summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAndreas K. Hüttel <dilfridge@gentoo.org>2020-11-07 00:45:01 +0200
committerAndreas K. Hüttel <dilfridge@gentoo.org>2020-11-07 00:45:44 +0200
commit05ef0c6020603588fca7c51a9898b06c0726c300 (patch)
treedf9d2a3265a789562f12caa63ea04e67d698a3ae /profiles/default
parentsys-apps/portage: Stabilize 3.0.8 ppc, #747496 (diff)
downloadgentoo-05ef0c6020603588fca7c51a9898b06c0726c300.tar.gz
gentoo-05ef0c6020603588fca7c51a9898b06c0726c300.tar.bz2
gentoo-05ef0c6020603588fca7c51a9898b06c0726c300.zip
profiles: Finally deprecate amd64 17.0 profiles
Signed-off-by: Andreas K. Hüttel <dilfridge@gentoo.org>
Diffstat (limited to 'profiles/default')
-rw-r--r--profiles/default/linux/amd64/17.0/deprecated59
-rw-r--r--profiles/default/linux/amd64/17.0/desktop/deprecated59
-rw-r--r--profiles/default/linux/amd64/17.0/desktop/gnome/deprecated59
-rw-r--r--profiles/default/linux/amd64/17.0/desktop/gnome/systemd/deprecated59
-rw-r--r--profiles/default/linux/amd64/17.0/desktop/plasma/deprecated59
-rw-r--r--profiles/default/linux/amd64/17.0/desktop/plasma/systemd/deprecated59
-rw-r--r--profiles/default/linux/amd64/17.0/developer/deprecated59
-rw-r--r--profiles/default/linux/amd64/17.0/hardened/deprecated59
-rw-r--r--profiles/default/linux/amd64/17.0/hardened/selinux/deprecated59
-rw-r--r--profiles/default/linux/amd64/17.0/no-multilib/deprecated59
-rw-r--r--profiles/default/linux/amd64/17.0/no-multilib/hardened/deprecated59
-rw-r--r--profiles/default/linux/amd64/17.0/no-multilib/hardened/selinux/deprecated59
-rw-r--r--profiles/default/linux/amd64/17.0/selinux/deprecated59
-rw-r--r--profiles/default/linux/amd64/17.0/systemd/deprecated59
14 files changed, 826 insertions, 0 deletions
diff --git a/profiles/default/linux/amd64/17.0/deprecated b/profiles/default/linux/amd64/17.0/deprecated
new file mode 100644
index 000000000000..c11d41187d8d
--- /dev/null
+++ b/profiles/default/linux/amd64/17.0/deprecated
@@ -0,0 +1,59 @@
+default/linux/amd64/17.1
+
+The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB'
+multilib layout, and require an explicit migration.
+The migration is performed using the app-portage/unsymlink-lib tool.
+The following steps can be used to upgrade your system:
+
+1. Sync and upgrade your system to the newest package versions
+ to reduce the risk of issues.
+
+2. Install the tool:
+ # emerge -1v app-portage/unsymlink-lib
+
+3. Run 'unsymlink-lib --analyze' and check the output for obvious
+ mistakes. If you need to perform any changes to the system, remember
+ to run 'unsymlink-lib --analyze' again afterwards.
+
+[past this point do not call emerge or modify /usr manually]
+
+4. This is a very good time to make a backup.
+
+5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see
+ what is going to happen.
+
+6. Reboot your system. Check if important programs work.
+ In particular, verify that e.g. 'emerge --info' works (but do not
+ install anything). If you hit any serious problems, you can use
+ 'unsymlink-lib --rollback' to revert the changes and return to
+ step 3.
+
+7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see
+ what is going to happen but note that you're going to see a very long
+ list of files to remove.
+
+8. Switch the profile, e.g.:
+ # eselect profile set default/linux/amd64/17.1/desktop
+
+[at this point you can start using emerge again. emerge will then
+ not display this message anymore, but the remaining steps are still
+ required!]
+
+9. Rebuild gcc:
+ # emerge -1v sys-devel/gcc:9.3.0
+ [ repeat for other slots you will be using ]
+
+10. If you are using a multilib profile, rebuild all 32-bit packages.
+ This can be done using:
+ # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32
+
+11. Once the last 32-bit package is rebuilt, your package manager
+ should remove the orphaned /lib32 and /usr/lib32 symlinks. If that
+ does not happen, remove them manually:
+ # rm /lib32 /usr/lib32
+
+For known issues, please see bug #506276 [1]. If you have any problems
+with the new profiles or the migration procedure, please report a bug
+and make it block the tracker.
+
+[1] https://bugs.gentoo.org/506276
diff --git a/profiles/default/linux/amd64/17.0/desktop/deprecated b/profiles/default/linux/amd64/17.0/desktop/deprecated
new file mode 100644
index 000000000000..d29b4ea76578
--- /dev/null
+++ b/profiles/default/linux/amd64/17.0/desktop/deprecated
@@ -0,0 +1,59 @@
+default/linux/amd64/17.1/desktop
+
+The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB'
+multilib layout, and require an explicit migration.
+The migration is performed using the app-portage/unsymlink-lib tool.
+The following steps can be used to upgrade your system:
+
+1. Sync and upgrade your system to the newest package versions
+ to reduce the risk of issues.
+
+2. Install the tool:
+ # emerge -1v app-portage/unsymlink-lib
+
+3. Run 'unsymlink-lib --analyze' and check the output for obvious
+ mistakes. If you need to perform any changes to the system, remember
+ to run 'unsymlink-lib --analyze' again afterwards.
+
+[past this point do not call emerge or modify /usr manually]
+
+4. This is a very good time to make a backup.
+
+5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see
+ what is going to happen.
+
+6. Reboot your system. Check if important programs work.
+ In particular, verify that e.g. 'emerge --info' works (but do not
+ install anything). If you hit any serious problems, you can use
+ 'unsymlink-lib --rollback' to revert the changes and return to
+ step 3.
+
+7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see
+ what is going to happen but note that you're going to see a very long
+ list of files to remove.
+
+8. Switch the profile, e.g.:
+ # eselect profile set default/linux/amd64/17.1/desktop
+
+[at this point you can start using emerge again. emerge will then
+ not display this message anymore, but the remaining steps are still
+ required!]
+
+9. Rebuild gcc:
+ # emerge -1v sys-devel/gcc:9.3.0
+ [ repeat for other slots you will be using ]
+
+10. If you are using a multilib profile, rebuild all 32-bit packages.
+ This can be done using:
+ # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32
+
+11. Once the last 32-bit package is rebuilt, your package manager
+ should remove the orphaned /lib32 and /usr/lib32 symlinks. If that
+ does not happen, remove them manually:
+ # rm /lib32 /usr/lib32
+
+For known issues, please see bug #506276 [1]. If you have any problems
+with the new profiles or the migration procedure, please report a bug
+and make it block the tracker.
+
+[1] https://bugs.gentoo.org/506276
diff --git a/profiles/default/linux/amd64/17.0/desktop/gnome/deprecated b/profiles/default/linux/amd64/17.0/desktop/gnome/deprecated
new file mode 100644
index 000000000000..e65fc37f913d
--- /dev/null
+++ b/profiles/default/linux/amd64/17.0/desktop/gnome/deprecated
@@ -0,0 +1,59 @@
+default/linux/amd64/17.1/desktop/gnome
+
+The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB'
+multilib layout, and require an explicit migration.
+The migration is performed using the app-portage/unsymlink-lib tool.
+The following steps can be used to upgrade your system:
+
+1. Sync and upgrade your system to the newest package versions
+ to reduce the risk of issues.
+
+2. Install the tool:
+ # emerge -1v app-portage/unsymlink-lib
+
+3. Run 'unsymlink-lib --analyze' and check the output for obvious
+ mistakes. If you need to perform any changes to the system, remember
+ to run 'unsymlink-lib --analyze' again afterwards.
+
+[past this point do not call emerge or modify /usr manually]
+
+4. This is a very good time to make a backup.
+
+5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see
+ what is going to happen.
+
+6. Reboot your system. Check if important programs work.
+ In particular, verify that e.g. 'emerge --info' works (but do not
+ install anything). If you hit any serious problems, you can use
+ 'unsymlink-lib --rollback' to revert the changes and return to
+ step 3.
+
+7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see
+ what is going to happen but note that you're going to see a very long
+ list of files to remove.
+
+8. Switch the profile, e.g.:
+ # eselect profile set default/linux/amd64/17.1/desktop
+
+[at this point you can start using emerge again. emerge will then
+ not display this message anymore, but the remaining steps are still
+ required!]
+
+9. Rebuild gcc:
+ # emerge -1v sys-devel/gcc:9.3.0
+ [ repeat for other slots you will be using ]
+
+10. If you are using a multilib profile, rebuild all 32-bit packages.
+ This can be done using:
+ # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32
+
+11. Once the last 32-bit package is rebuilt, your package manager
+ should remove the orphaned /lib32 and /usr/lib32 symlinks. If that
+ does not happen, remove them manually:
+ # rm /lib32 /usr/lib32
+
+For known issues, please see bug #506276 [1]. If you have any problems
+with the new profiles or the migration procedure, please report a bug
+and make it block the tracker.
+
+[1] https://bugs.gentoo.org/506276
diff --git a/profiles/default/linux/amd64/17.0/desktop/gnome/systemd/deprecated b/profiles/default/linux/amd64/17.0/desktop/gnome/systemd/deprecated
new file mode 100644
index 000000000000..d5c8416510da
--- /dev/null
+++ b/profiles/default/linux/amd64/17.0/desktop/gnome/systemd/deprecated
@@ -0,0 +1,59 @@
+default/linux/amd64/17.1/desktop/gnome/systemd
+
+The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB'
+multilib layout, and require an explicit migration.
+The migration is performed using the app-portage/unsymlink-lib tool.
+The following steps can be used to upgrade your system:
+
+1. Sync and upgrade your system to the newest package versions
+ to reduce the risk of issues.
+
+2. Install the tool:
+ # emerge -1v app-portage/unsymlink-lib
+
+3. Run 'unsymlink-lib --analyze' and check the output for obvious
+ mistakes. If you need to perform any changes to the system, remember
+ to run 'unsymlink-lib --analyze' again afterwards.
+
+[past this point do not call emerge or modify /usr manually]
+
+4. This is a very good time to make a backup.
+
+5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see
+ what is going to happen.
+
+6. Reboot your system. Check if important programs work.
+ In particular, verify that e.g. 'emerge --info' works (but do not
+ install anything). If you hit any serious problems, you can use
+ 'unsymlink-lib --rollback' to revert the changes and return to
+ step 3.
+
+7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see
+ what is going to happen but note that you're going to see a very long
+ list of files to remove.
+
+8. Switch the profile, e.g.:
+ # eselect profile set default/linux/amd64/17.1/desktop
+
+[at this point you can start using emerge again. emerge will then
+ not display this message anymore, but the remaining steps are still
+ required!]
+
+9. Rebuild gcc:
+ # emerge -1v sys-devel/gcc:9.3.0
+ [ repeat for other slots you will be using ]
+
+10. If you are using a multilib profile, rebuild all 32-bit packages.
+ This can be done using:
+ # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32
+
+11. Once the last 32-bit package is rebuilt, your package manager
+ should remove the orphaned /lib32 and /usr/lib32 symlinks. If that
+ does not happen, remove them manually:
+ # rm /lib32 /usr/lib32
+
+For known issues, please see bug #506276 [1]. If you have any problems
+with the new profiles or the migration procedure, please report a bug
+and make it block the tracker.
+
+[1] https://bugs.gentoo.org/506276
diff --git a/profiles/default/linux/amd64/17.0/desktop/plasma/deprecated b/profiles/default/linux/amd64/17.0/desktop/plasma/deprecated
new file mode 100644
index 000000000000..c05ef3691bc5
--- /dev/null
+++ b/profiles/default/linux/amd64/17.0/desktop/plasma/deprecated
@@ -0,0 +1,59 @@
+default/linux/amd64/17.1/desktop/plasma
+
+The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB'
+multilib layout, and require an explicit migration.
+The migration is performed using the app-portage/unsymlink-lib tool.
+The following steps can be used to upgrade your system:
+
+1. Sync and upgrade your system to the newest package versions
+ to reduce the risk of issues.
+
+2. Install the tool:
+ # emerge -1v app-portage/unsymlink-lib
+
+3. Run 'unsymlink-lib --analyze' and check the output for obvious
+ mistakes. If you need to perform any changes to the system, remember
+ to run 'unsymlink-lib --analyze' again afterwards.
+
+[past this point do not call emerge or modify /usr manually]
+
+4. This is a very good time to make a backup.
+
+5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see
+ what is going to happen.
+
+6. Reboot your system. Check if important programs work.
+ In particular, verify that e.g. 'emerge --info' works (but do not
+ install anything). If you hit any serious problems, you can use
+ 'unsymlink-lib --rollback' to revert the changes and return to
+ step 3.
+
+7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see
+ what is going to happen but note that you're going to see a very long
+ list of files to remove.
+
+8. Switch the profile, e.g.:
+ # eselect profile set default/linux/amd64/17.1/desktop
+
+[at this point you can start using emerge again. emerge will then
+ not display this message anymore, but the remaining steps are still
+ required!]
+
+9. Rebuild gcc:
+ # emerge -1v sys-devel/gcc:9.3.0
+ [ repeat for other slots you will be using ]
+
+10. If you are using a multilib profile, rebuild all 32-bit packages.
+ This can be done using:
+ # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32
+
+11. Once the last 32-bit package is rebuilt, your package manager
+ should remove the orphaned /lib32 and /usr/lib32 symlinks. If that
+ does not happen, remove them manually:
+ # rm /lib32 /usr/lib32
+
+For known issues, please see bug #506276 [1]. If you have any problems
+with the new profiles or the migration procedure, please report a bug
+and make it block the tracker.
+
+[1] https://bugs.gentoo.org/506276
diff --git a/profiles/default/linux/amd64/17.0/desktop/plasma/systemd/deprecated b/profiles/default/linux/amd64/17.0/desktop/plasma/systemd/deprecated
new file mode 100644
index 000000000000..f817b8c47e0e
--- /dev/null
+++ b/profiles/default/linux/amd64/17.0/desktop/plasma/systemd/deprecated
@@ -0,0 +1,59 @@
+default/linux/amd64/17.1/desktop/plasma/systemd
+
+The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB'
+multilib layout, and require an explicit migration.
+The migration is performed using the app-portage/unsymlink-lib tool.
+The following steps can be used to upgrade your system:
+
+1. Sync and upgrade your system to the newest package versions
+ to reduce the risk of issues.
+
+2. Install the tool:
+ # emerge -1v app-portage/unsymlink-lib
+
+3. Run 'unsymlink-lib --analyze' and check the output for obvious
+ mistakes. If you need to perform any changes to the system, remember
+ to run 'unsymlink-lib --analyze' again afterwards.
+
+[past this point do not call emerge or modify /usr manually]
+
+4. This is a very good time to make a backup.
+
+5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see
+ what is going to happen.
+
+6. Reboot your system. Check if important programs work.
+ In particular, verify that e.g. 'emerge --info' works (but do not
+ install anything). If you hit any serious problems, you can use
+ 'unsymlink-lib --rollback' to revert the changes and return to
+ step 3.
+
+7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see
+ what is going to happen but note that you're going to see a very long
+ list of files to remove.
+
+8. Switch the profile, e.g.:
+ # eselect profile set default/linux/amd64/17.1/desktop
+
+[at this point you can start using emerge again. emerge will then
+ not display this message anymore, but the remaining steps are still
+ required!]
+
+9. Rebuild gcc:
+ # emerge -1v sys-devel/gcc:9.3.0
+ [ repeat for other slots you will be using ]
+
+10. If you are using a multilib profile, rebuild all 32-bit packages.
+ This can be done using:
+ # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32
+
+11. Once the last 32-bit package is rebuilt, your package manager
+ should remove the orphaned /lib32 and /usr/lib32 symlinks. If that
+ does not happen, remove them manually:
+ # rm /lib32 /usr/lib32
+
+For known issues, please see bug #506276 [1]. If you have any problems
+with the new profiles or the migration procedure, please report a bug
+and make it block the tracker.
+
+[1] https://bugs.gentoo.org/506276
diff --git a/profiles/default/linux/amd64/17.0/developer/deprecated b/profiles/default/linux/amd64/17.0/developer/deprecated
new file mode 100644
index 000000000000..5628b3931f36
--- /dev/null
+++ b/profiles/default/linux/amd64/17.0/developer/deprecated
@@ -0,0 +1,59 @@
+default/linux/amd64/17.1/developer
+
+The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB'
+multilib layout, and require an explicit migration.
+The migration is performed using the app-portage/unsymlink-lib tool.
+The following steps can be used to upgrade your system:
+
+1. Sync and upgrade your system to the newest package versions
+ to reduce the risk of issues.
+
+2. Install the tool:
+ # emerge -1v app-portage/unsymlink-lib
+
+3. Run 'unsymlink-lib --analyze' and check the output for obvious
+ mistakes. If you need to perform any changes to the system, remember
+ to run 'unsymlink-lib --analyze' again afterwards.
+
+[past this point do not call emerge or modify /usr manually]
+
+4. This is a very good time to make a backup.
+
+5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see
+ what is going to happen.
+
+6. Reboot your system. Check if important programs work.
+ In particular, verify that e.g. 'emerge --info' works (but do not
+ install anything). If you hit any serious problems, you can use
+ 'unsymlink-lib --rollback' to revert the changes and return to
+ step 3.
+
+7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see
+ what is going to happen but note that you're going to see a very long
+ list of files to remove.
+
+8. Switch the profile, e.g.:
+ # eselect profile set default/linux/amd64/17.1/desktop
+
+[at this point you can start using emerge again. emerge will then
+ not display this message anymore, but the remaining steps are still
+ required!]
+
+9. Rebuild gcc:
+ # emerge -1v sys-devel/gcc:9.3.0
+ [ repeat for other slots you will be using ]
+
+10. If you are using a multilib profile, rebuild all 32-bit packages.
+ This can be done using:
+ # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32
+
+11. Once the last 32-bit package is rebuilt, your package manager
+ should remove the orphaned /lib32 and /usr/lib32 symlinks. If that
+ does not happen, remove them manually:
+ # rm /lib32 /usr/lib32
+
+For known issues, please see bug #506276 [1]. If you have any problems
+with the new profiles or the migration procedure, please report a bug
+and make it block the tracker.
+
+[1] https://bugs.gentoo.org/506276
diff --git a/profiles/default/linux/amd64/17.0/hardened/deprecated b/profiles/default/linux/amd64/17.0/hardened/deprecated
new file mode 100644
index 000000000000..1c1eadf982e9
--- /dev/null
+++ b/profiles/default/linux/amd64/17.0/hardened/deprecated
@@ -0,0 +1,59 @@
+default/linux/amd64/17.1/hardened
+
+The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB'
+multilib layout, and require an explicit migration.
+The migration is performed using the app-portage/unsymlink-lib tool.
+The following steps can be used to upgrade your system:
+
+1. Sync and upgrade your system to the newest package versions
+ to reduce the risk of issues.
+
+2. Install the tool:
+ # emerge -1v app-portage/unsymlink-lib
+
+3. Run 'unsymlink-lib --analyze' and check the output for obvious
+ mistakes. If you need to perform any changes to the system, remember
+ to run 'unsymlink-lib --analyze' again afterwards.
+
+[past this point do not call emerge or modify /usr manually]
+
+4. This is a very good time to make a backup.
+
+5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see
+ what is going to happen.
+
+6. Reboot your system. Check if important programs work.
+ In particular, verify that e.g. 'emerge --info' works (but do not
+ install anything). If you hit any serious problems, you can use
+ 'unsymlink-lib --rollback' to revert the changes and return to
+ step 3.
+
+7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see
+ what is going to happen but note that you're going to see a very long
+ list of files to remove.
+
+8. Switch the profile, e.g.:
+ # eselect profile set default/linux/amd64/17.1/desktop
+
+[at this point you can start using emerge again. emerge will then
+ not display this message anymore, but the remaining steps are still
+ required!]
+
+9. Rebuild gcc:
+ # emerge -1v sys-devel/gcc:9.3.0
+ [ repeat for other slots you will be using ]
+
+10. If you are using a multilib profile, rebuild all 32-bit packages.
+ This can be done using:
+ # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32
+
+11. Once the last 32-bit package is rebuilt, your package manager
+ should remove the orphaned /lib32 and /usr/lib32 symlinks. If that
+ does not happen, remove them manually:
+ # rm /lib32 /usr/lib32
+
+For known issues, please see bug #506276 [1]. If you have any problems
+with the new profiles or the migration procedure, please report a bug
+and make it block the tracker.
+
+[1] https://bugs.gentoo.org/506276
diff --git a/profiles/default/linux/amd64/17.0/hardened/selinux/deprecated b/profiles/default/linux/amd64/17.0/hardened/selinux/deprecated
new file mode 100644
index 000000000000..7a9f9d079a5b
--- /dev/null
+++ b/profiles/default/linux/amd64/17.0/hardened/selinux/deprecated
@@ -0,0 +1,59 @@
+default/linux/amd64/17.1/hardened/selinux
+
+The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB'
+multilib layout, and require an explicit migration.
+The migration is performed using the app-portage/unsymlink-lib tool.
+The following steps can be used to upgrade your system:
+
+1. Sync and upgrade your system to the newest package versions
+ to reduce the risk of issues.
+
+2. Install the tool:
+ # emerge -1v app-portage/unsymlink-lib
+
+3. Run 'unsymlink-lib --analyze' and check the output for obvious
+ mistakes. If you need to perform any changes to the system, remember
+ to run 'unsymlink-lib --analyze' again afterwards.
+
+[past this point do not call emerge or modify /usr manually]
+
+4. This is a very good time to make a backup.
+
+5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see
+ what is going to happen.
+
+6. Reboot your system. Check if important programs work.
+ In particular, verify that e.g. 'emerge --info' works (but do not
+ install anything). If you hit any serious problems, you can use
+ 'unsymlink-lib --rollback' to revert the changes and return to
+ step 3.
+
+7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see
+ what is going to happen but note that you're going to see a very long
+ list of files to remove.
+
+8. Switch the profile, e.g.:
+ # eselect profile set default/linux/amd64/17.1/desktop
+
+[at this point you can start using emerge again. emerge will then
+ not display this message anymore, but the remaining steps are still
+ required!]
+
+9. Rebuild gcc:
+ # emerge -1v sys-devel/gcc:9.3.0
+ [ repeat for other slots you will be using ]
+
+10. If you are using a multilib profile, rebuild all 32-bit packages.
+ This can be done using:
+ # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32
+
+11. Once the last 32-bit package is rebuilt, your package manager
+ should remove the orphaned /lib32 and /usr/lib32 symlinks. If that
+ does not happen, remove them manually:
+ # rm /lib32 /usr/lib32
+
+For known issues, please see bug #506276 [1]. If you have any problems
+with the new profiles or the migration procedure, please report a bug
+and make it block the tracker.
+
+[1] https://bugs.gentoo.org/506276
diff --git a/profiles/default/linux/amd64/17.0/no-multilib/deprecated b/profiles/default/linux/amd64/17.0/no-multilib/deprecated
new file mode 100644
index 000000000000..7c071d514eed
--- /dev/null
+++ b/profiles/default/linux/amd64/17.0/no-multilib/deprecated
@@ -0,0 +1,59 @@
+default/linux/amd64/17.1/no-multilib
+
+The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB'
+multilib layout, and require an explicit migration.
+The migration is performed using the app-portage/unsymlink-lib tool.
+The following steps can be used to upgrade your system:
+
+1. Sync and upgrade your system to the newest package versions
+ to reduce the risk of issues.
+
+2. Install the tool:
+ # emerge -1v app-portage/unsymlink-lib
+
+3. Run 'unsymlink-lib --analyze' and check the output for obvious
+ mistakes. If you need to perform any changes to the system, remember
+ to run 'unsymlink-lib --analyze' again afterwards.
+
+[past this point do not call emerge or modify /usr manually]
+
+4. This is a very good time to make a backup.
+
+5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see
+ what is going to happen.
+
+6. Reboot your system. Check if important programs work.
+ In particular, verify that e.g. 'emerge --info' works (but do not
+ install anything). If you hit any serious problems, you can use
+ 'unsymlink-lib --rollback' to revert the changes and return to
+ step 3.
+
+7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see
+ what is going to happen but note that you're going to see a very long
+ list of files to remove.
+
+8. Switch the profile, e.g.:
+ # eselect profile set default/linux/amd64/17.1/desktop
+
+[at this point you can start using emerge again. emerge will then
+ not display this message anymore, but the remaining steps are still
+ required!]
+
+9. Rebuild gcc:
+ # emerge -1v sys-devel/gcc:9.3.0
+ [ repeat for other slots you will be using ]
+
+10. If you are using a multilib profile, rebuild all 32-bit packages.
+ This can be done using:
+ # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32
+
+11. Once the last 32-bit package is rebuilt, your package manager
+ should remove the orphaned /lib32 and /usr/lib32 symlinks. If that
+ does not happen, remove them manually:
+ # rm /lib32 /usr/lib32
+
+For known issues, please see bug #506276 [1]. If you have any problems
+with the new profiles or the migration procedure, please report a bug
+and make it block the tracker.
+
+[1] https://bugs.gentoo.org/506276
diff --git a/profiles/default/linux/amd64/17.0/no-multilib/hardened/deprecated b/profiles/default/linux/amd64/17.0/no-multilib/hardened/deprecated
new file mode 100644
index 000000000000..b5d8bd8b093d
--- /dev/null
+++ b/profiles/default/linux/amd64/17.0/no-multilib/hardened/deprecated
@@ -0,0 +1,59 @@
+default/linux/amd64/17.1/no-multilib/hardened
+
+The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB'
+multilib layout, and require an explicit migration.
+The migration is performed using the app-portage/unsymlink-lib tool.
+The following steps can be used to upgrade your system:
+
+1. Sync and upgrade your system to the newest package versions
+ to reduce the risk of issues.
+
+2. Install the tool:
+ # emerge -1v app-portage/unsymlink-lib
+
+3. Run 'unsymlink-lib --analyze' and check the output for obvious
+ mistakes. If you need to perform any changes to the system, remember
+ to run 'unsymlink-lib --analyze' again afterwards.
+
+[past this point do not call emerge or modify /usr manually]
+
+4. This is a very good time to make a backup.
+
+5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see
+ what is going to happen.
+
+6. Reboot your system. Check if important programs work.
+ In particular, verify that e.g. 'emerge --info' works (but do not
+ install anything). If you hit any serious problems, you can use
+ 'unsymlink-lib --rollback' to revert the changes and return to
+ step 3.
+
+7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see
+ what is going to happen but note that you're going to see a very long
+ list of files to remove.
+
+8. Switch the profile, e.g.:
+ # eselect profile set default/linux/amd64/17.1/desktop
+
+[at this point you can start using emerge again. emerge will then
+ not display this message anymore, but the remaining steps are still
+ required!]
+
+9. Rebuild gcc:
+ # emerge -1v sys-devel/gcc:9.3.0
+ [ repeat for other slots you will be using ]
+
+10. If you are using a multilib profile, rebuild all 32-bit packages.
+ This can be done using:
+ # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32
+
+11. Once the last 32-bit package is rebuilt, your package manager
+ should remove the orphaned /lib32 and /usr/lib32 symlinks. If that
+ does not happen, remove them manually:
+ # rm /lib32 /usr/lib32
+
+For known issues, please see bug #506276 [1]. If you have any problems
+with the new profiles or the migration procedure, please report a bug
+and make it block the tracker.
+
+[1] https://bugs.gentoo.org/506276
diff --git a/profiles/default/linux/amd64/17.0/no-multilib/hardened/selinux/deprecated b/profiles/default/linux/amd64/17.0/no-multilib/hardened/selinux/deprecated
new file mode 100644
index 000000000000..0d123229db03
--- /dev/null
+++ b/profiles/default/linux/amd64/17.0/no-multilib/hardened/selinux/deprecated
@@ -0,0 +1,59 @@
+default/linux/amd64/17.1/no-multilib/hardened/selinux
+
+The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB'
+multilib layout, and require an explicit migration.
+The migration is performed using the app-portage/unsymlink-lib tool.
+The following steps can be used to upgrade your system:
+
+1. Sync and upgrade your system to the newest package versions
+ to reduce the risk of issues.
+
+2. Install the tool:
+ # emerge -1v app-portage/unsymlink-lib
+
+3. Run 'unsymlink-lib --analyze' and check the output for obvious
+ mistakes. If you need to perform any changes to the system, remember
+ to run 'unsymlink-lib --analyze' again afterwards.
+
+[past this point do not call emerge or modify /usr manually]
+
+4. This is a very good time to make a backup.
+
+5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see
+ what is going to happen.
+
+6. Reboot your system. Check if important programs work.
+ In particular, verify that e.g. 'emerge --info' works (but do not
+ install anything). If you hit any serious problems, you can use
+ 'unsymlink-lib --rollback' to revert the changes and return to
+ step 3.
+
+7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see
+ what is going to happen but note that you're going to see a very long
+ list of files to remove.
+
+8. Switch the profile, e.g.:
+ # eselect profile set default/linux/amd64/17.1/desktop
+
+[at this point you can start using emerge again. emerge will then
+ not display this message anymore, but the remaining steps are still
+ required!]
+
+9. Rebuild gcc:
+ # emerge -1v sys-devel/gcc:9.3.0
+ [ repeat for other slots you will be using ]
+
+10. If you are using a multilib profile, rebuild all 32-bit packages.
+ This can be done using:
+ # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32
+
+11. Once the last 32-bit package is rebuilt, your package manager
+ should remove the orphaned /lib32 and /usr/lib32 symlinks. If that
+ does not happen, remove them manually:
+ # rm /lib32 /usr/lib32
+
+For known issues, please see bug #506276 [1]. If you have any problems
+with the new profiles or the migration procedure, please report a bug
+and make it block the tracker.
+
+[1] https://bugs.gentoo.org/506276
diff --git a/profiles/default/linux/amd64/17.0/selinux/deprecated b/profiles/default/linux/amd64/17.0/selinux/deprecated
new file mode 100644
index 000000000000..06df9d539675
--- /dev/null
+++ b/profiles/default/linux/amd64/17.0/selinux/deprecated
@@ -0,0 +1,59 @@
+default/linux/amd64/17.1/selinux
+
+The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB'
+multilib layout, and require an explicit migration.
+The migration is performed using the app-portage/unsymlink-lib tool.
+The following steps can be used to upgrade your system:
+
+1. Sync and upgrade your system to the newest package versions
+ to reduce the risk of issues.
+
+2. Install the tool:
+ # emerge -1v app-portage/unsymlink-lib
+
+3. Run 'unsymlink-lib --analyze' and check the output for obvious
+ mistakes. If you need to perform any changes to the system, remember
+ to run 'unsymlink-lib --analyze' again afterwards.
+
+[past this point do not call emerge or modify /usr manually]
+
+4. This is a very good time to make a backup.
+
+5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see
+ what is going to happen.
+
+6. Reboot your system. Check if important programs work.
+ In particular, verify that e.g. 'emerge --info' works (but do not
+ install anything). If you hit any serious problems, you can use
+ 'unsymlink-lib --rollback' to revert the changes and return to
+ step 3.
+
+7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see
+ what is going to happen but note that you're going to see a very long
+ list of files to remove.
+
+8. Switch the profile, e.g.:
+ # eselect profile set default/linux/amd64/17.1/desktop
+
+[at this point you can start using emerge again. emerge will then
+ not display this message anymore, but the remaining steps are still
+ required!]
+
+9. Rebuild gcc:
+ # emerge -1v sys-devel/gcc:9.3.0
+ [ repeat for other slots you will be using ]
+
+10. If you are using a multilib profile, rebuild all 32-bit packages.
+ This can be done using:
+ # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32
+
+11. Once the last 32-bit package is rebuilt, your package manager
+ should remove the orphaned /lib32 and /usr/lib32 symlinks. If that
+ does not happen, remove them manually:
+ # rm /lib32 /usr/lib32
+
+For known issues, please see bug #506276 [1]. If you have any problems
+with the new profiles or the migration procedure, please report a bug
+and make it block the tracker.
+
+[1] https://bugs.gentoo.org/506276
diff --git a/profiles/default/linux/amd64/17.0/systemd/deprecated b/profiles/default/linux/amd64/17.0/systemd/deprecated
new file mode 100644
index 000000000000..9d35e3be2e3f
--- /dev/null
+++ b/profiles/default/linux/amd64/17.0/systemd/deprecated
@@ -0,0 +1,59 @@
+default/linux/amd64/17.1/systemd
+
+The amd64 17.1 profiles switch to a more standard 'no SYMLINK_LIB'
+multilib layout, and require an explicit migration.
+The migration is performed using the app-portage/unsymlink-lib tool.
+The following steps can be used to upgrade your system:
+
+1. Sync and upgrade your system to the newest package versions
+ to reduce the risk of issues.
+
+2. Install the tool:
+ # emerge -1v app-portage/unsymlink-lib
+
+3. Run 'unsymlink-lib --analyze' and check the output for obvious
+ mistakes. If you need to perform any changes to the system, remember
+ to run 'unsymlink-lib --analyze' again afterwards.
+
+[past this point do not call emerge or modify /usr manually]
+
+4. This is a very good time to make a backup.
+
+5. Run 'unsymlink-lib --migrate'. You can add '--pretend' first to see
+ what is going to happen.
+
+6. Reboot your system. Check if important programs work.
+ In particular, verify that e.g. 'emerge --info' works (but do not
+ install anything). If you hit any serious problems, you can use
+ 'unsymlink-lib --rollback' to revert the changes and return to
+ step 3.
+
+7. Run 'unsymlink-lib --finish'. You can add '--pretend' first to see
+ what is going to happen but note that you're going to see a very long
+ list of files to remove.
+
+8. Switch the profile, e.g.:
+ # eselect profile set default/linux/amd64/17.1/desktop
+
+[at this point you can start using emerge again. emerge will then
+ not display this message anymore, but the remaining steps are still
+ required!]
+
+9. Rebuild gcc:
+ # emerge -1v sys-devel/gcc:9.3.0
+ [ repeat for other slots you will be using ]
+
+10. If you are using a multilib profile, rebuild all 32-bit packages.
+ This can be done using:
+ # emerge -1v --deep /lib32 /usr/lib32 /usr/lib/llvm/*/lib32
+
+11. Once the last 32-bit package is rebuilt, your package manager
+ should remove the orphaned /lib32 and /usr/lib32 symlinks. If that
+ does not happen, remove them manually:
+ # rm /lib32 /usr/lib32
+
+For known issues, please see bug #506276 [1]. If you have any problems
+with the new profiles or the migration procedure, please report a bug
+and make it block the tracker.
+
+[1] https://bugs.gentoo.org/506276