summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat (limited to 'app-backup/amanda/amanda-3.5-r1.ebuild')
-rw-r--r--app-backup/amanda/amanda-3.5-r1.ebuild498
1 files changed, 0 insertions, 498 deletions
diff --git a/app-backup/amanda/amanda-3.5-r1.ebuild b/app-backup/amanda/amanda-3.5-r1.ebuild
deleted file mode 100644
index 9d5d9a365d92..000000000000
--- a/app-backup/amanda/amanda-3.5-r1.ebuild
+++ /dev/null
@@ -1,498 +0,0 @@
-# Copyright 1999-2020 Gentoo Authors
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-inherit autotools perl-module user systemd toolchain-funcs
-
-DESCRIPTION="The Advanced Maryland Automatic Network Disk Archiver"
-HOMEPAGE="http://www.amanda.org/"
-SRC_URI="mirror://sourceforge/amanda/${P}.tar.gz"
-
-LICENSE="HPND BSD BSD-2 GPL-2+ GPL-3+"
-SLOT="0"
-IUSE="curl gnuplot ipv6 kerberos minimal ndmp nls readline s3 samba systemd xfs"
-
-KEYWORDS="~amd64 ~ppc ~ppc64 ~sparc ~x86"
-RDEPEND="sys-libs/readline:=
- virtual/awk
- app-arch/tar
- dev-lang/perl:=
- app-arch/dump
- net-misc/openssh
- >=dev-libs/glib-2.26.0
- dev-perl/JSON
- dev-perl/Encode-Locale
- nls? ( virtual/libintl )
- s3? ( >=net-misc/curl-7.10.0 )
- !s3? ( curl? ( >=net-misc/curl-7.10.0 ) )
- samba? ( net-fs/samba:= )
- kerberos? ( app-crypt/mit-krb5 )
- xfs? ( sys-fs/xfsdump )
- !minimal? (
- dev-perl/XML-Simple
- virtual/mailx
- app-arch/mt-st:=
- sys-block/mtx
- gnuplot? ( sci-visualization/gnuplot )
- app-crypt/aespipe
- app-crypt/gnupg
- )"
-
-DEPEND="${RDEPEND}
- virtual/pkgconfig
- nls? ( sys-devel/gettext )
- >=app-text/docbook-xsl-stylesheets-1.72.0
- app-text/docbook-xml-dtd
- dev-libs/libxslt
- dev-lang/swig
- "
-
-MYFILESDIR="${T}/files"
-ENVDIR="/etc/env.d"
-ENVDFILE="97amanda"
-TMPENVFILE="${T}/${ENVDFILE}"
-
-# This is a complete list of Amanda settings that the ebuild takes from the
-# build environment. This allows users to alter the behavior of the package as
-# upstream intended, but keeping with Gentoo style. We store a copy of them in
-# /etc/env.d/97amanda during the install, so that they are preserved for future
-# installed. This variable name must not start with AMANDA_, as we do not want
-# it captured into the env file.
-ENV_SETTINGS_AMANDA="
-AMANDA_GROUP_GID AMANDA_GROUP_NAME
-AMANDA_USER_NAME AMANDA_USER_UID AMANDA_USER_SH AMANDA_USER_HOMEDIR AMANDA_USER_GROUPS
-AMANDA_SERVER AMANDA_SERVER_TAPE AMANDA_SERVER_TAPE_DEVICE AMANDA_SERVER_INDEX
-AMANDA_TAR_LISTDIR AMANDA_TAR
-AMANDA_PORTS_UDP AMANDA_PORTS_TCP AMANDA_PORTS_BOTH AMANDA_PORTS
-AMANDA_CONFIG_NAME AMANDA_TMPDIR"
-
-amanda_variable_setup() {
-
- # Setting vars
- local currentamanda
-
- # Grab the current settings
- currentamanda="$(set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' | xargs)"
-
- # First we set the defaults
- [[ -z "${AMANDA_GROUP_GID}" ]] && AMANDA_GROUP_GID=87
- [[ -z "${AMANDA_GROUP_NAME}" ]] && AMANDA_GROUP_NAME=amanda
- [[ -z "${AMANDA_USER_NAME}" ]] && AMANDA_USER_NAME=amanda
- [[ -z "${AMANDA_USER_UID}" ]] && AMANDA_USER_UID=87
- [[ -z "${AMANDA_USER_SH}" ]] && AMANDA_USER_SH=/bin/bash
- [[ -z "${AMANDA_USER_HOMEDIR}" ]] && AMANDA_USER_HOMEDIR=/var/spool/amanda
- [[ -z "${AMANDA_USER_GROUPS}" ]] && AMANDA_USER_GROUPS="${AMANDA_GROUP_NAME}"
-
- # This installs Amanda, with the server. However, it could be a client,
- # just specify an alternate server name in AMANDA_SERVER.
- [[ -z "${AMANDA_SERVER}" ]] && AMANDA_SERVER="${HOSTNAME}"
- [[ -z "${AMANDA_SERVER_TAPE}" ]] && AMANDA_SERVER_TAPE="${AMANDA_SERVER}"
- [[ -z "${AMANDA_SERVER_TAPE_DEVICE}" ]] && AMANDA_SERVER_TAPE_DEVICE="/dev/nst0"
- [[ -z "${AMANDA_SERVER_INDEX}" ]] && AMANDA_SERVER_INDEX="${AMANDA_SERVER}"
- [[ -z "${AMANDA_TAR_LISTDIR}" ]] && AMANDA_TAR_LISTDIR=${AMANDA_USER_HOMEDIR}/tar-lists
- [[ -z "${AMANDA_CONFIG_NAME}" ]] && AMANDA_CONFIG_NAME=DailySet1
- [[ -z "${AMANDA_TMPDIR}" ]] && AMANDA_TMPDIR=/var/tmp/amanda
- [[ -z "${AMANDA_DBGDIR}" ]] && AMANDA_DBGDIR="$AMANDA_TMPDIR"
- # These are left empty by default
- [[ -z "${AMANDA_PORTS_UDP}" ]] && AMANDA_PORTS_UDP=
- [[ -z "${AMANDA_PORTS_TCP}" ]] && AMANDA_PORTS_TCP=
- [[ -z "${AMANDA_PORTS_BOTH}" ]] && AMANDA_PORTS_BOTH=
- [[ -z "${AMANDA_PORTS}" ]] && AMANDA_PORTS=
-
- # What tar to use
- [[ -z "${AMANDA_TAR}" ]] && AMANDA_TAR=/bin/tar
-
- # Now pull in the old stuff
- if [[ -f "${EROOT}${ENVDIR}/${ENVDFILE}" ]]; then
- # We don't just source it as we don't want everything in there.
- eval $(egrep "^AMANDA_" "${EROOT}${ENVDIR}/${ENVDFILE}" | grep -v '^AMANDA_ENV_SETTINGS')
- fi
-
- # Re-apply the new settings if any
- [ -n "${currentamanda}" ] && eval $(echo "${currentamanda}")
-
-}
-
-pkg_setup() {
- amanda_variable_setup
-
- # If USE=minimal, give out a warning, if AMANDA_SERVER is not set to
- # another host than HOSTNAME.
- if use minimal && [ "${AMANDA_SERVER}" = "${HOSTNAME}" ] ; then
- elog "You are installing a client-only version of Amanda."
- elog "You should set the variable \$AMANDA_SERVER to point at your"
- elog "Amanda-tape-server, otherwise you will have to specify its name"
- elog "when using amrecover on the client."
- elog "For example: Use something like"
- elog "AMANDA_SERVER=\"myserver\" emerge amanda"
- elog
- fi
-
- enewgroup "${AMANDA_GROUP_NAME}" "${AMANDA_GROUP_GID}"
- enewuser "${AMANDA_USER_NAME}" "${AMANDA_USER_UID}" "${AMANDA_USER_SH}" "${AMANDA_USER_HOMEDIR}" "${AMANDA_USER_GROUPS}"
-}
-
-src_unpack() {
- # we do not want the perl src_unpack
- default_src_unpack
-}
-
-src_prepare() {
- # gentoo bug #331111
- sed -i '/^check-local: check-perl$/d' "${S}"/config/automake/scripts.am || die
- sed -i '/^check-local:/s,syntax-check,,g' "${S}"/perl/Makefile.am || die
-
- # bug with glibc-2.16.0
- sed -i -e '/gets is a security/d' "${S}"/gnulib/stdio.in.h || die
-
- eautoreconf
-
- # places for us to work in
- mkdir -p "${MYFILESDIR}" || die
- # Now we store the settings we just created
- set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' > "${TMPENVFILE}" || die
-
- # Prepare our custom files
- einfo "Building custom configuration files"
- local i # our iterator
- local sedexpr # var for sed expr
- sedexpr=''
- for i in ${ENV_SETTINGS_AMANDA} ; do
- local val
- eval "val=\"\${${i}}\""
- sedexpr="${sedexpr}s|__${i}__|${val}|g;"
- done
-
- # now apply the sed expr
- for i in "${FILESDIR}"/amanda-* ; do
- sed -re "${sedexpr}" <"${i}" >"${MYFILESDIR}/`basename ${i}`" || die
- done
-
- if use minimal; then
- cat "${MYFILESDIR}"/amanda-amandahosts-server-2.5.1_p3-r1 > "${T}"/amandahosts || die
- else
- sed -i -e 's:^\(my $amandahomedir\)=.*:\1 = $localstatedir;:' \
- server-src/am{addclient,serverconfig}.pl || die
- cat "${MYFILESDIR}"/amanda-amandahosts-client-2.5.1_p3-r1 > "${T}"/amandahosts || die
- fi
-
- eapply_user
-}
-
-src_configure() {
- # fix bug #36316
- addpredict /var/cache/samba/gencache.tdb
- # fix bug #376169
- addpredict /run/blkid
- addpredict /etc/blkid.tab
-
- [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
- source "${TMPENVFILE}"
- local myconf
-
- einfo "Using ${AMANDA_SERVER_TAPE} for tape server."
- myconf="${myconf} --with-tape-server=${AMANDA_SERVER_TAPE}"
- einfo "Using ${AMANDA_SERVER_TAPE_DEVICE} for tape server."
- myconf="${myconf} --with-tape-device=${AMANDA_SERVER_TAPE_DEVICE}"
- einfo "Using ${AMANDA_SERVER_INDEX} for index server."
- myconf="${myconf} --with-index-server=${AMANDA_SERVER_INDEX}"
- einfo "Using ${AMANDA_USER_NAME} for amanda user."
- myconf="${myconf} --with-user=${AMANDA_USER_NAME}"
- einfo "Using ${AMANDA_GROUP_NAME} for amanda group."
- myconf="${myconf} --with-group=${AMANDA_GROUP_NAME}"
- einfo "Using ${AMANDA_TAR} as Tar implementation."
- myconf="${myconf} --with-gnutar=${AMANDA_TAR}"
- einfo "Using ${AMANDA_TAR_LISTDIR} as tar listdir."
- myconf="${myconf} --with-gnutar-listdir=${AMANDA_TAR_LISTDIR}"
- einfo "Using ${AMANDA_CONFIG_NAME} as default config name."
- myconf="${myconf} --with-config=${AMANDA_CONFIG_NAME}"
- einfo "Using ${AMANDA_TMPDIR} as Amanda temporary directory."
- myconf="${myconf} --with-tmpdir=${AMANDA_TMPDIR}"
-
- if [ -n "${AMANDA_PORTS_UDP}" ] && [ -n "${AMANDA_PORTS_TCP}" ] && [ -z "${AMANDA_PORTS_BOTH}" ] ; then
- eerror "If you want _both_ UDP and TCP ports, please use only the"
- eerror "AMANDA_PORTS environment variable for identical ports, or set"
- eerror "AMANDA_PORTS_BOTH."
- die "Bad port setup!"
- fi
- if [ -n "${AMANDA_PORTS_UDP}" ]; then
- einfo "Using UDP ports ${AMANDA_PORTS_UDP/,/-}"
- myconf="${myconf} --with-udpportrange=${AMANDA_PORTS_UDP}"
- fi
- if [ -n "${AMANDA_PORTS_TCP}" ]; then
- einfo "Using TCP ports ${AMANDA_PORTS_TCP/,/-}"
- myconf="${myconf} --with-tcpportrange=${AMANDA_PORTS_TCP}"
- fi
- if [ -n "${AMANDA_PORTS}" ]; then
- einfo "Using ports ${AMANDA_PORTS/,/-}"
- myconf="${myconf} --with-portrange=${AMANDA_PORTS}"
- fi
-
- # Extras
- # Speed option
- myconf="${myconf} --with-buffered-dump"
- # "debugging" in the configuration is NOT debug in the conventional sense.
- # It is actually just useful output in the application, and should remain
- # enabled. There are some cases of breakage with MTX tape changers as of
- # 2.5.1p2 that it exposes when turned off as well.
- myconf="${myconf} --with-debugging"
- # Where to put our files
- myconf="${myconf} --localstatedir=${AMANDA_USER_HOMEDIR}"
-
- # Samba support
- myconf="${myconf} $(use_with samba smbclient /usr/bin/smbclient)"
-
- # Support for BSD, SSH, BSDUDP, BSDTCP security methods all compiled in by
- # default
- myconf="${myconf} --with-bsd-security"
- myconf="${myconf} --with-ssh-security"
- myconf="${myconf} --with-bsdudp-security"
- myconf="${myconf} --with-bsdtcp-security"
-
- # kerberos-security mechanism version 5
- myconf="${myconf} $(use_with kerberos krb5-security)"
-
- # Amazon S3 support
- myconf="${myconf} `use_enable s3 s3-device`"
-
- # libcurl is required for S3 but otherwise optional
- if ! use s3; then
- myconf="${myconf} $(use_with curl libcurl)"
- fi
-
- # Client only, as requested in bug #127725
- if use minimal ; then
- myconf="${myconf} --without-server"
- else
- # amplot
- myconf="${myconf} $(use_with gnuplot)"
- fi
-
- # IPv6 fun.
- myconf="${myconf} `use_with ipv6`"
- # This is to prevent the IPv6-is-working test
- # As the test fails on binpkg build hosts with no IPv6.
- use ipv6 && export amanda_cv_working_ipv6=yes
-
- # I18N
- myconf="${myconf} `use_enable nls`"
-
- # Bug #296634: Perl location
- perl_set_version
- myconf="${myconf} --with-amperldir=${VENDOR_LIB}"
-
- # Bug 296633: --disable-syntax-checks
- # Some tests are not safe for production systems
- myconf="${myconf} --disable-syntax-checks"
-
- # build manpages
- myconf="${myconf} --enable-manpage-build"
-
- # Bug #636262
- myconf="${myconf} $(use_with ndmp ndmp)"
-
- # bug #483120
- tc-export AR
-
- econf \
- $(use_with readline) \
- ${myconf}
-}
-
-src_compile() {
- # Again, do not want the perl-module src_compile
- default_src_compile
-}
-
-src_install() {
- [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
- source ${TMPENVFILE}
-
- einfo "Doing stock install"
- emake DESTDIR="${D}" install
-
- # Build the envdir file
- # Don't forget this..
- einfo "Building environment file"
- (
- echo "# These settings are what was present in the environment when this"
- echo "# Amanda was compiled. Changing anything below this comment will"
- echo "# have no effect on your application, but it merely exists to"
- echo "# preserve them for your next emerge of Amanda"
- cat "${TMPENVFILE}" | sed "s,=\$,='',g"
- ) >> "${MYFILESDIR}/${ENVDFILE}"
-
- # Env.d
- einfo "Installing environment config file"
- doenvd "${MYFILESDIR}/${ENVDFILE}"
-
- einfo "Installing systemd service and socket files for Amanda"
- systemd_dounit "${FILESDIR}"/amanda.socket
- systemd_newunit "${FILESDIR}"/amanda.service 'amanda@.service'
-
- # Lock down next section (up until docs).
- insopts -m0640
- # Installing Amanda Xinetd Services Definition
- einfo "Installing xinetd service file"
- insinto /etc/xinetd.d
- if use minimal ; then
- newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-client amanda
- else
- newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-server amanda
- fi
-
- if ! use minimal; then
- einfo "Installing Sample Daily Cron Job for Amanda"
- insinto /etc/cron.daily
- newins "${MYFILESDIR}/amanda-cron" amanda
- fi
-
- insinto /etc/amanda
- einfo "Installing .amandahosts File for ${AMANDA_USER_NAME} user"
- doins "${T}/amandahosts"
- fperms 600 /etc/amanda/amandahosts
-
- dosym /etc/amanda/amandahosts "${AMANDA_USER_HOMEDIR}/.amandahosts"
- insinto "${AMANDA_USER_HOMEDIR}"
- einfo "Installing .profile for ${AMANDA_USER_NAME} user"
- newins "${MYFILESDIR}/amanda-profile" .profile
-
- insinto /etc/amanda
- doins "${S}/example/amanda-client.conf"
- if ! use minimal ; then
- insinto "/etc/amanda/${AMANDA_CONFIG_NAME}"
- doins "${S}/example/amanda.conf"
- doins "${S}/example/disklist"
- keepdir "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}/index"
- fi
-
- keepdir "${AMANDA_TAR_LISTDIR}"
- keepdir "${AMANDA_USER_HOMEDIR}/amanda"
- keepdir "${AMANDA_TMPDIR}/dumps"
- # Just make sure it exists for XFS to work...
- use xfs && keepdir /var/xfsdump/inventory
-
- local i
- for i in "${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \
- "${AMANDA_TMPDIR}" /etc/amanda; do
- einfo "Securing directory (${i})"
- fowners -R ${AMANDA_USER_NAME}:${AMANDA_GROUP_NAME} ${i}
- done
- # Do NOT use -R
- fperms 0700 \
- "${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \
- "${AMANDA_TMPDIR}" "${AMANDA_TMPDIR}/dumps" \
- "${AMANDA_USER_HOMEDIR}/amanda" \
- /etc/amanda
-
- if ! use minimal ; then
- fperms 0700 \
- "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}" \
- /etc/amanda/${AMANDA_CONFIG_NAME}
- fi
-
- einfo "Setting setuid permissions"
- amanda_permissions_fix "${D}"
-
- # Relax permissions again
- insopts -m0644
-
- # docs
- einfo "Installing documentation"
- dodoc AUTHORS ChangeLog DEVELOPING NEWS README ReleaseNotes UPGRADING
- # our inetd sample
- einfo "Installing standard inetd sample"
- newdoc "${MYFILESDIR}/amanda-inetd.amanda.sample-2.6.0_p2-r2" amanda-inetd.amanda.sample
- # Amanda example configs
- einfo "Installing example configurations"
- rm "${D}"/usr/share/amanda/{COPYRIGHT,ChangeLog,NEWS,ReleaseNotes} || die
- mv "${D}/usr/share/amanda/example" "${D}/usr/share/doc/${PF}/" || die
- docinto example1
- newdoc "${FILESDIR}/example_amanda.conf" amanda.conf
- newdoc "${FILESDIR}/example_disklist-2.5.1_p3-r1" disklist
- newdoc "${FILESDIR}/example_global.conf" global.conf
-
- einfo "Cleaning up dud .la files"
- perl_set_version
- find "${D}"/"${VENDOR_LIB}" -name '*.la' -delete || die
-}
-
-pkg_postinst() {
- [ ! -f "${TMPENVFILE}" -a "$MERGE_TYPE" == "binary" ] && \
- TMPENVFILE="${ROOT}${ENVDIR}/${ENVDFILE}"
- [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!"
- source "${TMPENVFILE}"
-
- # Migration of amandates from /etc to $localstatedir/amanda
- if [ -f "${ROOT}/etc/amandates" -a \
- ! -f "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" ]; then
- einfo "Migrating amandates from /etc/ to ${AMANDA_USER_HOMEDIR}/amanda"
- einfo "A backup is also placed at /etc/amandates.orig"
- cp -dp "${ROOT}/etc/amandates" "${ROOT}/etc/amandates.orig" || die
- mkdir -p "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/" || die
- cp -dp "${ROOT}/etc/amandates" "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" || die
- fi
- if [ -f "${ROOT}/etc/amandates" ]; then
- einfo "If you have migrated safely, please delete /etc/amandates"
- fi
-
- einfo "Checking setuid permissions"
- amanda_permissions_fix "${ROOT}"
-
- elog "You should configure Amanda in /etc/amanda now."
- elog
- elog "If you use xinetd, Don't forget to check /etc/xinetd.d/amanda"
- elog "and restart xinetd afterwards!"
- elog
- elog "Otherwise, please look at /usr/share/doc/${PF}/inetd.amanda.sample"
- elog "as an example of how to configure your inetd."
- elog
- elog "systemd-users: enable and start amanda.socket or the relevant services"
- elog "regarding what auth method you use."
- elog
- elog "NOTICE: If you need raw access to partitions you need to add the"
- elog "amanda user to the 'disk' group."
- elog
- elog "NOTICE: If you have a tape changer, you need to add the amanda user"
- elog "to the 'tape' group."
- elog
- elog "If you use localhost in your disklist your restores may break."
- elog "You should replace it with the actual hostname!"
- elog "Please also see the syntax changes to amandahosts."
- elog "The only exception is when you use the authentication method 'local'."
- elog
- elog "Please note that this package no longer explicitly depends on"
- elog "virtual/inetd, as it supports modes where an inetd is not needed"
- elog "(see bug #506028 for details)."
-}
-
-# We have had reports of amanda file permissions getting screwed up.
-# Losing setuid, becoming too lax etc.
-# ONLY root and users in the amanda group should be able to run these binaries!
-amanda_permissions_fix() {
- local root="$1"
- [ -z "${root}" ] && die "Failed to pass root argument to amanda_permissions_fix!"
- local le="/usr/libexec/amanda"
- local i
- for i in /usr/sbin/amcheck "${le}"/calcsize "${le}"/killpgrp \
- "${le}"/rundump "${le}"/runtar "${le}"/dumper \
- "${le}"/planner ; do
- [ -e "${root}"/${i} ] || continue
- chown root:${AMANDA_GROUP_NAME} "${root}"/${i} || die
- chmod u=srwx,g=rx,o= "${root}"/${i} || die
- done
-
- # amanda-security.conf is a config file with similar requirements:
- # writable only by root
- # world-readable
- # 3.3.9: introduced in /etc/amanda-security.conf
- # 3.4.2: moved to /etc/amanda/amanda-security.conf
- f=/etc/amanda/amanda-security.conf
- chown root:root "${root}""${f}" || die
- chmod u=rw,go=r "${root}""${f}" || die
-}
-
-# We do not want the perl-module tests.
-src_test() {
- default_src_test
-}