From 7c920a1be3f8f839262ecd9ae17054671f9b443e Mon Sep 17 00:00:00 2001
From: Jakov Smolic <jakov.smolic@sartura.hr>
Date: Mon, 28 Dec 2020 15:15:35 +0100
Subject: dev-embedded/openocd: Sync live ebuild

Package-Manager: Portage-3.0.9, Repoman-3.0.1
Signed-off-by: Jakov Smolic <jakov.smolic@sartura.hr>
Signed-off-by: David Seifert <soap@gentoo.org>
---
 dev-embedded/openocd/openocd-9999.ebuild | 123 ++++++++++---------------------
 1 file changed, 40 insertions(+), 83 deletions(-)

(limited to 'dev-embedded')

diff --git a/dev-embedded/openocd/openocd-9999.ebuild b/dev-embedded/openocd/openocd-9999.ebuild
index 99592e57a118..f7d5c4b834cb 100644
--- a/dev-embedded/openocd/openocd-9999.ebuild
+++ b/dev-embedded/openocd/openocd-9999.ebuild
@@ -1,14 +1,13 @@
 # Copyright 1999-2020 Gentoo Authors
 # Distributed under the terms of the GNU General Public License v2
 
-EAPI="7"
+EAPI=7
 
-inherit eutils multilib flag-o-matic toolchain-funcs udev
+inherit udev
 
-# One ebuild to rule them all
 if [[ ${PV} == *9999 ]] ; then
 	inherit autotools git-r3
-	EGIT_REPO_URI="https://git.code.sf.net/p/${PN}/code"
+	EGIT_REPO_URI="	https://repo.or.cz/openocd.git"
 else
 	MY_PV="${PV/_/-}"
 	MY_P="${PN}-${MY_PV}"
@@ -29,113 +28,71 @@ RDEPEND="
 	acct-group/plugdev
 	>=dev-lang/jimtcl-0.76:0=
 	cmsis-dap? ( dev-libs/hidapi )
-	jlink? ( >=dev-embedded/libjaylink-0.2 )
+	jlink? ( >=dev-embedded/libjaylink-0.2.0 )
 	usb? (
 		virtual/libusb:0
 		virtual/libusb:1
 	)
 	ftdi? ( dev-embedded/libftdi:= )"
 
-DEPEND="${RDEPEND}
+DEPEND="${RDEPEND}"
+BDEPEND="
+	sys-apps/texinfo
 	virtual/pkgconfig"
-[[ ${PV} == "9999" ]] && DEPEND+=" >=sys-apps/texinfo-5" #549946
 
 src_prepare() {
 	default
 
-	if [[ ${PV} == "9999" ]] ; then
+	if [[ ${PV} == *9999 ]] ; then
 		AT_NO_RECURSIVE=yes eautoreconf
 	fi
 }
 
 src_configure() {
-	# Here are some defaults
 	local myconf=(
-		--enable-buspirate
-		--disable-werror
-		--disable-internal-jimtcl
-		--disable-internal-libjaylink
 		--enable-amtjtagaccel
-		--enable-ep93xx
+		--enable-arm-jtag-ew
 		--enable-at91rm9200
+		--enable-bcm2835gpio
+		--enable-buspirate
+		--enable-ep93xx
 		--enable-gw16012
-		--enable-arm-jtag-ew
 		--enable-sysfsgpio
-		--enable-bcm2835gpio
+		--disable-internal-jimtcl
+		--disable-internal-libjaylink
+		--disable-werror
+		$(use_enable cmsis-dap)
+		$(use_enable dummy)
+		$(use_enable ftdi openjtag)
+		$(use_enable ftdi presto)
+		$(use_enable ftdi usb-blaster)
+		$(use_enable jlink)
+		$(use_enable parport)
+		$(use_enable parport parport_ppdev)
+		$(use_enable usb aice)
+		$(use_enable usb armjtagew)
+		$(use_enable usb ftdi)
+		$(use_enable usb osbdm)
+		$(use_enable usb opendous)
+		$(use_enable usb rlink)
+		$(use_enable usb stlink)
+		$(use_enable usb ti-icdi)
+		$(use_enable usb usbprog)
+		$(use_enable usb usb-blaster-2)
+		$(use_enable usb ulink)
+		$(use_enable usb vsllink)
+		$(use_enable verbose-io verbose-jtag-io)
+		$(use_enable verbose-io verbose-usb-io)
+		$(use_enable verbose-io verbose_usb_comms)
 	)
 
-	# Adapters requiring usb/libusb-1.X support
-	if use usb; then
-		myconf+=(
-			--enable-aice
-			--enable-usb-blaster-2
-			--enable-ftdi
-			--enable-ti-icdi
-			--enable-ulink
-			--enable-osbdm
-			--enable-opendous
-			--enable-usbprog
-			--enable-rlink
-			--enable-stlink
-			--enable-vsllink
-			--enable-armjtagew
-			$(use_enable verbose-io verbose-usb-io)
-			$(use_enable verbose-io verbose_usb_comms)
-		)
-	else
-		myconf+=(
-			--disable-aice
-			--disable-usb-blaster-2
-			--disable-ftdi
-			--disable-ti-icdi
-			--disable-ulink
-			--disable-osbdm
-			--disable-opendous
-			--disable-usbprog
-			--disable-rlink
-			--disable-stlink
-			--disable-vsllink
-			--disable-armjtagew
-		)
-	fi
-
-	if use jlink; then
-		myconf+=(
-			--enable-jlink
-		)
-	else
-		myconf+=(
-			--disable-jlink
-		)
-	fi
-
-	if use ftdi; then
-		myconf+=(
-			--enable-usb-blaster
-			--enable-openjtag
-			--enable-presto
-		)
-	else
-		myconf+=(
-			--disable-openjtag
-			--disable-presto
-			--disable-usb-blaster
-		)
-	fi
-
-	econf \
-		$(use_enable dummy) \
-		$(use_enable cmsis-dap) \
-		$(use_enable parport) \
-		$(use_enable parport parport_ppdev) \
-		$(use_enable verbose-io verbose-jtag-io) \
-		"${myconf[@]}"
+	econf "${myconf[@]}"
 }
 
 src_install() {
 	default
 	dostrip /usr/bin
-	udev_dorules "${D}"/usr/share/${PN}/contrib/*.rules
+	udev_dorules "${ED}"/usr/share/${PN}/contrib/*.rules
 }
 
 pkg_postinst() {
-- 
cgit v1.2.3-65-gdbad