#
# nzbperl configuration file
# For more information, visit
# http://noisybox.net/computers/nzbperl/ 
# 
# The options should be given just like the commandline 
# options, but without leading dashes.
#
# Any options given on the commandline will override
# the options provided here.
#

# The server to connect to
server=your.newsserver.com

# The number of connections to use to the server (default = 2)
#conn=2

# The username to use for login
user=your_username

# The password to use.  Note that actually having this
# value here is a pretty big security risk and is discouraged.
#pw=secret

# If connecting over ssl, uncommend the following line.
# This will enable a secure socket connection to the  NNTP (news) 
# server.  Requires IO::Socket::SSL module to be installed.
#ssl

# If you wish to use a SOCKS proxy server to connect to your news
# provider, you can enable the socks_server option.
# The proxy, obviously, must allow you to connect to your news 
# provider on the desired port.
#socks_server=your.socksproxy.com
#or include a port number:
#socks_server=your.socksproxy.com:10183

# If you wish to tunnel your NNTP (news) traffic over HTTP through
# a proxy, you can use the http_proxy option.  Again, the HTTP proxy
# server must allow you to connect to your news provider for this
# to work.
#http_proxy=your.httpproxy.com
#or include a port number:
#http_proxy=your.httpproxy.com:10184

# If you're using a proxy server (either SOCKS or HTTP tunnel) and your 
# proxy server requires authentication, you can provide the proxy_user 
# and proxy_passwd options.
#proxy_user=my-proxy-username
#proxy_passwd=my-proxy-secretpassword

# If you wish to use ipv6, uncomment this option.  If you don't know what
# ipv6 is, then you're probably not using it (at least in 2005 this was
# still generally the case)
#ipv6

# You can explicitly specify the location of uudeview.
# The default is to be found in the path...
#uudeview=/usr/local/bin/uudeview

# Specify what bandwidth in kBps for "low" speed
#low=35

# Specify what bandwidth in kBps for "medium" speed
#med=95

# Start downloading with speed restricted to this many kBps
#speed=100

# The dlpath option tells nzbperl where to put all downloads.  All 
# downloaded files and unencoded files will be placed into the directory
# given.  Default is the current directory.
# This option conflicts with --dlrelative
#dlpath=/home/foo/downloads

# The dlrelative option tells nzbperl to put downloaded and extracted 
# files into the same directory that their nzb file came from.  This
# can allow you to have multiple nzb files in various places and to
# be sure that downloads go into their respective locations.
#dlrelative

# The dlcreate option tells nzbperl to create new subdirectires for
# each nzbfile and to place decoded files in the new directories.
# This can be useful when running with several nzbfiles and trying
# to keep some filesystem organization.
#dlcreate


# The dlcreategrp option tells nzbperl to create new subdirectories
# that correspond to the usenet group name that the file was
# downloaded from.  Each downloaded file will be placed into a 
# directory named after the group it was fetched from.
#dlcreategrp

# queuedir tells nzbperl to monitor the given directory for new nzb
# files during run time.  New nzb files will be queued and downloaded.
# Some people find more useful than restarting nzbperl.
#queuedir=/path/to/your/queue/dir

# If uncommented, the forever option will tell nzbperl to try and 
# hang around forever and never quit.  It requires the --queuedir
# option to also be specified.  This is probably what you want
# if you only want to use nzbperl as a daemon that monitors a 
# queue.
#forever

# postdec allows nzbperl to run an external command after each file
# is decoded.  If additional processing of decoded files is required,
# you may use this option.  Note: nzbperl will be (at least partially)
# blocked until the command finishes, so it's wise to wrap your
# postdec program in a shell script that forks if it does lengthy
# operations.  One easy way to accomplish this is to add an ampersand
# '&' to the end of the postdec option.
# NZBP_FILE, NZBP_TEMPFILE, NZBP_ISBROKEN environment variables will
# be passed to the program.
#postdec=/path/to/your/post_decoding_program


# postnzb allows nzbperl to run an external command after each
# nzb file is completed.  As noted above, nzbperl will become
# blocked while the program is running, so the program should
# likely fork() unless you don't mind waiting.
# Parameters to the program are: NZBP_NZBDIR, NZBP_NZBFILE,
# NZBP_DECODEDIR, and NZBP_LASTFILE
#postnzb=/path/to/your/post_nzb_program

# Diskfree tells nzbperl to stop downloading when the free space
# on the download path gets below the given percentage.  If this
# option is given and the free disk space drops below the given
# percentage, all file downloading will stop until the space is
# freed back up.
#diskfree=10

# Whether or not to keep parts files after decoding (default = no)
#keepparts

# Whether or not to continue downloading broken files when parts
# are missing.  Will leave parts files with missing/broken
# segments around on disk still encoded.
#keepbroken

# Use uudeview in a desparate mode and try and create binary files
# and allow it to decode to broken binary files.
#keepbrokenbin

# Uncomment to disable download order sorting files by subject
#nosort

# chunksize determines how many bytes are read on each pass through
# a network receive.  Most people shouldn't change this, but in some
# cases it may impact CPU usage and/or thruput.  If you experiment
# with changing this, please provide feedback/success stories.
# default value is 5k.
#chunksize=5k

# Uncomment to always redownload (don't skip existing files)
#redo

# Uncomment to disable color
#nocolor

# If your terminal doesn't support ANSI character graphics or you
# just don't want to see them, you can enable the noansi option.
#noansi

# Uncomment to prevent up-to-date version checking at startup
#noupdate

# The log file to use.  Comment out to disable logging.
log=/tmp/nzb.log

# The decodelog option tells nzbperl to append the output of 
# uudeview into the provided file.
decodelog=/tmp/nzbdbgout.txt

# The "dthreadct" option specifies how many decoder threads should be used for
# decoding.  Most users will want the default of 1, however, if you don't have
# a threaded Perl, you should set dthreadct=0 to disable all threaded functions.
# Note: the --nothread option has been deprecated in favor of --dthreadct=0 
# Default: 1
dthreadct=1

# The daemon option tells nzbperl to fork into the background and run
# as a daemon.  There's no UI with this option, and all interaction 
# should be performed with the log file and/or remote control functions.
#daemon

# If rcport is enabled, nzbperl will service clients that connect on the
# port and allow them to perform remote control operations.  This is 
# experimental, insecure, undocumented, and subject to change...
# so use at your own risk!
#rcport=9011

# Uncomment this line to bypass NZB sanity checking 
#insane

# Uncomment to auto-skip all files with suspected broken parts
#dropbad

# You probably wouldn't ever want to specify a skip value in the config file
#skip=0

# The number of seconds to wait between reconnection attempts
#retrywait=300

# The subject line filter expresssion. Probably rarely used in config file.
#filter=rar

# The *inverse* subject line filter expression...also rarely specified in 
# config files.  This will select all parts with subject lines that DO NOT 
# match the expression given.
#ifilter=par2