diff options
Diffstat (limited to 'net-print/foo2zjs/files/foo2zjs-20081129-udevfwld.patch')
| -rw-r--r-- | net-print/foo2zjs/files/foo2zjs-20081129-udevfwld.patch | 273 |
1 files changed, 273 insertions, 0 deletions
diff --git a/net-print/foo2zjs/files/foo2zjs-20081129-udevfwld.patch b/net-print/foo2zjs/files/foo2zjs-20081129-udevfwld.patch new file mode 100644 index 00000000..808b32f1 --- /dev/null +++ b/net-print/foo2zjs/files/foo2zjs-20081129-udevfwld.patch @@ -0,0 +1,273 @@ +--- 1/Makefile ++++ 1/Makefile +@@ -20,6 +20,10 @@ + PREFIX=/usr + PREFIX=$(DESTDIR)/usr + ++# USB_PRINTERID is also installed there because it is needed by the FWloader ++FWLOADERDIR=$(DESTDIR)/sbin ++FIRMWAREDIR=$(DESTDIR)/lib/firmware ++ + # Pathnames for this package... + BIN=$(PREFIX)/bin + SHAREZJS=$(PREFIX)/share/foo2zjs +@@ -661,21 +665,21 @@ + fi; \ + done + # foo2zjs Firmware files (if any) +- $(INSTALL) $(LPuid) $(LPgid) -m 775 -d $(SHAREZJS)/firmware/ ++ $(INSTALL) $(LPuid) $(LPgid) -m 775 -d $(FIRMWAREDIR)/ + for i in sihp1*.img; do \ + if [ -f $$i ]; then \ + base=`basename $$i .img`; \ + ./arm2hpdl $$i >$$base.dl; \ +- $(INSTALL) -c -m 644 $$base.dl $(SHAREZJS)/firmware/; \ ++ $(INSTALL) -c -m 644 $$base.dl $(FIRMWAREDIR)/; \ + fi; \ + done + # foo2xqx Firmware files (if any) +- $(INSTALL) $(LPuid) $(LPgid) -m 775 -d $(SHAREXQX)/firmware/ ++ $(INSTALL) $(LPuid) $(LPgid) -m 775 -d $(FIRMWAREDIR)/ + for i in sihpP*.img; do \ + if [ -f $$i ]; then \ + base=`basename $$i .img`; \ + ./arm2hpdl $$i >$$base.dl; \ +- $(INSTALL) -c -m 644 $$base.dl $(SHAREXQX)/firmware/; \ ++ $(INSTALL) -c -m 644 $$base.dl $(FIRMWAREDIR)/; \ + fi; \ + done + # foo2oak ICM files (if any) +@@ -818,6 +822,8 @@ + UDEVDIR=$(DESTDIR)/etc/udev/rules.d + RULES=hplj10xx.rules + install-udev: ++ [ -d $(FWLOADERDIR) ] || install -d -m 755 $(FWLOADERDIR)/ ++ install -c -m 755 foo2zjs-loadfw $(FWLOADERDIR)/ + [ -d $(UDEVDIR) ] || install -d -m 755 $(UDEVDIR)/ + install -c -m 644 $(RULES) $(UDEVDIR)/11-$(RULES) + +--- foo2zjs-loadfw ++++ foo2zjs-loadfw +@@ -0,0 +1,151 @@ ++#!/bin/sh ++ ++# foo2zjs-loadfw: ++# ++# Hotplug script for 100[05],1018,1020,P100[5678],P1505,P1505n ++# USB laser printers. The model number ++# that this script deals with is determined from the udev env. ++# ++# Used to download firmware automatically into the printer when it ++# is powered up or plugged into the USB port. ++# ++# The inspiration fo this script is from: ++# Oscar Santacreu. Alicante-Spain (2002) ++# Mike Morgan (2004) ++# Modified by Stefan Schweizer (2005) to work as a udev-RUN-script ++ ++# ++# Directory to find downloadable HP firmware files sihpMMMM.dl ++# ++FWDIR=/lib/firmware ++ ++# ++# Program used to determine USB printer id information ++# ++USBID=/bin/usb_printerid ++ ++# ++# Timeout to load firmware ++# ++TIMEOUT=6 ++ ++# ++# Figure out how to log our messages ++# ++if [ -t 1 ]; then ++ # Running from a tty... ++ log() { ++ echo "$0: $@" ++ } ++elif [ -x /usr/bin/logger ]; then ++ # Have logger... ++ log() { ++ logger -t "$0" -- "$@" ++ } ++else ++ # No logger... ++ log() { ++ echo "$0: $@" >> /var/log/messages ++ } ++fi ++ ++# ++# Figure out the model number from the argument of this script ++# ++MODELNAME='' ++FWMODEL='' ++case "$1" in ++P1005) ++ MODEL=P1005 ++ ;; ++P1006) ++ MODEL=P1006 ++ ;; ++P1007) ++ MODEL=P1007 ++ FWMODEL=P1005 ++ ;; ++P1008) ++ MODEL=P1008 ++ FWMODEL=P1006 ++ ;; ++P1505) ++ MODEL=P1505 ++ ;; ++P1505n) ++ MODEL=P1505n ++ FWMODEL=P1505 ++ ;; ++1000) ++ MODEL=1000 ++ MODELNAME="hp LaserJet $MODEL" ++ ;; ++1005) ++ MODEL=1005 ++ MODELNAME="hp LaserJet $MODEL" ++ ;; ++1018) ++ MODEL=1018 ++ ;; ++1020) ++ MODEL=1020 ++ ;; ++*) ++ log "Only HP LaserJet 100[05],1018,1020,P100[5678],P1505,P1505n are supported" ++ log "You need to supply one of these on the cmdline: $0 10**" ++ exit ++ ;; ++esac ++: ${MODELNAME:="HP LaserJet $MODEL"} ++: ${FWMODEL:="$MODEL"} ++ ++if [ -n "$2" ]; then ++ DEVNAME=$2 ++elif [ -n "$DEVNAME" ]; then ++ log 'using $DEVNAME' ++else ++ log "You need to either have $DEVNAME set in the environment or supply it on the cmdline, like:" ++ log "$0 10** /dev/usb/lp0" ++ exit 1 ++fi ++ ++# ++# Procedure to load a single device with firmware ++# ++load1() { ++ fw="$FWDIR/sihp$FWMODEL.dl" ++ if [ ! -f "$fw" ]; then ++ log "Missing HP LaserJet $MODEL firmware file $fw" ++ log "...read foo2zjs installation instructions and run ./getweb $MODEL" ++ return 1 ++ fi ++ ++ log "loading HP LaserJet $MODEL firmware $fw to $DEVNAME ..." ++ if cat $fw > $DEVNAME; then ++ sleep $TIMEOUT ++ log "... download successful." ++ else ++ log "... download failed." ++ fi ++ return 0 ++} ++ ++# ++# OK, now download firmware to any printers that need it ++# ++if [ -x $USBID ]; then ++ if $USBID $DEVNAME | grep "$MODELNAME" 2> /dev/null; then ++ # This is a LaserJet 100x ++ if $USBID $DEVNAME | grep 'FWVER' 2> /dev/null; then ++ log "HP LaserJet $MODEL firmware already loaded into $DEVNAME" ++ else ++ # Firmware is not yet loaded ++ load1 "$DEVNAME" ++ fi ++ else ++ log "No supported printer found." ++ fi ++else ++ log "HP LaserJet $MODEL firmware was not downloaded..." ++ log "...couldn't find $USBID" ++fi +--- hplj1000 ++++ hplj1000 +@@ -35,7 +35,7 @@ + # + # Directory to find downloadable HP firmware files sihpMMMM.dl + # +-FWDIR=/usr/share/foo2zjs/firmware ++FWDIR=/lib/firmware + + # + # Program used to determine USB printer id information +--- hplj10xx.rules ++++ hplj10xx.rules +@@ -1,36 +1,21 @@ +-#Own udev rule for HP Laserjet 1000 +-KERNEL=="lp*", BUS=="usb", SYSFS{idVendor}=="03f0", \ +- SYSFS{product}=="hp LaserJet 1000", NAME="usb/%k", \ +- SYMLINK+="hplj1000-%n", MODE="0666", RUN+="/etc/hotplug/usb/hplj1000" +-#Own udev rule for HP Laserjet 1005 +-KERNEL=="lp*", BUS=="usb", SYSFS{idVendor}=="03f0", \ +- SYSFS{product}=="hp LaserJet 1005 series", NAME="usb/%k", \ +- SYMLINK+="hplj1005-%n", MODE="0666", RUN+="/etc/hotplug/usb/hplj1005" +-#Own udev rule for HP Laserjet 1018 +-KERNEL=="lp*", BUS=="usb", SYSFS{idVendor}=="03f0", \ +- SYSFS{product}=="HP LaserJet 1018", NAME="usb/%k", \ +- SYMLINK+="hplj1018-%n", MODE="0666", RUN+="/etc/hotplug/usb/hplj1018" +-#Own udev rule for HP Laserjet 1020 +-KERNEL=="lp*", BUS=="usb", SYSFS{idVendor}=="03f0", \ +- SYSFS{product}=="HP LaserJet 1020", NAME="usb/%k", \ +- SYMLINK+="hplj1020-%n", MODE="0666", RUN+="/etc/hotplug/usb/hplj1020" +-#Own udev rule for HP Laserjet P1005 +-KERNEL=="lp*", BUS=="usb", SYSFS{idVendor}=="03f0", \ +- SYSFS{product}=="HP LaserJet P1005", NAME="usb/%k", \ +- SYMLINK+="hpljP1005-%n", MODE="0666", RUN+="/etc/hotplug/usb/hpljP1005" +-#Own udev rule for HP Laserjet P1006 +-KERNEL=="lp*", BUS=="usb", SYSFS{idVendor}=="03f0", \ +- SYSFS{product}=="HP LaserJet P1006", NAME="usb/%k", \ +- SYMLINK+="hpljP1006-%n", MODE="0666", RUN+="/etc/hotplug/usb/hpljP1006" +-#Own udev rule for HP Laserjet P1007 +-KERNEL=="lp*", BUS=="usb", SYSFS{idVendor}=="03f0", \ +- SYSFS{product}=="HP LaserJet P1007", NAME="usb/%k", \ +- SYMLINK+="hpljP1007-%n", MODE="0666", RUN+="/etc/hotplug/usb/hpljP1007" +-#Own udev rule for HP Laserjet P1008 +-KERNEL=="lp*", BUS=="usb", SYSFS{idVendor}=="03f0", \ +- SYSFS{product}=="HP LaserJet P1008", NAME="usb/%k", \ +- SYMLINK+="hpljP1008-%n", MODE="0666", RUN+="/etc/hotplug/usb/hpljP1008" +-#Own udev rule for HP Laserjet P1505 +-KERNEL=="lp*", BUS=="usb", SYSFS{idVendor}=="03f0", \ +- SYSFS{product}=="HP LaserJet P1505", NAME="usb/%k", \ +- SYMLINK+="hpljP1505-%n", MODE="0666", RUN+="/etc/hotplug/usb/hpljP1505" ++ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", \ ++ ATTRS{idProduct}=="3d17", RUN+="/sbin/foo2zjs-loadfw P1005 $tempnode" ++ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", \ ++ ATTRS{idProduct}=="3e17", RUN+="/sbin/foo2zjs-loadfw P1006 $tempnode" ++ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", \ ++ ATTRS{idProduct}=="4817", RUN+="/sbin/foo2zjs-loadfw P1007 $tempnode" ++ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", \ ++ ATTRS{idProduct}=="4917", RUN+="/sbin/foo2zjs-loadfw P1008 $tempnode" ++ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", \ ++ ATTRS{idProduct}=="3f17", RUN+="/sbin/foo2zjs-loadfw P1505 $tempnode" ++ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", \ ++ ATTRS{idProduct}=="4017", RUN+="/sbin/foo2zjs-loadfw P1505n $tempnode" ++ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", \ ++ ATTRS{idProduct}=="0517", RUN+="/sbin/foo2zjs-loadfw 1000 $tempnode" ++ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", \ ++ ATTRS{idProduct}=="1317", RUN+="/sbin/foo2zjs-loadfw 1005 $tempnode" ++ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", \ ++ ATTRS{idProduct}=="4117", RUN+="/sbin/foo2zjs-loadfw 1018 $tempnode" ++ACTION=="add", KERNEL=="lp*", SUBSYSTEM=="usb", ATTRS{idVendor}=="03f0", \ ++ ATTRS{idProduct}=="2b17", RUN+="/sbin/foo2zjs-loadfw 1020 $tempnode" ++ |