From 7cbcad959b92bafaca2bfd45eef5c65d86ec674d Mon Sep 17 00:00:00 2001 From: Lars Wendler Date: Mon, 23 Nov 2015 15:50:35 +0100 Subject: sys-boot/lilo: Removed old. Package-Manager: portage-2.2.25 Signed-off-by: Lars Wendler --- sys-boot/lilo/files/lilo-23.0-make.patch | 103 ------------------ sys-boot/lilo/lilo-23.2-r1.ebuild | 173 ------------------------------ sys-boot/lilo/lilo-24.0.ebuild | 176 ------------------------------- 3 files changed, 452 deletions(-) delete mode 100644 sys-boot/lilo/files/lilo-23.0-make.patch delete mode 100644 sys-boot/lilo/lilo-23.2-r1.ebuild delete mode 100644 sys-boot/lilo/lilo-24.0.ebuild (limited to 'sys-boot/lilo') diff --git a/sys-boot/lilo/files/lilo-23.0-make.patch b/sys-boot/lilo/files/lilo-23.0-make.patch deleted file mode 100644 index 00b15c52ca07..000000000000 --- a/sys-boot/lilo/files/lilo-23.0-make.patch +++ /dev/null @@ -1,103 +0,0 @@ ---- a/Makefile 2010-06-18 19:17:48.000000000 +0200 -+++ b/Makefile 2010-07-20 02:00:18.000000000 +0200 -@@ -26,19 +26,19 @@ - # everything needed to run, just short of installation - # - all: test -- make -C src all -+ $(MAKE) -C src all - - # - # everything above plus the statically linked version - # - alles: test -- make -C src alles -+ $(MAKE) -C src alles - - # - # documentation files - # - docs: -- make -C doc all -+ $(MAKE) -C doc all - - # - # if you have the 'bcc' compiler, then you can make the diagnostics, too -@@ -55,23 +55,23 @@ - @echo before you proceed from this point. - @echo "Press to continue, <^C> to abort ..." - @read -- @make -C src floppy1 -+ @$(MAKE) -C src floppy1 - @echo Done. - @echo - @echo Remove the floppy from the drive. Label it "\"1.6\"" - @echo "Press to continue, <^C> to abort ..." - @read -- @make -C src floppy2 -+ @$(MAKE) -C src floppy2 - @echo Done. - @echo - @echo Remove the floppy from the drive. Label it "\"2.4\"" - @echo - - diagnostic: test -- make -C src diagnostic -+ $(MAKE) -C src diagnostic - - dosexe: test -- make -C dos lilo -+ $(MAKE) -C dos lilo - - # - # test for compilers & utilities -@@ -85,33 +85,33 @@ - # shorthand install, if one knows that one has the 'bcc' compiler - # - ins: -- make -C src ins -+ $(MAKE) -C src ins - - # - # normal install, but doesn't make the diagnostic binaries - # - install: all -- make -C src install -- make -C man install -- make -C dos install -- make -C src insobs -+ $(MAKE) -C src install -+ $(MAKE) -C man install -+ $(MAKE) -C dos install -+ $(MAKE) -C src insobs - - tidy: -- make -C src tidy -- make -C diagnose tidy -- make -C dos tidy -- make -C doc tidy -+ $(MAKE) -C src tidy -+ $(MAKE) -C diagnose tidy -+ $(MAKE) -C dos tidy -+ $(MAKE) -C doc tidy - - clean: tidy - rm -f test.img -- make -C src clean -- make -C diagnose clean -- make -C dos clean -+ $(MAKE) -C src clean -+ $(MAKE) -C diagnose clean -+ $(MAKE) -C dos clean - - spotless: distclean - distclean: clean -- make -C src distclean -- make -C diagnose distclean -- make -C dos distclean -- make -C doc clean -+ $(MAKE) -C src distclean -+ $(MAKE) -C diagnose distclean -+ $(MAKE) -C dos distclean -+ $(MAKE) -C doc clean - diff --git a/sys-boot/lilo/lilo-23.2-r1.ebuild b/sys-boot/lilo/lilo-23.2-r1.ebuild deleted file mode 100644 index 84e2073d093e..000000000000 --- a/sys-boot/lilo/lilo-23.2-r1.ebuild +++ /dev/null @@ -1,173 +0,0 @@ -# Copyright 1999-2013 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -EAPI="2" - -inherit eutils flag-o-matic toolchain-funcs - -DOLILO_V="0.5" -IUSE="static minimal pxeserial device-mapper" - -DESCRIPTION="Standard Linux boot loader" -HOMEPAGE="https://alioth.debian.org/projects/lilo/" - -DOLILO_TAR="dolilo-${DOLILO_V}.tar.bz2" -SRC_URI=" - http://lilo.alioth.debian.org/ftp/sources/${P}.tar.gz - mirror://gentoo/${DOLILO_TAR} -" - -SLOT="0" -LICENSE="BSD GPL-2" -KEYWORDS="-* ~amd64 ~x86" - -DEPEND=">=sys-devel/bin86-0.15.5" -RDEPEND="device-mapper? ( >=sys-fs/lvm2-2.02.45 )" - -src_prepare() { - # this patch is needed when booting PXE and the device you're using - # emulates vga console via serial console. - # IE.. B.B.o.o.o.o.t.t.i.i.n.n.g.g....l.l.i.i.n.n.u.u.x.x and stair stepping. - use pxeserial && epatch "${FILESDIR}/${PN}-22.8-novga.patch" - - # Do not strip and have parallel make - # FIXME: images/Makefile does weird stuff - sed -i Makefile src/Makefile \ - -e '/strip/d;s|^ make| $(MAKE)|g' \ - -e '/images install/d' \ - -e '/images all/d' \ - || die "sed strip failed" -} - -src_compile() { - # lilo needs this. bug #140209 - export LC_ALL=C - - # hardened automatic PIC plus PIE building should be suppressed - # because of assembler instructions that cannot be compiled PIC - HARDENED_CFLAGS="`test-flags-CC -fno-pic -nopie`" - - # we explicitly prevent the custom CFLAGS for stability reasons - if use static; then - emake CC="$(tc-getCC) ${LDFLAGS} ${HARDENED_CFLAGS}" alles || die - else - emake CC="$(tc-getCC) ${LDFLAGS} ${HARDENED_CFLAGS}" all || die - fi -} - -src_install() { - keepdir /boot - emake DESTDIR="${D}" install || die - - if use !minimal; then - into / - dosbin "${WORKDIR}"/dolilo/dolilo || die - - into /usr - dosbin keytab-lilo.pl || die - - insinto /etc - newins "${FILESDIR}"/lilo.conf lilo.conf.example || die - - newconfd "${WORKDIR}"/dolilo/dolilo.conf.d dolilo.example || die - - dodoc CHANGELOG* readme/README.* readme/INCOMPAT README - docinto samples ; dodoc sample/* - fi -} - -# Check whether LILO is installed -# This function is from /usr/sbin/mkboot from debianutils, with copyright: -# -# Debian GNU/Linux -# Copyright 1996-1997 Guy Maor -# -# Modified for Gentoo for use with the lilo ebuild by: -# Martin Schlemmer (16 Mar 2003) -# -lilocheck() { - local bootpart= - local rootpart="$(mount | grep -v "tmpfs" | grep -v "rootfs" | grep "on / " | cut -f1 -d " ")" - - echo - einfon "Checking for LILO ..." - - if [ "$(whoami)" != "root" ] - then - echo; echo - eerror "Only root can check for LILO!" - return 1 - fi - - if [ -z "${rootpart}" ] - then - echo; echo - eerror "Could not determine root partition!" - return 1 - fi - - if [ ! -f /etc/lilo.conf -o ! -x /sbin/lilo ] - then - echo " No" - return 1 - fi - - bootpart="$(sed -n "s:^boot[ ]*=[ ]*\(.*\)[ ]*:\1:p" /etc/lilo.conf)" - - if [ -z "${bootpart}" ] - then - # lilo defaults to current root when 'boot=' is not present - bootpart="${rootpart}" - fi - - if ! dd if=${bootpart} ibs=16 count=1 2>&- | grep -q 'LILO' - then - echo; echo - ewarn "Yes, but I couldn't find a LILO signature on ${bootpart}" - ewarn "Check your /etc/lilo.conf, or run /sbin/lilo by hand." - return 1 - fi - - echo " Yes, on ${bootpart}" - - return 0 -} - -pkg_postinst() { - if [ ! -e "${ROOT}/boot/boot.b" -a ! -L "${ROOT}/boot/boot.b" ] - then - [ -f "${ROOT}/boot/boot-menu.b" ] && \ - ln -snf boot-menu.b "${ROOT}/boot/boot.b" - fi - - if [ "${ROOT}" = "/" ] && use !minimal; - then - if lilocheck - then - einfo "Running DOLILO to complete the install ..." - # do not redirect to /dev/null because it may display some input - # prompt - /sbin/dolilo - if [ "$?" -ne 0 ] - then - echo - ewarn "Running /sbin/dolilo failed! Please check what the problem is" - ewarn "before your next reboot." - - ebeep 5 - epause 5 - fi - fi - echo - fi - if use !minimal; then - echo - einfo "Issue 'dolilo' instead of 'lilo' to have a friendly wrapper that" - einfo "handles mounting and unmounting /boot for you. It can do more then" - einfo "that when asked, edit /etc/conf.d/dolilo to harness it's full potential." - ebeep 5 - epause 3 - echo - fi -} diff --git a/sys-boot/lilo/lilo-24.0.ebuild b/sys-boot/lilo/lilo-24.0.ebuild deleted file mode 100644 index 013415a6f5f5..000000000000 --- a/sys-boot/lilo/lilo-24.0.ebuild +++ /dev/null @@ -1,176 +0,0 @@ -# Copyright 1999-2014 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 -# $Id$ - -EAPI="5" - -inherit eutils flag-o-matic toolchain-funcs - -DOLILO_V="0.5" -IUSE="static minimal pxeserial device-mapper" - -DESCRIPTION="Standard Linux boot loader" -HOMEPAGE="https://alioth.debian.org/projects/lilo/" - -DOLILO_TAR="dolilo-${DOLILO_V}.tar.bz2" -SRC_URI=" - http://lilo.alioth.debian.org/ftp/sources/${P}.tar.gz - mirror://gentoo/${DOLILO_TAR} -" - -SLOT="0" -LICENSE="BSD GPL-2" -KEYWORDS="-* amd64 x86" - -DEPEND=">=sys-devel/bin86-0.15.5" -RDEPEND="device-mapper? ( >=sys-fs/lvm2-2.02.45 )" - -src_prepare() { - # this patch is needed when booting PXE and the device you're using - # emulates vga console via serial console. - # IE.. B.B.o.o.o.o.t.t.i.i.n.n.g.g....l.l.i.i.n.n.u.u.x.x and stair stepping. - use pxeserial && epatch "${FILESDIR}/${P}-novga.patch" - - # Do not strip and have parallel make - # FIXME: images/Makefile does weird stuff - sed -i Makefile src/Makefile \ - -e '/strip/d;s|^ make| $(MAKE)|g' \ - -e '/images install/d' \ - -e '/images all/d' \ - || die "sed strip failed" -} - -src_configure() { - if ! use device-mapper; then - sed -i make.vars -e 's|-DDEVMAPPER||g' || die - fi -} - -src_compile() { - # lilo needs this. bug #140209 - export LC_ALL=C - - # hardened automatic PIC plus PIE building should be suppressed - # because of assembler instructions that cannot be compiled PIC - HARDENED_CFLAGS=$(test-flags-CC -fno-pic -nopie) - - # we explicitly prevent the custom CFLAGS for stability reasons - if use static; then - local target=alles - else - local target=all - fi - - emake CC="$(tc-getCC) ${LDFLAGS} ${HARDENED_CFLAGS}" ${target} || die -} - -src_install() { - keepdir /boot - emake DESTDIR="${D}" install || die - - if use !minimal; then - into / - dosbin "${WORKDIR}"/dolilo/dolilo || die - - into /usr - dosbin keytab-lilo.pl || die - - insinto /etc - newins "${FILESDIR}"/lilo.conf lilo.conf.example || die - - newconfd "${WORKDIR}"/dolilo/dolilo.conf.d dolilo.example || die - - dodoc CHANGELOG* readme/README.* readme/INCOMPAT README - docinto samples ; dodoc sample/* - fi -} - -# Check whether LILO is installed -# This function is from /usr/sbin/mkboot from debianutils, with copyright: -# -# Debian GNU/Linux -# Copyright 1996-1997 Guy Maor -# -# Modified for Gentoo for use with the lilo ebuild by: -# Martin Schlemmer (16 Mar 2003) -# -lilocheck() { - local bootpart= - local rootpart="$(mount | grep -v "tmpfs" | grep -v "rootfs" | grep "on / " | cut -f1 -d " ")" - - echo - einfon "Checking for LILO ..." - - if [ "$(whoami)" != "root" ] - then - echo; echo - eerror "Only root can check for LILO!" - return 1 - fi - - if [ -z "${rootpart}" ] - then - echo; echo - eerror "Could not determine root partition!" - return 1 - fi - - if [ ! -f /etc/lilo.conf -o ! -x /sbin/lilo ] - then - echo " No" - return 1 - fi - - bootpart="$(sed -n "s:^boot[ ]*=[ ]*\(.*\)[ ]*:\1:p" /etc/lilo.conf)" - - if [ -z "${bootpart}" ] - then - # lilo defaults to current root when 'boot=' is not present - bootpart="${rootpart}" - fi - - if ! dd if=${bootpart} ibs=16 count=1 2>&- | grep -q 'LILO' - then - echo; echo - ewarn "Yes, but I couldn't find a LILO signature on ${bootpart}" - ewarn "Check your /etc/lilo.conf, or run /sbin/lilo by hand." - return 1 - fi - - echo " Yes, on ${bootpart}" - - return 0 -} - -pkg_postinst() { - if [ ! -e "${ROOT}/boot/boot.b" -a ! -L "${ROOT}/boot/boot.b" ] - then - [ -f "${ROOT}/boot/boot-menu.b" ] && \ - ln -snf boot-menu.b "${ROOT}/boot/boot.b" - fi - - if [ "${ROOT}" = "/" ] && use !minimal; - then - if lilocheck - then - einfo "Running DOLILO to complete the install ..." - # do not redirect to /dev/null because it may display some input - # prompt - /sbin/dolilo - if [ "$?" -ne 0 ] - then - echo - eerror "Running /sbin/dolilo failed! Please check what the problem is" - eerror "before your next reboot." - fi - fi - echo - fi - if use !minimal; then - echo - einfo "Issue 'dolilo' instead of 'lilo' to have a friendly wrapper that" - einfo "handles mounting and unmounting /boot for you. It can do more then" - einfo "that when asked, edit /etc/conf.d/dolilo to harness it's full potential." - echo - fi -} -- cgit v1.2.3-65-gdbad