sys-boot/lilo: Removed old.

Package-Manager: portage-2.2.25
Signed-off-by: Lars Wendler <polynomial-c@gentoo.org>

3 files changed, 0 insertions, 452 deletions

diff --git a/sys-boot/lilo/files/lilo-23.0-make.patch b/sys-boot/lilo/files/lilo-23.0-make.patch
deleted file mode 100644
index 00b15c52ca07..000000000000
--- a/sys-boot/lilo/files/lilo-23.0-make.patch
+++ /dev/null
@@ -1,103 +0,0 @@
---- a/Makefile	2010-06-18 19:17:48.000000000 +0200
-+++ b/Makefile	2010-07-20 02:00:18.000000000 +0200
-@@ -26,19 +26,19 @@
- # everything needed to run, just short of installation
- #
- all: test
--	make -C src all
-+	$(MAKE) -C src all
- 
- #
- # everything above plus the statically linked version
- #
- alles: test
--	make -C src alles
-+	$(MAKE) -C src alles
- 
- #
- # documentation files
- #
- docs:
--	make -C doc all
-+	$(MAKE) -C doc all
- 
- #
- # if you have the 'bcc' compiler, then you can make the diagnostics, too
-@@ -55,23 +55,23 @@
- 	@echo before you proceed from this point.
- 	@echo "Press <Enter> to continue, <^C> to abort ..."
- 	@read
--	@make -C src floppy1
-+	@$(MAKE) -C src floppy1
- 	@echo Done.
- 	@echo
- 	@echo Remove the floppy from the drive.  Label it "\"1.6\""
- 	@echo "Press <Enter> to continue, <^C> to abort ..."
- 	@read
--	@make -C src floppy2
-+	@$(MAKE) -C src floppy2
- 	@echo Done.
- 	@echo
- 	@echo Remove the floppy from the drive.  Label it "\"2.4\""
- 	@echo
- 
- diagnostic: test
--	make -C src diagnostic
-+	$(MAKE) -C src diagnostic
- 
- dosexe: test
--	make -C dos lilo
-+	$(MAKE) -C dos lilo
- 
- #
- # test for compilers & utilities
-@@ -85,33 +85,33 @@
- # shorthand install, if one knows that one has the 'bcc' compiler
- #
- ins:
--	make -C src ins
-+	$(MAKE) -C src ins
- 
- #
- #  normal install, but doesn't make the diagnostic binaries
- #
- install:  all
--	make -C src install
--	make -C man install
--	make -C dos install
--	make -C src insobs
-+	$(MAKE) -C src install
-+	$(MAKE) -C man install
-+	$(MAKE) -C dos install
-+	$(MAKE) -C src insobs
- 
- tidy:
--	make -C src tidy
--	make -C diagnose tidy
--	make -C dos tidy
--	make -C doc tidy
-+	$(MAKE) -C src tidy
-+	$(MAKE) -C diagnose tidy
-+	$(MAKE) -C dos tidy
-+	$(MAKE) -C doc tidy
- 
- clean: tidy
- 	rm -f test.img
--	make -C src clean
--	make -C diagnose clean
--	make -C dos clean
-+	$(MAKE) -C src clean
-+	$(MAKE) -C diagnose clean
-+	$(MAKE) -C dos clean
- 
- spotless: distclean
- distclean: clean
--	make -C src distclean
--	make -C diagnose distclean
--	make -C dos distclean
--	make -C doc clean
-+	$(MAKE) -C src distclean
-+	$(MAKE) -C diagnose distclean
-+	$(MAKE) -C dos distclean
-+	$(MAKE) -C doc clean
- 
diff --git a/sys-boot/lilo/lilo-23.2-r1.ebuild b/sys-boot/lilo/lilo-23.2-r1.ebuild
deleted file mode 100644
index 84e2073d093e..000000000000
--- a/sys-boot/lilo/lilo-23.2-r1.ebuild
+++ /dev/null
@@ -1,173 +0,0 @@
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI="2"
-
-inherit eutils flag-o-matic toolchain-funcs
-
-DOLILO_V="0.5"
-IUSE="static minimal pxeserial device-mapper"
-
-DESCRIPTION="Standard Linux boot loader"
-HOMEPAGE="https://alioth.debian.org/projects/lilo/"
-
-DOLILO_TAR="dolilo-${DOLILO_V}.tar.bz2"
-SRC_URI="
-	http://lilo.alioth.debian.org/ftp/sources/${P}.tar.gz
-	mirror://gentoo/${DOLILO_TAR}
-"
-
-SLOT="0"
-LICENSE="BSD GPL-2"
-KEYWORDS="-* ~amd64 ~x86"
-
-DEPEND=">=sys-devel/bin86-0.15.5"
-RDEPEND="device-mapper? ( >=sys-fs/lvm2-2.02.45 )"
-
-src_prepare() {
-	# this patch is needed when booting PXE and the device you're using
-	# emulates vga console via serial console.
-	# IE..  B.B.o.o.o.o.t.t.i.i.n.n.g.g....l.l.i.i.n.n.u.u.x.x and stair stepping.
-	use pxeserial && epatch "${FILESDIR}/${PN}-22.8-novga.patch"
-
-	# Do not strip and have parallel make
-	# FIXME: images/Makefile does weird stuff
-	sed -i Makefile src/Makefile \
-		-e '/strip/d;s|^	make|	$(MAKE)|g' \
-		-e '/images install/d' \
-		-e '/images all/d' \
-		|| die "sed strip failed"
-}
-
-src_compile() {
-	# lilo needs this. bug #140209
-	export LC_ALL=C
-
-	# hardened automatic PIC plus PIE building should be suppressed
-	# because of assembler instructions that cannot be compiled PIC
-	HARDENED_CFLAGS="`test-flags-CC -fno-pic -nopie`"
-
-	# we explicitly prevent the custom CFLAGS for stability reasons
-	if use static; then
-		emake CC="$(tc-getCC) ${LDFLAGS} ${HARDENED_CFLAGS}" alles || die
-	else
-		emake CC="$(tc-getCC) ${LDFLAGS} ${HARDENED_CFLAGS}" all || die
-	fi
-}
-
-src_install() {
-	keepdir /boot
-	emake DESTDIR="${D}" install || die
-
-	if use !minimal; then
-		into /
-		dosbin "${WORKDIR}"/dolilo/dolilo || die
-
-		into /usr
-		dosbin keytab-lilo.pl || die
-
-		insinto /etc
-		newins "${FILESDIR}"/lilo.conf lilo.conf.example || die
-
-		newconfd "${WORKDIR}"/dolilo/dolilo.conf.d dolilo.example || die
-
-		dodoc CHANGELOG* readme/README.* readme/INCOMPAT README
-		docinto samples ; dodoc sample/*
-	fi
-}
-
-# Check whether LILO is installed
-# This function is from /usr/sbin/mkboot from debianutils, with copyright:
-#
-#   Debian GNU/Linux
-#   Copyright 1996-1997 Guy Maor <maor@debian.org>
-#
-# Modified for Gentoo for use with the lilo ebuild by:
-#   Martin Schlemmer <azarah@gentoo.org> (16 Mar 2003)
-#
-lilocheck() {
-	local bootpart=
-	local rootpart="$(mount | grep -v "tmpfs" | grep -v "rootfs" | grep "on / " | cut -f1 -d " ")"
-
-	echo
-	einfon "Checking for LILO ..."
-
-	if [ "$(whoami)" != "root" ]
-	then
-		echo; echo
-		eerror "Only root can check for LILO!"
-		return 1
-	fi
-
-	if [ -z "${rootpart}" ]
-	then
-		echo; echo
-		eerror "Could not determine root partition!"
-		return 1
-	fi
-
-	if [ ! -f /etc/lilo.conf -o ! -x /sbin/lilo ]
-	then
-		echo " No"
-		return 1
-	fi
-
-	bootpart="$(sed -n "s:^boot[ ]*=[ ]*\(.*\)[ ]*:\1:p" /etc/lilo.conf)"
-
-	if [ -z "${bootpart}" ]
-	then
-		# lilo defaults to current root when 'boot=' is not present
-		bootpart="${rootpart}"
-	fi
-
-	if ! dd if=${bootpart} ibs=16 count=1 2>&- | grep -q 'LILO'
-	then
-		echo; echo
-		ewarn "Yes, but I couldn't find a LILO signature on ${bootpart}"
-		ewarn "Check your /etc/lilo.conf, or run /sbin/lilo by hand."
-		return 1
-	fi
-
-	echo " Yes, on ${bootpart}"
-
-	return 0
-}
-
-pkg_postinst() {
-	if [ ! -e "${ROOT}/boot/boot.b" -a ! -L "${ROOT}/boot/boot.b" ]
-	then
-		[ -f "${ROOT}/boot/boot-menu.b" ] && \
-			ln -snf boot-menu.b "${ROOT}/boot/boot.b"
-	fi
-
-	if [ "${ROOT}" = "/" ] && use !minimal;
-	then
-		if lilocheck
-		then
-			einfo "Running DOLILO to complete the install ..."
-			# do not redirect to /dev/null because it may display some input
-			# prompt
-			/sbin/dolilo
-			if [ "$?" -ne 0 ]
-			then
-				echo
-				ewarn "Running /sbin/dolilo failed!  Please check what the problem is"
-				ewarn "before your next reboot."
-
-				ebeep 5
-				epause 5
-			fi
-		fi
-		echo
-	fi
-	if use !minimal; then
-		echo
-		einfo "Issue 'dolilo' instead of 'lilo' to have a friendly wrapper that"
-		einfo "handles mounting and unmounting /boot for you. It can do more then"
-		einfo "that when asked, edit /etc/conf.d/dolilo to harness it's full potential."
-		ebeep 5
-		epause 3
-		echo
-	fi
-}
diff --git a/sys-boot/lilo/lilo-24.0.ebuild b/sys-boot/lilo/lilo-24.0.ebuild
deleted file mode 100644
index 013415a6f5f5..000000000000
--- a/sys-boot/lilo/lilo-24.0.ebuild
+++ /dev/null
@@ -1,176 +0,0 @@
-# Copyright 1999-2014 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI="5"
-
-inherit eutils flag-o-matic toolchain-funcs
-
-DOLILO_V="0.5"
-IUSE="static minimal pxeserial device-mapper"
-
-DESCRIPTION="Standard Linux boot loader"
-HOMEPAGE="https://alioth.debian.org/projects/lilo/"
-
-DOLILO_TAR="dolilo-${DOLILO_V}.tar.bz2"
-SRC_URI="
-	http://lilo.alioth.debian.org/ftp/sources/${P}.tar.gz
-	mirror://gentoo/${DOLILO_TAR}
-"
-
-SLOT="0"
-LICENSE="BSD GPL-2"
-KEYWORDS="-* amd64 x86"
-
-DEPEND=">=sys-devel/bin86-0.15.5"
-RDEPEND="device-mapper? ( >=sys-fs/lvm2-2.02.45 )"
-
-src_prepare() {
-	# this patch is needed when booting PXE and the device you're using
-	# emulates vga console via serial console.
-	# IE..  B.B.o.o.o.o.t.t.i.i.n.n.g.g....l.l.i.i.n.n.u.u.x.x and stair stepping.
-	use pxeserial && epatch "${FILESDIR}/${P}-novga.patch"
-
-	# Do not strip and have parallel make
-	# FIXME: images/Makefile does weird stuff
-	sed -i Makefile src/Makefile \
-		-e '/strip/d;s|^	make|	$(MAKE)|g' \
-		-e '/images install/d' \
-		-e '/images all/d' \
-		|| die "sed strip failed"
-}
-
-src_configure() {
-	if ! use device-mapper; then
-		sed -i make.vars -e 's|-DDEVMAPPER||g' || die
-	fi
-}
-
-src_compile() {
-	# lilo needs this. bug #140209
-	export LC_ALL=C
-
-	# hardened automatic PIC plus PIE building should be suppressed
-	# because of assembler instructions that cannot be compiled PIC
-	HARDENED_CFLAGS=$(test-flags-CC -fno-pic -nopie)
-
-	# we explicitly prevent the custom CFLAGS for stability reasons
-	if use static; then
-		local target=alles
-	else
-		local target=all
-	fi
-
-	emake CC="$(tc-getCC) ${LDFLAGS} ${HARDENED_CFLAGS}" ${target} || die
-}
-
-src_install() {
-	keepdir /boot
-	emake DESTDIR="${D}" install || die
-
-	if use !minimal; then
-		into /
-		dosbin "${WORKDIR}"/dolilo/dolilo || die
-
-		into /usr
-		dosbin keytab-lilo.pl || die
-
-		insinto /etc
-		newins "${FILESDIR}"/lilo.conf lilo.conf.example || die
-
-		newconfd "${WORKDIR}"/dolilo/dolilo.conf.d dolilo.example || die
-
-		dodoc CHANGELOG* readme/README.* readme/INCOMPAT README
-		docinto samples ; dodoc sample/*
-	fi
-}
-
-# Check whether LILO is installed
-# This function is from /usr/sbin/mkboot from debianutils, with copyright:
-#
-#   Debian GNU/Linux
-#   Copyright 1996-1997 Guy Maor <maor@debian.org>
-#
-# Modified for Gentoo for use with the lilo ebuild by:
-#   Martin Schlemmer <azarah@gentoo.org> (16 Mar 2003)
-#
-lilocheck() {
-	local bootpart=
-	local rootpart="$(mount | grep -v "tmpfs" | grep -v "rootfs" | grep "on / " | cut -f1 -d " ")"
-
-	echo
-	einfon "Checking for LILO ..."
-
-	if [ "$(whoami)" != "root" ]
-	then
-		echo; echo
-		eerror "Only root can check for LILO!"
-		return 1
-	fi
-
-	if [ -z "${rootpart}" ]
-	then
-		echo; echo
-		eerror "Could not determine root partition!"
-		return 1
-	fi
-
-	if [ ! -f /etc/lilo.conf -o ! -x /sbin/lilo ]
-	then
-		echo " No"
-		return 1
-	fi
-
-	bootpart="$(sed -n "s:^boot[ ]*=[ ]*\(.*\)[ ]*:\1:p" /etc/lilo.conf)"
-
-	if [ -z "${bootpart}" ]
-	then
-		# lilo defaults to current root when 'boot=' is not present
-		bootpart="${rootpart}"
-	fi
-
-	if ! dd if=${bootpart} ibs=16 count=1 2>&- | grep -q 'LILO'
-	then
-		echo; echo
-		ewarn "Yes, but I couldn't find a LILO signature on ${bootpart}"
-		ewarn "Check your /etc/lilo.conf, or run /sbin/lilo by hand."
-		return 1
-	fi
-
-	echo " Yes, on ${bootpart}"
-
-	return 0
-}
-
-pkg_postinst() {
-	if [ ! -e "${ROOT}/boot/boot.b" -a ! -L "${ROOT}/boot/boot.b" ]
-	then
-		[ -f "${ROOT}/boot/boot-menu.b" ] && \
-			ln -snf boot-menu.b "${ROOT}/boot/boot.b"
-	fi
-
-	if [ "${ROOT}" = "/" ] && use !minimal;
-	then
-		if lilocheck
-		then
-			einfo "Running DOLILO to complete the install ..."
-			# do not redirect to /dev/null because it may display some input
-			# prompt
-			/sbin/dolilo
-			if [ "$?" -ne 0 ]
-			then
-				echo
-				eerror "Running /sbin/dolilo failed!  Please check what the problem is"
-				eerror "before your next reboot."
-			fi
-		fi
-		echo
-	fi
-	if use !minimal; then
-		echo
-		einfo "Issue 'dolilo' instead of 'lilo' to have a friendly wrapper that"
-		einfo "handles mounting and unmounting /boot for you. It can do more then"
-		einfo "that when asked, edit /etc/conf.d/dolilo to harness it's full potential."
-		echo
-	fi
-}