aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat (limited to 'sci-misc/salome-kernel/salome-kernel-3.2.6.ebuild')
-rw-r--r--sci-misc/salome-kernel/salome-kernel-3.2.6.ebuild183
1 files changed, 0 insertions, 183 deletions
diff --git a/sci-misc/salome-kernel/salome-kernel-3.2.6.ebuild b/sci-misc/salome-kernel/salome-kernel-3.2.6.ebuild
deleted file mode 100644
index 21d2d4ba8..000000000
--- a/sci-misc/salome-kernel/salome-kernel-3.2.6.ebuild
+++ /dev/null
@@ -1,183 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: $
-
-EAPI="1"
-inherit autotools distutils eutils flag-o-matic toolchain-funcs versionator python multilib
-
-DESCRIPTION="SALOME : The Open Source Integration Platform for Numerical Simulation. KERNEL Component"
-HOMEPAGE="http://www.salome-platform.org"
-SRC_URI="http://files.opencascade.com/Salome${PV}/src${PV}.tar.gz"
-
-LICENSE="GPL-2"
-KEYWORDS="~amd64 ~x86"
-SLOT="0"
-IUSE="debug doc mpi opengl openpbs"
-
-RDEPEND="opengl? ( virtual/opengl )
- mpi? ( sys-cluster/mpich2 )
- debug? ( dev-util/cppunit )
- openpbs? ( sys-cluster/torque )
- dev-python/omniorbpy
- >=net-misc/omniORB-4.1.2
- x11-libs/qwt:0
- >=sci-libs/vtk-5.0.0
- >=sci-libs/opencascade-6.2"
-
-# Note that Corba is apparently not optional in this module
-
-DEPEND="${RDEPEND}
- app-doc/doxygen
- media-gfx/graphviz
- dev-libs/boost
- >=dev-python/PyQt-3.13
- >=dev-python/sip-4.1.3
- dev-python/numeric
- dev-python/docutils
- dev-lang/swig
- >=x11-libs/qt-3.3.3
- dev-lang/tk
- dev-lang/tcl
- sci-libs/hdf5"
-
-MODULE_NAME="KERNEL"
-MY_S="${WORKDIR}/src${PV}/${MODULE_NAME}_SRC_${PV}"
-INSTALL_DIR="/opt/salome-${PV}/${MODULE_NAME}"
-KERNEL_ROOT_DIR="/opt/salome-${PV}/${MODULE_NAME}"
-export OPENPBS="/usr"
-
-src_unpack() {
- python_version
- distutils_python_version
- ewarn "Python 2.4 is highly recommended for Salome..."
-
- #Warn about mpi use flag for hdf5
- if built_with_use sci-libs/hdf5 mpi ; then
- ewarn "mpi use flag enabled for sci-libs/hdf5, this may cause the build to fail for salome-kernel"
- fi
-
- if ! built_with_use sci-libs/vtk python ; then
- die "You must rebuild sci-libs/vtk with python USE flag"
- fi
-
- unpack ${A}
- cd "${MY_S}"
- epatch "${FILESDIR}"/${P}_openpbs.patch
- epatch "${FILESDIR}"/${P}-Batch_Couple.patch
- epatch "${FILESDIR}"/${P}-omniorb_4.1.patch
-
- # If Python 2.5 is planned to be used, the following patch must be applied. This, however,
- # needs to be thoroughly tested!
- if version_is_at_least "2.5" "${PYVER}"; then
- epatch "${FILESDIR}"/${P}-pyobject.patch
- fi
-
- # Fix for mpich2 detection, this is also used by salome-component at least
- epatch "${FILESDIR}"/${P}-mpich2.patch
- # Gcc 4.3 support
- if version_is_at_least "4.3" $(gcc-version) ; then
- epatch "${FILESDIR}"/${P}-gcc-4.3.patch
- fi
-
- # Correct the Salome version number
- sed -i "s:3.2.5:${PV}:g" configure.ac
-
- ./clean_configure
- ./build_configure
-}
-
-
-src_compile() {
- cd "${MY_S}"
-
- local myconf="--with-tcl=/usr/$(get_libdir)/ --with-tk=/usr/$(get_libdir)/"
-
- # Compiler and linker flags
- if use amd64 ; then
- append-flags -m64
- fi
-
- # CXXFLAGS are slightly modified to allow the compilation of
- # salome-kernel with OpenCascade and gcc-4.1.x
- if version_is_at_least "4.1" $(gcc-version) ; then
- append-flags -ffriend-injection -fpermissive
- fi
-
- # Specifying --without-<flag> for mpi / mpich / openpbs
- # has the same effect as turning it on
- # so we just ommit it if it's not required to turn it off
- if use mpi ; then
- myconf="${myconf} --with-mpi --with-mpich"
- fi
- if use openpbs ; then
- myconf="${myconf} --with-openpbs"
- fi
-
-
- # Configuration
- econf --prefix=${INSTALL_DIR} \
- --docdir=${INSTALL_DIR}/share/doc/salome \
- --infodir=${INSTALL_DIR}/share/info \
- --datadir=${INSTALL_DIR}/share/salome \
- --libdir=${INSTALL_DIR}/$(get_libdir)/salome \
- --with-python-site=${INSTALL_DIR}/$(get_libdir)/python${PYVER}/site-packages/salome \
- --with-python-site-exec=${INSTALL_DIR}/$(get_libdir)/python${PYVER}/site-packages/salome \
- --enable-corba-gen \
- ${myconf} \
- $(use_enable debug ) \
- $(use_enable !debug production ) \
- $(use_with debug cppunit /usr ) \
- $(use_with opengl opengl /usr) \
- || die "configuration failed"
-
- # Compilation
- emake || die "compilation failed"
-}
-
-
-src_install() {
- cd "${MY_S}"
-
- # Installation
- emake prefix="${D}/${INSTALL_DIR}" \
- docdir="${D}/${INSTALL_DIR}/share/doc/salome" \
- infodir="${D}/${INSTALL_DIR}/share/info" \
- datadir="${D}/${INSTALL_DIR}/share/salome" \
- libdir="${D}/${INSTALL_DIR}/$(get_libdir)/salome" \
- pythondir="${D}/${INSTALL_DIR}/$(get_libdir)/python${PYVER}/site-packages" install \
- || die "emake install failed"
-
- if use amd64 ; then
- dosym ${INSTALL_DIR}/lib64 ${INSTALL_DIR}/lib
- fi
-
- echo "KERNEL_ROOT_DIR=${INSTALL_DIR}" > ./90${P}
- echo "LDPATH=${INSTALL_DIR}/$(get_libdir)/salome" >> ./90${P}
- echo "PATH=${INSTALL_DIR}/bin/salome" >> ./90${P}
- echo "PYTHONPATH=${INSTALL_DIR}/$(get_libdir)/python${PYVER}/site-packages/salome" >> ./90${P}
- doenvd 90${P}
- if use doc ; then
- dodoc AUTHORS ChangeLog INSTALL NEWS README README.FIRST.txt
- fi
-
- # Fix an import python module problem
- sed -i 's@import CORBA@from omniORB import CORBA@' "${D}"/"${INSTALL_DIR}"/bin/salome/runSalome.py
-
- # Install icon and .desktop for menu entry
- doicon "${FILESDIR}"/${PN}.png
- make_desktop_entry runSalome Salome ${PN}.png "Science;Engineering"
-}
-
-pkg_postinst() {
-
- elog "Run \`env-update && source /etc/profile\`"
- elog "now to set up the correct paths."
- elog ""
-
- ewarn "note a small change to /etc/hosts may be required"
- ewarn "salome doesn't seem to recognise localhost within the hosts file"
- ewarn "a line such as"
- ewarn "127.0.0.1 name.domain name"
- ewarn "may be required within /etc/hosts"
- ewarn ""
-}