3 files changed, 72 insertions, 0 deletions
diff --git a/sys-devel/distcc/files/3.2/conf b/sys-devel/distcc/files/3.2/conf
new file mode 100644
index 000000000000..c499271685e9
--- /dev/null
+++ b/sys-devel/distcc/files/3.2/conf
@@ -0,0 +1,40 @@
+# /etc/conf.d/distccd: config file for /etc/init.d/distccd
+
+DISTCCD_OPTS=""
+
+# this is the distccd executable 
+DISTCCD_EXEC="/usr/bin/distccd"
+
+# this is where distccd will store its pid file
+DISTCCD_PIDFILE="/var/run/distccd/distccd.pid"
+
+# set this option to run distccd with extra parameters
+# Default port is 3632.  For most people the default is okay.
+DISTCCD_OPTS="${DISTCCD_OPTS} --port 3632"
+
+# Logging
+# You can change some logging options here:
+# --log-file FILE
+# --log-level LEVEL  [critical,error,warning, notice, info, debug]
+#
+# Leaving --log-file blank will log to syslog
+# example: --log-file /dev/null --log-level warning
+# example: --log-level critical
+
+DISTCCD_OPTS="${DISTCCD_OPTS} --log-level critical"
+
+# SECURITY NOTICE:
+# It is HIGHLY recommended that you use the --listen option
+# for increased security. You can specify an IP to permit connections 
+# from or a CIDR mask
+# --listen accepts only a single IP
+# --allow is now mandatory as of distcc-2.18.
+# example:  --allow 192.168.0.0/24
+# example:  --allow 192.168.0.5 --allow 192.168.0.150
+# example:  --listen 192.168.0.2
+DISTCCD_OPTS="${DISTCCD_OPTS} --allow 192.168.0.0/24"
+#DISTCCD_OPTS="${DISTCCD_OPTS} --listen 192.168.0.2"
+
+# set this for niceness
+# Default is 15
+DISTCCD_OPTS="${DISTCCD_OPTS} -N 15"
diff --git a/sys-devel/distcc/files/distcc-config-3.2_rc1 b/sys-devel/distcc/files/3.2/distcc-config
index 6f3bd27e40f0..6f3bd27e40f0 100644
--- a/sys-devel/distcc/files/distcc-config-3.2_rc1
+++ b/sys-devel/distcc/files/3.2/distcc-config
diff --git a/sys-devel/distcc/files/3.2/init b/sys-devel/distcc/files/3.2/init
new file mode 100644
index 000000000000..f7009f6e3101
--- /dev/null
+++ b/sys-devel/distcc/files/3.2/init
@@ -0,0 +1,32 @@
+#!/sbin/runscript
+# Copyright 1999-2011 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+depend() {
+	need net
+	use avahi-daemon ypbind
+}
+
+start() {
+	ebegin "Starting distccd"
+
+	if [ ! -e /var/run/distccd ] ; then
+		mkdir -p /var/run/distccd
+		chown distcc:daemon /var/run/distccd
+	fi
+
+	# Load PATH and GCC_SPECS from gcc-config, bug #262773
+	eval "$(gcc-config -E)"
+
+	start-stop-daemon --start --quiet --exec "${DISTCCD_EXEC}" --user distcc -- \
+		--daemon --pid-file "${DISTCCD_PIDFILE}" \
+		${DISTCCD_OPTS}
+	eend $?
+}
+
+stop() {
+	ebegin "Stopping distccd"
+	start-stop-daemon --stop --quiet --pidfile "${DISTCCD_PIDFILE}"
+	eend $?
+}