diff options
Diffstat (limited to 'net-misc')
| -rw-r--r-- | net-misc/asterisk/files/1.6.2/asterisk.logrotate3 | 25 | ||||
| -rw-r--r-- | net-misc/asterisk/files/1.6.2/call_data.txt | 32 | ||||
| -rw-r--r-- | net-misc/asterisk/files/1.6.2/find_call_ids.sh | 17 | ||||
| -rw-r--r-- | net-misc/asterisk/files/1.6.2/find_call_sip_trace.sh | 21 | ||||
| -rw-r--r-- | net-misc/asterisk/files/1.6.2/sip_calc_auth | 25 | ||||
| -rw-r--r-- | net-misc/asterisk/files/1.8.0/asterisk.confd | 94 | ||||
| -rw-r--r-- | net-misc/asterisk/files/1.8.0/asterisk.initd7 | 346 | ||||
| -rw-r--r-- | net-misc/asterisk/files/1.8.0/asterisk.initd8 | 361 | ||||
| -rw-r--r-- | net-misc/asterisk/files/1.8.0/find_call_ids.sh | 68 | ||||
| -rw-r--r-- | net-misc/asterisk/files/1.8.0/find_call_sip_trace.sh | 76 |
10 files changed, 0 insertions, 1065 deletions
diff --git a/net-misc/asterisk/files/1.6.2/asterisk.logrotate3 b/net-misc/asterisk/files/1.6.2/asterisk.logrotate3 deleted file mode 100644 index 69296c99e66d..000000000000 --- a/net-misc/asterisk/files/1.6.2/asterisk.logrotate3 +++ /dev/null @@ -1,25 +0,0 @@ -/var/log/asterisk/messages /var/log/asterisk/queue_log { - missingok - notifempty - - postrotate - /usr/sbin/asterisk -rnx "logger reload" || /bin/true - endscript -} - -/var/log/asterisk/debug /var/log/asterisk/full { - missingok - notifempty - daily - - postrotate - /usr/sbin/asterisk -rnx "logger reload" || /bin/true - endscript -} - -/var/log/asterisk/cdr-csv/*.csv /var/log/asterisk/cdr-custom/*.csv { - missingok - notifempty - weekly - rotate 52 -} diff --git a/net-misc/asterisk/files/1.6.2/call_data.txt b/net-misc/asterisk/files/1.6.2/call_data.txt deleted file mode 100644 index ba9cbbba98b5..000000000000 --- a/net-misc/asterisk/files/1.6.2/call_data.txt +++ /dev/null @@ -1,32 +0,0 @@ -It's sometimes useful to look at SIP conversations in retrospect. If you have -a troublesome system, enable sip debug (in the CLI: sip set debug on), set up -logger.conf to log it to some file and then you can use the two scripts here to -extract the SIP converssations as seen by asterisk. - -find_call_ids.sh: - -This script will locate Call-ID values given an A and B number. Just invoke it with: - -find_call_ids.sh /path/to/log A-num B-num - -eg: - -find_call_ids.sh /var/log/asterisk/debug 102 105 - -To find the Call-IDs for calls going from ext 102 to ext 105 (depends on your -exact setup and the actual values being passed in the SIP INVITE packets) - -find_call_sip_trace.sh - -This script will extract a SIP conversation from the log for one or more -Call-ID values. Invoke with: - -find_call_sip_trace.sh /path/to/log Call-ID [...] - -Eg: - -find_call_sip_trace.sh /var/log/asterisk/debug 12341665haf434qgrq3@192.168.0.5 123123@192.168.0.3 - -This will find the SIP packets for those two conversations from the log -(interleaving the packets in the order asterisk output them - useful for -analysing the two SIP legs of the same call). diff --git a/net-misc/asterisk/files/1.6.2/find_call_ids.sh b/net-misc/asterisk/files/1.6.2/find_call_ids.sh deleted file mode 100644 index c4689bd1579d..000000000000 --- a/net-misc/asterisk/files/1.6.2/find_call_ids.sh +++ /dev/null @@ -1,17 +0,0 @@ -#! /bin/bash - -logfile=$1 -anum=$2 -bnum=$3 - -function usage() -{ - echo "USAGE: $1 logfile anum bnum" - exit -1 -} - -[ -r "${logfile}" ] || usage $0 -[ -n "${anum}" ] || usage $0 -[ -n "${bnum}" ] || usage $0 - -grep -B2 -P '^INVITE sip:'"${bnum}"'@.*\n(([^F].*|F[^r].*|Fr[^o].*|Fro[^m].*|From[^:]|From:.*<sip:'"${anum}"'@.*>.*)\r\n)+\r\n' "${logfile}" | awk '$4 ~ "^VERBOSE" { dt=$1" "$2" "$3 } $1=="Call-ID:" { if (cid != $2) { cid=$2; print dt" "cid; }}' diff --git a/net-misc/asterisk/files/1.6.2/find_call_sip_trace.sh b/net-misc/asterisk/files/1.6.2/find_call_sip_trace.sh deleted file mode 100644 index 5b2e69e517b4..000000000000 --- a/net-misc/asterisk/files/1.6.2/find_call_sip_trace.sh +++ /dev/null @@ -1,21 +0,0 @@ -#! /bin/bash - -logfile=$1 -callid=$2 - -function usage() -{ - echo "USAGE: $1 logfile Call-ID [Call-ID ...]" - exit -1 -} - -[ -r "${logfile}" ] || usage $0 -[ -n "${callid}" ] || usage $0 - -shift; shift; -while [ $# -gt 0 ]; do - callid="${callid}|$1" - shift -done - -dos2unix < "${logfile}" | grep -P '^.*\n<--- (SIP read|(Reliably )?(Ret|T)ransmitting) .*\n([^<\n].*\n)*Call-ID: ('"${callid//./\\.}"')\n((|[^<\n].*)\n)*<-+>$|^.* chan_sip.c: (Reliably )?(Ret|T)ransmitting .*\n([^-\n].*\n)*Call-ID: ('"${callid//./\\.}"')\n((|[^-\n].*)\n)*---$' diff --git a/net-misc/asterisk/files/1.6.2/sip_calc_auth b/net-misc/asterisk/files/1.6.2/sip_calc_auth deleted file mode 100644 index 3f050ada5738..000000000000 --- a/net-misc/asterisk/files/1.6.2/sip_calc_auth +++ /dev/null @@ -1,25 +0,0 @@ -#! /bin/bash - -[ $# -lt 7 ] && echo "USAGE: $0 username realm password method uri algorithm nonce" && exit 1 - -un=$1 -realm=$2 -pw=$3 -method=$4 -uri=$5 -alg=$6 -nonce=$7 - -echo "Using $un@$realm (secret $pw) for method $method to $uri with nonce $nonce (alg=$alg)" - -a1=$un:$realm:$pw -a2=$method:$uri -ha1=$(echo -n "$a1" | openssl $alg) -ha2=$(echo -n "$a2" | openssl $alg) -resp=$(echo -n "$ha1:$nonce:$ha2" | openssl $alg) - -echo "a1=$a1" -echo "a2=$a2" -echo "ha1=$ha1" -echo "ha2=$ha2" -echo "resp=$resp" diff --git a/net-misc/asterisk/files/1.8.0/asterisk.confd b/net-misc/asterisk/files/1.8.0/asterisk.confd deleted file mode 100644 index f826d46f245c..000000000000 --- a/net-misc/asterisk/files/1.8.0/asterisk.confd +++ /dev/null @@ -1,94 +0,0 @@ -# Copyright 1999-2011 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -# -# Additional options for asterisk -# -# see "asterisk -h" for a list of options -# -ASTERISK_OPTS="" - -# -# User and group to run asterisk as -# -# Value: double-colon separated list of user and group, or empty to run as root: -# -# -# "asterisk:asterisk" to run as user "asterisk" and group "asterisk" -# -# "asterisk" to run as user "asterisk" and all groups that user "asterisk" is a member of -# -# ":asterisk" to run as user "root" and group "asterisk" -# -# "" to run as user "root" and group "root" -# -ASTERISK_USER="asterisk" - -# -# Nicelevel -# -# Set the priority of the asterisk process -# -# Value: (highest) -20..19 (lowest) -# -#ASTERISK_NICE="19" - -# Send crash notifications emails to this address -# (needs a working mail service and /usr/sbin/sendmail to do so (e.g. ssmtp)) -# -# Value: Email address or empty to disable -# -#ASTERISK_NOTIFY_EMAIL="root" - -# -# Send asterisk's output to this terminal -# -# Value: Full path to device node or a number -# -#ASTERISK_TTY="/dev/tty9" - -# -# Start an asterisk console on the terminal specified by ASTERISK_TTY -# -# Warning! Use only for debugging, this is a potential security issue! -# -# Value: yes or no/empty -# -ASTERISK_CONSOLE="no" - -# -# Maximum size of core files. -# -# Value: Size in bytes, unlimited for no limit or empty to disable. -# -ASTERISK_CORE_SIZE="unlimited" - -# -# ASTERISK_CORE_DIR -# -# Value: Directory (will be created if non-existant), default is /tmp -# -ASTERISK_CORE_DIR="/var/lib/asterisk/coredump" - -# -# Max number of filedescriptors -# -# Value: Number of descriptors -# -ASTERISK_MAX_FD="4096" - -# -# Delay time before restarting asterisk after a crash. -# -# Value: Number of seconds to sleep after a crash before restarting. -# -ASTERISK_RESTART_DELAY=5 - -# -# Kill these tasks after asterisk crashed -# -# Warning! This will kill _ALL_ tasks with the specified names! -# -# Value: Space separated list of names in double quotes (e.g. "mpg123 mad") -# -#ASTERISK_CLEANUP_ON_CRASH="mpg123 asterisk-mpg123 mad" diff --git a/net-misc/asterisk/files/1.8.0/asterisk.initd7 b/net-misc/asterisk/files/1.8.0/asterisk.initd7 deleted file mode 100644 index 0897919caac5..000000000000 --- a/net-misc/asterisk/files/1.8.0/asterisk.initd7 +++ /dev/null @@ -1,346 +0,0 @@ -#!/sbin/openrc-run -# Copyright 1999-2013 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -extra_started_commands="forcestop reload" - -depend() { - need net - use nscd dns dahdi mysql postgresql slapd capi -} - -is_running() { - [ -r "${ast_rundir}/asterisk.pid" ] || return 1 - PID="$(cat "${ast_rundir}/asterisk.pid")" - [ -d "/proc/${PID}" ] || return 1 - EXE="$(readlink -f /proc/${PID}/exe)" - EXE="${EXE% (deleted)}" # in case asterisk got upgraded and we're still looking at an old one. - [ "${EXE}" = /usr/sbin/asterisk ] || return 1 # pid got re-used for another process. - - # PID reported in pidfile is active, and is still an asterisk instance. - return 0 -} - -# Sets up a few variables for us for use -# ast_instancename: eg, asterisk when RC_SVCNAME=asterisk, or asterisk(foo) when asterisk.foo. -# ast_rundir: directory to be used as run folder (pid and ctl files). -# ast_spooldir: -setup_svc_variables() -{ - local t - - ast_instancename=asterisk - ast_rundir=/var/run/${RC_SVCNAME} - ast_logdir=/var/log/${RC_SVCNAME} - ast_spooldir=/var/spool/${RC_SVCNAME} - ast_confdir=/etc/${RC_SVCNAME/.//} - - if [ "${RC_SVCNAME}" != "asterisk" ]; then - t="${RC_SVCNAME#asterisk.}" - if [ "${RC_SVCNAME}" = "${t}" ]; then - eerror "Invalid SVCNAME of ${RC_SVCNAME}, must be of the format asterisk.name." - return 1 - fi - ast_instancename+="(${t})" - fi - - [ -n "${ASTERISK_RUNDIR}" ] && ast_rundir="${ASTERISK_RUNDIR}" - [ -n "${ASTERISK_LOGDIR}" ] && ast_logdir="${ASTERISK_LOGDIR}" - [ -n "${ASTERISK_SPOOLDIR}" ] && ast_spooldir="${ASTERISK_SPOOLDIR}" - [ -n "${ASTERISK_CONFDIR}" ] && ast_confdir="${ASTERISK_CONFDIR}" - - return 0 -} - -asterisk_run_loop() { - local result=0 signal=0 - - echo "Initializing ${ast_instancename} wrapper" - OPTS="$*" - - trap "rm -f '${ast_rundir}/wrapper_loop.running'" EXIT - touch "${ast_rundir}/wrapper_loop.running" - - while [ -r "${ast_rundir}/wrapper_loop.running" ]; do - if [ -n "${TTY}" ]; then - /usr/bin/stty -F "${TTY}" sane - ${NICE} /usr/sbin/asterisk -C "${ast_confdir}/asterisk.conf" ${OPTS} >"${TTY}" 2>&1 <"${TTY}" - result=$? - else - ${NICE} /usr/sbin/asterisk -C "${ast_confdir}/asterisk.conf" ${OPTS} 2>&1 >/dev/null - result=$? - fi - - if [ "$result" -eq 0 ]; then - echo "Asterisk terminated normally" - break - else - if [ "$result" -gt 128 ]; then - signal="$(expr "$result" - 128)" - MSG="Asterisk terminated with Signal: $signal" - - CORE_TARGET="core-$(date "+%Y%m%d-%H%M%S")" - - local CORE_DUMPED=0 - if [ -f "${ASTERISK_CORE_DIR}/core" ]; then - mv "${ASTERISK_CORE_DIR}/core" \ - "${ASTERISK_CORE_DIR}/${CORE_TARGET}" - CORE_DUMPED=1 - - elif [ -f "${ASTERISK_CORE_DIR}/core.${PID}" ]; then - mv "${ASTERISK_CORE_DIR}/core.${PID}" \ - "${ASTERISK_CORE_DIR}/${CORE_TARGET}" - CORE_DUMPED=1 - - fi - - [ $CORE_DUMPED -eq 1 ] && \ - MSG="${MSG}\n\rCore dumped: ${ASTERISK_CORE_DIR}/${CORE_TARGET}" - else - MSG="Asterisk terminated with return code: $result" - fi - - # kill left-over tasks - for X in ${ASTERISK_CLEANUP_ON_CRASH}; do - kill -9 "$(pidof "${X}")"; - done - fi - - [ -n "${TTY}" ] \ - && echo "${MSG}" >"${TTY}" \ - || echo "${MSG}" - - - if [ -n "${ASTERISK_NOTIFY_EMAIL}" ] && \ - [ -x /usr/sbin/sendmail ]; then - echo -e -n "Subject: Asterisk crashed\r\n${MSG}\r\n" |\ - /usr/sbin/sendmail "${ASTERISK_NOTIFY_EMAIL}" - fi - sleep "${ASTERISK_RESTART_DELAY}" - echo "Restarting Asterisk..." - done - - echo "Terminating wrapper loop." - return 0 -} - -start() { - local OPTS USER GROUP PID - local tmp x - - local OPTS ARGS - - setup_svc_variables || return $? - - ebegin "Starting ${ast_instancename} PBX" - - eindent - - # filter (redundant) arguments - OPTS="$(echo "${ASTERISK_OPTS}" | sed -re "s:-[cfF]::g")" - - # default options - OPTS="${OPTS} -f" # don't fork / detach breaks wrapper script... - - # mangle yes/no options - ASTERISK_CONSOLE="$(echo ${ASTERISK_CONSOLE} | tr '[:lower:]' '[:upper:]')" - ASTERISK_WAITBOOTED="$(echo "${ASTERISK_WAITBOOTED}" | tr '[:lower:]' '[:upper:]')" - - ASTERISK_RESTART_DELAY="$(echo "${ASTERISK_RESTART_DELAY}" | sed -re 's/^([0-9]*).*/\1/')" - [ -z "${ASTERISK_RESTART_DELAY}" ] && ASTERISK_RESTART_DELAY=5 - - if [ -n "${ASTERISK_CORE_SIZE}" ] && - [ "${ASTERISK_CORE_SIZE}" != "0" ]; then - ulimit -c ${ASTERISK_CORE_SIZE} - - if [ -n "${ASTERISK_CORE_DIR}" ] && \ - [ ! -d "${ASTERISK_CORE_DIR}" ] - then - mkdir -m750 -p "${ASTERISK_CORE_DIR}" - - if [ -n "${ASTERISK_USER}" ]; then - chown -R "${ASTERISK_USER}" "${ASTERISK_CORE_DIR}" - fi - fi - ASTERISK_CORE_DIR="${ASTERISK_CORE_DIR:-/tmp}" - - cd "${ASTERISK_CORE_DIR}" - einfo "Core dump size : ${ASTERISK_CORE_SIZE}" - einfo "Core dump location : ${ASTERISK_CORE_DIR}" - - OPTS="${OPTS} -g" - fi - - if [ -n "${ASTERISK_MAX_FD}" ]; then - ulimit -n ${ASTERISK_MAX_FD} - einfo "Max open filedescriptors : ${ASTERISK_MAX_FD}" - fi - - if [ -n "${ASTERISK_NICE}" ]; then - if [ ${ASTERISK_NICE} -ge -20 ] && \ - [ ${ASTERISK_NICE} -le 19 ]; then - einfo "Nice level : ${ASTERISK_NICE}" - NICE="nice -n ${ASTERISK_NICE} --" - else - eerror "Nice value must be between -20 and 19" - return 1 - fi - else - NICE="" - fi - - if [ -n "${ASTERISK_NOTIFY_EMAIL}" ]; then - if [ -x /usr/sbin/sendmail ]; then - einfo "Email notifications go to : ${ASTERISK_NOTIFY_EMAIL}" - else - ewarn "Notifications disabled, /usr/sbin/sendmail doesn't exist or is not executable!" - unset ASTERISK_NOTIFY_EMAIL - fi - fi - - if [ -n "${ASTERISK_TTY}" ]; then - for x in ${ASTERISK_TTY} \ - /dev/tty${ASTERISK_TTY} \ - /dev/vc/${ASTERISK_TTY} - do - if [ -c "${x}" ]; then - TTY="${x}" - fi - done - [ -n "${TTY}" ] && \ - einfo "Messages are sent to : ${TTY}" - fi - - if [ "${ASTERISK_CONSOLE}" = "YES" ] && [ -n "${TTY}" ]; then - einfo "Starting Asterisk console : ${ASTERISK_CONSOLE}" - OPTS="${OPTS} -c" - fi - - if [ -n "${ASTERISK_USER}" ]; then - USER="$(echo $ASTERISK_USER | sed 's/:.*//')" - GROUP="$(echo $ASTERISK_USER | awk -F: '/.*:.*/ { print $2 }')" - if [ -n "${USER}" ]; then - if ! getent passwd "${USER}" &>/dev/null; then - eerror "Requested to run asterisk as ${USER}, which doesn't exist." - return 1 - fi - OPTS="${OPTS} -U ${USER}" - fi - if [ -n "${GROUP}" ]; then - if ! getent group "${GROUP}" &>/dev/null; then - eerror "Requested to run asterisk with group ${USER}, which doesn't exist." - return 1 - fi - OPTS="${OPTS} -G ${GROUP}" - GROUP=":${GROUP}" # make it look nice... - fi - checkpath -d -m 0755 -o ${USER}${GROUP} "${ast_logdir}" "${ast_rundir}" "${ast_spooldir}" - find "${ast_logdir}" "${ast_rundir}" "${ast_spooldir}" ! -user "${USER}" | while read element; do - ewarn "${USER} is not the owner of $element, or permissions are insufficient, fixing." - chown ${USER} "${element}" - chmod u+rX "${element}" - done; - einfo "Starting asterisk as : ${USER}${GROUP}" - else - checkpath -d -m 0755 -o root:root "${ast_logdir}" "${ast_rundir}" - ewarn "Starting asterisk as root is not recommended." - fi - - asterisk_run_loop ${OPTS} 2>&1 | logger -t "wrapper:${ast_instancename}" & - result=$? - - if [ $result -eq 0 ]; then - # 2 seconds should be enough for asterisk to start - sleep 2 - is_running - result=$? - - [ $result -eq 0 ] || wrapperstop - fi - - eoutdent - eend $result - - if [ $result -eq 0 -a "${ASTERISK_WAITBOOTED}" = "YES" ]; then - ebegin "Waiting for ${ast_instancename} to fully boot" - /usr/sbin/asterisk -C "${ast_confdir}/asterisk.conf" -r -x "core waitfullybooted" &>/dev/null - eend $? - fi - - return $result -} - -wrapperstop() { - # Accomodate system upgrades (so a previous version of the wrapper script that still uses a pid file may be running). - if [ -r "${ast_rundir}/wrapper_loop.pid" ]; then - ebegin "Killing wrapper script" - kill "$(cat /var/run/asterisk/wrapper_loop.pid)" - eend $? - fi - - # The new one (due to "hardened" requirements) uses a simpler - # flag to indicate running or shutting down. - if [ -r "${ast_rundir}/wrapper_loop.running" ]; then - ebegin "Signalling wrapper script to terminate" - rm "${ast_rundir}/wrapper_loop.running" - eend $? - fi - - return 0 -} - -forcestop() { - setup_svc_variables || return $? - - # Just to be sure - when we want to forcestop we should make it all tear down. - wrapperstop - - ebegin "Stopping asterisk PBX" - start-stop-daemon --stop --pidfile /var/run/asterisk/asterisk.pid - eend $? -} - -stop() { - setup_svc_variables || return $? - - wrapperstop - - if ! is_running; then - eerror "Asterisk is not running!" - return 0 - fi - - ebegin "Stopping asterisk PBX gracefully" - /usr/sbin/asterisk -C "${ast_confdir}/asterisk.conf" -r -x "core stop gracefully" &>/dev/null - # Now we have to wait until asterisk has _really_ stopped. - sleep 1 - if is_running; then - einfon "Waiting for asterisk to shutdown ." - local cnt=0 - while is_running; do - cnt="$(expr $cnt + 1)" - if [ $cnt -gt 60 ] ; then - # Waited 120 seconds now. Fail. - echo - eend 1 "Failed." - return - fi - sleep 2 - echo -n "." - done - echo - fi - eend 0 -} - -reload() { - setup_svc_variables || return $? - - if is_running; then - ebegin "Forcing asterisk to reload configuration" - /usr/sbin/asterisk -C "${ast_confdir}/asterisk.conf" -r -x "module reload" &>/dev/null - eend $? - else - eerror "Asterisk is not running!" - fi -} diff --git a/net-misc/asterisk/files/1.8.0/asterisk.initd8 b/net-misc/asterisk/files/1.8.0/asterisk.initd8 deleted file mode 100644 index 4419dda06883..000000000000 --- a/net-misc/asterisk/files/1.8.0/asterisk.initd8 +++ /dev/null @@ -1,361 +0,0 @@ -#!/sbin/openrc-run -# Copyright 1999-2016 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -extra_started_commands="forcestop reload" -extra_commands="checkperms" - -depend() { - need net - use nscd dns dahdi mysql postgresql slapd capi -} - -is_running() { - [ -r "${ast_rundir}/asterisk.pid" ] || return 1 - PID="$(cat "${ast_rundir}/asterisk.pid")" - [ -d "/proc/${PID}" ] || return 1 - EXE="$(readlink -f /proc/${PID}/exe)" - EXE="${EXE% (deleted)}" # in case asterisk got upgraded and we're still looking at an old one. - [ "${EXE}" = /usr/sbin/asterisk ] || return 1 # pid got re-used for another process. - - # PID reported in pidfile is active, and is still an asterisk instance. - return 0 -} - -# Sets up a few variables for us for use -# ast_instancename: eg, asterisk when RC_SVCNAME=asterisk, or asterisk(foo) when asterisk.foo. -# ast_rundir: directory to be used as run folder (pid and ctl files). -# ast_spooldir: -setup_svc_variables() -{ - local t - - ast_instancename=asterisk - ast_rundir=/var/run/${RC_SVCNAME} - ast_logdir=/var/log/${RC_SVCNAME} - ast_spooldir=/var/spool/${RC_SVCNAME} - ast_confdir=/etc/${RC_SVCNAME/.//} - - if [ "${RC_SVCNAME}" != "asterisk" ]; then - t="${RC_SVCNAME#asterisk.}" - if [ "${RC_SVCNAME}" = "${t}" ]; then - eerror "Invalid SVCNAME of ${RC_SVCNAME}, must be of the format asterisk.name." - return 1 - fi - ast_instancename+="(${t})" - fi - - [ -n "${ASTERISK_RUNDIR}" ] && ast_rundir="${ASTERISK_RUNDIR}" - [ -n "${ASTERISK_LOGDIR}" ] && ast_logdir="${ASTERISK_LOGDIR}" - [ -n "${ASTERISK_SPOOLDIR}" ] && ast_spooldir="${ASTERISK_SPOOLDIR}" - [ -n "${ASTERISK_CONFDIR}" ] && ast_confdir="${ASTERISK_CONFDIR}" - - if [ -n "${ASTERISK_USER}" ]; then - ast_user="${ASTERISK_USER%%:*}" - ast_group="${ASTERISK_USER#*:}" - ast_group="${ast_group%%:*}" - [ -z "${ast_user}" ] && ast_user=root - [ -z "${ast_group}" ] && ast_group="$(getent group $(getent passwd "${ast_user}" | awk -F: '{ print $4 }') | sed -re 's/:.*//')" - fi - - [ -z "${ast_user}" ] && ast_user=root - [ -z "${ast_group}" ] && ast_group=root - - return 0 -} - -checkperms() { - setup_svc_variables - - local path - checkpath -d -m 0755 -o ${ast_user}:${ast_group} "${ast_logdir}" "${ast_rundir}" "${ast_spooldir}" - for path in "${ast_rundir}" "${ast_spooldir}" "${ast_logdir}"; do - ebegin "Checking ${path}" - find "${path}" ! -user "${ast_user}" | while read element; do - [[ "${element}" = *.gz ]] && continue # Skip logrotated files. - ewarn "${ast_user} is not the owner of ${element}, or permissions are insufficient, fixing." - chown ${ast_user} "${element}" - chmod u+rwX "${element}" - done; - eend 0 - done -} - -asterisk_run_loop() { - local result=0 signal=0 - - echo "Initializing ${ast_instancename} wrapper" - OPTS="$*" - - trap "rm -f '${ast_rundir}/wrapper_loop.running'" EXIT - touch "${ast_rundir}/wrapper_loop.running" - - while [ -r "${ast_rundir}/wrapper_loop.running" ]; do - if [ -n "${TTY}" ]; then - /usr/bin/stty -F "${TTY}" sane - ${NICE} /usr/sbin/asterisk -C "${ast_confdir}/asterisk.conf" ${OPTS} >"${TTY}" 2>&1 <"${TTY}" - result=$? - else - ${NICE} /usr/sbin/asterisk -C "${ast_confdir}/asterisk.conf" ${OPTS} 2>&1 >/dev/null - result=$? - fi - - if [ "$result" -eq 0 ]; then - echo "Asterisk terminated normally" - break - else - if [ "$result" -gt 128 ]; then - signal="$(expr "$result" - 128)" - MSG="Asterisk terminated with Signal: $signal" - - CORE_TARGET="core-$(date "+%Y%m%d-%H%M%S")" - - local CORE_DUMPED=0 - if [ -f "${ASTERISK_CORE_DIR}/core" ]; then - mv "${ASTERISK_CORE_DIR}/core" \ - "${ASTERISK_CORE_DIR}/${CORE_TARGET}" - CORE_DUMPED=1 - - elif [ -f "${ASTERISK_CORE_DIR}/core.${PID}" ]; then - mv "${ASTERISK_CORE_DIR}/core.${PID}" \ - "${ASTERISK_CORE_DIR}/${CORE_TARGET}" - CORE_DUMPED=1 - - fi - - [ $CORE_DUMPED -eq 1 ] && \ - MSG="${MSG}\n\rCore dumped: ${ASTERISK_CORE_DIR}/${CORE_TARGET}" - else - MSG="Asterisk terminated with return code: $result" - fi - - # kill left-over tasks - for X in ${ASTERISK_CLEANUP_ON_CRASH}; do - kill -9 "$(pidof "${X}")"; - done - fi - - [ -n "${TTY}" ] \ - && echo "${MSG}" >"${TTY}" \ - || echo "${MSG}" - - - if [ -n "${ASTERISK_NOTIFY_EMAIL}" ] && \ - [ -x /usr/sbin/sendmail ]; then - echo -e -n "Subject: Asterisk crashed\r\n${MSG}\r\n" |\ - /usr/sbin/sendmail "${ASTERISK_NOTIFY_EMAIL}" - fi - sleep "${ASTERISK_RESTART_DELAY}" - echo "Restarting Asterisk..." - done - - echo "Terminating wrapper loop." - return 0 -} - -start() { - local OPTS PID - local tmp x - - local OPTS ARGS - - setup_svc_variables || return $? - - ebegin "Starting ${ast_instancename} PBX" - - eindent - - # filter (redundant) arguments - OPTS="$(echo "${ASTERISK_OPTS}" | sed -re "s:-[cfF]::g")" - - # default options - OPTS="${OPTS} -f" # don't fork / detach breaks wrapper script... - - # mangle yes/no options - ASTERISK_CONSOLE="$(echo ${ASTERISK_CONSOLE} | tr '[:lower:]' '[:upper:]')" - ASTERISK_WAITBOOTED="$(echo "${ASTERISK_WAITBOOTED}" | tr '[:lower:]' '[:upper:]')" - - ASTERISK_RESTART_DELAY="$(echo "${ASTERISK_RESTART_DELAY}" | sed -re 's/^([0-9]*).*/\1/')" - [ -z "${ASTERISK_RESTART_DELAY}" ] && ASTERISK_RESTART_DELAY=5 - - if [ -n "${ASTERISK_CORE_SIZE}" ] && - [ "${ASTERISK_CORE_SIZE}" != "0" ]; then - ulimit -c ${ASTERISK_CORE_SIZE} - - if [ -n "${ASTERISK_CORE_DIR}" ] && \ - [ ! -d "${ASTERISK_CORE_DIR}" ] - then - checkpath -d -m 0755 -o ${ast_user}:${ast_group} "${ASTERISK_CORE_DIR}" - fi - ASTERISK_CORE_DIR="${ASTERISK_CORE_DIR:-/tmp}" - - cd "${ASTERISK_CORE_DIR}" - einfo "Core dump size : ${ASTERISK_CORE_SIZE}" - einfo "Core dump location : ${ASTERISK_CORE_DIR}" - - OPTS="${OPTS} -g" - fi - - if [ -n "${ASTERISK_MAX_FD}" ]; then - ulimit -n ${ASTERISK_MAX_FD} - einfo "Max open filedescriptors : ${ASTERISK_MAX_FD}" - fi - - if [ -n "${ASTERISK_NICE}" ]; then - if [ ${ASTERISK_NICE} -ge -20 ] && \ - [ ${ASTERISK_NICE} -le 19 ]; then - einfo "Nice level : ${ASTERISK_NICE}" - NICE="nice -n ${ASTERISK_NICE} --" - else - eerror "Nice value must be between -20 and 19" - return 1 - fi - else - NICE="" - fi - - if [ -n "${ASTERISK_NOTIFY_EMAIL}" ]; then - if [ -x /usr/sbin/sendmail ]; then - einfo "Email notifications go to : ${ASTERISK_NOTIFY_EMAIL}" - else - ewarn "Notifications disabled, /usr/sbin/sendmail doesn't exist or is not executable!" - unset ASTERISK_NOTIFY_EMAIL - fi - fi - - if [ -n "${ASTERISK_TTY}" ]; then - for x in ${ASTERISK_TTY} \ - /dev/tty${ASTERISK_TTY} \ - /dev/vc/${ASTERISK_TTY} - do - if [ -c "${x}" ]; then - TTY="${x}" - fi - done - [ -n "${TTY}" ] && \ - einfo "Messages are sent to : ${TTY}" - fi - - if [ "${ASTERISK_CONSOLE}" = "YES" ] && [ -n "${TTY}" ]; then - einfo "Starting Asterisk console : ${ASTERISK_CONSOLE}" - OPTS="${OPTS} -c" - fi - - if ! getent passwd "${ast_user}" &>/dev/null; then - eerror "Requested to run asterisk as ${ast_user}, which doesn't exist." - return 1 - fi - OPTS="${OPTS} -U ${ast_user}" - - if ! getent group "${ast_group}" &>/dev/null; then - eerror "Requested to run asterisk with group ${ast_group}, which doesn't exist." - return 1 - fi - OPTS="${OPTS} -G ${ast_group}" - - if [ "${ast_user}" = root ]; then - ewarn "Starting asterisk as root is not recommended (SERIOUS SECURITY CONSIDERATIONS)." - elif [ "${ast_group}" = root ]; then - ewarn "Starting asterisk with group root is not recommended (SERIOUS SECURITY CONSIDERATIONS)." - fi - - checkpath -d -m 0755 -o "${ast_user}:${ast_group}" "${ast_logdir}" "${ast_rundir}" - einfo "Starting asterisk as : ${ast_user}:${ast_group}" - asterisk_run_loop ${OPTS} 2>&1 | logger -t "wrapper:${ast_instancename}" & - result=$? - - if [ $result -eq 0 ]; then - # 2 seconds should be enough for asterisk to start - sleep 2 - is_running - result=$? - - [ $result -eq 0 ] || wrapperstop - fi - - eoutdent - eend $result - - if [ $result -eq 0 -a "${ASTERISK_WAITBOOTED}" = "YES" ]; then - ebegin "Waiting for ${ast_instancename} to fully boot" - /usr/sbin/asterisk -C "${ast_confdir}/asterisk.conf" -r -x "core waitfullybooted" &>/dev/null - eend $? - fi - - return $result -} - -wrapperstop() { - # Accomodate system upgrades (so a previous version of the wrapper script that still uses a pid file may be running). - if [ -r "${ast_rundir}/wrapper_loop.pid" ]; then - ebegin "Killing wrapper script" - kill "$(cat /var/run/asterisk/wrapper_loop.pid)" - eend $? - fi - - # The new one (due to "hardened" requirements) uses a simpler - # flag to indicate running or shutting down. - if [ -r "${ast_rundir}/wrapper_loop.running" ]; then - ebegin "Signalling wrapper script to terminate" - rm "${ast_rundir}/wrapper_loop.running" - eend $? - fi - - return 0 -} - -forcestop() { - setup_svc_variables || return $? - - # Just to be sure - when we want to forcestop we should make it all tear down. - wrapperstop - - ebegin "Stopping asterisk PBX" - start-stop-daemon --stop --pidfile /var/run/asterisk/asterisk.pid - eend $? -} - -stop() { - setup_svc_variables || return $? - - wrapperstop - - if ! is_running; then - eerror "Asterisk is not running!" - return 0 - fi - - ebegin "Stopping asterisk PBX gracefully" - /usr/sbin/asterisk -C "${ast_confdir}/asterisk.conf" -r -x "core stop gracefully" &>/dev/null - # Now we have to wait until asterisk has _really_ stopped. - sleep 1 - if is_running; then - einfon "Waiting for asterisk to shutdown ." - local cnt=0 - while is_running; do - cnt="$(expr $cnt + 1)" - if [ $cnt -gt 60 ] ; then - # Waited 120 seconds now. Fail. - echo - eend 1 "Failed." - return - fi - sleep 2 - echo -n "." - done - echo - fi - eend 0 -} - -reload() { - setup_svc_variables || return $? - - if is_running; then - ebegin "Forcing asterisk to reload configuration" - /usr/sbin/asterisk -C "${ast_confdir}/asterisk.conf" -r -x "module reload" &>/dev/null - eend $? - else - eerror "Asterisk is not running!" - fi -} diff --git a/net-misc/asterisk/files/1.8.0/find_call_ids.sh b/net-misc/asterisk/files/1.8.0/find_call_ids.sh deleted file mode 100644 index 321f3dacd624..000000000000 --- a/net-misc/asterisk/files/1.8.0/find_call_ids.sh +++ /dev/null @@ -1,68 +0,0 @@ -#! /bin/bash - -logfile=$1 -anum=$2 -bnum=$3 - -function usage() -{ - echo "USAGE: $1 logfile anum bnum" - exit -1 -} - -[ -r "${logfile}" ] || usage $0 -[ -n "${anum}" ] || usage $0 -[ -n "${bnum}" ] || usage $0 - -#echo "Finding calls from '${anum}' to '${bnum}' in ${logfile}." - -# modes: -# 0 - not processing an INVITE. -# 1 - processing an INVITE. -# 2 - from matched (processing). -dos2unix < "${logfile}" | awk ' - BEGIN { mode = 0 } - mode==0 && $4~"^VERBOSE" { - dt=$1" "$2" "$3 - } - - mode==0 && $1=="INVITE" && $2 ~ "^sip:'"${bnum}"'@" { - #print - - mode=1 - - split($2, a, "[:@]") - bnum=a[2] - } - - mode==1 && $1=="From:" { - #print - if ($3 ~ "^<sip:'"${anum}"'@.*>") { - mode=2 - split($3, a, "[:@]") - anum=a[2] - } else { - #print "From does not match ... leaving block." - mode = 0 - } - } - - mode!=0 && $1=="Call-ID:" { - callid=$2 - - if (NF!=2) { - print "WTF @ Call-ID header having NF!=2" - } - } - - mode==1 && $0=="" { - #print "Leaving block (no match)" - mode = 0 - } - - mode==2 && $0=="" { - #print "Leaving block (match)" - print dt " " anum " " bnum " " callid - mode = 0 - } -' diff --git a/net-misc/asterisk/files/1.8.0/find_call_sip_trace.sh b/net-misc/asterisk/files/1.8.0/find_call_sip_trace.sh deleted file mode 100644 index 06ae824def5c..000000000000 --- a/net-misc/asterisk/files/1.8.0/find_call_sip_trace.sh +++ /dev/null @@ -1,76 +0,0 @@ -#! /bin/bash - -logfile=$1 -callid=$2 - -function usage() -{ - echo "USAGE: $1 logfile Call-ID [Call-ID ...]" - exit -1 -} - -[ -r "${logfile}" ] || usage $0 -[ -n "${callid}" ] || usage $0 - -shift; shift; -while [ $# -gt 0 ]; do - callid="${callid}|$1" - shift -done - -# modes: -# 0 - searching for SIP start block ... -# 1 - transmit of sorts -# 2 - receive - -dos2unix < "${logfile}" | awk ' - BEGIN { mode = 0 } - mode==0 && $4~"^VERBOSE" { - dt=$1" "$2" "$3 - } - - mode!=0 && $1 == "Call-ID:" { - #print - - if ($2 ~ /('"${callid}"')/) { - callidmatch=1 - } else { - #print $2" does not match ^('"${callid}"')$" - mode=0 - } - } - - (mode==1 && $0=="---") || (mode==2 && $0=="<------------->") { - if (callidmatch) { - print dt" "sipmode"\n"pckt"---" - } - - mode=0 - } - - mode!=0 { - pckt = pckt $0 "\n" - } - - mode==0 && $0 ~ "chan_sip[.]c: .*[tT]ransmitting" { - #print - - if ($6 == "Retransmitting") { - sipmode = $6" "$7" to "$NF - } else { - sipmode = "Transmitting to "$NF - } - - mode=1 - pckt="" - callidmatch=0 - } - - mode==0 && $0 ~ "SIP read from" { - #print - mode=2 - pckt="" - callidmatch=0 - sipmode="Received from "$5":" - } -' |