diff options
Diffstat (limited to 'net-ftp/pure-ftpd/files')
| -rw-r--r-- | net-ftp/pure-ftpd/files/pure-ftpd-1.0.28-pam.patch | 20 | ||||
| -rw-r--r-- | net-ftp/pure-ftpd/files/pure-ftpd.conf_d-3 | 90 | ||||
| -rw-r--r-- | net-ftp/pure-ftpd/files/pure-ftpd.rc11 | 77 | ||||
| -rw-r--r-- | net-ftp/pure-ftpd/files/pure-ftpd.xinetd | 13 |
4 files changed, 200 insertions, 0 deletions
diff --git a/net-ftp/pure-ftpd/files/pure-ftpd-1.0.28-pam.patch b/net-ftp/pure-ftpd/files/pure-ftpd-1.0.28-pam.patch new file mode 100644 index 000000000000..209cd94dc566 --- /dev/null +++ b/net-ftp/pure-ftpd/files/pure-ftpd-1.0.28-pam.patch @@ -0,0 +1,20 @@ +--- src/log_pam.c ++++ src/log_pam.c +@@ -49,7 +49,7 @@ + # endif + + #ifndef FTPD_PAM_SERVICE_NAME +-# define FTPD_PAM_SERVICE_NAME "pure-ftpd" ++# define FTPD_PAM_SERVICE_NAME "ftp" + #endif + + /* Static variables used to communicate between the conversation function +@@ -164,7 +164,7 @@ + &PAM_conversation, &pamh); + PAM_BAIL; + # ifdef PAM_TTY +- (void) pam_set_item(pamh, PAM_TTY, "pure-ftpd"); ++ (void) pam_set_item(pamh, PAM_TTY, FTPD_PAM_SERVICE_NAME); + # endif + # ifdef PAM_RUSER + (void) pam_set_item(pamh, PAM_RUSER, user); diff --git a/net-ftp/pure-ftpd/files/pure-ftpd.conf_d-3 b/net-ftp/pure-ftpd/files/pure-ftpd.conf_d-3 new file mode 100644 index 000000000000..29b15a5a8928 --- /dev/null +++ b/net-ftp/pure-ftpd/files/pure-ftpd.conf_d-3 @@ -0,0 +1,90 @@ +# Config file for /etc/init.d/pure-ftpd +##Comment variables out to disable its features, or change the values in it... ## + +## This variable must be uncommented in order for the server to start ## +#IS_CONFIGURED="yes" + +## FTP Server,Port (separated by comma) ## +## If you prefer host names over IP addresses, it's your choice: +## SERVER="-S ftp.rtchat.com,21" +## IPv6 addresses are supported. +## !!! WARNING !!! +## Using an invalid IP will result in the server not starting, +## but reporting a correct start! +## SERVER="-S 192.168.0.1,21" +## By default binds to all available IPs. +SERVER="-S 21" + +## Number of simultaneous connections in total, and per IP ## +MAX_CONN="-c 30" +MAX_CONN_IP="-C 10" + +## Don't allow uploads if the partition is more full then this var ## +DISK_FULL="-k 90%" + +## If your FTP server is behind a NAT box, uncomment this ## +#USE_NAT="-N" + +## Authentication mechanisms (others are 'pam', ...) ## +## Further infos can be found in the README file. +AUTH="-l unix" + +## Change the maximum idle time (in minutes) ## +## If this variable is not defined, it will default to 15 minutes. +#TIMEOUT="-I <timeout>'" + +## Facility used for syslog logging ## +## If this variable is not defined, it will default to the 'ftp' facility. +## Logging can be disabled with '-f none'. +#LOG="-f <facility>" + +## Charset conversion support *experimental* ## +## Only works if USE "charconv" is enabled (only Pure-FTPd >=1.0.21). +## Set the charset of the filesystem. +# CHARCONV="--fscharset <charset>" + +## If you want to process each file uploaded through Pure-FTPd, enter the name +## of the script that should process the files below. +## man pure-uploadscript to learn more about how to write this script. +# UPLOADSCRIPT="/path/to/uploadscript" + +## Misc. Others ## +MISC_OTHER="-A -x -j -R -Z" + +# +# Use these inside $MISC_OTHER +# More can be found on "http://download.pureftpd.org/pub/pure-ftpd/doc/README" +# +# -A [ chroot() everyone, but root ] +# -e [ Only allow anonymous users ] +# -E [ Only allow authenticated users. Anonymous logins are prohibited. ] +# -i [ Disallow upload for anonymous users, whatever directory perms are ] +# -j [ If the home directory of a user doesn't exist, auto-create it ] +# -M [ Allow anonymous users to create directories. ] +# -R [ Disallow users (even non-anonymous ones) usage of the CHMOD command ] +# -x [ In normal operation mode, authenticated users can read/write +# files beginning with a dot ('.'). Anonymous users can't, for security reasons +# (like changing banners or a forgotten .rhosts). When '-x' is used, authenticated +# users can download dot-files, but not overwrite/create them, even if they own +# them. ] +# -X [ This flag is identical to the previous one (writing +# dot-files is prohibited), but in addition, users can't even *read* files and +# directories beginning with a dot (like "cd .ssh"). ] +# -D [ List files beginning with a dot ('.') even when the client doesn't +# append the '-a' option to the list command. A workaround for badly +# configured FTP clients. ] +# -G [ Disallow renaming. ] +# -d [ Send various debugging messages to the syslog. ONLY for DEBUG ] +# -F <fortune file> [ Display a fortune cookie on login. Check the README file ] +# -H [ By default, fully-qualified host names are logged. The '-H' flag avoids host names resolution. ] + + +# Some filesystems don't like accesses being memory mapped. This happens for +# example with ftpwho on JFFS2 filesystems (bug #330563). If you happen to +# have such a filesystem on /var set TMPFS_MOUNT to "true". +TMPFS_MOUNT="false" + +# Special mount options (like nosuid or nodev) for the tmpfs mount can be added +# here. Several options must be separated by comma: "nodev,nosuid" +#TMPFS_OPTS="" + diff --git a/net-ftp/pure-ftpd/files/pure-ftpd.rc11 b/net-ftp/pure-ftpd/files/pure-ftpd.rc11 new file mode 100644 index 000000000000..fe200cfb0f1a --- /dev/null +++ b/net-ftp/pure-ftpd/files/pure-ftpd.rc11 @@ -0,0 +1,77 @@ +#!/sbin/runscript +# Copyright 1999-2014 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Id$ + +ftpd_pidfile="/var/run/pure-ftpd.pid" +script_pidfile="/var/run/pure-uploadscript.pid" +ftpd_rundir="/var/lib/run/pure-ftpd" +daemon="/usr/sbin/pure-ftpd" +script_daemon="/usr/sbin/pure-uploadscript" + +depend() { + need net +} + +checkconfig() { + if [ -z "$IS_CONFIGURED" ] ; then + eerror "You need to setup /etc/conf.d/pure-ftpd first!" + return 1 + fi +} + +start() { + checkconfig || return 1 + + UPSCRIPT="" + if [ -n "$UPLOADSCRIPT" ] ; then + UPSCRIPT="--uploadscript" + fi + + FTPD_CONFIG="$SERVER $MAX_CONN $MAX_CONN_IP $DISK_FULL $USE_NAT $AUTH + $LOG $TIMEOUT $CHARCONV $MISC_OTHER $UPSCRIPT" + + WAIT="--wait 100" + + if ${TMPFS_MOUNT:-false} && grep -q tmpfs /proc/filesystems ; then + [ -n "${TMPFS_OPTS}" ] && MOUNT_OPTS="-o ${TMPFS_OPTS}" + einfo "Mounting tmpfs on ${ftpd_rundir}" + mount ${MOUNT_OPTS} -t tmpfs tmpfs ${ftpd_rundir} \ + || eerror "Unable to mount tmpfs" + fi + + ebegin "Starting Pure-FTPd" + start-stop-daemon --start --quiet --pidfile ${ftpd_pidfile} \ + --make-pidfile --background --exec /usr/sbin/pure-ftpd ${WAIT} \ + -- $(echo ${FTPD_CONFIG} | sed 's@\([[:space:]]\+\|^\)-B\([[:space:]]\+\|$\)@\1@g') + result=$? + if [ $result -ne 0 ] ; then + eend 1 "Could not launch Pure-FTPd" + else + eend $result + if [ -n "$UPLOADSCRIPT" ] ; then + ebegin "Starting Pure-FTPd upload script" + start-stop-daemon --start --quiet --make-pidfile \ + --pidfile ${script_pidfile} \ + --exec ${script_daemon} --background ${WAIT} \ + -- -r $UPLOADSCRIPT + eend $? + fi + fi +} + +stop() { + if [ -n "$UPLOADSCRIPT" ] ; then + ebegin "Stopping Pure-FTPd upload script" + start-stop-daemon --stop --retry 20 --quiet \ + --pidfile ${script_pidfile} + eend $? + fi + ebegin "Stopping Pure-FTPd" + start-stop-daemon --stop --retry 20 --quiet --pidfile ${ftpd_pidfile} + eend $? + + if ${TMPFS_MOUNT:-false} && mount | grep -q ${ftpd_rundir} ; then + umount ${ftpd_rundir} >/dev/null 2>&1 + fi +} diff --git a/net-ftp/pure-ftpd/files/pure-ftpd.xinetd b/net-ftp/pure-ftpd/files/pure-ftpd.xinetd new file mode 100644 index 000000000000..11022e6fde8d --- /dev/null +++ b/net-ftp/pure-ftpd/files/pure-ftpd.xinetd @@ -0,0 +1,13 @@ +# +# Pure-FTPd FTP daemon - http://www.pureftpd.org +# +service ftp +{ + socket_type = stream + wait = no + user = root + server = /usr/sbin/pure-ftpd + server_args = -s -a 42 + protocol = tcp + disable = yes +} |