# Copyright 1999-2015 Gentoo Foundation # Distributed under the terms of the GNU General Public License v2 # $Id$ # @ECLASS: kde4-base.eclass # @MAINTAINER: # kde@gentoo.org # @BLURB: This eclass provides functions for kde 4.X ebuilds # @DESCRIPTION: # The kde4-base.eclass provides support for building KDE4 based ebuilds # and KDE4 applications. # # NOTE: KDE 4 ebuilds currently support EAPI 5. This will be # reviewed over time as new EAPI versions are approved. if [[ -z ${_KDE4_BASE_ECLASS} ]]; then _KDE4_BASE_ECLASS=1 # @ECLASS-VARIABLE: KDE_SELINUX_MODULE # @DESCRIPTION: # If set to "none", do nothing. # For any other value, add selinux to IUSE, and depending on that useflag # add a dependency on sec-policy/selinux-${KDE_SELINUX_MODULE} to (R)DEPEND : ${KDE_SELINUX_MODULE:=none} # @ECLASS-VARIABLE: VIRTUALDBUS_TEST # @DESCRIPTION: # If defined, launch and use a private dbus session during src_test. # @ECLASS-VARIABLE: VIRTUALX_REQUIRED # @DESCRIPTION: # For proper description see virtualx.eclass manpage. # Here we redefine default value to be manual, if your package needs virtualx # for tests you should proceed with setting VIRTUALX_REQUIRED=test. : ${VIRTUALX_REQUIRED:=manual} inherit kde4-functions toolchain-funcs fdo-mime flag-o-matic gnome2-utils virtualx versionator eutils multilib if [[ ${KDE_BUILD_TYPE} = live ]]; then case ${KDE_SCM} in svn) inherit subversion ;; git) inherit git-r3 ;; esac fi # @ECLASS-VARIABLE: CMAKE_REQUIRED # @DESCRIPTION: # Specify if cmake buildsystem is being used. Possible values are 'always' and 'never'. # Please note that if it's set to 'never' you need to explicitly override following phases: # src_configure, src_compile, src_test and src_install. # Defaults to 'always'. : ${CMAKE_REQUIRED:=always} if [[ ${CMAKE_REQUIRED} = always ]]; then buildsystem_eclass="cmake-utils" export_fns="src_configure src_compile src_test src_install" fi # @ECLASS-VARIABLE: KDE_MINIMAL # @DESCRIPTION: # This variable is used when KDE_REQUIRED is set, to specify required KDE minimal # version for apps to work. Currently defaults to 4.4 # One may override this variable to raise version requirements. # Note that it is fixed to ${PV} for kde-base packages. KDE_MINIMAL="${KDE_MINIMAL:-4.4}" # Set slot for KDEBASE known packages case ${KDEBASE} in kde-base) SLOT=4/$(get_version_component_range 1-2) KDE_MINIMAL="${PV}" ;; kdevelop) if [[ ${KDE_BUILD_TYPE} = live ]]; then # @ECLASS-VARIABLE: KDEVELOP_VERSION # @DESCRIPTION: # Specifies KDevelop version. Default is 4.0.0 for tagged packages and 9999 for live packages. # Applies to KDEBASE=kdevelop only. KDEVELOP_VERSION="${KDEVELOP_VERSION:-4.9999}" # @ECLASS-VARIABLE: KDEVPLATFORM_VERSION # @DESCRIPTION: # Specifies KDevplatform version. Default is 1.0.0 for tagged packages and 9999 for live packages. # Applies to KDEBASE=kdevelop only. KDEVPLATFORM_VERSION="${KDEVPLATFORM_VERSION:-4.9999}" else case ${PN} in kdevelop) KDEVELOP_VERSION=${PV} KDEVPLATFORM_VERSION="$(($(get_major_version)-3)).$(get_after_major_version)" ;; kdevplatform|kdevelop-php*|kdevelop-python) KDEVELOP_VERSION="$(($(get_major_version)+3)).$(get_after_major_version)" KDEVPLATFORM_VERSION=${PV} ;; *) KDEVELOP_VERSION="${KDEVELOP_VERSION:-4.0.0}" KDEVPLATFORM_VERSION="${KDEVPLATFORM_VERSION:-1.0.0}" esac fi SLOT="4" ;; esac inherit ${buildsystem_eclass} EXPORT_FUNCTIONS pkg_setup src_unpack src_prepare ${export_fns} pkg_preinst pkg_postinst pkg_postrm unset buildsystem_eclass unset export_fns # @ECLASS-VARIABLE: DECLARATIVE_REQUIRED # @DESCRIPTION: # Is qtdeclarative required? Possible values are 'always', 'optional' and 'never'. # This variable must be set before inheriting any eclasses. Defaults to 'never'. DECLARATIVE_REQUIRED="${DECLARATIVE_REQUIRED:-never}" # @ECLASS-VARIABLE: QTHELP_REQUIRED # @DESCRIPTION: # Is qthelp required? Possible values are 'always', 'optional' and 'never'. # This variable must be set before inheriting any eclasses. Defaults to 'never'. QTHELP_REQUIRED="${QTHELP_REQUIRED:-never}" # @ECLASS-VARIABLE: OPENGL_REQUIRED # @DESCRIPTION: # Is qtopengl required? Possible values are 'always', 'optional' and 'never'. # This variable must be set before inheriting any eclasses. Defaults to 'never'. OPENGL_REQUIRED="${OPENGL_REQUIRED:-never}" # @ECLASS-VARIABLE: MULTIMEDIA_REQUIRED # @DESCRIPTION: # Is qtmultimedia required? Possible values are 'always', 'optional' and 'never'. # This variable must be set before inheriting any eclasses. Defaults to 'never'. MULTIMEDIA_REQUIRED="${MULTIMEDIA_REQUIRED:-never}" # @ECLASS-VARIABLE: CPPUNIT_REQUIRED # @DESCRIPTION: # Is cppunit required for tests? Possible values are 'always', 'optional' and 'never'. # This variable must be set before inheriting any eclasses. Defaults to 'never'. CPPUNIT_REQUIRED="${CPPUNIT_REQUIRED:-never}" # @ECLASS-VARIABLE: KDE_REQUIRED # @DESCRIPTION: # Is kde required? Possible values are 'always', 'optional' and 'never'. # This variable must be set before inheriting any eclasses. Defaults to 'always' # If set to 'always' or 'optional', KDE_MINIMAL may be overriden as well. # Note that for kde-base packages this variable is fixed to 'always'. KDE_REQUIRED="${KDE_REQUIRED:-always}" # @ECLASS-VARIABLE: KDE_HANDBOOK # @DESCRIPTION: # Set to enable handbook in application. Possible values are 'always', 'optional' # (handbook USE flag) and 'never'. # This variable must be set before inheriting any eclasses. Defaults to 'never'. # It adds default handbook dirs for kde-base packages to KMEXTRA and in any case it # ensures buildtime and runtime dependencies. KDE_HANDBOOK="${KDE_HANDBOOK:-never}" # @ECLASS-VARIABLE: KDE_LINGUAS_LIVE_OVERRIDE # @DESCRIPTION: # Set this varible if you want your live package to manage its # translations. (Mostly all kde ebuilds does not ship documentation # and translations in live ebuilds) if [[ ${KDE_BUILD_TYPE} == live && -z ${KDE_LINGUAS_LIVE_OVERRIDE} ]]; then # Kdebase actualy provides the handbooks even for live stuff [[ ${KDEBASE} == kde-base ]] || KDE_HANDBOOK=never KDE_LINGUAS="" fi # Setup packages inheriting this eclass case ${KDEBASE} in kde-base) HOMEPAGE="https://www.kde.org/" LICENSE="GPL-2" if [[ ${KDE_BUILD_TYPE} = live && -z ${I_KNOW_WHAT_I_AM_DOING} ]]; then # Disable tests for live ebuilds by default RESTRICT+=" test" fi # This code is to prevent portage from searching GENTOO_MIRRORS for # packages that will never be mirrored. (As they only will ever be in # the overlay). case ${PV} in *9999* | 4.?.[6-9]? | 4.??.[6-9]? | ??.?.[6-9]? | ??.??.[6-9]?) RESTRICT+=" mirror" ;; esac ;; kdevelop) HOMEPAGE="https://www.kdevelop.org/" LICENSE="GPL-2" ;; esac # @ECLASS-VARIABLE: QT_MINIMAL # @DESCRIPTION: # Determine version of qt we enforce as minimal for the package. QT_MINIMAL="${QT_MINIMAL:-4.8.5}" # Declarative dependencies qtdeclarativedepend=" >=dev-qt/qtdeclarative-${QT_MINIMAL}:4 " case ${DECLARATIVE_REQUIRED} in always) COMMONDEPEND+=" ${qtdeclarativedepend}" ;; optional) IUSE+=" declarative" COMMONDEPEND+=" declarative? ( ${qtdeclarativedepend} )" ;; *) ;; esac unset qtdeclarativedepend # QtHelp dependencies qthelpdepend=" >=dev-qt/qthelp-${QT_MINIMAL}:4 " case ${QTHELP_REQUIRED} in always) COMMONDEPEND+=" ${qthelpdepend}" ;; optional) IUSE+=" qthelp" COMMONDEPEND+=" qthelp? ( ${qthelpdepend} )" ;; esac unset qthelpdepend # OpenGL dependencies qtopengldepend=" >=dev-qt/qtopengl-${QT_MINIMAL}:4 " case ${OPENGL_REQUIRED} in always) COMMONDEPEND+=" ${qtopengldepend}" ;; optional) IUSE+=" opengl" COMMONDEPEND+=" opengl? ( ${qtopengldepend} )" ;; *) ;; esac unset qtopengldepend # MultiMedia dependencies qtmultimediadepend=" >=dev-qt/qtmultimedia-${QT_MINIMAL}:4 " case ${MULTIMEDIA_REQUIRED} in always) COMMONDEPEND+=" ${qtmultimediadepend}" ;; optional) IUSE+=" multimedia" COMMONDEPEND+=" multimedia? ( ${qtmultimediadepend} )" ;; *) ;; esac unset qtmultimediadepend # CppUnit dependencies cppuintdepend=" dev-util/cppunit " case ${CPPUNIT_REQUIRED} in always) DEPEND+=" ${cppuintdepend}" ;; optional) IUSE+=" test" DEPEND+=" test? ( ${cppuintdepend} )" ;; *) ;; esac unset cppuintdepend # KDE dependencies # Qt accessibility classes are needed in various places, bug 325461 kdecommondepend=" dev-lang/perl >=dev-qt/qt3support-${QT_MINIMAL}:4[accessibility] >=dev-qt/qtcore-${QT_MINIMAL}:4[qt3support,ssl] >=dev-qt/qtdbus-${QT_MINIMAL}:4 >=dev-qt/designer-${QT_MINIMAL}:4 >=dev-qt/qtgui-${QT_MINIMAL}:4[accessibility,dbus(+)] >=dev-qt/qtscript-${QT_MINIMAL}:4 >=dev-qt/qtsql-${QT_MINIMAL}:4[qt3support] >=dev-qt/qtsvg-${QT_MINIMAL}:4 >=dev-qt/qttest-${QT_MINIMAL}:4 >=dev-qt/qtwebkit-${QT_MINIMAL}:4 " if [[ ${PN} != kdelibs ]]; then kdecommondepend+=" $(add_kdebase_dep kdelibs)" if [[ ${KDEBASE} = kdevelop ]]; then if [[ ${PN} != kdevplatform ]]; then # @ECLASS-VARIABLE: KDEVPLATFORM_REQUIRED # @DESCRIPTION: # Specifies whether kdevplatform is required. Possible values are 'always' (default) and 'never'. # Applies to KDEBASE=kdevelop only. KDEVPLATFORM_REQUIRED="${KDEVPLATFORM_REQUIRED:-always}" case ${KDEVPLATFORM_REQUIRED} in always) kdecommondepend+=" >=dev-util/kdevplatform-${KDEVPLATFORM_VERSION}:4 " ;; *) ;; esac fi fi fi kdedepend=" dev-util/automoc virtual/pkgconfig !aqua? ( >=x11-libs/libXtst-1.1.0 x11-proto/xf86vidmodeproto ) " kderdepend="" if [[ ${CATEGORY} == kde-apps ]]; then kderdepend+=" !kde-base/${PN}:4" fi # all packages needs oxygen icons for basic iconset if [[ ${PN} != oxygen-icons ]]; then kderdepend+=" kde-apps/oxygen-icons" fi # add a dependency over kde4-l10n if [[ ${KDEBASE} != "kde-base" && -n ${KDE_LINGUAS} ]]; then for _lingua in ${KDE_LINGUAS}; do # if our package has linguas, pull in kde4-l10n with selected lingua enabled, # but only for selected ones. # this can't be done on one line because if user doesn't use any localisation # then he is probably not interested in kde4-l10n at all. kderdepend+=" linguas_${_lingua}? ( $(add_kdeapps_dep kde4-l10n "linguas_${_lingua}(+)") ) " done unset _lingua fi kdehandbookdepend=" app-text/docbook-xml-dtd:4.2 app-text/docbook-xsl-stylesheets " kdehandbookrdepend=" $(add_kdebase_dep kdelibs 'handbook') " case ${KDE_HANDBOOK} in always) kdedepend+=" ${kdehandbookdepend}" [[ ${PN} != kdelibs ]] && kderdepend+=" ${kdehandbookrdepend}" ;; optional) IUSE+=" +handbook" kdedepend+=" handbook? ( ${kdehandbookdepend} )" [[ ${PN} != kdelibs ]] && kderdepend+=" handbook? ( ${kdehandbookrdepend} )" ;; *) ;; esac unset kdehandbookdepend kdehandbookrdepend case ${KDE_SELINUX_MODULE} in none) ;; *) IUSE+=" selinux" kderdepend+=" selinux? ( sec-policy/selinux-${KDE_SELINUX_MODULE} )" ;; esac # We always need the aqua useflag because otherwise we cannot = refer to it inside # add_kdebase_dep. This was always kind of a bug, but came to light with EAPI=5 # (where referring to a use flag not in IUSE masks the ebuild). # The only alternative would be to prohibit using add_kdebase_dep if KDE_REQUIRED=never IUSE+=" aqua" case ${KDE_REQUIRED} in always) [[ -n ${kdecommondepend} ]] && COMMONDEPEND+=" ${kdecommondepend}" [[ -n ${kdedepend} ]] && DEPEND+=" ${kdedepend}" [[ -n ${kderdepend} ]] && RDEPEND+=" ${kderdepend}" ;; optional) IUSE+=" kde" [[ -n ${kdecommondepend} ]] && COMMONDEPEND+=" kde? ( ${kdecommondepend} )" [[ -n ${kdedepend} ]] && DEPEND+=" kde? ( ${kdedepend} )" [[ -n ${kderdepend} ]] && RDEPEND+=" kde? ( ${kderdepend} )" ;; *) ;; esac unset kdecommondepend kdedepend kderdepend debug-print "${LINENO} ${ECLASS} ${FUNCNAME}: COMMONDEPEND is ${COMMONDEPEND}" debug-print "${LINENO} ${ECLASS} ${FUNCNAME}: DEPEND (only) is ${DEPEND}" debug-print "${LINENO} ${ECLASS} ${FUNCNAME}: RDEPEND (only) is ${RDEPEND}" # Accumulate dependencies set by this eclass DEPEND+=" ${COMMONDEPEND}" RDEPEND+=" ${COMMONDEPEND}" unset COMMONDEPEND # Fetch section - If the ebuild's category is not 'kde-base' and if it is not a # kdevelop ebuild, the URI should be set in the ebuild itself _calculate_src_uri() { debug-print-function ${FUNCNAME} "$@" local _kmname _kmname_pv # we calculate URI only for known KDEBASE modules [[ -n ${KDEBASE} ]] || return # calculate tarball module name if [[ -n ${KMNAME} ]]; then _kmname="${KMNAME}" else _kmname=${PN} fi _kmname_pv="${_kmname}-${PV}" case ${KDEBASE} in kde-base) case ${PV} in 4.4.11.1) # KDEPIM 4.4, special case # TODO: Remove this part when KDEPIM 4.4 gets out of the tree SRC_URI="mirror://kde/stable/kdepim-${PV}/src/${_kmname_pv}.tar.bz2" ;; 4.4.20*) # KDEPIM 4.4 no-akonadi branch, special case # TODO: Remove this part when KDEPIM 4.4 gets out of the tree SRC_URI="https://dev.gentoo.org/~dilfridge/distfiles/${_kmname_pv}.tar.xz" ;; 4.?.[6-9]? | 4.??.[6-9]?) # Unstable KDE SC releases SRC_URI="mirror://kde/unstable/${PV}/src/${_kmname_pv}.tar.xz" ;; 4.11.14) # Part of 4.14 actually, sigh. Not stable for next release! SRC_URI="mirror://kde/stable/4.14.3/src/${_kmname_pv}.tar.xz" ;; 4.11.19) # Part of 15.04.1 actually, sigh. Not stable for next release! SRC_URI="mirror://kde/stable/applications/15.04.1/src/${_kmname_pv}.tar.xz" ;; 4.11.21) # Part of 15.04.3 actually, sigh. Not stable for next release! SRC_URI="mirror://kde/stable/applications/15.04.3/src/${_kmname_pv}.tar.xz" ;; 4.11.22) # Part of 15.08.0 actually, sigh. Not stable for next release! SRC_URI="mirror://kde/stable/applications/15.08.0/src/${_kmname_pv}.tar.xz" ;; 4.14.3) # Last SC release SRC_URI="mirror://kde/stable/${PV}/src/${_kmname_pv}.tar.xz" ;; 4.14.8) # Part of 15.04.1 actually, sigh. Not stable for next release! SRC_URI="mirror://kde/stable/applications/15.04.1/src/${_kmname_pv}.tar.xz" ;; 4.14.10) # Part of 15.04.3 actually, sigh. Not stable for next release! SRC_URI="mirror://kde/stable/applications/15.04.3/src/${_kmname_pv}.tar.xz" ;; 4.14.11) # Part of 15.08.0 actually, sigh. Not stable for next release! SRC_URI="mirror://kde/stable/applications/15.08.0/src/${_kmname_pv}.tar.xz" ;; 4.14.12) # Part of 15.08.1 actually, sigh. Not stable for next release! SRC_URI="mirror://kde/stable/applications/15.08.1/src/${_kmname_pv}.tar.xz" ;; 4.14.13) # Part of 15.08.2 actually, sigh. Not stable for next release! SRC_URI="mirror://kde/stable/applications/15.08.2/src/${_kmname_pv}.tar.xz" ;; ??.?.[6-9]? | ??.??.[4-9]?) # Unstable KDE Applications releases SRC_URI="mirror://kde/unstable/applications/${PV}/src/${_kmname}-${PV}.tar.xz" ;; *) # Stable KDE Applications releases SRC_URI="mirror://kde/stable/applications/${PV}/src/${_kmname}-${PV}.tar.xz" ;; esac ;; kdevelop|kdevelop-php*|kdevplatform) case ${KDEVELOP_VERSION} in 4.[123].[6-9]*) SRC_URI="mirror://kde/unstable/kdevelop/${KDEVELOP_VERSION}/src/${P}.tar.xz" ;; *) SRC_URI="mirror://kde/stable/kdevelop/${KDEVELOP_VERSION}/src/${P}.tar.xz" ;; esac ;; esac } _calculate_live_repo() { debug-print-function ${FUNCNAME} "$@" SRC_URI="" case ${KDE_SCM} in svn) # Determine branch URL based on live type local branch_prefix case ${PV} in 9999*) # trunk branch_prefix="trunk/KDE" ;; *) # branch branch_prefix="branches/KDE/$(get_kde_version)" if [[ ${PV} == ??.??.49.9999 && ${CATEGORY} = kde-apps ]]; then branch_prefix="branches/Applications/$(get_kde_version)" fi # @ECLASS-VARIABLE: ESVN_PROJECT_SUFFIX # @DESCRIPTION # Suffix appended to ESVN_PROJECT depending on fetched branch. # Defaults is empty (for -9999 = trunk), and "-${PV}" otherwise. ESVN_PROJECT_SUFFIX="-${PV}" ;; esac # @ECLASS-VARIABLE: ESVN_MIRROR # @DESCRIPTION: # This variable allows easy overriding of default kde mirror service # (anonsvn) with anything else you might want to use. ESVN_MIRROR=${ESVN_MIRROR:=svn://anonsvn.kde.org/home/kde} # Split ebuild, or extragear stuff if [[ -n ${KMNAME} ]]; then ESVN_PROJECT="${KMNAME}${ESVN_PROJECT_SUFFIX}" if [[ -z ${KMNOMODULE} ]] && [[ -z ${KMMODULE} ]]; then KMMODULE="${PN}" fi # Split kde-base/ ebuilds: (they reside in trunk/KDE) case ${KMNAME} in kdebase-*) ESVN_REPO_URI="${ESVN_MIRROR}/${branch_prefix}/kdebase/${KMNAME#kdebase-}" ;; kdelibs-*) ESVN_REPO_URI="${ESVN_MIRROR}/${branch_prefix}/kdelibs/${KMNAME#kdelibs-}" ;; kdereview*) ESVN_REPO_URI="${ESVN_MIRROR}/trunk/${KMNAME}/${KMMODULE}" ;; kdesupport) ESVN_REPO_URI="${ESVN_MIRROR}/trunk/${KMNAME}/${KMMODULE}" ESVN_PROJECT="${PN}${ESVN_PROJECT_SUFFIX}" ;; kde*) ESVN_REPO_URI="${ESVN_MIRROR}/${branch_prefix}/${KMNAME}" ;; extragear*|playground*) # Unpack them in toplevel dir, so that they won't conflict with kde4-meta # build packages from same svn location. ESVN_REPO_URI="${ESVN_MIRROR}/trunk/${KMNAME}/${KMMODULE}" ESVN_PROJECT="${PN}${ESVN_PROJECT_SUFFIX}" ;; *) ESVN_REPO_URI="${ESVN_MIRROR}/trunk/${KMNAME}/${KMMODULE}" ;; esac else # kdelibs, kdepimlibs ESVN_REPO_URI="${ESVN_MIRROR}/${branch_prefix}/${PN}" ESVN_PROJECT="${PN}${ESVN_PROJECT_SUFFIX}" fi # @ECLASS-VARIABLE: ESVN_UP_FREQ # @DESCRIPTION: # This variable is used for specifying the timeout between svn synces # for kde-base modules. Does not affect misc apps. # Default value is 1 hour. [[ ${KDEBASE} = kde-base ]] && ESVN_UP_FREQ=${ESVN_UP_FREQ:-1} ;; git) local _kmname # @ECLASS-VARIABLE: EGIT_MIRROR # @DESCRIPTION: # This variable allows easy overriding of default kde mirror service # (anongit) with anything else you might want to use. EGIT_MIRROR=${EGIT_MIRROR:=git://anongit.kde.org} # @ECLASS-VARIABLE: EGIT_REPONAME # @DESCRIPTION: # This variable allows overriding of default repository # name. Specify only if this differ from PN and KMNAME. if [[ -n ${EGIT_REPONAME} ]]; then # the repository and kmname different _kmname=${EGIT_REPONAME} elif [[ -n ${KMNAME} ]]; then _kmname=${KMNAME} else _kmname=${PN} fi # default branching [[ ${PV} != 4.9999* && ${PV} != 9999 && ${KDEBASE} == kde-base ]] && \ EGIT_BRANCH="KDE/$(get_kde_version)" # Applications branching [[ ${PV} == ??.??.49.9999 && ${KDEBASE} == kde-base ]] && \ EGIT_BRANCH="Applications/$(get_kde_version)" # default repo uri EGIT_REPO_URI+=( "${EGIT_MIRROR}/${_kmname}" ) debug-print "${FUNCNAME}: Repository: ${EGIT_REPO_URI}" debug-print "${FUNCNAME}: Branch: ${EGIT_BRANCH}" ;; esac } case ${KDE_BUILD_TYPE} in live) _calculate_live_repo ;; *) _calculate_src_uri ;; esac debug-print "${LINENO} ${ECLASS} ${FUNCNAME}: SRC_URI is ${SRC_URI}" # @ECLASS-VARIABLE: PREFIX # @DESCRIPTION: # Set the installation PREFIX for non kde-base applications. It defaults to /usr. # kde-base packages go into KDE4 installation directory (/usr). # No matter the PREFIX, package will be built against KDE installed in /usr. # @FUNCTION: kde4-base_pkg_setup # @DESCRIPTION: # Do some basic settings kde4-base_pkg_setup() { debug-print-function ${FUNCNAME} "$@" if has handbook ${IUSE} || has "+handbook" ${IUSE} && [ "${KDE_HANDBOOK}" != optional ] ; then eqawarn "Handbook support is enabled via KDE_HANDBOOK=optional in the ebuild." eqawarn "Please do not just set IUSE=handbook, as this leads to dependency errors." fi # Don't set KDEHOME during compilation, it will cause access violations unset KDEHOME # Check if gcc compiler is fresh enough. # In theory should be in pkg_pretend but we check it only for kdelibs there # and for others we do just quick scan in pkg_setup because pkg_pretend # executions consume quite some time (ie. when merging 300 packages at once will cause 300 checks) if [[ ${MERGE_TYPE} != binary ]]; then [[ $(gcc-major-version) -lt 4 ]] || \ ( [[ $(gcc-major-version) -eq 4 && $(gcc-minor-version) -le 6 ]] ) \ && die "Sorry, but gcc-4.6 and earlier wont work for some KDE packages." fi KDEDIR=/usr : ${PREFIX:=/usr} EKDEDIR=${EPREFIX}/usr # Point to correct QT plugins path QT_PLUGIN_PATH="${EPREFIX}/usr/$(get_libdir)/kde4/plugins/" # Fix XDG collision with sandbox export XDG_CONFIG_HOME="${T}" } # @FUNCTION: kde4-base_src_unpack # @DESCRIPTION: # This function unpacks the source tarballs for KDE4 applications. kde4-base_src_unpack() { debug-print-function ${FUNCNAME} "$@" if [[ ${KDE_BUILD_TYPE} = live ]]; then case ${KDE_SCM} in svn) subversion_src_unpack ;; git) git-r3_src_unpack ;; esac else unpack ${A} fi } # @FUNCTION: kde4-base_src_prepare # @DESCRIPTION: # General pre-configure and pre-compile function for KDE4 applications. # It also handles translations if KDE_LINGUAS is defined. See KDE_LINGUAS and # enable_selected_linguas() and enable_selected_doc_linguas() # in kde4-functions.eclass(5) for further details. kde4-base_src_prepare() { debug-print-function ${FUNCNAME} "$@" # enable handbook and linguas only when not using live ebuild # Only enable selected languages, used for KDE extragear apps. if [[ -n ${KDE_LINGUAS} ]]; then enable_selected_linguas fi # Enable/disable handbooks for kde4-base packages # kde4-l10n inherits kde4-base but is metapackage, so no check for doc # kdelibs inherits kde4-base but handle installing the handbook itself if ! has kde4-meta ${INHERITED} && in_iuse handbook; then if [[ ${KDEBASE} == kde-base ]]; then if [[ ${PN} != kde4-l10n && ${PN} != kdepim-l10n && ${PN} != kdelibs ]] && use !handbook; then # documentation in kde4-functions : ${KDE_DOC_DIRS:=doc} local dir for dir in ${KDE_DOC_DIRS}; do sed -e "\!^[[:space:]]*add_subdirectory[[:space:]]*([[:space:]]*${dir}[[:space:]]*)!s/^/#DONOTCOMPILE /" \ -e "\!^[[:space:]]*ADD_SUBDIRECTORY[[:space:]]*([[:space:]]*${dir}[[:space:]]*)!s/^/#DONOTCOMPILE /" \ -e "\!^[[:space:]]*macro_optional_add_subdirectory[[:space:]]*([[:space:]]*${dir}[[:space:]]*)!s/^/#DONOTCOMPILE /" \ -e "\!^[[:space:]]*MACRO_OPTIONAL_ADD_SUBDIRECTORY[[:space:]]*([[:space:]]*${dir}[[:space:]]*)!s/^/#DONOTCOMPILE /" \ -i CMakeLists.txt || die "failed to comment out handbook" done fi else enable_selected_doc_linguas fi fi # SCM bootstrap if [[ ${KDE_BUILD_TYPE} = live ]]; then case ${KDE_SCM} in svn) subversion_src_prepare ;; esac fi # Apply patches, cmake-utils does the job already cmake-utils_src_prepare # Save library dependencies if [[ -n ${KMSAVELIBS} ]] ; then save_library_dependencies fi # Inject library dependencies if [[ -n ${KMLOADLIBS} ]] ; then load_library_dependencies fi # Hack for manuals relying on outdated DTD, only outside kde-base/... if [[ -z ${KDEBASE} ]]; then find "${S}" -name "*.docbook" \ -exec sed -i -r \ -e 's:-//KDE//DTD DocBook XML V4\.1(\..)?-Based Variant V1\.[01]//EN:-//KDE//DTD DocBook XML V4.2-Based Variant V1.1//EN:g' {} + \ || die 'failed to fix DocBook variant version' fi } # @FUNCTION: kde4-base_src_configure # @DESCRIPTION: # Function for configuring the build of KDE4 applications. kde4-base_src_configure() { debug-print-function ${FUNCNAME} "$@" # Build tests in src_test only, where we override this value local cmakeargs=(-DKDE4_BUILD_TESTS=OFF) if use_if_iuse debug; then # Set "real" debug mode CMAKE_KDE_BUILD_TYPE="Debugfull" else # Handle common release builds append-cppflags -DQT_NO_DEBUG fi # Set distribution name [[ ${PN} = kdelibs ]] && cmakeargs+=(-DKDE_DISTRIBUTION_TEXT=Gentoo) # Here we set the install prefix tc-is-cross-compiler || cmakeargs+=(-DCMAKE_INSTALL_PREFIX="${EPREFIX}${PREFIX}") # Use colors QTEST_COLORED=1 # Shadow existing installations unset KDEDIRS #qmake -query QT_INSTALL_LIBS unavailable when cross-compiling tc-is-cross-compiler && cmakeargs+=(-DQT_LIBRARY_DIR=${ROOT}/usr/$(get_libdir)/qt4) #kde-config -path data unavailable when cross-compiling tc-is-cross-compiler && cmakeargs+=(-DKDE4_DATA_DIR=${ROOT}/usr/share/apps/) # sysconf needs to be /etc, not /usr/etc cmakeargs+=(-DSYSCONF_INSTALL_DIR="${EPREFIX}"/etc) if [[ $(declare -p mycmakeargs 2>&-) != "declare -a mycmakeargs="* ]]; then if [[ ${mycmakeargs} ]]; then eqawarn "mycmakeargs should always be declared as an array, not a string" fi mycmakeargs=(${mycmakeargs}) fi mycmakeargs=("${cmakeargs[@]}" "${mycmakeargs[@]}") cmake-utils_src_configure } # @FUNCTION: kde4-base_src_compile # @DESCRIPTION: # General function for compiling KDE4 applications. kde4-base_src_compile() { debug-print-function ${FUNCNAME} "$@" cmake-utils_src_compile "$@" } # @FUNCTION: kde4-base_src_test # @DESCRIPTION: # Function for testing KDE4 applications. kde4-base_src_test() { debug-print-function ${FUNCNAME} "$@" local kded4_pid _test_runner() { if [[ -n "${VIRTUALDBUS_TEST}" ]]; then export $(dbus-launch) kded4 2>&1 > /dev/null & kded4_pid=$! fi cmake-utils_src_test } # When run as normal user during ebuild development with the ebuild command, the # kde tests tend to access the session DBUS. This however is not possible in a real # emerge or on the tinderbox. # > make sure it does not happen, so bad tests can be recognized and disabled unset DBUS_SESSION_BUS_ADDRESS DBUS_SESSION_BUS_PID # Override this value, set in kde4-base_src_configure() mycmakeargs+=(-DKDE4_BUILD_TESTS=ON) cmake-utils_src_configure kde4-base_src_compile if [[ ${VIRTUALX_REQUIRED} == always || ${VIRTUALX_REQUIRED} == test ]]; then # check for sanity if anyone already redefined VIRTUALX_COMMAND from the default if [[ ${VIRTUALX_COMMAND} != emake ]]; then # surprise- we are already INSIDE virtualmake!!! debug-print "QA Notice: This version of kde4-base.eclass includes the virtualx functionality." debug-print " You may NOT set VIRTUALX_COMMAND or call virtualmake from the ebuild." debug-print " Setting VIRTUALX_REQUIRED is completely sufficient. See the" debug-print " kde4-base.eclass docs for details... Applying workaround." _test_runner else VIRTUALX_COMMAND="_test_runner" virtualmake fi else _test_runner fi if [ -n "${kded4_pid}" ] ; then kill ${kded4_pid} fi if [ -n "${DBUS_SESSION_BUS_PID}" ] ; then kill ${DBUS_SESSION_BUS_PID} fi } # @FUNCTION: kde4-base_src_install # @DESCRIPTION: # Function for installing KDE4 applications. kde4-base_src_install() { debug-print-function ${FUNCNAME} "$@" if [[ -n ${KMSAVELIBS} ]] ; then install_library_dependencies fi # Install common documentation of KDE4 applications local doc if ! has kde4-meta ${INHERITED}; then for doc in "${S}"/{AUTHORS,CHANGELOG,ChangeLog*,README*,NEWS,TODO,HACKING}; do [[ -f ${doc} && -s ${doc} ]] && dodoc "${doc}" done for doc in "${S}"/*/{AUTHORS,CHANGELOG,ChangeLog*,README*,NEWS,TODO,HACKING}; do [[ -f ${doc} && -s ${doc} ]] && newdoc "${doc}" "$(basename $(dirname ${doc})).$(basename ${doc})" done fi cmake-utils_src_install # We don't want ${PREFIX}/share/doc/HTML to be compressed, # because then khelpcenter can't find the docs [[ -d ${ED}/${PREFIX}/share/doc/HTML ]] && docompress -x ${PREFIX}/share/doc/HTML } # @FUNCTION: kde4-base_pkg_preinst # @DESCRIPTION: # Function storing icon caches kde4-base_pkg_preinst() { debug-print-function ${FUNCNAME} "$@" gnome2_icon_savelist if [[ ${KDE_BUILD_TYPE} == live && ${KDE_SCM} == svn ]]; then subversion_pkg_preinst fi } # @FUNCTION: kde4-base_pkg_postinst # @DESCRIPTION: # Function to rebuild the KDE System Configuration Cache after an application has been installed. kde4-base_pkg_postinst() { debug-print-function ${FUNCNAME} "$@" gnome2_icon_cache_update fdo-mime_desktop_database_update fdo-mime_mime_database_update buildsycoca if [[ -z ${I_KNOW_WHAT_I_AM_DOING} ]]; then if [[ ${KDE_BUILD_TYPE} = live ]]; then echo einfo "WARNING! This is an experimental live ebuild of ${CATEGORY}/${PN}" einfo "Use it at your own risk." einfo "Do _NOT_ file bugs at bugs.gentoo.org because of this ebuild!" echo fi # for all 3rd party soft tell user that he SHOULD install kdebase-startkde or kdebase-runtime-meta if [[ ${KDEBASE} != kde-base ]] && \ ! has_version 'kde-apps/kdebase-runtime-meta'; then if [[ ${KDE_REQUIRED} == always ]] || ( [[ ${KDE_REQUIRED} == optional ]] && use kde ); then echo ewarn "WARNING! Your system configuration does not contain \"kde-apps/kdebase-runtime-meta\"." ewarn "With this setting you are unsupported by KDE team." ewarn "All missing features you report for misc packages will be probably ignored or closed as INVALID." fi fi fi } # @FUNCTION: kde4-base_pkg_postrm # @DESCRIPTION: # Function to rebuild the KDE System Configuration Cache after an application has been removed. kde4-base_pkg_postrm() { debug-print-function ${FUNCNAME} "$@" gnome2_icon_cache_update fdo-mime_desktop_database_update fdo-mime_mime_database_update buildsycoca } fi