES = config.inc -+DISTCLEANFILES = config.inc bigdft.pc -+ -+pkgconfigdir = $(libdir)/pkgconfig -+pkgconfig_DATA = bigdft.pc - - if BUILD_LIBABINIT - libABINIT_dir = libABINIT/src -diff -Naur bigdft-1.6-tuto_orig/Makefile.in bigdft-1.6-tuto/Makefile.in ---- Makefile.in 2012-03-21 10:03:28.000000000 +0000 -+++ Makefile.in 2012-03-21 10:20:48.000000000 +0000 -@@ -33,7 +33,7 @@ - POST_UNINSTALL = : - subdir = . - DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ -- $(srcdir)/Makefile.in $(srcdir)/config.h.in \ -+ $(srcdir)/Makefile.in $(srcdir)/bigdft.pc.in $(srcdir)/config.h.in \ - $(top_srcdir)/config/Doxyfile.in $(top_srcdir)/configure \ - AUTHORS COPYING ChangeLog INSTALL NEWS config/depcomp \ - config/install-sh config/missing -@@ -48,7 +48,7 @@ - configure.lineno config.status.lineno - mkinstalldirs = $(install_sh) -d - CONFIG_HEADER = config.h --CONFIG_CLEAN_FILES = config/Doxyfile -+CONFIG_CLEAN_FILES = bigdft.pc config/Doxyfile - CONFIG_CLEAN_VPATH_FILES = - SOURCES = - DIST_SOURCES = -@@ -59,6 +59,35 @@ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -+am__vpath_adj = case $$p in \ -+ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ -+ *) f=$$p;; \ -+ esac; -+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -+am__install_max = 40 -+am__nobase_strip_setup = \ -+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -+am__nobase_strip = \ -+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -+am__nobase_list = $(am__nobase_strip_setup); \ -+ for p in $$list; do echo "$$p $$p"; done | \ -+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ -+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ -+ if (++n[$$2] == $(am__install_max)) \ -+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ -+ END { for (dir in files) print dir, files[dir] }' -+am__base_list = \ -+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ -+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -+am__uninstall_files_from_dir = { \ -+ test -z "$$files" \ -+ || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ -+ || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ -+ $(am__cd) "$$dir" && rm -f $$files; }; \ -+ } -+am__installdirs = "$(DESTDIR)$(pkgconfigdir)" -+DATA = $(pkgconfig_DATA) - RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive - AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ -@@ -232,7 +261,9 @@ - config/m4 - - ACLOCAL_AMFLAGS = -I config/m4 --DISTCLEANFILES = config.inc -+DISTCLEANFILES = config.inc bigdft.pc -+pkgconfigdir = $(libdir)/pkgconfig -+pkgconfig_DATA = bigdft.pc - @BUILD_LIBABINIT_FALSE@libABINIT_dir = - @BUILD_LIBABINIT_TRUE@libABINIT_dir = libABINIT/src - @BUILD_LIBXC_FALSE@libXC_dir = -@@ -307,8 +338,28 @@ - - distclean-hdr: - -rm -f config.h stamp-h1 -+bigdft.pc: $(top_builddir)/config.status $(srcdir)/bigdft.pc.in -+ cd $(top_builddir) && $(SHELL) ./config.status $@ - config/Doxyfile: $(top_builddir)/config.status $(top_srcdir)/config/Doxyfile.in - cd $(top_builddir) && $(SHELL) ./config.status $@ -+install-pkgconfigDATA: $(pkgconfig_DATA) -+ @$(NORMAL_INSTALL) -+ test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" -+ @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ -+ for p in $$list; do \ -+ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ -+ echo "$$d$$p"; \ -+ done | $(am__base_list) | \ -+ while read files; do \ -+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ -+ $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ -+ done -+ -+uninstall-pkgconfigDATA: -+ @$(NORMAL_UNINSTALL) -+ @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ -+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ -+ dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) - - # This directory's subdirectories are mostly independent; you can cd - # into them and run `make' without going through this Makefile. -@@ -622,9 +673,12 @@ - exit 1; } >&2 - check-am: all-am - check: check-recursive --all-am: Makefile config.h -+all-am: Makefile $(DATA) config.h - installdirs: installdirs-recursive - installdirs-am: -+ for dir in "$(DESTDIR)$(pkgconfigdir)"; do \ -+ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ -+ done - install: install-recursive - install-exec: install-exec-recursive - install-data: install-data-recursive -@@ -672,7 +726,7 @@ - - info-am: - --install-data-am: -+install-data-am: install-pkgconfigDATA - - install-dvi: install-dvi-recursive - -@@ -718,7 +772,7 @@ - - ps-am: - --uninstall-am: -+uninstall-am: uninstall-pkgconfigDATA - - .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \ - ctags-recursive install-am install-strip tags-recursive -@@ -733,10 +787,10 @@ - install-data-am install-dvi install-dvi-am install-exec \ - install-exec-am install-html install-html-am install-info \ - install-info-am install-man install-pdf install-pdf-am \ -- install-ps install-ps-am install-strip installcheck \ -+ install-pkgconfigDATA install-ps install-ps-am install-strip installcheck \ - installcheck-am installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ -- pdf-am ps ps-am tags tags-recursive uninstall uninstall-am -+ pdf-am ps ps-am tags tags-recursive uninstall uninstall-am uninstall-pkgconfigDATA - - configure - -diff -Naur bigdft-1.6-tuto_orig/bigdft.pc.in bigdft-1.6-tuto/bigdft.pc.in ---- bigdft.pc.in 1970-01-01 00:00:00.000000000 +0000 -+++ bigdft.pc.in 2012-02-01 09:43:59.000000000 +0000 -@@ -0,0 +1,15 @@ -+@USE_CUDA_GPU_FALSE@libs_cuda= -+@USE_CUDA_GPU_TRUE@libs_cuda=$(top_builddir)/src/CUDA/libGPU.a -+@USE_OCL_FALSE@libs_ocl= -+@USE_OCL_TRUE@libs_ocl=$(top_builddir)/src/OpenCL/libOCL.a -lstdc++ -+prefix=@prefix@ -+exec_prefix=@exec_prefix@ -+libdir=@libdir@ -+includedir=@includedir@ -+ -+Name: libbigdft -+Description: Library for DFT calculation over wavelets. -+Requires: -+Version: @VERSION@ -+Libs: -L${libdir} -lbigdft -lpoissonsolver ${libs_cuda} ${libs_ocl} @LIBS@ @FCLIBS@ -+Cflags: -I${includedir} -diff -Naur bigdft-1.6-tuto_orig/configure bigdft-1.6-tuto/configure ---- configure 2012-03-21 10:03:26.000000000 +0000 -+++ configure 2012-03-21 11:04:52.000000000 +0000 -@@ -8512,7 +8512,7 @@ - docdir="${docdir}" - - --ac_config_files="$ac_config_files Makefile libABINIT/src/Makefile config/Doxyfile src/Makefile src/modules/Makefile src/modules/configure.inc src/profiling/Makefile src/PSolver/Makefile src/convolutions/Makefile src/CUDA/Makefile src/OpenCL/Makefile src/dgemmsy/Makefile src/convolutions-c/Makefile src/art/Makefile src/tools/Makefile src/tools/bader/Makefile utils/Makefile utils/PSPfiles/Makefile pseudo/Makefile pseudo/src/Makefile pseudo/tests/Makefile doc/Makefile tests/Makefile tests/fft/Makefile tests/PSolver/Makefile tests/H2-freq/Makefile tests/MINHOP/Makefile tests/NEB/Makefile tests/NEB/input tests/NEB/NEB_include.sh tests/XabsCheb/Makefile tests/SPLSAD/Makefile tests/TDDFT/Makefile tests/OP2P/Makefile tests/DFT/Makefile tests/OpenCL/Makefile tests/CUDA/Makefile tests/ETSF_IO/Makefile tests/tutorials/Makefile tests/xc/Makefile" -+ac_config_files="$ac_config_files Makefile bigdft.pc libABINIT/src/Makefile config/Doxyfile src/Makefile src/modules/Makefile src/modules/configure.inc src/profiling/Makefile src/PSolver/Makefile src/convolutions/Makefile src/CUDA/Makefile src/OpenCL/Makefile src/dgemmsy/Makefile src/convolutions-c/Makefile src/art/Makefile src/tools/Makefile src/tools/bader/Makefile utils/Makefile utils/PSPfiles/Makefile pseudo/Makefile pseudo/src/Makefile pseudo/tests/Makefile doc/Makefile tests/Makefile tests/fft/Makefile tests/PSolver/Makefile tests/H2-freq/Makefile tests/MINHOP/Makefile tests/NEB/Makefile tests/NEB/input tests/NEB/NEB_include.sh tests/XabsCheb/Makefile tests/SPLSAD/Makefile tests/TDDFT/Makefile tests/OP2P/Makefile tests/DFT/Makefile tests/OpenCL/Makefile tests/CUDA/Makefile tests/ETSF_IO/Makefile tests/tutorials/Makefile tests/xc/Makefile" - - - # Call libXC ./configure script recursively. -@@ -9349,6 +9349,7 @@ - "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; - "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; - "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; -+ "bigdft.pc") CONFIG_FILES="$CONFIG_FILES bigdft.pc" ;; - "libABINIT/src/Makefile") CONFIG_FILES="$CONFIG_FILES libABINIT/src/Makefile" ;; - "config/Doxyfile") CONFIG_FILES="$CONFIG_FILES config/Doxyfile" ;; - "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; -diff -Naur bigdft-1.6-tuto_orig/configure.ac bigdft-1.6-tuto/configure.ac ---- configure.ac 2012-03-21 10:03:02.000000000 +0000 -+++ configure.ac 2012-03-21 10:48:53.000000000 +0000 -@@ -715,6 +715,7 @@ - dnl Give the name of file.in to transform to file - AC_CONFIG_FILES([ - Makefile -+bigdft.pc - libABINIT/src/Makefile - config/Doxyfile - src/Makefile |