From 451cbc767eab1cd57bc32c875170f8703fd584db Mon Sep 17 00:00:00 2001 From: Michał Górny Date: Sat, 25 Jun 2016 09:19:51 +0200 Subject: app-misc/g15daemon: Convert to python-r1 --- app-misc/g15daemon/g15daemon-1.9.5.3-r13.ebuild | 161 +++++++++++++++++++++++ app-misc/g15daemon/g15daemon-1.9.5.3-r21.ebuild | 163 ++++++++++++++++++++++++ app-misc/g15daemon/g15daemon-9999.ebuild | 32 ++--- 3 files changed, 332 insertions(+), 24 deletions(-) create mode 100644 app-misc/g15daemon/g15daemon-1.9.5.3-r13.ebuild create mode 100644 app-misc/g15daemon/g15daemon-1.9.5.3-r21.ebuild (limited to 'app-misc') diff --git a/app-misc/g15daemon/g15daemon-1.9.5.3-r13.ebuild b/app-misc/g15daemon/g15daemon-1.9.5.3-r13.ebuild new file mode 100644 index 000000000000..ff12695c48d0 --- /dev/null +++ b/app-misc/g15daemon/g15daemon-1.9.5.3-r13.ebuild @@ -0,0 +1,161 @@ +# Copyright 1999-2016 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Id$ + +EAPI=5 + +PYTHON_COMPAT=( python2_7 ) +GENTOO_DEPEND_ON_PERL="no" + +inherit eutils linux-info perl-module python-r1 base + +DESCRIPTION="G15daemon takes control of the G15 keyboard, through the linux kernel uinput device driver" +HOMEPAGE="http://g15daemon.sourceforge.net/" +SRC_URI="mirror://sourceforge/${PN}/${P}.tar.gz" + +LICENSE="GPL-2" +SLOT="0" +KEYWORDS="~amd64 ~ppc ~ppc64 ~x86" +IUSE="perl python static-libs" + +DEPEND="virtual/libusb:0 + >=dev-libs/libg15-1.2.4 + >=dev-libs/libg15render-1.2 + perl? ( + dev-lang/perl + dev-perl/GDGraph + >=dev-perl/Inline-0.4 + ) + python? ( ${PYTHON_DEPS} )" +RDEPEND="${DEPEND}" +REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )" + +PATCHES=( + "${FILESDIR}/${P}-forgotten-open-mode.patch" + "${FILESDIR}/${P}-overflow-fix.patch" +) +uinput_check() { + ebegin "Checking for uinput support" + local rc=1 + linux_config_exists && linux_chkconfig_present INPUT_UINPUT + rc=$? + + if [[ $rc -ne 0 ]] ; then + eerror "To use g15daemon, you need to compile your kernel with uinput support." + eerror "Please enable uinput support in your kernel config, found at:" + eerror + eerror "Device Drivers -> Input Device ... -> Miscellaneous devices -> User level driver support." + eerror + eerror "Once enabled, you should have the /dev/input/uinput device." + eerror "g15daemon will not work without the uinput device." + fi +} + +pkg_setup() { + linux-info_pkg_setup + uinput_check +} + +src_unpack() { + unpack ${A} + if use perl; then + unpack "./${P}/lang-bindings/perl-G15Daemon-0.2.tar.gz" + fi + if use python; then + unpack "./${P}/lang-bindings/pyg15daemon-0.0.tar.bz2" + fi +} + +src_prepare() { + if use perl; then + perl-module_src_prepare + sed -i \ + -e '1i#!/usr/bin/perl' \ + "${S}"/contrib/testbindings.pl + else + # perl-module_src_prepare always calls base_src_prepare + base_src_prepare + fi +} + +src_configure() { + econf \ + --docdir="${EPREFIX}/usr/share/doc/${PF}" \ + $(use_enable static-libs static) + + if use perl; then + cd "${WORKDIR}/G15Daemon-0.2" + perl-module_src_configure + fi +} + +src_compile() { + default + + if use perl; then + cd "${WORKDIR}/G15Daemon-0.2" + perl-module_src_compile + fi +} + +src_install() { + default + + find "${ED}" -name '*.la' -exec rm -f {} + + + # remove odd docs installed my make + rm "${ED}/usr/share/doc/${PF}/"{LICENSE,README.usage} + + insinto /usr/share/${PN}/contrib + doins contrib/xmodmaprc + doins contrib/xmodmap.sh + if use perl; then + doins contrib/testbindings.pl + fi + + newconfd "${FILESDIR}/${PN}-1.2.7.confd" ${PN} + newinitd "${FILESDIR}/${PN}-1.9.5.3.initd" ${PN} + dobin "${FILESDIR}/g15daemon-hotplug" + insinto /lib/udev/rules.d + doins "${FILESDIR}/99-g15daemon.rules" + + insinto /etc + doins "${FILESDIR}"/g15daemon.conf + + # Gentoo bug #301340, debian bug #611649 + exeinto /usr/lib/pm-utils/sleep.d + doexe "${FILESDIR}"/20g15daemon + + if use perl; then + ebegin "Installing Perl Bindings (G15Daemon.pm)" + cd "${WORKDIR}/G15Daemon-0.2" + docinto perl + perl-module_src_install + fi + + if use python; then + ebegin "Installing Python Bindings (g15daemon.py)" + cd "${WORKDIR}/pyg15daemon" + + python_foreach_impl python_domodule g15daemon.py + + docinto python + dodoc AUTHORS + fi +} + +pkg_postinst() { + elog "To use g15daemon, you need to add g15daemon to the default runlevel." + elog "This can be done with:" + elog "# /sbin/rc-update add g15daemon default" + elog "You can edit some g15daemon options at /etc/conf.d/g15daemon" + elog "" + elog "To have all new keys working in X11, you'll need create a " + elog "specific xmodmap in your home directory or edit the existent one." + elog "" + elog "Create the xmodmap:" + elog "cp /usr/share/g15daemon/contrib/xmodmaprc ~/.Xmodmap" + elog "" + elog "Adding keycodes to an existing xmodmap:" + elog "cat /usr/share/g15daemon/contrib/xmodmaprc >> ~/.Xmodmap" +} diff --git a/app-misc/g15daemon/g15daemon-1.9.5.3-r21.ebuild b/app-misc/g15daemon/g15daemon-1.9.5.3-r21.ebuild new file mode 100644 index 000000000000..9149ee0898e8 --- /dev/null +++ b/app-misc/g15daemon/g15daemon-1.9.5.3-r21.ebuild @@ -0,0 +1,163 @@ +# Copyright 1999-2016 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 +# $Id$ + +EAPI=5 + +PYTHON_COMPAT=( python2_7 ) +GENTOO_DEPEND_ON_PERL="no" + +inherit eutils linux-info perl-module python-r1 base + +DESCRIPTION="G15daemon takes control of the G15 keyboard, through the linux kernel uinput device driver" +HOMEPAGE="http://g15daemon.sourceforge.net/" +SRC_URI="mirror://sourceforge/${PN}/${P}.tar.gz" + +LICENSE="GPL-2" +SLOT="0" +KEYWORDS="" +IUSE="perl python static-libs" + +DEPEND="virtual/libusb:0 + >=dev-libs/libg15-9999 + >=dev-libs/libg15render-1.2 + perl? ( + dev-lang/perl + dev-perl/GDGraph + >=dev-perl/Inline-0.4 + ) + python? ( ${PYTHON_DEPS} )" +RDEPEND="${DEPEND}" +REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )" + +PATCHES=( + "${FILESDIR}/${P}-forgotten-open-mode.patch" + "${FILESDIR}/${P}-overflow-fix.patch" + "${FILESDIR}/${P}-g510-keys.patch" +) + +uinput_check() { + ebegin "Checking for uinput support" + local rc=1 + linux_config_exists && linux_chkconfig_present INPUT_UINPUT + rc=$? + + if [[ $rc -ne 0 ]] ; then + eerror "To use g15daemon, you need to compile your kernel with uinput support." + eerror "Please enable uinput support in your kernel config, found at:" + eerror + eerror "Device Drivers -> Input Device ... -> Miscellaneous devices -> User level driver support." + eerror + eerror "Once enabled, you should have the /dev/input/uinput device." + eerror "g15daemon will not work without the uinput device." + fi +} + +pkg_setup() { + linux-info_pkg_setup + uinput_check +} + +src_unpack() { + unpack ${A} + if use perl; then + unpack "./${P}/lang-bindings/perl-G15Daemon-0.2.tar.gz" + fi + if use python; then + unpack "./${P}/lang-bindings/pyg15daemon-0.0.tar.bz2" + fi +} + +src_prepare() { + if use perl; then + perl-module_src_prepare + sed -i \ + -e '1i#!/usr/bin/perl' \ + "${S}"/contrib/testbindings.pl + else + # perl-module_src_prepare always calls base_src_prepare + base_src_prepare + fi +} + +src_configure() { + econf \ + --docdir="${EPREFIX}/usr/share/doc/${PF}" \ + $(use_enable static-libs static) + + if use perl; then + cd "${WORKDIR}/G15Daemon-0.2" + perl-module_src_configure + fi +} + +src_compile() { + default + + if use perl; then + cd "${WORKDIR}/G15Daemon-0.2" + perl-module_src_compile + fi +} + +src_install() { + default + + find "${ED}" -name '*.la' -exec rm -f {} + + + # remove odd docs installed my make + rm "${ED}/usr/share/doc/${PF}/"{LICENSE,README.usage} + + insinto /usr/share/${PN}/contrib + doins contrib/xmodmaprc + doins contrib/xmodmap.sh + if use perl; then + doins contrib/testbindings.pl + fi + + newconfd "${FILESDIR}/${PN}-1.2.7.confd" ${PN} + newinitd "${FILESDIR}/${PN}-1.9.5.3.initd" ${PN} + dobin "${FILESDIR}/g15daemon-hotplug" + insinto /lib/udev/rules.d + doins "${FILESDIR}/99-g15daemon.rules" + + insinto /etc + doins "${FILESDIR}"/g15daemon.conf + + # Gentoo bug #301340, debian bug #611649 + exeinto /usr/lib/pm-utils/sleep.d + doexe "${FILESDIR}"/20g15daemon + + if use perl; then + ebegin "Installing Perl Bindings (G15Daemon.pm)" + cd "${WORKDIR}/G15Daemon-0.2" + docinto perl + perl-module_src_install + fi + + if use python; then + ebegin "Installing Python Bindings (g15daemon.py)" + cd "${WORKDIR}/pyg15daemon" + + python_foreach_impl python_domodule g15daemon.py + + docinto python + dodoc AUTHORS + fi +} + +pkg_postinst() { + elog "To use g15daemon, you need to add g15daemon to the default runlevel." + elog "This can be done with:" + elog "# /sbin/rc-update add g15daemon default" + elog "You can edit some g15daemon options at /etc/conf.d/g15daemon" + elog "" + elog "To have all new keys working in X11, you'll need create a " + elog "specific xmodmap in your home directory or edit the existent one." + elog "" + elog "Create the xmodmap:" + elog "cp /usr/share/g15daemon/contrib/xmodmaprc ~/.Xmodmap" + elog "" + elog "Adding keycodes to an existing xmodmap:" + elog "cat /usr/share/g15daemon/contrib/xmodmaprc >> ~/.Xmodmap" +} diff --git a/app-misc/g15daemon/g15daemon-9999.ebuild b/app-misc/g15daemon/g15daemon-9999.ebuild index e88188462f62..48d76e3efbe1 100644 --- a/app-misc/g15daemon/g15daemon-9999.ebuild +++ b/app-misc/g15daemon/g15daemon-9999.ebuild @@ -1,15 +1,15 @@ -# Copyright 1999-2014 Gentoo Foundation +# Copyright 1999-2016 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 # $Id$ EAPI=5 + +PYTHON_COMPAT=( python2_7 ) GENTOO_DEPEND_ON_PERL="no" -PYTHON_DEPEND="python? *" -SUPPORT_PYTHON_ABIS="1" ESVN_PROJECT=${PN}/trunk ESVN_REPO_URI="https://${PN}.svn.sourceforge.net/svnroot/${ESVN_PROJECT}/${PN}-wip" -inherit eutils linux-info perl-module python base subversion autotools +inherit eutils linux-info perl-module python-r1 base subversion autotools DESCRIPTION="G15daemon takes control of the G15 keyboard, through the linux kernel uinput device driver" HOMEPAGE="http://g15daemon.sourceforge.net/" @@ -27,8 +27,10 @@ DEPEND="virtual/libusb:0 dev-lang/perl dev-perl/GDGraph >=dev-perl/Inline-0.4 - )" + ) + python? ( ${PYTHON_DEPS} )" RDEPEND="${DEPEND}" +REQUIRED_USE="python? ( ${PYTHON_REQUIRED_USE} )" PATCHES=( "${FILESDIR}/${PN}-1.9.5.3-g510-keys.patch" @@ -56,9 +58,6 @@ uinput_check() { pkg_setup() { linux-info_pkg_setup uinput_check - if use python; then - python_pkg_setup - fi } src_unpack() { @@ -152,11 +151,7 @@ src_install() { ebegin "Installing Python Bindings (g15daemon.py)" cd "${WORKDIR}/pyg15daemon" - installation() { - insinto $(python_get_sitedir) - doins g15daemon.py - } - python_execute_function installation + python_foreach_impl python_domodule g15daemon.py docinto python dodoc AUTHORS @@ -164,11 +159,6 @@ src_install() { } pkg_postinst() { - if use python; then - python_mod_optimize g15daemon.py - echo "" - fi - elog "To use g15daemon, you need to add g15daemon to the default runlevel." elog "This can be done with:" elog "# /sbin/rc-update add g15daemon default" @@ -183,9 +173,3 @@ pkg_postinst() { elog "Adding keycodes to an existing xmodmap:" elog "cat /usr/share/g15daemon/contrib/xmodmaprc >> ~/.Xmodmap" } - -pkg_postrm() { - if use python; then - python_mod_cleanup g15daemon.py - fi -} -- cgit v1.2.3-18-g5258