net-misc/sks: Clean up old versions

Package-Manager: portage-2.2.27

2 files changed, 0 insertions, 235 deletions

diff --git a/net-misc/sks/sks-1.1.5-r1.ebuild b/net-misc/sks/sks-1.1.5-r1.ebuild
deleted file mode 100644
index f304141e86cd..000000000000
--- a/net-misc/sks/sks-1.1.5-r1.ebuild
+++ /dev/null
@@ -1,117 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=5
-
-inherit multilib user readme.gentoo systemd
-
-DESCRIPTION="An OpenPGP keyserver which is decentralized and provides highly reliable synchronization"
-HOMEPAGE="https://bitbucket.org/skskeyserver/sks-keyserver"
-SRC_URI="https://bitbucket.org/skskeyserver/sks-keyserver/downloads/${P}.tgz"
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 ~x86"
-IUSE="optimize test"
-DOC_CONTENTS="To get sks running, first build the database,
-start the databse, import atleast one key, then
-run a cleandb. See the sks man page for more information
-Typical DB_CONFIG file and sksconf has been installed
-in /var/lib/sks and can be used as templates by renaming
-to remove the .typical extension. The DB_CONFIG file has
-to be in place before doing the database build, or the BDB
-environment has to be manually cleared from both KDB and PTree.
-The same applies if you are upgrading to this version with an existing KDB/Ptree,
-using another version of BDB than 4.8; you need to clear the environment
-using e.g. db4.6_recover -h . and db4.6_checkpoint -1h . in both KDB and PTree
-Additionally a sample web interface has been installed as
-web.typical in /var/lib/sks that can be used by renaming it to web
-Important: It is strongly recommended to set up SKS behind a
-reverse proxy. Instructions on properly configuring SKS can be
-found at https://bitbucket.org/skskeyserver/sks-keyserver/wiki/Peering"
-
-DEPEND="dev-lang/ocaml
-	dev-ml/cryptokit
-	sys-libs/db:4.8"
-RDEPEND="${DEPEND}"
-
-pkg_setup() {
-	ebegin "Creating named group and user"
-	enewgroup sks
-	enewuser sks -1 -1 /var/lib/sks sks
-}
-
-src_prepare() {
-	cp Makefile.local.unused Makefile.local || die
-	sed -i \
-		-e "s:^BDBLIB=.*$:BDBLIB=-L/usr/$(get_libdir):g" \
-		-e "s:^BDBINCLUDE=.*$:BDBINCLUDE=-I/usr/include/db4.8/:g" \
-		-e "s:^LIBDB=.*$:LIBDB=-ldb-4.8:g" \
-		-e "s:^PREFIX=.*$:PREFIX=${D}/usr:g" \
-		-e "s:^MANDIR=.*$:MANDIR=${D}/usr/share/man:g" \
-		Makefile.local || die
-	sed -i \
-		-e 's:^CAMLINCLUDE= -I lib -I bdb$:CAMLINCLUDE= -I lib -I bdb -I +cryptokit:g' \
-		-e 's:-Werror-implicit-function-declaration::g' \
-		Makefile bdb/Makefile || die
-	sed -i \
-		-e 's:/usr/sbin/sks:/usr/bin/sks:g' \
-		sks_build.sh || die
-
-	epatch "${FILESDIR}/${P}-eddsa.patch"
-	epatch "${FILESDIR}/${P}-disable-warn-error-a.patch"
-}
-
-src_compile() {
-	emake dep
-	# sks build fails with paralell build in module Bdb
-	emake -j1 all
-	if use optimize; then
-		emake all.bc
-	fi
-}
-
-src_test() {
-	./sks unit_test || die
-}
-
-src_install() {
-	if use optimize; then
-		emake install.bc
-		dosym /usr/bin/sks.bc usr/bin/sks
-		dosym /usr/bin/sks_add_mail.bc usr/bin/sks_add_mail
-	else
-		emake install
-	fi
-
-	dodoc README.md
-
-	newinitd "${FILESDIR}/sks-db.initd" sks-db
-	newinitd "${FILESDIR}/sks-recon.initd" sks-recon
-	newconfd "${FILESDIR}/sks.confd" sks
-	systemd_dounit "${FILESDIR}"/sks-db.service
-	systemd_dounit "${FILESDIR}"/sks-recon.service
-
-	dodir "/var/lib/sks/web.typical"
-	insinto /var/lib/sks
-	newins sampleConfig/DB_CONFIG DB_CONFIG.typical
-	newins sampleConfig/sksconf.typical sksconf.typical
-	insinto /var/lib/sks/web.typical
-	doins sampleWeb/HTML5/*
-
-	keepdir /var/lib/sks
-	readme.gentoo_create_doc
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-
-	if [[ -n ${REPLACING_VERSIONS} ]]; then
-		einfo "Note when upgrading from versions of SKS earlier than 1.1.4"
-		einfo "The default values for pagesize settings have changed. To continue"
-		einfo "using an existing DB without rebuilding, explicit settings have to be"
-		einfo "added to the sksconf file."
-		einfo "pagesize:       4"
-		einfo "ptree_pagesize: 1"
-	fi;
-}
diff --git a/net-misc/sks/sks-1.1.5-r2.ebuild b/net-misc/sks/sks-1.1.5-r2.ebuild
deleted file mode 100644
index 4aa095cb09ef..000000000000
--- a/net-misc/sks/sks-1.1.5-r2.ebuild
+++ /dev/null
@@ -1,118 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-EAPI=5
-
-inherit multilib user readme.gentoo systemd
-
-DESCRIPTION="An OpenPGP keyserver which is decentralized and provides highly reliable synchronization"
-HOMEPAGE="https://bitbucket.org/skskeyserver/sks-keyserver"
-SRC_URI="https://bitbucket.org/skskeyserver/sks-keyserver/downloads/${P}.tgz"
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~x86"
-IUSE="optimize test"
-DOC_CONTENTS="To get sks running, first build the database,
-start the databse, import atleast one key, then
-run a cleandb. See the sks man page for more information
-Typical DB_CONFIG file and sksconf has been installed
-in /var/lib/sks and can be used as templates by renaming
-to remove the .typical extension. The DB_CONFIG file has
-to be in place before doing the database build, or the BDB
-environment has to be manually cleared from both KDB and PTree.
-The same applies if you are upgrading to this version with an existing KDB/Ptree,
-using another version of BDB than 4.8; you need to clear the environment
-using e.g. db4.6_recover -h . and db4.6_checkpoint -1h . in both KDB and PTree
-Additionally a sample web interface has been installed as
-web.typical in /var/lib/sks that can be used by renaming it to web
-Important: It is strongly recommended to set up SKS behind a
-reverse proxy. Instructions on properly configuring SKS can be
-found at https://bitbucket.org/skskeyserver/sks-keyserver/wiki/Peering"
-
-DEPEND="dev-lang/ocaml
-	dev-ml/cryptokit
-	sys-libs/db:4.8"
-RDEPEND="${DEPEND}"
-
-pkg_setup() {
-	ebegin "Creating named group and user"
-	enewgroup sks
-	enewuser sks -1 -1 /var/lib/sks sks
-}
-
-src_prepare() {
-	cp Makefile.local.unused Makefile.local || die
-	sed -i \
-		-e "s:^BDBLIB=.*$:BDBLIB=-L/usr/$(get_libdir):g" \
-		-e "s:^BDBINCLUDE=.*$:BDBINCLUDE=-I/usr/include/db4.8/:g" \
-		-e "s:^LIBDB=.*$:LIBDB=-ldb-4.8:g" \
-		-e "s:^PREFIX=.*$:PREFIX=${D}/usr:g" \
-		-e "s:^MANDIR=.*$:MANDIR=${D}/usr/share/man:g" \
-		Makefile.local || die
-	sed -i \
-		-e 's:^CAMLINCLUDE= -I lib -I bdb$:CAMLINCLUDE= -I lib -I bdb -I +cryptokit:g' \
-		-e 's:-Werror-implicit-function-declaration::g' \
-		Makefile bdb/Makefile || die
-	sed -i \
-		-e 's:/usr/sbin/sks:/usr/bin/sks:g' \
-		sks_build.sh || die
-
-	epatch "${FILESDIR}/${P}-eddsa.patch"
-	epatch "${FILESDIR}/${P}-disable-warn-error-a.patch"
-	epatch "${FILESDIR}/${P}-curve25519.patch"
-}
-
-src_compile() {
-	emake dep
-	# sks build fails with paralell build in module Bdb
-	emake -j1 all
-	if use optimize; then
-		emake all.bc
-	fi
-}
-
-src_test() {
-	./sks unit_test || die
-}
-
-src_install() {
-	if use optimize; then
-		emake install.bc
-		dosym /usr/bin/sks.bc usr/bin/sks
-		dosym /usr/bin/sks_add_mail.bc usr/bin/sks_add_mail
-	else
-		emake install
-	fi
-
-	dodoc README.md
-
-	newinitd "${FILESDIR}/sks-db.initd" sks-db
-	newinitd "${FILESDIR}/sks-recon.initd" sks-recon
-	newconfd "${FILESDIR}/sks.confd" sks
-	systemd_dounit "${FILESDIR}"/sks-db.service
-	systemd_dounit "${FILESDIR}"/sks-recon.service
-
-	dodir "/var/lib/sks/web.typical"
-	insinto /var/lib/sks
-	newins sampleConfig/DB_CONFIG DB_CONFIG.typical
-	newins sampleConfig/sksconf.typical sksconf.typical
-	insinto /var/lib/sks/web.typical
-	doins sampleWeb/HTML5/*
-
-	keepdir /var/lib/sks
-	readme.gentoo_create_doc
-}
-
-pkg_postinst() {
-	readme.gentoo_print_elog
-
-	if [[ -n ${REPLACING_VERSIONS} ]]; then
-		einfo "Note when upgrading from versions of SKS earlier than 1.1.4"
-		einfo "The default values for pagesize settings have changed. To continue"
-		einfo "using an existing DB without rebuilding, explicit settings have to be"
-		einfo "added to the sksconf file."
-		einfo "pagesize:       4"
-		einfo "ptree_pagesize: 1"
-	fi;
-}