From f44a1236fac5a45cb21d26e5e31583cc5bdd1ed8 Mon Sep 17 00:00:00 2001 From: Michael Orlitzky Date: Mon, 11 Jul 2016 10:37:48 -0400 Subject: dev-lang/php: new revisions fixing opcache installation location logic. We install the opcache extension with a call to dolib.so, which requires an earlier call to "into" to set its installation location. If the user enables any SAPIs other than apache2, that happens incidentally. However, if only the apache2 SAPI is enabled, the installation location is never set, ultimately causing the extension to fail to load. This is fixed by adding a call to "into" directly before the dolib.so call. Two calls to use_if_iuse were also replaced with the simpler "use". Gentoo-Bug: 550676 Package-Manager: portage-2.2.28 --- dev-lang/php/php-5.6.23-r1.ebuild | 814 ------------------------------------- dev-lang/php/php-5.6.23-r2.ebuild | 815 ++++++++++++++++++++++++++++++++++++++ dev-lang/php/php-7.0.8-r1.ebuild | 809 +++++++++++++++++++++++++++++++++++++ dev-lang/php/php-7.0.8.ebuild | 808 ------------------------------------- 4 files changed, 1624 insertions(+), 1622 deletions(-) delete mode 100644 dev-lang/php/php-5.6.23-r1.ebuild create mode 100644 dev-lang/php/php-5.6.23-r2.ebuild create mode 100644 dev-lang/php/php-7.0.8-r1.ebuild delete mode 100644 dev-lang/php/php-7.0.8.ebuild (limited to 'dev-lang/php') diff --git a/dev-lang/php/php-5.6.23-r1.ebuild b/dev-lang/php/php-5.6.23-r1.ebuild deleted file mode 100644 index 0696638dbbe6..000000000000 --- a/dev-lang/php/php-5.6.23-r1.ebuild +++ /dev/null @@ -1,814 +0,0 @@ -# Copyright 1999-2016 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -EAPI=5 - -inherit eutils autotools flag-o-matic versionator depend.apache apache-module libtool systemd - -KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd ~x86-freebsd ~amd64-linux ~ia64-linux ~x86-linux ~ppc-macos ~x64-macos ~x86-macos" - -function php_get_uri () -{ - case "${1}" in - "php-pre") - echo "http://downloads.php.net/dsp/${2}" - ;; - "php") - echo "http://www.php.net/distributions/${2}" - ;; - "olemarkus") - echo "https://dev.gentoo.org/~olemarkus/php/${2}" - ;; - "gentoo") - echo "mirror://gentoo/${2}" - ;; - *) - die "unhandled case in php_get_uri" - ;; - esac -} - -PHP_MV="$(get_major_version)" -SLOT="$(get_version_component_range 1-2)" - -# alias, so we can handle different types of releases (finals, rcs, alphas, -# betas, ...) w/o changing the whole ebuild -PHP_PV="${PV/_rc/RC}" -PHP_PV="${PHP_PV/_alpha/alpha}" -PHP_PV="${PHP_PV/_beta/beta}" -PHP_RELEASE="php" -[[ ${PV} == ${PV/_alpha/} ]] || PHP_RELEASE="php-pre" -[[ ${PV} == ${PV/_beta/} ]] || PHP_RELEASE="php-pre" -[[ ${PV} == ${PV/_rc/} ]] || PHP_RELEASE="php-pre" -PHP_P="${PN}-${PHP_PV}" - -PHP_SRC_URI="$(php_get_uri "${PHP_RELEASE}" "${PHP_P}.tar.bz2")" - -PHP_FPM_CONF_VER="1" - -SRC_URI="${PHP_SRC_URI}" - -DESCRIPTION="The PHP language runtime engine" -HOMEPAGE="http://php.net/" -LICENSE="PHP-3" - -S="${WORKDIR}/${PHP_P}" - -# We can build the following SAPIs in the given order -SAPIS="embed cli cgi fpm apache2" - -# SAPIs and SAPI-specific USE flags (cli SAPI is default on): -IUSE="${IUSE} - ${SAPIS/cli/+cli} - threads" - -IUSE="${IUSE} bcmath berkdb bzip2 calendar cdb cjk - crypt +ctype curl debug - enchant exif frontbase +fileinfo +filter firebird - flatfile ftp gd gdbm gmp +hash +iconv imap inifile - intl iodbc ipv6 +json kerberos ldap ldap-sasl libedit libressl - mhash mssql mysql libmysqlclient mysqli nls - oci8-instant-client odbc +opcache pcntl pdo +phar +posix postgres qdbm - readline recode selinux +session sharedmem - +simplexml snmp soap sockets spell sqlite ssl - sybase-ct sysvipc systemd tidy +tokenizer truetype unicode vpx wddx - +xml xmlreader xmlwriter xmlrpc xpm xslt zip zlib" - -DEPEND=" - >=app-eselect/eselect-php-0.9.1[apache2?,fpm?] - >=dev-libs/libpcre-8.32[unicode] - apache2? ( || ( >=www-servers/apache-2.4[apache2_modules_unixd,threads=] - > \ - "${D}/${PHP_EXT_INI_DIR}"/opcache.ini - dosym "${PHP_EXT_INI_DIR#${EPREFIX}}/opcache.ini" \ - "${PHP_EXT_INI_DIR_ACTIVE#${EPREFIX}}/opcache.ini" - fi - - # SAPI-specific handling - if [[ "${sapi}" == "fpm" ]] ; then - einfo "Installing FPM config file php-fpm.conf" - insinto "${PHP_INI_DIR#${EPREFIX}}" - doins sapi/fpm/php-fpm.conf - fi - - dodoc php.ini-development - dodoc php.ini-production -} - -php_set_ini_dir() { - PHP_INI_DIR="${EPREFIX}/etc/php/${1}-php${SLOT}" - PHP_EXT_INI_DIR="${PHP_INI_DIR}/ext" - PHP_EXT_INI_DIR_ACTIVE="${PHP_INI_DIR}/ext-active" -} - -src_prepare() { - # Change PHP branding - # Get the alpha/beta/rc version - sed -re "s|^(PHP_EXTRA_VERSION=\").*(\")|\1-pl${PR/r/}-gentoo\2|g" \ - -i configure.in || die "Unable to change PHP branding" - - # Patch PHP to show Gentoo as the server platform - sed -e 's/PHP_UNAME=`uname -a | xargs`/PHP_UNAME=`uname -s -n -r -v | xargs`/g' \ - -i configure.in || die "Failed to fix server platform name" - - # Prevent PHP from activating the Apache config, - # as we will do that ourselves - sed -i \ - -e "s,-i -a -n php${PHP_MV},-i -n php${PHP_MV},g" \ - -e "s,-i -A -n php${PHP_MV},-i -n php${PHP_MV},g" \ - configure sapi/apache2filter/config.m4 sapi/apache2handler/config.m4 \ - || die - - # Patch PHP to support heimdal instead of mit-krb5 - if has_version "app-crypt/heimdal" ; then - sed -e 's|gssapi_krb5|gssapi|g' -i acinclude.m4 \ - || die "Failed to fix heimdal libname" - sed -e 's|PHP_ADD_LIBRARY(k5crypto, 1, $1)||g' -i acinclude.m4 \ - || die "Failed to fix heimdal crypt library reference" - fi - - # Add user patches #357637 - epatch_user - - # Force rebuilding aclocal.m4 - rm -f aclocal.m4 || die - eautoreconf - - if [[ ${CHOST} == *-darwin* ]] ; then - # http://bugs.php.net/bug.php?id=48795, bug #343481 - sed -i -e '/BUILD_CGI="\\$(CC)/s/CC/CXX/' configure || die - fi -} - -src_configure() { - addpredict /usr/share/snmp/mibs/.index - addpredict /var/lib/net-snmp/mib_indexes - - PHP_DESTDIR="${EPREFIX}/usr/$(get_libdir)/php${SLOT}" - - # The php-fpm config file wants localstatedir to be ${EPREFIX}/var - # and not the Gentoo default ${EPREFIX}/var/lib. See bug 572002. - local our_conf=( - --prefix="${PHP_DESTDIR}" - --mandir="${PHP_DESTDIR}/man" - --infodir="${PHP_DESTDIR}/info" - --libdir="${PHP_DESTDIR}/lib" - --with-libdir="$(get_libdir)" - --localstatedir="${EPREFIX}/var" - --without-pear - $(use_enable threads maintainer-zts) - ) - - our_conf+=( - $(use_enable bcmath bcmath) - $(use_with bzip2 bz2 "${EPREFIX}/usr") - $(use_enable calendar calendar) - $(use_enable ctype ctype) - $(use_with curl curl "${EPREFIX}/usr") - $(use_enable xml dom) - $(use_with enchant enchant "${EPREFIX}/usr") - $(use_enable exif exif) - $(use_enable fileinfo fileinfo) - $(use_enable filter filter) - $(use_enable ftp ftp) - $(use_with nls gettext "${EPREFIX}/usr") - $(use_with gmp gmp "${EPREFIX}/usr") - $(use_enable hash hash) - $(use_with mhash mhash "${EPREFIX}/usr") - $(use_with iconv iconv \ - $(use elibc_glibc || use elibc_musl || echo "${EPREFIX}/usr")) - $(use_enable intl intl) - $(use_enable ipv6 ipv6) - $(use_enable json json) - $(use_with kerberos kerberos "${EPREFIX}/usr") - $(use_enable xml libxml) - $(use_with xml libxml-dir "${EPREFIX}/usr") - $(use_enable unicode mbstring) - $(use_with crypt mcrypt "${EPREFIX}/usr") - $(use_with mssql mssql "${EPREFIX}/usr") - $(use_with unicode onig "${EPREFIX}/usr") - $(use_with ssl openssl "${EPREFIX}/usr") - $(use_with ssl openssl-dir "${EPREFIX}/usr") - $(use_enable pcntl pcntl) - $(use_enable phar phar) - $(use_enable pdo pdo) - $(use_enable opcache opcache) - $(use_with postgres pgsql "${EPREFIX}/usr") - $(use_enable posix posix) - $(use_with spell pspell "${EPREFIX}/usr") - $(use_with recode recode "${EPREFIX}/usr") - $(use_enable simplexml simplexml) - $(use_enable sharedmem shmop) - $(use_with snmp snmp "${EPREFIX}/usr") - $(use_enable soap soap) - $(use_enable sockets sockets) - $(use_with sqlite sqlite3 "${EPREFIX}/usr") - $(use_with sybase-ct sybase-ct "${EPREFIX}/usr") - $(use_enable sysvipc sysvmsg) - $(use_enable sysvipc sysvsem) - $(use_enable sysvipc sysvshm) - $(use_with systemd fpm-systemd) - $(use_with tidy tidy "${EPREFIX}/usr") - $(use_enable tokenizer tokenizer) - $(use_enable wddx wddx) - $(use_enable xml xml) - $(use_enable xmlreader xmlreader) - $(use_enable xmlwriter xmlwriter) - $(use_with xmlrpc xmlrpc) - $(use_with xslt xsl "${EPREFIX}/usr") - $(use_enable zip zip) - $(use_with zlib zlib "${EPREFIX}/usr") - $(use_enable debug debug) - ) - - # DBA support - if use cdb || use berkdb || use flatfile || use gdbm || use inifile \ - || use qdbm ; then - our_conf+=( "--enable-dba${shared}" ) - fi - - # DBA drivers support - our_conf+=( - $(use_with cdb cdb) - $(use_with berkdb db4 "${EPREFIX}/usr") - $(use_enable flatfile flatfile) - $(use_with gdbm gdbm "${EPREFIX}/usr") - $(use_enable inifile inifile) - $(use_with qdbm qdbm "${EPREFIX}/usr") - ) - - # Support for the GD graphics library - our_conf+=( - $(use_with truetype freetype-dir "${EPREFIX}/usr") - $(use_with truetype t1lib "${EPREFIX}/usr") - $(use_enable cjk gd-jis-conv) - $(use_with gd jpeg-dir "${EPREFIX}/usr") - $(use_with gd png-dir "${EPREFIX}/usr") - $(use_with xpm xpm-dir "${EPREFIX}/usr") - $(use_with vpx vpx-dir "${EPREFIX}/usr") - ) - # enable gd last, so configure can pick up the previous settings - our_conf+=( $(use_with gd gd) ) - - # IMAP support - if use imap ; then - our_conf+=( - $(use_with imap imap "${EPREFIX}/usr") - $(use_with ssl imap-ssl "${EPREFIX}/usr") - ) - fi - - # Interbase/firebird support - our_conf+=( $(use_with firebird interbase "${EPREFIX}/usr") ) - - # LDAP support - if use ldap ; then - our_conf+=( - $(use_with ldap ldap "${EPREFIX}/usr") - $(use_with ldap-sasl ldap-sasl "${EPREFIX}/usr") - ) - fi - - # MySQL support - local mysqllib="mysqlnd" - local mysqlilib="mysqlnd" - use libmysqlclient && mysqllib="${EPREFIX}/usr" - use libmysqlclient && mysqlilib="${EPREFIX}/usr/bin/mysql_config" - - our_conf+=( $(use_with mysql mysql "${mysqllib}") ) - our_conf+=( $(use_with mysqli mysqli "${mysqlilib}") ) - - local mysqlsock="${EPREFIX}/var/run/mysqld/mysqld.sock" - if use mysql || use mysqli ; then - our_conf+=( $(use_with mysql mysql-sock "${mysqlsock}") ) - fi - - # ODBC support - our_conf+=( - $(use_with odbc unixODBC "${EPREFIX}/usr") - $(use_with iodbc iodbc "${EPREFIX}/usr") - ) - - # Oracle support - our_conf+=( $(use_with oci8-instant-client oci8) ) - - # PDO support - if use pdo ; then - our_conf+=( - $(use_with mssql pdo-dblib) - $(use_with mysql pdo-mysql "${mysqllib}") - $(use_with postgres pdo-pgsql) - $(use_with sqlite pdo-sqlite "${EPREFIX}/usr") - $(use_with firebird pdo-firebird "${EPREFIX}/usr") - $(use_with odbc pdo-odbc "unixODBC,${EPREFIX}/usr") - $(use_with oci8-instant-client pdo-oci) - ) - fi - - # readline/libedit support - our_conf+=( - $(use_with readline readline "${EPREFIX}/usr") - $(use_with libedit libedit "${EPREFIX}/usr") - ) - - # Session support - if use session ; then - our_conf+=( $(use_with sharedmem mm "${EPREFIX}/usr") ) - else - our_conf+=( $(use_enable session session) ) - fi - - # Use pic for shared modules such as apache2's mod_php - our_conf+=( --with-pic ) - - # we use the system copy of pcre - # --with-pcre-regex affects ext/pcre - # --with-pcre-dir affects ext/filter and ext/zip - our_conf+=( - --with-pcre-regex="${EPREFIX}/usr" - --with-pcre-dir="${EPREFIX}/usr" - ) - - # Catch CFLAGS problems - # Fixes bug #14067. - # Changed order to run it in reverse for bug #32022 and #12021. - replace-cpu-flags "k6*" "i586" - - # Support user-passed configuration parameters - our_conf+=( ${EXTRA_ECONF:-} ) - - # Support the Apache2 extras, they must be set globally for all - # SAPIs to work correctly, especially for external PHP extensions - - mkdir -p "${WORKDIR}/sapis-build" || die - for one_sapi in $SAPIS ; do - use "${one_sapi}" || continue - php_set_ini_dir "${one_sapi}" - - # The BUILD_DIR variable is used to determine where to output - # the files that autotools creates. This was all originally - # based on the autotools-utils eclass. - BUILD_DIR="${WORKDIR}/sapis-build/${one_sapi}" - cp -r "${S}" "${BUILD_DIR}" || die - cd "${BUILD_DIR}" || die - - local sapi_conf=( - --with-config-file-path="${PHP_INI_DIR}" - --with-config-file-scan-dir="${PHP_EXT_INI_DIR_ACTIVE}" - ) - - for sapi in $SAPIS ; do - case "$sapi" in - cli|cgi|embed|fpm) - if [[ "${one_sapi}" == "${sapi}" ]] ; then - sapi_conf+=( "--enable-${sapi}" ) - else - sapi_conf+=( "--disable-${sapi}" ) - fi - ;; - - apache2) - if [[ "${one_sapi}" == "${sapi}" ]] ; then - sapi_conf+=( --with-apxs2="${EPREFIX}/usr/sbin/apxs" ) - else - sapi_conf+=( --without-apxs2 ) - fi - ;; - esac - done - - # Construct the $myeconfargs array by concatenating $our_conf - # (the common args) and $sapi_conf (the SAPI-specific args). - local myeconfargs=( "${our_conf[@]}" ) - myeconfargs+=( "${sapi_conf[@]}" ) - - pushd "${BUILD_DIR}" > /dev/null || die - econf "${myeconfargs[@]}" - popd > /dev/null || die - done -} - -src_compile() { - # snmp seems to run during src_compile, too (bug #324739) - addpredict /usr/share/snmp/mibs/.index - addpredict /var/lib/net-snmp/mib_indexes - - for sapi in ${SAPIS} ; do - if use "${sapi}"; then - cd "${WORKDIR}/sapis-build/$sapi" || \ - die "Failed to change dir to ${WORKDIR}/sapis-build/$1" - emake - fi - done -} - -src_install() { - # see bug #324739 for what happens when we don't have that - addpredict /usr/share/snmp/mibs/.index - - # grab the first SAPI that got built and install common files from there - local first_sapi="" - for sapi in $SAPIS ; do - if use $sapi ; then - first_sapi=$sapi - break - fi - done - - # Makefile forgets to create this before trying to write to it... - dodir "${PHP_DESTDIR#${EPREFIX}}/bin" - - # Install php environment (without any sapis) - cd "${WORKDIR}/sapis-build/$first_sapi" || die - emake INSTALL_ROOT="${D}" \ - install-build install-headers install-programs - - local extension_dir="$("${ED}/${PHP_DESTDIR#${EPREFIX}}/bin/php-config" --extension-dir)" - - # Create the directory where we'll put version-specific php scripts - keepdir "/usr/share/php${PHP_MV}" - - local sapi="", file="" - local sapi_list="" - - for sapi in ${SAPIS}; do - if use "${sapi}" ; then - einfo "Installing SAPI: ${sapi}" - cd "${WORKDIR}/sapis-build/${sapi}" || die - - if [[ "${sapi}" == "apache2" ]] ; then - # We're specifically not using emake install-sapi as libtool - # may cause unnecessary relink failures (see bug #351266) - insinto "${PHP_DESTDIR#${EPREFIX}}/apache2/" - newins ".libs/libphp5$(get_libname)" \ - "libphp${PHP_MV}$(get_libname)" - keepdir "/usr/$(get_libdir)/apache2/modules" - else - # needed each time, php_install_ini would reset it - local dest="${PHP_DESTDIR#${EPREFIX}}" - into "${dest}" - case "$sapi" in - cli) - source="sapi/cli/php" - ;; - cgi) - source="sapi/cgi/php-cgi" - ;; - fpm) - source="sapi/fpm/php-fpm" - ;; - embed) - source="libs/libphp${PHP_MV}$(get_libname)" - ;; - *) - die "unhandled sapi in src_install" - ;; - esac - - if [[ "${source}" == *"$(get_libname)" ]]; then - dolib.so "${source}" - else - dobin "${source}" - local name="$(basename ${source})" - dosym "${dest}/bin/${name}" "/usr/bin/${name}${SLOT}" - fi - fi - - php_install_ini "${sapi}" - - # construct correct SAPI string for php-config - # thanks to ferringb for the bash voodoo - if [[ "${sapi}" == "apache2" ]]; then - sapi_list="${sapi_list:+${sapi_list} }apache2handler" - else - sapi_list="${sapi_list:+${sapi_list} }${sapi}" - fi - fi - done - - # Installing opcache module - if use_if_iuse opcache ; then - dolib.so "modules/opcache$(get_libname)" - fi - - # Install env.d files - newenvd "${FILESDIR}/20php5-envd" "20php${SLOT}" - sed -e "s|/lib/|/$(get_libdir)/|g" -i "${ED}/etc/env.d/20php${SLOT}" || die - sed -e "s|php5|php${SLOT}|g" -i "${ED}/etc/env.d/20php${SLOT}" || die - - # set php-config variable correctly (bug #278439) - sed -e "s:^\(php_sapis=\)\".*\"$:\1\"${sapi_list}\":" -i \ - "${ED}/usr/$(get_libdir)/php${SLOT}/bin/php-config" || die - - if use fpm ; then - if use systemd; then - systemd_newunit "${FILESDIR}/php-fpm_at.service" \ - "php-fpm@${SLOT}.service" - else - systemd_newunit "${FILESDIR}/php-fpm_at-simple.service" \ - "php-fpm@${SLOT}.service" - fi - fi -} - -src_test() { - echo ">>> Test phase [test]: ${CATEGORY}/${PF}" - PHP_BIN="${WORKDIR}/sapis-build/cli/sapi/cli/php" - if [[ ! -x "${PHP_BIN}" ]] ; then - ewarn "Test phase requires USE=cli, skipping" - return - else - export TEST_PHP_EXECUTABLE="${PHP_BIN}" - fi - - if [[ -x "${WORKDIR}/sapis/cgi/php-cgi" ]] ; then - export TEST_PHP_CGI_EXECUTABLE="${WORKDIR}/sapis/cgi/php-cgi" - fi - - REPORT_EXIT_STATUS=1 "${TEST_PHP_EXECUTABLE}" -n -d \ - "session.save_path=${T}" \ - "${WORKDIR}/sapis-build/cli/run-tests.php" -n -q -d \ - "session.save_path=${T}" - - for name in ${EXPECTED_TEST_FAILURES}; do - mv "${name}.out" "${name}.out.orig" 2>/dev/null || die - done - - local failed="$(find -name '*.out')" - if [[ ${failed} != "" ]] ; then - ewarn "The following test cases failed unexpectedly:" - for name in ${failed}; do - ewarn " ${name/.out/}" - done - else - einfo "No unexpected test failures, all fine" - fi - - if [[ ${PHP_SHOW_UNEXPECTED_TEST_PASS} == "1" ]] ; then - local passed="" - for name in ${EXPECTED_TEST_FAILURES}; do - [[ -f "${name}.diff" ]] && continue - passed="${passed} ${name}" - done - if [[ ${passed} != "" ]] ; then - einfo "The following test cases passed unexpectedly:" - for name in ${passed}; do - ewarn " ${passed}" - done - else - einfo "None of the known-to-fail tests passed, all fine" - fi - fi -} - -pkg_postinst() { - # Output some general info to the user - if use apache2 ; then - APACHE2_MOD_DEFINE="PHP" - APACHE2_MOD_CONF="70_mod_php" # Provided by app-eselect/eselect-php - apache-module_pkg_postinst - fi - - # Create the symlinks for php - for m in ${SAPIS}; do - [[ ${m} == 'embed' ]] && continue; - if use $m ; then - local ci=$(eselect php show $m) - if [[ -z $ci ]]; then - eselect php set $m php${SLOT} || die - einfo "Switched ${m} to use php:${SLOT}" - einfo - elif [[ $ci != "php${SLOT}" ]] ; then - elog "To switch $m to use php:${SLOT}, run" - elog " eselect php set $m php${SLOT}" - elog - fi - fi - done - - # Remove dead symlinks for SAPIs that were just disabled. For - # example, if the user has the cgi SAPI enabled, then he has an - # eselect-php symlink for it. If he later reinstalls PHP with - # USE="-cgi", that symlink will break. This call to eselect is - # supposed to remove that dead link per bug 572436. - eselect php cleanup || die - - if ! has "php${SLOT/./-}" ${PHP_TARGETS}; then - elog "To build extensions for this version of PHP, you will need to" - elog "add php${SLOT/./-} to your PHP_TARGETS USE_EXPAND variable." - elog - fi - - # Only mention PHP_INI_VERSION if the user doesn't have it set. - case "${PHP_INI_VERSION}" in - production|development) - ;; - *) - elog "This ebuild installed a version of php.ini based on" - elog "${PHP_INI_UPSTREAM}. You can choose which version of" - elog "php.ini to install by default by setting PHP_INI_VERSION" - elog "to either 'production' or 'development' in your make.conf." - elog "Both versions of php.ini can be found with the PHP docs in" - elog "${EPREFIX}/usr/share/doc/${PF}" - elog - ;; - esac - - elog "For details on how version slotting works, please see" - elog "the wiki:" - elog - elog " https://wiki.gentoo.org/wiki/PHP" - elog -} - -pkg_postrm() { - # This serves two purposes. First, if we have just removed the last - # installed version of PHP, then this will remove any dead symlinks - # belonging to eselect-php. Second, if a user upgrades slots from - # (say) 5.6 to 7.0 and depcleans the old slot, then this will update - # his existing symlinks to point to the new 7.0 installation. The - # latter is bug 432962. - # - # Note: the eselect-php package may not be installed at this point, - # so we can't die() if this command fails. - eselect php cleanup -} diff --git a/dev-lang/php/php-5.6.23-r2.ebuild b/dev-lang/php/php-5.6.23-r2.ebuild new file mode 100644 index 000000000000..071afe4e72df --- /dev/null +++ b/dev-lang/php/php-5.6.23-r2.ebuild @@ -0,0 +1,815 @@ +# Copyright 1999-2016 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Id$ + +EAPI=5 + +inherit eutils autotools flag-o-matic versionator depend.apache apache-module libtool systemd + +KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd ~x86-freebsd ~amd64-linux ~ia64-linux ~x86-linux ~ppc-macos ~x64-macos ~x86-macos" + +function php_get_uri () +{ + case "${1}" in + "php-pre") + echo "http://downloads.php.net/dsp/${2}" + ;; + "php") + echo "http://www.php.net/distributions/${2}" + ;; + "olemarkus") + echo "https://dev.gentoo.org/~olemarkus/php/${2}" + ;; + "gentoo") + echo "mirror://gentoo/${2}" + ;; + *) + die "unhandled case in php_get_uri" + ;; + esac +} + +PHP_MV="$(get_major_version)" +SLOT="$(get_version_component_range 1-2)" + +# alias, so we can handle different types of releases (finals, rcs, alphas, +# betas, ...) w/o changing the whole ebuild +PHP_PV="${PV/_rc/RC}" +PHP_PV="${PHP_PV/_alpha/alpha}" +PHP_PV="${PHP_PV/_beta/beta}" +PHP_RELEASE="php" +[[ ${PV} == ${PV/_alpha/} ]] || PHP_RELEASE="php-pre" +[[ ${PV} == ${PV/_beta/} ]] || PHP_RELEASE="php-pre" +[[ ${PV} == ${PV/_rc/} ]] || PHP_RELEASE="php-pre" +PHP_P="${PN}-${PHP_PV}" + +PHP_SRC_URI="$(php_get_uri "${PHP_RELEASE}" "${PHP_P}.tar.bz2")" + +PHP_FPM_CONF_VER="1" + +SRC_URI="${PHP_SRC_URI}" + +DESCRIPTION="The PHP language runtime engine" +HOMEPAGE="http://php.net/" +LICENSE="PHP-3" + +S="${WORKDIR}/${PHP_P}" + +# We can build the following SAPIs in the given order +SAPIS="embed cli cgi fpm apache2" + +# SAPIs and SAPI-specific USE flags (cli SAPI is default on): +IUSE="${IUSE} + ${SAPIS/cli/+cli} + threads" + +IUSE="${IUSE} bcmath berkdb bzip2 calendar cdb cjk + crypt +ctype curl debug + enchant exif frontbase +fileinfo +filter firebird + flatfile ftp gd gdbm gmp +hash +iconv imap inifile + intl iodbc ipv6 +json kerberos ldap ldap-sasl libedit libressl + mhash mssql mysql libmysqlclient mysqli nls + oci8-instant-client odbc +opcache pcntl pdo +phar +posix postgres qdbm + readline recode selinux +session sharedmem + +simplexml snmp soap sockets spell sqlite ssl + sybase-ct sysvipc systemd tidy +tokenizer truetype unicode vpx wddx + +xml xmlreader xmlwriter xmlrpc xpm xslt zip zlib" + +DEPEND=" + >=app-eselect/eselect-php-0.9.1[apache2?,fpm?] + >=dev-libs/libpcre-8.32[unicode] + apache2? ( || ( >=www-servers/apache-2.4[apache2_modules_unixd,threads=] + > \ + "${D}/${PHP_EXT_INI_DIR}"/opcache.ini + dosym "${PHP_EXT_INI_DIR#${EPREFIX}}/opcache.ini" \ + "${PHP_EXT_INI_DIR_ACTIVE#${EPREFIX}}/opcache.ini" + fi + + # SAPI-specific handling + if [[ "${sapi}" == "fpm" ]] ; then + einfo "Installing FPM config file php-fpm.conf" + insinto "${PHP_INI_DIR#${EPREFIX}}" + doins sapi/fpm/php-fpm.conf + fi + + dodoc php.ini-development + dodoc php.ini-production +} + +php_set_ini_dir() { + PHP_INI_DIR="${EPREFIX}/etc/php/${1}-php${SLOT}" + PHP_EXT_INI_DIR="${PHP_INI_DIR}/ext" + PHP_EXT_INI_DIR_ACTIVE="${PHP_INI_DIR}/ext-active" +} + +src_prepare() { + # Change PHP branding + # Get the alpha/beta/rc version + sed -re "s|^(PHP_EXTRA_VERSION=\").*(\")|\1-pl${PR/r/}-gentoo\2|g" \ + -i configure.in || die "Unable to change PHP branding" + + # Patch PHP to show Gentoo as the server platform + sed -e 's/PHP_UNAME=`uname -a | xargs`/PHP_UNAME=`uname -s -n -r -v | xargs`/g' \ + -i configure.in || die "Failed to fix server platform name" + + # Prevent PHP from activating the Apache config, + # as we will do that ourselves + sed -i \ + -e "s,-i -a -n php${PHP_MV},-i -n php${PHP_MV},g" \ + -e "s,-i -A -n php${PHP_MV},-i -n php${PHP_MV},g" \ + configure sapi/apache2filter/config.m4 sapi/apache2handler/config.m4 \ + || die + + # Patch PHP to support heimdal instead of mit-krb5 + if has_version "app-crypt/heimdal" ; then + sed -e 's|gssapi_krb5|gssapi|g' -i acinclude.m4 \ + || die "Failed to fix heimdal libname" + sed -e 's|PHP_ADD_LIBRARY(k5crypto, 1, $1)||g' -i acinclude.m4 \ + || die "Failed to fix heimdal crypt library reference" + fi + + # Add user patches #357637 + epatch_user + + # Force rebuilding aclocal.m4 + rm -f aclocal.m4 || die + eautoreconf + + if [[ ${CHOST} == *-darwin* ]] ; then + # http://bugs.php.net/bug.php?id=48795, bug #343481 + sed -i -e '/BUILD_CGI="\\$(CC)/s/CC/CXX/' configure || die + fi +} + +src_configure() { + addpredict /usr/share/snmp/mibs/.index + addpredict /var/lib/net-snmp/mib_indexes + + PHP_DESTDIR="${EPREFIX}/usr/$(get_libdir)/php${SLOT}" + + # The php-fpm config file wants localstatedir to be ${EPREFIX}/var + # and not the Gentoo default ${EPREFIX}/var/lib. See bug 572002. + local our_conf=( + --prefix="${PHP_DESTDIR}" + --mandir="${PHP_DESTDIR}/man" + --infodir="${PHP_DESTDIR}/info" + --libdir="${PHP_DESTDIR}/lib" + --with-libdir="$(get_libdir)" + --localstatedir="${EPREFIX}/var" + --without-pear + $(use_enable threads maintainer-zts) + ) + + our_conf+=( + $(use_enable bcmath bcmath) + $(use_with bzip2 bz2 "${EPREFIX}/usr") + $(use_enable calendar calendar) + $(use_enable ctype ctype) + $(use_with curl curl "${EPREFIX}/usr") + $(use_enable xml dom) + $(use_with enchant enchant "${EPREFIX}/usr") + $(use_enable exif exif) + $(use_enable fileinfo fileinfo) + $(use_enable filter filter) + $(use_enable ftp ftp) + $(use_with nls gettext "${EPREFIX}/usr") + $(use_with gmp gmp "${EPREFIX}/usr") + $(use_enable hash hash) + $(use_with mhash mhash "${EPREFIX}/usr") + $(use_with iconv iconv \ + $(use elibc_glibc || use elibc_musl || echo "${EPREFIX}/usr")) + $(use_enable intl intl) + $(use_enable ipv6 ipv6) + $(use_enable json json) + $(use_with kerberos kerberos "${EPREFIX}/usr") + $(use_enable xml libxml) + $(use_with xml libxml-dir "${EPREFIX}/usr") + $(use_enable unicode mbstring) + $(use_with crypt mcrypt "${EPREFIX}/usr") + $(use_with mssql mssql "${EPREFIX}/usr") + $(use_with unicode onig "${EPREFIX}/usr") + $(use_with ssl openssl "${EPREFIX}/usr") + $(use_with ssl openssl-dir "${EPREFIX}/usr") + $(use_enable pcntl pcntl) + $(use_enable phar phar) + $(use_enable pdo pdo) + $(use_enable opcache opcache) + $(use_with postgres pgsql "${EPREFIX}/usr") + $(use_enable posix posix) + $(use_with spell pspell "${EPREFIX}/usr") + $(use_with recode recode "${EPREFIX}/usr") + $(use_enable simplexml simplexml) + $(use_enable sharedmem shmop) + $(use_with snmp snmp "${EPREFIX}/usr") + $(use_enable soap soap) + $(use_enable sockets sockets) + $(use_with sqlite sqlite3 "${EPREFIX}/usr") + $(use_with sybase-ct sybase-ct "${EPREFIX}/usr") + $(use_enable sysvipc sysvmsg) + $(use_enable sysvipc sysvsem) + $(use_enable sysvipc sysvshm) + $(use_with systemd fpm-systemd) + $(use_with tidy tidy "${EPREFIX}/usr") + $(use_enable tokenizer tokenizer) + $(use_enable wddx wddx) + $(use_enable xml xml) + $(use_enable xmlreader xmlreader) + $(use_enable xmlwriter xmlwriter) + $(use_with xmlrpc xmlrpc) + $(use_with xslt xsl "${EPREFIX}/usr") + $(use_enable zip zip) + $(use_with zlib zlib "${EPREFIX}/usr") + $(use_enable debug debug) + ) + + # DBA support + if use cdb || use berkdb || use flatfile || use gdbm || use inifile \ + || use qdbm ; then + our_conf+=( "--enable-dba${shared}" ) + fi + + # DBA drivers support + our_conf+=( + $(use_with cdb cdb) + $(use_with berkdb db4 "${EPREFIX}/usr") + $(use_enable flatfile flatfile) + $(use_with gdbm gdbm "${EPREFIX}/usr") + $(use_enable inifile inifile) + $(use_with qdbm qdbm "${EPREFIX}/usr") + ) + + # Support for the GD graphics library + our_conf+=( + $(use_with truetype freetype-dir "${EPREFIX}/usr") + $(use_with truetype t1lib "${EPREFIX}/usr") + $(use_enable cjk gd-jis-conv) + $(use_with gd jpeg-dir "${EPREFIX}/usr") + $(use_with gd png-dir "${EPREFIX}/usr") + $(use_with xpm xpm-dir "${EPREFIX}/usr") + $(use_with vpx vpx-dir "${EPREFIX}/usr") + ) + # enable gd last, so configure can pick up the previous settings + our_conf+=( $(use_with gd gd) ) + + # IMAP support + if use imap ; then + our_conf+=( + $(use_with imap imap "${EPREFIX}/usr") + $(use_with ssl imap-ssl "${EPREFIX}/usr") + ) + fi + + # Interbase/firebird support + our_conf+=( $(use_with firebird interbase "${EPREFIX}/usr") ) + + # LDAP support + if use ldap ; then + our_conf+=( + $(use_with ldap ldap "${EPREFIX}/usr") + $(use_with ldap-sasl ldap-sasl "${EPREFIX}/usr") + ) + fi + + # MySQL support + local mysqllib="mysqlnd" + local mysqlilib="mysqlnd" + use libmysqlclient && mysqllib="${EPREFIX}/usr" + use libmysqlclient && mysqlilib="${EPREFIX}/usr/bin/mysql_config" + + our_conf+=( $(use_with mysql mysql "${mysqllib}") ) + our_conf+=( $(use_with mysqli mysqli "${mysqlilib}") ) + + local mysqlsock="${EPREFIX}/var/run/mysqld/mysqld.sock" + if use mysql || use mysqli ; then + our_conf+=( $(use_with mysql mysql-sock "${mysqlsock}") ) + fi + + # ODBC support + our_conf+=( + $(use_with odbc unixODBC "${EPREFIX}/usr") + $(use_with iodbc iodbc "${EPREFIX}/usr") + ) + + # Oracle support + our_conf+=( $(use_with oci8-instant-client oci8) ) + + # PDO support + if use pdo ; then + our_conf+=( + $(use_with mssql pdo-dblib) + $(use_with mysql pdo-mysql "${mysqllib}") + $(use_with postgres pdo-pgsql) + $(use_with sqlite pdo-sqlite "${EPREFIX}/usr") + $(use_with firebird pdo-firebird "${EPREFIX}/usr") + $(use_with odbc pdo-odbc "unixODBC,${EPREFIX}/usr") + $(use_with oci8-instant-client pdo-oci) + ) + fi + + # readline/libedit support + our_conf+=( + $(use_with readline readline "${EPREFIX}/usr") + $(use_with libedit libedit "${EPREFIX}/usr") + ) + + # Session support + if use session ; then + our_conf+=( $(use_with sharedmem mm "${EPREFIX}/usr") ) + else + our_conf+=( $(use_enable session session) ) + fi + + # Use pic for shared modules such as apache2's mod_php + our_conf+=( --with-pic ) + + # we use the system copy of pcre + # --with-pcre-regex affects ext/pcre + # --with-pcre-dir affects ext/filter and ext/zip + our_conf+=( + --with-pcre-regex="${EPREFIX}/usr" + --with-pcre-dir="${EPREFIX}/usr" + ) + + # Catch CFLAGS problems + # Fixes bug #14067. + # Changed order to run it in reverse for bug #32022 and #12021. + replace-cpu-flags "k6*" "i586" + + # Support user-passed configuration parameters + our_conf+=( ${EXTRA_ECONF:-} ) + + # Support the Apache2 extras, they must be set globally for all + # SAPIs to work correctly, especially for external PHP extensions + + mkdir -p "${WORKDIR}/sapis-build" || die + for one_sapi in $SAPIS ; do + use "${one_sapi}" || continue + php_set_ini_dir "${one_sapi}" + + # The BUILD_DIR variable is used to determine where to output + # the files that autotools creates. This was all originally + # based on the autotools-utils eclass. + BUILD_DIR="${WORKDIR}/sapis-build/${one_sapi}" + cp -r "${S}" "${BUILD_DIR}" || die + cd "${BUILD_DIR}" || die + + local sapi_conf=( + --with-config-file-path="${PHP_INI_DIR}" + --with-config-file-scan-dir="${PHP_EXT_INI_DIR_ACTIVE}" + ) + + for sapi in $SAPIS ; do + case "$sapi" in + cli|cgi|embed|fpm) + if [[ "${one_sapi}" == "${sapi}" ]] ; then + sapi_conf+=( "--enable-${sapi}" ) + else + sapi_conf+=( "--disable-${sapi}" ) + fi + ;; + + apache2) + if [[ "${one_sapi}" == "${sapi}" ]] ; then + sapi_conf+=( --with-apxs2="${EPREFIX}/usr/sbin/apxs" ) + else + sapi_conf+=( --without-apxs2 ) + fi + ;; + esac + done + + # Construct the $myeconfargs array by concatenating $our_conf + # (the common args) and $sapi_conf (the SAPI-specific args). + local myeconfargs=( "${our_conf[@]}" ) + myeconfargs+=( "${sapi_conf[@]}" ) + + pushd "${BUILD_DIR}" > /dev/null || die + econf "${myeconfargs[@]}" + popd > /dev/null || die + done +} + +src_compile() { + # snmp seems to run during src_compile, too (bug #324739) + addpredict /usr/share/snmp/mibs/.index + addpredict /var/lib/net-snmp/mib_indexes + + for sapi in ${SAPIS} ; do + if use "${sapi}"; then + cd "${WORKDIR}/sapis-build/$sapi" || \ + die "Failed to change dir to ${WORKDIR}/sapis-build/$1" + emake + fi + done +} + +src_install() { + # see bug #324739 for what happens when we don't have that + addpredict /usr/share/snmp/mibs/.index + + # grab the first SAPI that got built and install common files from there + local first_sapi="" + for sapi in $SAPIS ; do + if use $sapi ; then + first_sapi=$sapi + break + fi + done + + # Makefile forgets to create this before trying to write to it... + dodir "${PHP_DESTDIR#${EPREFIX}}/bin" + + # Install php environment (without any sapis) + cd "${WORKDIR}/sapis-build/$first_sapi" || die + emake INSTALL_ROOT="${D}" \ + install-build install-headers install-programs + + local extension_dir="$("${ED}/${PHP_DESTDIR#${EPREFIX}}/bin/php-config" --extension-dir)" + + # Create the directory where we'll put version-specific php scripts + keepdir "/usr/share/php${PHP_MV}" + + local sapi="", file="" + local sapi_list="" + + for sapi in ${SAPIS}; do + if use "${sapi}" ; then + einfo "Installing SAPI: ${sapi}" + cd "${WORKDIR}/sapis-build/${sapi}" || die + + if [[ "${sapi}" == "apache2" ]] ; then + # We're specifically not using emake install-sapi as libtool + # may cause unnecessary relink failures (see bug #351266) + insinto "${PHP_DESTDIR#${EPREFIX}}/apache2/" + newins ".libs/libphp5$(get_libname)" \ + "libphp${PHP_MV}$(get_libname)" + keepdir "/usr/$(get_libdir)/apache2/modules" + else + # needed each time, php_install_ini would reset it + local dest="${PHP_DESTDIR#${EPREFIX}}" + into "${dest}" + case "$sapi" in + cli) + source="sapi/cli/php" + ;; + cgi) + source="sapi/cgi/php-cgi" + ;; + fpm) + source="sapi/fpm/php-fpm" + ;; + embed) + source="libs/libphp${PHP_MV}$(get_libname)" + ;; + *) + die "unhandled sapi in src_install" + ;; + esac + + if [[ "${source}" == *"$(get_libname)" ]]; then + dolib.so "${source}" + else + dobin "${source}" + local name="$(basename ${source})" + dosym "${dest}/bin/${name}" "/usr/bin/${name}${SLOT}" + fi + fi + + php_install_ini "${sapi}" + + # construct correct SAPI string for php-config + # thanks to ferringb for the bash voodoo + if [[ "${sapi}" == "apache2" ]]; then + sapi_list="${sapi_list:+${sapi_list} }apache2handler" + else + sapi_list="${sapi_list:+${sapi_list} }${sapi}" + fi + fi + done + + # Installing opcache module + if use opcache ; then + into "${PHP_DESTDIR#${EPREFIX}}" + dolib.so "modules/opcache$(get_libname)" + fi + + # Install env.d files + newenvd "${FILESDIR}/20php5-envd" "20php${SLOT}" + sed -e "s|/lib/|/$(get_libdir)/|g" -i "${ED}/etc/env.d/20php${SLOT}" || die + sed -e "s|php5|php${SLOT}|g" -i "${ED}/etc/env.d/20php${SLOT}" || die + + # set php-config variable correctly (bug #278439) + sed -e "s:^\(php_sapis=\)\".*\"$:\1\"${sapi_list}\":" -i \ + "${ED}/usr/$(get_libdir)/php${SLOT}/bin/php-config" || die + + if use fpm ; then + if use systemd; then + systemd_newunit "${FILESDIR}/php-fpm_at.service" \ + "php-fpm@${SLOT}.service" + else + systemd_newunit "${FILESDIR}/php-fpm_at-simple.service" \ + "php-fpm@${SLOT}.service" + fi + fi +} + +src_test() { + echo ">>> Test phase [test]: ${CATEGORY}/${PF}" + PHP_BIN="${WORKDIR}/sapis-build/cli/sapi/cli/php" + if [[ ! -x "${PHP_BIN}" ]] ; then + ewarn "Test phase requires USE=cli, skipping" + return + else + export TEST_PHP_EXECUTABLE="${PHP_BIN}" + fi + + if [[ -x "${WORKDIR}/sapis/cgi/php-cgi" ]] ; then + export TEST_PHP_CGI_EXECUTABLE="${WORKDIR}/sapis/cgi/php-cgi" + fi + + REPORT_EXIT_STATUS=1 "${TEST_PHP_EXECUTABLE}" -n -d \ + "session.save_path=${T}" \ + "${WORKDIR}/sapis-build/cli/run-tests.php" -n -q -d \ + "session.save_path=${T}" + + for name in ${EXPECTED_TEST_FAILURES}; do + mv "${name}.out" "${name}.out.orig" 2>/dev/null || die + done + + local failed="$(find -name '*.out')" + if [[ ${failed} != "" ]] ; then + ewarn "The following test cases failed unexpectedly:" + for name in ${failed}; do + ewarn " ${name/.out/}" + done + else + einfo "No unexpected test failures, all fine" + fi + + if [[ ${PHP_SHOW_UNEXPECTED_TEST_PASS} == "1" ]] ; then + local passed="" + for name in ${EXPECTED_TEST_FAILURES}; do + [[ -f "${name}.diff" ]] && continue + passed="${passed} ${name}" + done + if [[ ${passed} != "" ]] ; then + einfo "The following test cases passed unexpectedly:" + for name in ${passed}; do + ewarn " ${passed}" + done + else + einfo "None of the known-to-fail tests passed, all fine" + fi + fi +} + +pkg_postinst() { + # Output some general info to the user + if use apache2 ; then + APACHE2_MOD_DEFINE="PHP" + APACHE2_MOD_CONF="70_mod_php" # Provided by app-eselect/eselect-php + apache-module_pkg_postinst + fi + + # Create the symlinks for php + for m in ${SAPIS}; do + [[ ${m} == 'embed' ]] && continue; + if use $m ; then + local ci=$(eselect php show $m) + if [[ -z $ci ]]; then + eselect php set $m php${SLOT} || die + einfo "Switched ${m} to use php:${SLOT}" + einfo + elif [[ $ci != "php${SLOT}" ]] ; then + elog "To switch $m to use php:${SLOT}, run" + elog " eselect php set $m php${SLOT}" + elog + fi + fi + done + + # Remove dead symlinks for SAPIs that were just disabled. For + # example, if the user has the cgi SAPI enabled, then he has an + # eselect-php symlink for it. If he later reinstalls PHP with + # USE="-cgi", that symlink will break. This call to eselect is + # supposed to remove that dead link per bug 572436. + eselect php cleanup || die + + if ! has "php${SLOT/./-}" ${PHP_TARGETS}; then + elog "To build extensions for this version of PHP, you will need to" + elog "add php${SLOT/./-} to your PHP_TARGETS USE_EXPAND variable." + elog + fi + + # Only mention PHP_INI_VERSION if the user doesn't have it set. + case "${PHP_INI_VERSION}" in + production|development) + ;; + *) + elog "This ebuild installed a version of php.ini based on" + elog "${PHP_INI_UPSTREAM}. You can choose which version of" + elog "php.ini to install by default by setting PHP_INI_VERSION" + elog "to either 'production' or 'development' in your make.conf." + elog "Both versions of php.ini can be found with the PHP docs in" + elog "${EPREFIX}/usr/share/doc/${PF}" + elog + ;; + esac + + elog "For details on how version slotting works, please see" + elog "the wiki:" + elog + elog " https://wiki.gentoo.org/wiki/PHP" + elog +} + +pkg_postrm() { + # This serves two purposes. First, if we have just removed the last + # installed version of PHP, then this will remove any dead symlinks + # belonging to eselect-php. Second, if a user upgrades slots from + # (say) 5.6 to 7.0 and depcleans the old slot, then this will update + # his existing symlinks to point to the new 7.0 installation. The + # latter is bug 432962. + # + # Note: the eselect-php package may not be installed at this point, + # so we can't die() if this command fails. + eselect php cleanup +} diff --git a/dev-lang/php/php-7.0.8-r1.ebuild b/dev-lang/php/php-7.0.8-r1.ebuild new file mode 100644 index 000000000000..9bd15572e425 --- /dev/null +++ b/dev-lang/php/php-7.0.8-r1.ebuild @@ -0,0 +1,809 @@ +# Copyright 1999-2016 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Id$ + +EAPI=5 + +inherit eutils autotools flag-o-matic versionator depend.apache apache-module libtool systemd + +KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd ~x86-freebsd ~amd64-linux ~ia64-linux ~x86-linux ~ppc-macos ~x64-macos ~x86-macos" + +function php_get_uri () +{ + case "${1}" in + "php-pre") + echo "http://downloads.php.net/ab/${2}" + ;; + "php") + echo "http://www.php.net/distributions/${2}" + ;; + "olemarkus") + echo "https://dev.gentoo.org/~olemarkus/php/${2}" + ;; + "gentoo") + echo "mirror://gentoo/${2}" + ;; + *) + die "unhandled case in php_get_uri" + ;; + esac +} + +PHP_MV="$(get_major_version)" +SLOT="$(get_version_component_range 1-2)" + +# alias, so we can handle different types of releases (finals, rcs, alphas, +# betas, ...) w/o changing the whole ebuild +PHP_PV="${PV/_rc/RC}" +PHP_PV="${PHP_PV/_alpha/alpha}" +PHP_PV="${PHP_PV/_beta/beta}" +PHP_RELEASE="php" +[[ ${PV} == ${PV/_alpha/} ]] || PHP_RELEASE="php-pre" +[[ ${PV} == ${PV/_beta/} ]] || PHP_RELEASE="php-pre" +[[ ${PV} == ${PV/_rc/} ]] || PHP_RELEASE="php-pre" +PHP_P="${PN}-${PHP_PV}" + +PHP_SRC_URI="$(php_get_uri "${PHP_RELEASE}" "${PHP_P}.tar.bz2")" + +PHP_FPM_CONF_VER="1" + +SRC_URI="${PHP_SRC_URI}" + +DESCRIPTION="The PHP language runtime engine" +HOMEPAGE="http://php.net/" +LICENSE="PHP-3" + +S="${WORKDIR}/${PHP_P}" + +# We can build the following SAPIs in the given order +SAPIS="embed cli cgi fpm apache2 phpdbg" + +# SAPIs and SAPI-specific USE flags (cli SAPI is default on): +IUSE="${IUSE} + ${SAPIS/cli/+cli} + threads" + +IUSE="${IUSE} bcmath berkdb bzip2 calendar cdb cjk + crypt +ctype curl debug + enchant exif frontbase +fileinfo +filter firebird + flatfile ftp gd gdbm gmp +hash +iconv imap inifile + intl iodbc ipv6 +json kerberos ldap ldap-sasl libedit libressl + mhash mssql mysql mysqli nls + oci8-instant-client odbc +opcache pcntl pdo +phar +posix postgres qdbm + readline recode selinux +session sharedmem + +simplexml snmp soap sockets spell sqlite ssl + sysvipc systemd tidy +tokenizer truetype unicode wddx webp + +xml xmlreader xmlwriter xmlrpc xpm xslt zip zlib" + +DEPEND=" + >=app-eselect/eselect-php-0.9.1[apache2?,fpm?] + >=dev-libs/libpcre-8.32[unicode] + apache2? ( || ( >=www-servers/apache-2.4[apache2_modules_unixd,threads=] + > \ + "${D}/${PHP_EXT_INI_DIR}"/opcache.ini + dosym "${PHP_EXT_INI_DIR#${EPREFIX}}/opcache.ini" \ + "${PHP_EXT_INI_DIR_ACTIVE#${EPREFIX}}/opcache.ini" + fi + + # SAPI-specific handling + if [[ "${sapi}" == "fpm" ]] ; then + einfo "Installing FPM config files php-fpm.conf and www.conf" + insinto "${PHP_INI_DIR#${EPREFIX}}" + doins sapi/fpm/php-fpm.conf + insinto "${PHP_INI_DIR#${EPREFIX}}/fpm.d" + doins sapi/fpm/www.conf + fi + + dodoc php.ini-development + dodoc php.ini-production +} + +php_set_ini_dir() { + PHP_INI_DIR="${EPREFIX}/etc/php/${1}-php${SLOT}" + PHP_EXT_INI_DIR="${PHP_INI_DIR}/ext" + PHP_EXT_INI_DIR_ACTIVE="${PHP_INI_DIR}/ext-active" +} + +src_prepare() { + # Change PHP branding + # Get the alpha/beta/rc version + sed -re "s|^(PHP_EXTRA_VERSION=\").*(\")|\1-pl${PR/r/}-gentoo\2|g" \ + -i configure.in || die "Unable to change PHP branding" + + # Patch PHP to show Gentoo as the server platform + sed -e 's/PHP_UNAME=`uname -a | xargs`/PHP_UNAME=`uname -s -n -r -v | xargs`/g' \ + -i configure.in || die "Failed to fix server platform name" + + # Patch PHP to support heimdal instead of mit-krb5 + if has_version "app-crypt/heimdal" ; then + sed -e 's|gssapi_krb5|gssapi|g' -i acinclude.m4 \ + || die "Failed to fix heimdal libname" + sed -e 's|PHP_ADD_LIBRARY(k5crypto, 1, $1)||g' -i acinclude.m4 \ + || die "Failed to fix heimdal crypt library reference" + fi + + # Add user patches #357637 + epatch_user + + # Force rebuilding aclocal.m4 + rm -f aclocal.m4 || die + eautoreconf + + if [[ ${CHOST} == *-darwin* ]] ; then + # http://bugs.php.net/bug.php?id=48795, bug #343481 + sed -i -e '/BUILD_CGI="\\$(CC)/s/CC/CXX/' configure || die + fi + + # In php-7.x, the FPM pool configuration files have been split off + # of the main config. By default the pool config files go in + # e.g. /etc/php-fpm.d, which isn't slotted. So here we move the + # include directory to a subdirectory "fpm.d" of $PHP_INI_DIR. Later + # we'll install the pool configuration file "www.conf" there. + php_set_ini_dir fpm + sed -i "s~^include=.*$~include=${PHP_INI_DIR}/fpm.d/*.conf~" \ + sapi/fpm/php-fpm.conf.in \ + || die 'failed to move the include directory in php-fpm.conf' +} + +src_configure() { + addpredict /usr/share/snmp/mibs/.index + addpredict /var/lib/net-snmp/mib_indexes + + PHP_DESTDIR="${EPREFIX}/usr/$(get_libdir)/php${SLOT}" + + # The php-fpm config file wants localstatedir to be ${EPREFIX}/var + # and not the Gentoo default ${EPREFIX}/var/lib. See bug 572002. + local our_conf=( + --prefix="${PHP_DESTDIR}" + --mandir="${PHP_DESTDIR}/man" + --infodir="${PHP_DESTDIR}/info" + --libdir="${PHP_DESTDIR}/lib" + --with-libdir="$(get_libdir)" + --localstatedir="${EPREFIX}/var" + --without-pear + $(use_enable threads maintainer-zts) + ) + + our_conf+=( + $(use_enable bcmath bcmath) + $(use_with bzip2 bz2 "${EPREFIX}/usr") + $(use_enable calendar calendar) + $(use_enable ctype ctype) + $(use_with curl curl "${EPREFIX}/usr") + $(use_enable xml dom) + $(use_with enchant enchant "${EPREFIX}/usr") + $(use_enable exif exif) + $(use_enable fileinfo fileinfo) + $(use_enable filter filter) + $(use_enable ftp ftp) + $(use_with nls gettext "${EPREFIX}/usr") + $(use_with gmp gmp "${EPREFIX}/usr") + $(use_enable hash hash) + $(use_with mhash mhash "${EPREFIX}/usr") + $(use_with iconv iconv \ + $(use elibc_glibc || use elibc_musl || echo "${EPREFIX}/usr")) + $(use_enable intl intl) + $(use_enable ipv6 ipv6) + $(use_enable json json) + $(use_with kerberos kerberos "${EPREFIX}/usr") + $(use_enable xml libxml) + $(use_with xml libxml-dir "${EPREFIX}/usr") + $(use_enable unicode mbstring) + $(use_with crypt mcrypt "${EPREFIX}/usr") + $(use_with unicode onig "${EPREFIX}/usr") + $(use_with ssl openssl "${EPREFIX}/usr") + $(use_with ssl openssl-dir "${EPREFIX}/usr") + $(use_enable pcntl pcntl) + $(use_enable phar phar) + $(use_enable pdo pdo) + $(use_enable opcache opcache) + $(use_with postgres pgsql "${EPREFIX}/usr") + $(use_enable posix posix) + $(use_with spell pspell "${EPREFIX}/usr") + $(use_with recode recode "${EPREFIX}/usr") + $(use_enable simplexml simplexml) + $(use_enable sharedmem shmop) + $(use_with snmp snmp "${EPREFIX}/usr") + $(use_enable soap soap) + $(use_enable sockets sockets) + $(use_with sqlite sqlite3 "${EPREFIX}/usr") + $(use_enable sysvipc sysvmsg) + $(use_enable sysvipc sysvsem) + $(use_enable sysvipc sysvshm) + $(use_with systemd fpm-systemd) + $(use_with tidy tidy "${EPREFIX}/usr") + $(use_enable tokenizer tokenizer) + $(use_enable wddx wddx) + $(use_enable xml xml) + $(use_enable xmlreader xmlreader) + $(use_enable xmlwriter xmlwriter) + $(use_with xmlrpc xmlrpc) + $(use_with xslt xsl "${EPREFIX}/usr") + $(use_enable zip zip) + $(use_with zlib zlib "${EPREFIX}/usr") + $(use_enable debug debug) + ) + + # DBA support + if use cdb || use berkdb || use flatfile || use gdbm || use inifile \ + || use qdbm ; then + our_conf+=( "--enable-dba${shared}" ) + fi + + # DBA drivers support + our_conf+=( + $(use_with cdb cdb) + $(use_with berkdb db4 "${EPREFIX}/usr") + $(use_enable flatfile flatfile) + $(use_with gdbm gdbm "${EPREFIX}/usr") + $(use_enable inifile inifile) + $(use_with qdbm qdbm "${EPREFIX}/usr") + ) + + # Support for the GD graphics library + our_conf+=( + $(use_with truetype freetype-dir "${EPREFIX}/usr") + $(use_enable cjk gd-jis-conv) + $(use_with gd jpeg-dir "${EPREFIX}/usr") + $(use_with gd png-dir "${EPREFIX}/usr") + $(use_with xpm xpm-dir "${EPREFIX}/usr") + ) + if use webp; then + our_conf+=( --with-webp-dir="${EPREFIX}/usr" ) + fi + # enable gd last, so configure can pick up the previous settings + our_conf+=( $(use_with gd gd) ) + + # IMAP support + if use imap ; then + our_conf+=( + $(use_with imap imap "${EPREFIX}/usr") + $(use_with ssl imap-ssl "${EPREFIX}/usr") + ) + fi + + # Interbase/firebird support + our_conf+=( $(use_with firebird interbase "${EPREFIX}/usr") ) + + # LDAP support + if use ldap ; then + our_conf+=( + $(use_with ldap ldap "${EPREFIX}/usr") + $(use_with ldap-sasl ldap-sasl "${EPREFIX}/usr") + ) + fi + + # MySQL support + local mysqllib="mysqlnd" + local mysqlilib="mysqlnd" + + our_conf+=( $(use_with mysqli mysqli "${mysqlilib}") ) + + local mysqlsock="${EPREFIX}/var/run/mysqld/mysqld.sock" + if use mysql || use mysqli ; then + our_conf+=( $(use_with mysql mysql-sock "${mysqlsock}") ) + fi + + # ODBC support + our_conf+=( + $(use_with odbc unixODBC "${EPREFIX}/usr") + $(use_with iodbc iodbc "${EPREFIX}/usr") + ) + + # Oracle support + our_conf+=( $(use_with oci8-instant-client oci8) ) + + # PDO support + if use pdo ; then + our_conf+=( + $(use_with mssql pdo-dblib "${EPREFIX}/usr") + $(use_with mysql pdo-mysql "${mysqllib}") + $(use_with postgres pdo-pgsql) + $(use_with sqlite pdo-sqlite "${EPREFIX}/usr") + $(use_with firebird pdo-firebird "${EPREFIX}/usr") + $(use_with odbc pdo-odbc "unixODBC,${EPREFIX}/usr") + $(use_with oci8-instant-client pdo-oci) + ) + fi + + # readline/libedit support + our_conf+=( + $(use_with readline readline "${EPREFIX}/usr") + $(use_with libedit libedit "${EPREFIX}/usr") + ) + + # Session support + if use session ; then + our_conf+=( $(use_with sharedmem mm "${EPREFIX}/usr") ) + else + our_conf+=( $(use_enable session session) ) + fi + + # Use pic for shared modules such as apache2's mod_php + our_conf+=( --with-pic ) + + # we use the system copy of pcre + # --with-pcre-regex affects ext/pcre + # --with-pcre-dir affects ext/filter and ext/zip + our_conf+=( + --with-pcre-regex="${EPREFIX}/usr" + --with-pcre-dir="${EPREFIX}/usr" + ) + + # Catch CFLAGS problems + # Fixes bug #14067. + # Changed order to run it in reverse for bug #32022 and #12021. + replace-cpu-flags "k6*" "i586" + + # Support user-passed configuration parameters + our_conf+=( ${EXTRA_ECONF:-} ) + + # Support the Apache2 extras, they must be set globally for all + # SAPIs to work correctly, especially for external PHP extensions + + mkdir -p "${WORKDIR}/sapis-build" || die + for one_sapi in $SAPIS ; do + use "${one_sapi}" || continue + php_set_ini_dir "${one_sapi}" + + # The BUILD_DIR variable is used to determine where to output + # the files that autotools creates. This was all originally + # based on the autotools-utils eclass. + BUILD_DIR="${WORKDIR}/sapis-build/${one_sapi}" + cp -r "${S}" "${BUILD_DIR}" || die + cd "${BUILD_DIR}" || die + + local sapi_conf=( + --with-config-file-path="${PHP_INI_DIR}" + --with-config-file-scan-dir="${PHP_EXT_INI_DIR_ACTIVE}" + ) + + for sapi in $SAPIS ; do + case "$sapi" in + cli|cgi|embed|fpm|phpdbg) + if [[ "${one_sapi}" == "${sapi}" ]] ; then + sapi_conf+=( "--enable-${sapi}" ) + else + sapi_conf+=( "--disable-${sapi}" ) + fi + ;; + + apache2) + if [[ "${one_sapi}" == "${sapi}" ]] ; then + sapi_conf+=( --with-apxs2="${EPREFIX}/usr/sbin/apxs" ) + else + sapi_conf+=( --without-apxs2 ) + fi + ;; + esac + done + + # Construct the $myeconfargs array by concatenating $our_conf + # (the common args) and $sapi_conf (the SAPI-specific args). + local myeconfargs=( "${our_conf[@]}" ) + myeconfargs+=( "${sapi_conf[@]}" ) + + pushd "${BUILD_DIR}" > /dev/null || die + econf "${myeconfargs[@]}" + popd > /dev/null || die + done +} + +src_compile() { + # snmp seems to run during src_compile, too (bug #324739) + addpredict /usr/share/snmp/mibs/.index + addpredict /var/lib/net-snmp/mib_indexes + + for sapi in ${SAPIS} ; do + if use "${sapi}"; then + cd "${WORKDIR}/sapis-build/$sapi" || \ + die "Failed to change dir to ${WORKDIR}/sapis-build/$1" + emake + fi + done +} + +src_install() { + # see bug #324739 for what happens when we don't have that + addpredict /usr/share/snmp/mibs/.index + + # grab the first SAPI that got built and install common files from there + local first_sapi="" + for sapi in $SAPIS ; do + if use $sapi ; then + first_sapi=$sapi + break + fi + done + + # Makefile forgets to create this before trying to write to it... + dodir "${PHP_DESTDIR#${EPREFIX}}/bin" + + # Install php environment (without any sapis) + cd "${WORKDIR}/sapis-build/$first_sapi" || die + emake INSTALL_ROOT="${D}" \ + install-build install-headers install-programs + + local extension_dir="$("${ED}/${PHP_DESTDIR#${EPREFIX}}/bin/php-config" --extension-dir)" + + # Create the directory where we'll put version-specific php scripts + keepdir "/usr/share/php${PHP_MV}" + + local sapi="", file="" + local sapi_list="" + + for sapi in ${SAPIS}; do + if use "${sapi}" ; then + einfo "Installing SAPI: ${sapi}" + cd "${WORKDIR}/sapis-build/${sapi}" || die + + if [[ "${sapi}" == "apache2" ]] ; then + # We're specifically not using emake install-sapi as libtool + # may cause unnecessary relink failures (see bug #351266) + insinto "${PHP_DESTDIR#${EPREFIX}}/apache2/" + newins ".libs/libphp${PHP_MV}$(get_libname)" \ + "libphp${PHP_MV}$(get_libname)" + keepdir "/usr/$(get_libdir)/apache2/modules" + else + # needed each time, php_install_ini would reset it + local dest="${PHP_DESTDIR#${EPREFIX}}" + into "${dest}" + case "$sapi" in + cli) + source="sapi/cli/php" + ;; + cgi) + source="sapi/cgi/php-cgi" + ;; + fpm) + source="sapi/fpm/php-fpm" + ;; + embed) + source="libs/libphp${PHP_MV}$(get_libname)" + ;; + phpdbg) + source="sapi/phpdbg/phpdbg" + ;; + *) + die "unhandled sapi in src_install" + ;; + esac + + if [[ "${source}" == *"$(get_libname)" ]]; then + dolib.so "${source}" + else + dobin "${source}" + local name="$(basename ${source})" + dosym "${dest}/bin/${name}" "/usr/bin/${name}${SLOT}" + fi + fi + + php_install_ini "${sapi}" + + # construct correct SAPI string for php-config + # thanks to ferringb for the bash voodoo + if [[ "${sapi}" == "apache2" ]]; then + sapi_list="${sapi_list:+${sapi_list} }apache2handler" + else + sapi_list="${sapi_list:+${sapi_list} }${sapi}" + fi + fi + done + + # Installing opcache module + if use opcache ; then + into "${PHP_DESTDIR#${EPREFIX}}" + dolib.so "modules/opcache$(get_libname)" + fi + + # Install env.d files + newenvd "${FILESDIR}/20php5-envd" "20php${SLOT}" + sed -e "s|/lib/|/$(get_libdir)/|g" -i "${ED}/etc/env.d/20php${SLOT}" || die + sed -e "s|php5|php${SLOT}|g" -i "${ED}/etc/env.d/20php${SLOT}" || die + + # set php-config variable correctly (bug #278439) + sed -e "s:^\(php_sapis=\)\".*\"$:\1\"${sapi_list}\":" -i \ + "${ED}/usr/$(get_libdir)/php${SLOT}/bin/php-config" || die + + if use fpm ; then + if use systemd; then + systemd_newunit "${FILESDIR}/php-fpm_at.service" \ + "php-fpm@${SLOT}.service" + else + systemd_newunit "${FILESDIR}/php-fpm_at-simple.service" \ + "php-fpm@${SLOT}.service" + fi + fi +} + +src_test() { + echo ">>> Test phase [test]: ${CATEGORY}/${PF}" + PHP_BIN="${WORKDIR}/sapis-build/cli/sapi/cli/php" + if [[ ! -x "${PHP_BIN}" ]] ; then + ewarn "Test phase requires USE=cli, skipping" + return + else + export TEST_PHP_EXECUTABLE="${PHP_BIN}" + fi + + if [[ -x "${WORKDIR}/sapis/cgi/php-cgi" ]] ; then + export TEST_PHP_CGI_EXECUTABLE="${WORKDIR}/sapis/cgi/php-cgi" + fi + + REPORT_EXIT_STATUS=1 "${TEST_PHP_EXECUTABLE}" -n -d \ + "session.save_path=${T}" \ + "${WORKDIR}/sapis-build/cli/run-tests.php" -n -q -d \ + "session.save_path=${T}" + + for name in ${EXPECTED_TEST_FAILURES}; do + mv "${name}.out" "${name}.out.orig" 2>/dev/null || die + done + + local failed="$(find -name '*.out')" + if [[ ${failed} != "" ]] ; then + ewarn "The following test cases failed unexpectedly:" + for name in ${failed}; do + ewarn " ${name/.out/}" + done + else + einfo "No unexpected test failures, all fine" + fi + + if [[ ${PHP_SHOW_UNEXPECTED_TEST_PASS} == "1" ]] ; then + local passed="" + for name in ${EXPECTED_TEST_FAILURES}; do + [[ -f "${name}.diff" ]] && continue + passed="${passed} ${name}" + done + if [[ ${passed} != "" ]] ; then + einfo "The following test cases passed unexpectedly:" + for name in ${passed}; do + ewarn " ${passed}" + done + else + einfo "None of the known-to-fail tests passed, all fine" + fi + fi +} + +pkg_postinst() { + # Output some general info to the user + if use apache2 ; then + APACHE2_MOD_DEFINE="PHP" + APACHE2_MOD_CONF="70_mod_php" # Provided by app-eselect/eselect-php + apache-module_pkg_postinst + fi + + # Create the symlinks for php + for m in ${SAPIS}; do + [[ ${m} == 'embed' ]] && continue; + if use $m ; then + local ci=$(eselect php show $m) + if [[ -z $ci ]]; then + eselect php set $m php${SLOT} || die + einfo "Switched ${m} to use php:${SLOT}" + einfo + elif [[ $ci != "php${SLOT}" ]] ; then + elog "To switch $m to use php:${SLOT}, run" + elog " eselect php set $m php${SLOT}" + elog + fi + fi + done + + # Remove dead symlinks for SAPIs that were just disabled. For + # example, if the user has the cgi SAPI enabled, then he has an + # eselect-php symlink for it. If he later reinstalls PHP with + # USE="-cgi", that symlink will break. This call to eselect is + # supposed to remove that dead link per bug 572436. + eselect php cleanup || die + + if ! has "php${SLOT/./-}" ${PHP_TARGETS}; then + elog "To build extensions for this version of PHP, you will need to" + elog "add php${SLOT/./-} to your PHP_TARGETS USE_EXPAND variable." + elog + fi + + # Only mention PHP_INI_VERSION if the user doesn't have it set. + case "${PHP_INI_VERSION}" in + production|development) + ;; + *) + elog "This ebuild installed a version of php.ini based on" + elog "${PHP_INI_UPSTREAM}. You can choose which version of" + elog "php.ini to install by default by setting PHP_INI_VERSION" + elog "to either 'production' or 'development' in your make.conf." + elog "Both versions of php.ini can be found with the PHP docs in" + elog "${EPREFIX}/usr/share/doc/${PF}" + elog + ;; + esac + + elog "For details on how version slotting works, please see" + elog "the wiki:" + elog + elog " https://wiki.gentoo.org/wiki/PHP" + elog +} + +pkg_postrm() { + # This serves two purposes. First, if we have just removed the last + # installed version of PHP, then this will remove any dead symlinks + # belonging to eselect-php. Second, if a user upgrades slots from + # (say) 5.6 to 7.0 and depcleans the old slot, then this will update + # his existing symlinks to point to the new 7.0 installation. The + # latter is bug 432962. + # + # Note: the eselect-php package may not be installed at this point, + # so we can't die() if this command fails. + eselect php cleanup +} diff --git a/dev-lang/php/php-7.0.8.ebuild b/dev-lang/php/php-7.0.8.ebuild deleted file mode 100644 index 5925bb3a4da4..000000000000 --- a/dev-lang/php/php-7.0.8.ebuild +++ /dev/null @@ -1,808 +0,0 @@ -# Copyright 1999-2016 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -EAPI=5 - -inherit eutils autotools flag-o-matic versionator depend.apache apache-module libtool systemd - -KEYWORDS="~alpha ~amd64 ~arm ~hppa ~ia64 ~mips ~ppc ~ppc64 ~s390 ~sh ~sparc ~x86 ~amd64-fbsd ~x86-fbsd ~x86-freebsd ~amd64-linux ~ia64-linux ~x86-linux ~ppc-macos ~x64-macos ~x86-macos" - -function php_get_uri () -{ - case "${1}" in - "php-pre") - echo "http://downloads.php.net/ab/${2}" - ;; - "php") - echo "http://www.php.net/distributions/${2}" - ;; - "olemarkus") - echo "https://dev.gentoo.org/~olemarkus/php/${2}" - ;; - "gentoo") - echo "mirror://gentoo/${2}" - ;; - *) - die "unhandled case in php_get_uri" - ;; - esac -} - -PHP_MV="$(get_major_version)" -SLOT="$(get_version_component_range 1-2)" - -# alias, so we can handle different types of releases (finals, rcs, alphas, -# betas, ...) w/o changing the whole ebuild -PHP_PV="${PV/_rc/RC}" -PHP_PV="${PHP_PV/_alpha/alpha}" -PHP_PV="${PHP_PV/_beta/beta}" -PHP_RELEASE="php" -[[ ${PV} == ${PV/_alpha/} ]] || PHP_RELEASE="php-pre" -[[ ${PV} == ${PV/_beta/} ]] || PHP_RELEASE="php-pre" -[[ ${PV} == ${PV/_rc/} ]] || PHP_RELEASE="php-pre" -PHP_P="${PN}-${PHP_PV}" - -PHP_SRC_URI="$(php_get_uri "${PHP_RELEASE}" "${PHP_P}.tar.bz2")" - -PHP_FPM_CONF_VER="1" - -SRC_URI="${PHP_SRC_URI}" - -DESCRIPTION="The PHP language runtime engine" -HOMEPAGE="http://php.net/" -LICENSE="PHP-3" - -S="${WORKDIR}/${PHP_P}" - -# We can build the following SAPIs in the given order -SAPIS="embed cli cgi fpm apache2 phpdbg" - -# SAPIs and SAPI-specific USE flags (cli SAPI is default on): -IUSE="${IUSE} - ${SAPIS/cli/+cli} - threads" - -IUSE="${IUSE} bcmath berkdb bzip2 calendar cdb cjk - crypt +ctype curl debug - enchant exif frontbase +fileinfo +filter firebird - flatfile ftp gd gdbm gmp +hash +iconv imap inifile - intl iodbc ipv6 +json kerberos ldap ldap-sasl libedit libressl - mhash mssql mysql mysqli nls - oci8-instant-client odbc +opcache pcntl pdo +phar +posix postgres qdbm - readline recode selinux +session sharedmem - +simplexml snmp soap sockets spell sqlite ssl - sysvipc systemd tidy +tokenizer truetype unicode wddx webp - +xml xmlreader xmlwriter xmlrpc xpm xslt zip zlib" - -DEPEND=" - >=app-eselect/eselect-php-0.9.1[apache2?,fpm?] - >=dev-libs/libpcre-8.32[unicode] - apache2? ( || ( >=www-servers/apache-2.4[apache2_modules_unixd,threads=] - > \ - "${D}/${PHP_EXT_INI_DIR}"/opcache.ini - dosym "${PHP_EXT_INI_DIR#${EPREFIX}}/opcache.ini" \ - "${PHP_EXT_INI_DIR_ACTIVE#${EPREFIX}}/opcache.ini" - fi - - # SAPI-specific handling - if [[ "${sapi}" == "fpm" ]] ; then - einfo "Installing FPM config files php-fpm.conf and www.conf" - insinto "${PHP_INI_DIR#${EPREFIX}}" - doins sapi/fpm/php-fpm.conf - insinto "${PHP_INI_DIR#${EPREFIX}}/fpm.d" - doins sapi/fpm/www.conf - fi - - dodoc php.ini-development - dodoc php.ini-production -} - -php_set_ini_dir() { - PHP_INI_DIR="${EPREFIX}/etc/php/${1}-php${SLOT}" - PHP_EXT_INI_DIR="${PHP_INI_DIR}/ext" - PHP_EXT_INI_DIR_ACTIVE="${PHP_INI_DIR}/ext-active" -} - -src_prepare() { - # Change PHP branding - # Get the alpha/beta/rc version - sed -re "s|^(PHP_EXTRA_VERSION=\").*(\")|\1-pl${PR/r/}-gentoo\2|g" \ - -i configure.in || die "Unable to change PHP branding" - - # Patch PHP to show Gentoo as the server platform - sed -e 's/PHP_UNAME=`uname -a | xargs`/PHP_UNAME=`uname -s -n -r -v | xargs`/g' \ - -i configure.in || die "Failed to fix server platform name" - - # Patch PHP to support heimdal instead of mit-krb5 - if has_version "app-crypt/heimdal" ; then - sed -e 's|gssapi_krb5|gssapi|g' -i acinclude.m4 \ - || die "Failed to fix heimdal libname" - sed -e 's|PHP_ADD_LIBRARY(k5crypto, 1, $1)||g' -i acinclude.m4 \ - || die "Failed to fix heimdal crypt library reference" - fi - - # Add user patches #357637 - epatch_user - - # Force rebuilding aclocal.m4 - rm -f aclocal.m4 || die - eautoreconf - - if [[ ${CHOST} == *-darwin* ]] ; then - # http://bugs.php.net/bug.php?id=48795, bug #343481 - sed -i -e '/BUILD_CGI="\\$(CC)/s/CC/CXX/' configure || die - fi - - # In php-7.x, the FPM pool configuration files have been split off - # of the main config. By default the pool config files go in - # e.g. /etc/php-fpm.d, which isn't slotted. So here we move the - # include directory to a subdirectory "fpm.d" of $PHP_INI_DIR. Later - # we'll install the pool configuration file "www.conf" there. - php_set_ini_dir fpm - sed -i "s~^include=.*$~include=${PHP_INI_DIR}/fpm.d/*.conf~" \ - sapi/fpm/php-fpm.conf.in \ - || die 'failed to move the include directory in php-fpm.conf' -} - -src_configure() { - addpredict /usr/share/snmp/mibs/.index - addpredict /var/lib/net-snmp/mib_indexes - - PHP_DESTDIR="${EPREFIX}/usr/$(get_libdir)/php${SLOT}" - - # The php-fpm config file wants localstatedir to be ${EPREFIX}/var - # and not the Gentoo default ${EPREFIX}/var/lib. See bug 572002. - local our_conf=( - --prefix="${PHP_DESTDIR}" - --mandir="${PHP_DESTDIR}/man" - --infodir="${PHP_DESTDIR}/info" - --libdir="${PHP_DESTDIR}/lib" - --with-libdir="$(get_libdir)" - --localstatedir="${EPREFIX}/var" - --without-pear - $(use_enable threads maintainer-zts) - ) - - our_conf+=( - $(use_enable bcmath bcmath) - $(use_with bzip2 bz2 "${EPREFIX}/usr") - $(use_enable calendar calendar) - $(use_enable ctype ctype) - $(use_with curl curl "${EPREFIX}/usr") - $(use_enable xml dom) - $(use_with enchant enchant "${EPREFIX}/usr") - $(use_enable exif exif) - $(use_enable fileinfo fileinfo) - $(use_enable filter filter) - $(use_enable ftp ftp) - $(use_with nls gettext "${EPREFIX}/usr") - $(use_with gmp gmp "${EPREFIX}/usr") - $(use_enable hash hash) - $(use_with mhash mhash "${EPREFIX}/usr") - $(use_with iconv iconv \ - $(use elibc_glibc || use elibc_musl || echo "${EPREFIX}/usr")) - $(use_enable intl intl) - $(use_enable ipv6 ipv6) - $(use_enable json json) - $(use_with kerberos kerberos "${EPREFIX}/usr") - $(use_enable xml libxml) - $(use_with xml libxml-dir "${EPREFIX}/usr") - $(use_enable unicode mbstring) - $(use_with crypt mcrypt "${EPREFIX}/usr") - $(use_with unicode onig "${EPREFIX}/usr") - $(use_with ssl openssl "${EPREFIX}/usr") - $(use_with ssl openssl-dir "${EPREFIX}/usr") - $(use_enable pcntl pcntl) - $(use_enable phar phar) - $(use_enable pdo pdo) - $(use_enable opcache opcache) - $(use_with postgres pgsql "${EPREFIX}/usr") - $(use_enable posix posix) - $(use_with spell pspell "${EPREFIX}/usr") - $(use_with recode recode "${EPREFIX}/usr") - $(use_enable simplexml simplexml) - $(use_enable sharedmem shmop) - $(use_with snmp snmp "${EPREFIX}/usr") - $(use_enable soap soap) - $(use_enable sockets sockets) - $(use_with sqlite sqlite3 "${EPREFIX}/usr") - $(use_enable sysvipc sysvmsg) - $(use_enable sysvipc sysvsem) - $(use_enable sysvipc sysvshm) - $(use_with systemd fpm-systemd) - $(use_with tidy tidy "${EPREFIX}/usr") - $(use_enable tokenizer tokenizer) - $(use_enable wddx wddx) - $(use_enable xml xml) - $(use_enable xmlreader xmlreader) - $(use_enable xmlwriter xmlwriter) - $(use_with xmlrpc xmlrpc) - $(use_with xslt xsl "${EPREFIX}/usr") - $(use_enable zip zip) - $(use_with zlib zlib "${EPREFIX}/usr") - $(use_enable debug debug) - ) - - # DBA support - if use cdb || use berkdb || use flatfile || use gdbm || use inifile \ - || use qdbm ; then - our_conf+=( "--enable-dba${shared}" ) - fi - - # DBA drivers support - our_conf+=( - $(use_with cdb cdb) - $(use_with berkdb db4 "${EPREFIX}/usr") - $(use_enable flatfile flatfile) - $(use_with gdbm gdbm "${EPREFIX}/usr") - $(use_enable inifile inifile) - $(use_with qdbm qdbm "${EPREFIX}/usr") - ) - - # Support for the GD graphics library - our_conf+=( - $(use_with truetype freetype-dir "${EPREFIX}/usr") - $(use_enable cjk gd-jis-conv) - $(use_with gd jpeg-dir "${EPREFIX}/usr") - $(use_with gd png-dir "${EPREFIX}/usr") - $(use_with xpm xpm-dir "${EPREFIX}/usr") - ) - if use webp; then - our_conf+=( --with-webp-dir="${EPREFIX}/usr" ) - fi - # enable gd last, so configure can pick up the previous settings - our_conf+=( $(use_with gd gd) ) - - # IMAP support - if use imap ; then - our_conf+=( - $(use_with imap imap "${EPREFIX}/usr") - $(use_with ssl imap-ssl "${EPREFIX}/usr") - ) - fi - - # Interbase/firebird support - our_conf+=( $(use_with firebird interbase "${EPREFIX}/usr") ) - - # LDAP support - if use ldap ; then - our_conf+=( - $(use_with ldap ldap "${EPREFIX}/usr") - $(use_with ldap-sasl ldap-sasl "${EPREFIX}/usr") - ) - fi - - # MySQL support - local mysqllib="mysqlnd" - local mysqlilib="mysqlnd" - - our_conf+=( $(use_with mysqli mysqli "${mysqlilib}") ) - - local mysqlsock="${EPREFIX}/var/run/mysqld/mysqld.sock" - if use mysql || use mysqli ; then - our_conf+=( $(use_with mysql mysql-sock "${mysqlsock}") ) - fi - - # ODBC support - our_conf+=( - $(use_with odbc unixODBC "${EPREFIX}/usr") - $(use_with iodbc iodbc "${EPREFIX}/usr") - ) - - # Oracle support - our_conf+=( $(use_with oci8-instant-client oci8) ) - - # PDO support - if use pdo ; then - our_conf+=( - $(use_with mssql pdo-dblib "${EPREFIX}/usr") - $(use_with mysql pdo-mysql "${mysqllib}") - $(use_with postgres pdo-pgsql) - $(use_with sqlite pdo-sqlite "${EPREFIX}/usr") - $(use_with firebird pdo-firebird "${EPREFIX}/usr") - $(use_with odbc pdo-odbc "unixODBC,${EPREFIX}/usr") - $(use_with oci8-instant-client pdo-oci) - ) - fi - - # readline/libedit support - our_conf+=( - $(use_with readline readline "${EPREFIX}/usr") - $(use_with libedit libedit "${EPREFIX}/usr") - ) - - # Session support - if use session ; then - our_conf+=( $(use_with sharedmem mm "${EPREFIX}/usr") ) - else - our_conf+=( $(use_enable session session) ) - fi - - # Use pic for shared modules such as apache2's mod_php - our_conf+=( --with-pic ) - - # we use the system copy of pcre - # --with-pcre-regex affects ext/pcre - # --with-pcre-dir affects ext/filter and ext/zip - our_conf+=( - --with-pcre-regex="${EPREFIX}/usr" - --with-pcre-dir="${EPREFIX}/usr" - ) - - # Catch CFLAGS problems - # Fixes bug #14067. - # Changed order to run it in reverse for bug #32022 and #12021. - replace-cpu-flags "k6*" "i586" - - # Support user-passed configuration parameters - our_conf+=( ${EXTRA_ECONF:-} ) - - # Support the Apache2 extras, they must be set globally for all - # SAPIs to work correctly, especially for external PHP extensions - - mkdir -p "${WORKDIR}/sapis-build" || die - for one_sapi in $SAPIS ; do - use "${one_sapi}" || continue - php_set_ini_dir "${one_sapi}" - - # The BUILD_DIR variable is used to determine where to output - # the files that autotools creates. This was all originally - # based on the autotools-utils eclass. - BUILD_DIR="${WORKDIR}/sapis-build/${one_sapi}" - cp -r "${S}" "${BUILD_DIR}" || die - cd "${BUILD_DIR}" || die - - local sapi_conf=( - --with-config-file-path="${PHP_INI_DIR}" - --with-config-file-scan-dir="${PHP_EXT_INI_DIR_ACTIVE}" - ) - - for sapi in $SAPIS ; do - case "$sapi" in - cli|cgi|embed|fpm|phpdbg) - if [[ "${one_sapi}" == "${sapi}" ]] ; then - sapi_conf+=( "--enable-${sapi}" ) - else - sapi_conf+=( "--disable-${sapi}" ) - fi - ;; - - apache2) - if [[ "${one_sapi}" == "${sapi}" ]] ; then - sapi_conf+=( --with-apxs2="${EPREFIX}/usr/sbin/apxs" ) - else - sapi_conf+=( --without-apxs2 ) - fi - ;; - esac - done - - # Construct the $myeconfargs array by concatenating $our_conf - # (the common args) and $sapi_conf (the SAPI-specific args). - local myeconfargs=( "${our_conf[@]}" ) - myeconfargs+=( "${sapi_conf[@]}" ) - - pushd "${BUILD_DIR}" > /dev/null || die - econf "${myeconfargs[@]}" - popd > /dev/null || die - done -} - -src_compile() { - # snmp seems to run during src_compile, too (bug #324739) - addpredict /usr/share/snmp/mibs/.index - addpredict /var/lib/net-snmp/mib_indexes - - for sapi in ${SAPIS} ; do - if use "${sapi}"; then - cd "${WORKDIR}/sapis-build/$sapi" || \ - die "Failed to change dir to ${WORKDIR}/sapis-build/$1" - emake - fi - done -} - -src_install() { - # see bug #324739 for what happens when we don't have that - addpredict /usr/share/snmp/mibs/.index - - # grab the first SAPI that got built and install common files from there - local first_sapi="" - for sapi in $SAPIS ; do - if use $sapi ; then - first_sapi=$sapi - break - fi - done - - # Makefile forgets to create this before trying to write to it... - dodir "${PHP_DESTDIR#${EPREFIX}}/bin" - - # Install php environment (without any sapis) - cd "${WORKDIR}/sapis-build/$first_sapi" || die - emake INSTALL_ROOT="${D}" \ - install-build install-headers install-programs - - local extension_dir="$("${ED}/${PHP_DESTDIR#${EPREFIX}}/bin/php-config" --extension-dir)" - - # Create the directory where we'll put version-specific php scripts - keepdir "/usr/share/php${PHP_MV}" - - local sapi="", file="" - local sapi_list="" - - for sapi in ${SAPIS}; do - if use "${sapi}" ; then - einfo "Installing SAPI: ${sapi}" - cd "${WORKDIR}/sapis-build/${sapi}" || die - - if [[ "${sapi}" == "apache2" ]] ; then - # We're specifically not using emake install-sapi as libtool - # may cause unnecessary relink failures (see bug #351266) - insinto "${PHP_DESTDIR#${EPREFIX}}/apache2/" - newins ".libs/libphp${PHP_MV}$(get_libname)" \ - "libphp${PHP_MV}$(get_libname)" - keepdir "/usr/$(get_libdir)/apache2/modules" - else - # needed each time, php_install_ini would reset it - local dest="${PHP_DESTDIR#${EPREFIX}}" - into "${dest}" - case "$sapi" in - cli) - source="sapi/cli/php" - ;; - cgi) - source="sapi/cgi/php-cgi" - ;; - fpm) - source="sapi/fpm/php-fpm" - ;; - embed) - source="libs/libphp${PHP_MV}$(get_libname)" - ;; - phpdbg) - source="sapi/phpdbg/phpdbg" - ;; - *) - die "unhandled sapi in src_install" - ;; - esac - - if [[ "${source}" == *"$(get_libname)" ]]; then - dolib.so "${source}" - else - dobin "${source}" - local name="$(basename ${source})" - dosym "${dest}/bin/${name}" "/usr/bin/${name}${SLOT}" - fi - fi - - php_install_ini "${sapi}" - - # construct correct SAPI string for php-config - # thanks to ferringb for the bash voodoo - if [[ "${sapi}" == "apache2" ]]; then - sapi_list="${sapi_list:+${sapi_list} }apache2handler" - else - sapi_list="${sapi_list:+${sapi_list} }${sapi}" - fi - fi - done - - # Installing opcache module - if use_if_iuse opcache ; then - dolib.so "modules/opcache$(get_libname)" - fi - - # Install env.d files - newenvd "${FILESDIR}/20php5-envd" "20php${SLOT}" - sed -e "s|/lib/|/$(get_libdir)/|g" -i "${ED}/etc/env.d/20php${SLOT}" || die - sed -e "s|php5|php${SLOT}|g" -i "${ED}/etc/env.d/20php${SLOT}" || die - - # set php-config variable correctly (bug #278439) - sed -e "s:^\(php_sapis=\)\".*\"$:\1\"${sapi_list}\":" -i \ - "${ED}/usr/$(get_libdir)/php${SLOT}/bin/php-config" || die - - if use fpm ; then - if use systemd; then - systemd_newunit "${FILESDIR}/php-fpm_at.service" \ - "php-fpm@${SLOT}.service" - else - systemd_newunit "${FILESDIR}/php-fpm_at-simple.service" \ - "php-fpm@${SLOT}.service" - fi - fi -} - -src_test() { - echo ">>> Test phase [test]: ${CATEGORY}/${PF}" - PHP_BIN="${WORKDIR}/sapis-build/cli/sapi/cli/php" - if [[ ! -x "${PHP_BIN}" ]] ; then - ewarn "Test phase requires USE=cli, skipping" - return - else - export TEST_PHP_EXECUTABLE="${PHP_BIN}" - fi - - if [[ -x "${WORKDIR}/sapis/cgi/php-cgi" ]] ; then - export TEST_PHP_CGI_EXECUTABLE="${WORKDIR}/sapis/cgi/php-cgi" - fi - - REPORT_EXIT_STATUS=1 "${TEST_PHP_EXECUTABLE}" -n -d \ - "session.save_path=${T}" \ - "${WORKDIR}/sapis-build/cli/run-tests.php" -n -q -d \ - "session.save_path=${T}" - - for name in ${EXPECTED_TEST_FAILURES}; do - mv "${name}.out" "${name}.out.orig" 2>/dev/null || die - done - - local failed="$(find -name '*.out')" - if [[ ${failed} != "" ]] ; then - ewarn "The following test cases failed unexpectedly:" - for name in ${failed}; do - ewarn " ${name/.out/}" - done - else - einfo "No unexpected test failures, all fine" - fi - - if [[ ${PHP_SHOW_UNEXPECTED_TEST_PASS} == "1" ]] ; then - local passed="" - for name in ${EXPECTED_TEST_FAILURES}; do - [[ -f "${name}.diff" ]] && continue - passed="${passed} ${name}" - done - if [[ ${passed} != "" ]] ; then - einfo "The following test cases passed unexpectedly:" - for name in ${passed}; do - ewarn " ${passed}" - done - else - einfo "None of the known-to-fail tests passed, all fine" - fi - fi -} - -pkg_postinst() { - # Output some general info to the user - if use apache2 ; then - APACHE2_MOD_DEFINE="PHP" - APACHE2_MOD_CONF="70_mod_php" # Provided by app-eselect/eselect-php - apache-module_pkg_postinst - fi - - # Create the symlinks for php - for m in ${SAPIS}; do - [[ ${m} == 'embed' ]] && continue; - if use $m ; then - local ci=$(eselect php show $m) - if [[ -z $ci ]]; then - eselect php set $m php${SLOT} || die - einfo "Switched ${m} to use php:${SLOT}" - einfo - elif [[ $ci != "php${SLOT}" ]] ; then - elog "To switch $m to use php:${SLOT}, run" - elog " eselect php set $m php${SLOT}" - elog - fi - fi - done - - # Remove dead symlinks for SAPIs that were just disabled. For - # example, if the user has the cgi SAPI enabled, then he has an - # eselect-php symlink for it. If he later reinstalls PHP with - # USE="-cgi", that symlink will break. This call to eselect is - # supposed to remove that dead link per bug 572436. - eselect php cleanup || die - - if ! has "php${SLOT/./-}" ${PHP_TARGETS}; then - elog "To build extensions for this version of PHP, you will need to" - elog "add php${SLOT/./-} to your PHP_TARGETS USE_EXPAND variable." - elog - fi - - # Only mention PHP_INI_VERSION if the user doesn't have it set. - case "${PHP_INI_VERSION}" in - production|development) - ;; - *) - elog "This ebuild installed a version of php.ini based on" - elog "${PHP_INI_UPSTREAM}. You can choose which version of" - elog "php.ini to install by default by setting PHP_INI_VERSION" - elog "to either 'production' or 'development' in your make.conf." - elog "Both versions of php.ini can be found with the PHP docs in" - elog "${EPREFIX}/usr/share/doc/${PF}" - elog - ;; - esac - - elog "For details on how version slotting works, please see" - elog "the wiki:" - elog - elog " https://wiki.gentoo.org/wiki/PHP" - elog -} - -pkg_postrm() { - # This serves two purposes. First, if we have just removed the last - # installed version of PHP, then this will remove any dead symlinks - # belonging to eselect-php. Second, if a user upgrades slots from - # (say) 5.6 to 7.0 and depcleans the old slot, then this will update - # his existing symlinks to point to the new 7.0 installation. The - # latter is bug 432962. - # - # Note: the eselect-php package may not be installed at this point, - # so we can't die() if this command fails. - eselect php cleanup -} -- cgit v1.2.3-65-gdbad