1 files changed, 70 insertions, 0 deletions
diff --git a/app-misc/heyu/heyu-2.4.0.ebuild b/app-misc/heyu/heyu-2.4.0.ebuild
new file mode 100644
index 000000000..aa3efd387
--- /dev/null
+++ b/app-misc/heyu/heyu-2.4.0.ebuild
@@ -0,0 +1,70 @@
+# Copyright 1999-2008 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Header: $
+
+inherit eutils toolchain-funcs
+
+DESCRIPTION="Utility to control and program CM11A, CM17A and CM12U X10 interfaces."
+HOMEPAGE="http://heyu.tanj.com"
+SRC_URI="http://heyu.tanj.com/download/${P}.tgz"
+
+LICENSE="GPL-2"
+SLOT="0"
+KEYWORDS="~amd64 ~ppc ~x86"
+IUSE="kernel_Darwin kernel_FreeBSD kernel_linux cm17a dmx210 ext0 ore rfxm rfxs"
+
+src_compile() {
+	mv x10config.sample x10.conf.sample
+	./Configure							\
+		$(if use kernel_FreeBSD; then echo "freebsd"; fi)	\
+		$(if use kernel_Darwin; then echo "darwin"; fi)		\
+		$(if use kernel_linux; then echo "linux"; fi)		\
+		$(if ! use cm17a; then echo "-nocm17a"; fi)		\
+		$(if ! use dmx210; then echo "-nodmx"; fi)		\
+		$(if ! use ext0; then echo "-noext0"; fi)		\
+		$(if ! use ore; then echo "-noore"; fi)			\
+		$(if ! use rfxm; then echo "-norfxm"; fi)		\
+		$(if ! use rfxs; then echo "-norfxs"; fi)		\
+		|| die "configure failed"
+	sed -i "s/CC\s*=.*/CC = $(tc-getCC)/" "${S}"/Makefile
+	sed -i "s/CFLAGS\s*=.*/CFLAGS = ${CFLAGS} \$(DFLAGS)/" "${S}"/Makefile
+	emake || die "make failed"
+}
+
+src_install() {
+	dobin heyu || die "installing binary failed"
+	doman heyu.1 x10config.5 x10scripts.5 x10sched.5
+	newinitd "${FILESDIR}"/${PVR}/heyu.init heyu
+	diropts -o nobody -g nogroup -m 0777
+	dodir /var/tmp/heyu
+	diropts -o root -g root -m 0744
+	dodir /etc/heyu
+	keepdir /etc/heyu
+	insinto /etc/heyu
+	insopts -o root -g root -m 0644
+	doins x10.conf.sample || die "installing config sample failed"
+	doins x10.sched.sample || die "installing schedule sample failed"
+}
+
+pkg_postinst() {
+	elog
+	elog "Don't forget to tell heyu where to find your CM11 or CM17. Therefore"
+	elog "the file /etc/heyu/x10.conf must contain a line starting with 'TTY'"
+	elog "followed by the corresponding device such as:"
+	elog
+	elog "TTY /dev/ttyS0     <-- on first serial port"
+	elog "TTY /dev/ttyS1     <-- on second serial port"
+	elog "TTY /dev/ttyUSB0   <-- on USB port"
+	elog
+	elog "To use your device on a USB port, the corresponding USB serial converter"
+	elog "kernel module must be loaded. Older CM11 are usually delivered with a"
+	elog "a Prolific 2303 cable (kernel module: pl2303) while newer come with a"
+	elog "FTDI cable (kernel module: ftdi_sio)."
+	elog
+	elog "Execute the following command if you wish to start the HEYU daemon"
+	elog "at boot time:"
+	elog
+	elog "rc-update add heyu default"
+	elog
+	epause 5
+}