From a55a854916664d897e57a634932fc48937edca5f Mon Sep 17 00:00:00 2001 From: Martin Väth Date: Wed, 19 Jul 2017 16:54:16 +0200 Subject: Make repoman happy --- sys-power/nut/metadata.xml | 20 +-- sys-power/nut/nut-2.7.4-r1.ebuild | 269 ++++++++++++++++++++++++++++++++++++++ sys-power/nut/nut-2.7.4.ebuild | 269 -------------------------------------- 3 files changed, 279 insertions(+), 279 deletions(-) create mode 100644 sys-power/nut/nut-2.7.4-r1.ebuild delete mode 100644 sys-power/nut/nut-2.7.4.ebuild (limited to 'sys-power/nut') diff --git a/sys-power/nut/metadata.xml b/sys-power/nut/metadata.xml index bfe6c746..28063efc 100644 --- a/sys-power/nut/metadata.xml +++ b/sys-power/nut/metadata.xml @@ -1,15 +1,15 @@ - - robbat2@gentoo.org - Robin H. Johnson - - - prometheanfire@gentoo.org - - - Support IPMI-based UPSes. + + robbat2@gentoo.org + Robin H. Johnson + + + prometheanfire@gentoo.org + + + Support IPMI-based UPSes. Driver for Eltek UPS models with AL175 alarm module Driver for UPSes supporting the serial BCM/XCP protocol Driver for Belkin serial UPS equipment @@ -61,5 +61,5 @@ Driver for Eaton / MGE Network Management Card / Proxy (XML/HTTP Protocol) equipment Multi-MIB Driver for SNMP UPS equipment Driver for IPMI Power Supply Units (PSU) - + diff --git a/sys-power/nut/nut-2.7.4-r1.ebuild b/sys-power/nut/nut-2.7.4-r1.ebuild new file mode 100644 index 00000000..6c930d02 --- /dev/null +++ b/sys-power/nut/nut-2.7.4-r1.ebuild @@ -0,0 +1,269 @@ +# Copyright 2017 Gentoo Foundation +# Distributed under the terms of the GNU General Public License v2 + +EAPI=6 +inherit autotools bash-completion-r1 fixheadtails multilib user systemd flag-o-matic toolchain-funcs + +MY_P=${P/_/-} + +DESCRIPTION="Network-UPS Tools" +HOMEPAGE="http://www.networkupstools.org/" +# Nut mirrors are presently broken +SRC_URI="http://random.networkupstools.org/source/${PV%.*}/${MY_P}.tar.gz + http://www.networkupstools.org/source/${PV%.*}/${MY_P}.tar.gz" + +LICENSE="GPL-2" +SLOT="0" +KEYWORDS="~amd64 ~arm ~ppc ~ppc64 ~x86 ~x86-fbsd" + +IUSE="cgi ipmi snmp +usb selinux ssl tcpd xml zeroconf" +CDEPEND=" + cgi? ( >=media-libs/gd-2[png] ) + snmp? ( net-analyzer/net-snmp ) + usb? ( virtual/libusb:0 ) + ssl? ( >=dev-libs/openssl-1 ) + tcpd? ( sys-apps/tcp-wrappers ) + xml? ( >=net-libs/neon-0.25.0 ) + ipmi? ( sys-libs/freeipmi ) + zeroconf? ( net-dns/avahi ) + virtual/udev" +DEPEND="$CDEPEND + >=sys-apps/sed-4 + virtual/pkgconfig" +RDEPEND="${CDEPEND} + !/dev/null + gpasswd -a nut uucp 2>/dev/null + # in some cases on old systems it wasn't in the nut group either! + gpasswd -a nut nut 2>/dev/null + warningmsg ewarn +} + +src_prepare() { + #ht_fix_file configure.in + + eapply "${FILESDIR}/nut-2.7.2/nut-2.7.2-no-libdummy.patch" + eapply -p2 "${FILESDIR}"/${PN}-2.6.2-lowspeed-buffer-size.patch + eapply "${FILESDIR}"/${PN}-2.7.1-snmpusb-order.patch + + sed -e "s:GD_LIBS.*=.*-L/usr/X11R6/lib \(.*\) -lXpm -lX11:GD_LIBS=\"\1:" \ + -e '/systemdsystemunitdir=.*echo.*sed.*libdir/s,^,#,g' \ + -e 's'\''\(systemdsystemshutdowndir="\)${libdir}'\''\1'"${EPREFIX}/lib'" \ + -i configure.ac || die + + sed -e "s:52.nut-usbups.rules:70-nut-usbups.rules:" \ + -i scripts/udev/Makefile.am || die + + rm -f ltmain.sh m4/lt* m4/libtool.m4 + + sed -i \ + -e 's:@LIBSSL_LDFLAGS@:@LIBSSL_LIBS@:' \ + lib/libupsclient{.pc,-config}.in || die #361685 + + eapply_user + eautoreconf +} + +src_configure() { + local myconf + append-flags -fno-lto + tc-export CC + tc-export CXX + tc-export AR + + local UPS_DRIVERS="" + for u in $USE ; do + u2=${u#ups_drivers_} + [[ "${u}" != "${u2}" ]] && UPS_DRIVERS="${UPS_DRIVERS} ${u2}" + done + UPS_DRIVERS="${UPS_DRIVERS# }" UPS_DRIVERS="${UPS_DRIVERS% }" + myconf="${myconf} --with-drivers=${UPS_DRIVERS// /,}" + + use cgi && myconf="${myconf} --with-cgipath=/usr/share/nut/cgi" + + # TODO: USE flag for sys-power/powerman + econf \ + --sysconfdir=/etc/nut \ + --datarootdir=/usr/share/nut \ + --datadir=/usr/share/nut \ + --disable-static \ + --with-statepath=/var/lib/nut \ + --with-drvpath=/$(get_libdir)/nut \ + --with-htmlpath=/usr/share/nut/html \ + --with-user=nut \ + --with-group=nut \ + --with-logfacility=LOG_DAEMON \ + --with-dev \ + --with-serial \ + --without-powerman \ + $(use_with cgi) \ + $(use_with ipmi) \ + $(use_with ipmi freeipmi) \ + $(use_with snmp) \ + $(use_with ssl) \ + $(use_with tcpd wrap) \ + $(use_with usb) \ + $(use_with xml neon) \ + $(use_with zeroconf avahi) \ + --with-systemdsystemunitdir="$(systemd_get_systemunitdir)" \ + ${myconf} +} + +src_install() { + emake DESTDIR="${ED}" install || die + + find "${ED}" -name '*.la' -exec rm -f {} + + + dodir /sbin + dosym ../usr/sbin/upsdrvctl /sbin/upsdrvctl + + if use cgi; then + elog "CGI monitoring scripts are installed in /usr/share/nut/cgi." + elog "copy them to your web server's ScriptPath to activate (this is a" + elog "change from the old location)." + elog "If you use lighttpd, see lighttpd_nut.conf in the documentation." + fi + + # this must be done after all of the install phases + for i in "${D}"/etc/nut/*.sample ; do + mv "${i}" "${i/.sample/}" + done + + dodoc AUTHORS ChangeLog docs/*.txt MAINTAINERS NEWS README TODO UPGRADING || die + + newdoc lib/README README.lib || die + newdoc "${FILESDIR}"/lighttpd_nut.conf-2.2.0 lighttpd_nut.conf || die + + docinto cables + dodoc docs/cables/* || die + + newinitd "${FILESDIR}"/nut-2.6.5-init.d-upsd upsd || die + newinitd "${FILESDIR}"/nut-2.2.2-init.d-upsdrv upsdrv || die + newinitd "${FILESDIR}"/nut-2.6.5-init.d-upsmon upsmon || die + newinitd "${FILESDIR}"/nut-2.6.5-init.d-upslog upslog || die + newinitd "${FILESDIR}"/nut.powerfail.initd nut.powerfail || die + + keepdir /var/lib/nut + + einfo "Setting up permissions on files and directories" + fperms 0700 /var/lib/nut + fowners nut:nut /var/lib/nut + + # Do not remove eval here, because the variables contain shell expansions. + eval fperms 0640 ${NUT_PRIVATE_FILES} + eval fowners root:nut ${NUT_PRIVATE_FILES} + + # Do not remove eval here, because the variables contain shell expansions. + eval fperms 0644 ${NUT_PUBLIC_FILES} + eval fowners root:root ${NUT_PUBLIC_FILES} + + # Do not remove eval here, because the variables contain shell expansions. + if use cgi; then + eval fperms 0644 ${NUT_CGI_FILES} + eval fowners root:root ${NUT_CGI_FILES} + fi + + # this is installed for 2.4 and fbsd guys + if ! has_version virtual/udev; then + einfo "Installing non-udev hotplug support" + insinto /etc/hotplug/usb + insopts -m 755 + doins scripts/hotplug/nut-usbups.hotplug + fi + + dobashcomp "${S}"/scripts/misc/nut.bash_completion +} + +pkg_postinst() { + # this is to ensure that everybody that installed old versions still has + # correct permissions + + chown nut:nut "${ROOT}"/var/lib/nut 2>/dev/null + chmod 0700 "${ROOT}"/var/lib/nut 2>/dev/null + + # Do not remove eval here, because the variables contain shell expansions. + eval chown root:nut "${ROOT}"${NUT_PRIVATE_FILES} 2>/dev/null + eval chmod 0640 "${ROOT}"${NUT_PRIVATE_FILES} 2>/dev/null + + # Do not remove eval here, because the variables contain shell expansions. + eval chown root:root "${ROOT}"${NUT_PUBLIC_FILES} 2>/dev/null + eval chmod 0644 "${ROOT}"${NUT_PUBLIC_FILES} 2>/dev/null + + # Do not remove eval here, because the variables contain shell expansions. + if use cgi; then + eval chown root:root "${ROOT}"${NUT_CGI_FILES} 2>/dev/null + eval chmod 0644 "${ROOT}"${NUT_CGI_FILES} 2>/dev/null + fi + + warningmsg elog +} + +warningmsg() { + msgfunc="$1" + [ -z "$msgfunc" ] && die "msgfunc not specified in call to warningmsg!" + ${msgfunc} "Please note that NUT now runs under the 'nut' user." + ${msgfunc} "NUT is in the uucp group for access to RS-232 UPS." + ${msgfunc} "However if you use a USB UPS you may need to look at the udev or" + ${msgfunc} "hotplug rules that are installed, and alter them suitably." + ${msgfunc} '' + ${msgfunc} "You are strongly advised to read the UPGRADING file provided by upstream." + ${msgfunc} '' + ${msgfunc} "Please note that upsdrv is NOT automatically started by upsd anymore." + ${msgfunc} "If you have multiple UPS units, you can use their NUT names to" + ${msgfunc} "have a service per UPS:" + ${msgfunc} "ln -s /etc/init.d/upsdrv /etc/init.d/upsdrv.\$UPSNAME" + ${msgfunc} '' + ${msgfunc} 'If you want apcupsd to power off your UPS when it' + ${msgfunc} 'shuts down your system in a power failure, you must' + ${msgfunc} 'add nut.powerfail to your shutdown runlevel:' + ${msgfunc} '' + ${msgfunc} 'rc-update add nut.powerfail shutdown' + ${msgfunc} '' + +} diff --git a/sys-power/nut/nut-2.7.4.ebuild b/sys-power/nut/nut-2.7.4.ebuild deleted file mode 100644 index acf8a9b5..00000000 --- a/sys-power/nut/nut-2.7.4.ebuild +++ /dev/null @@ -1,269 +0,0 @@ -# Copyright 2017 Gentoo Foundation -# Distributed under the terms of the GNU General Public License v2 - -EAPI=6 -inherit autotools bash-completion-r1 fixheadtails multilib user systemd flag-o-matic toolchain-funcs - -MY_P=${P/_/-} - -DESCRIPTION="Network-UPS Tools" -HOMEPAGE="http://www.networkupstools.org/" -# Nut mirrors are presently broken -SRC_URI="http://random.networkupstools.org/source/${PV%.*}/${MY_P}.tar.gz - http://www.networkupstools.org/source/${PV%.*}/${MY_P}.tar.gz" - -LICENSE="GPL-2" -SLOT="0" -KEYWORDS="~amd64 ~arm ~ppc ~ppc64 ~x86 ~x86-fbsd" - -IUSE="cgi ipmi snmp +usb selinux ssl tcpd xml zeroconf" -CDEPEND=" - cgi? ( >=media-libs/gd-2[png] ) - snmp? ( net-analyzer/net-snmp ) - usb? ( virtual/libusb:0 ) - ssl? ( >=dev-libs/openssl-1 ) - tcpd? ( sys-apps/tcp-wrappers ) - xml? ( >=net-libs/neon-0.25.0 ) - ipmi? ( sys-libs/freeipmi ) - zeroconf? ( net-dns/avahi ) - virtual/udev" -DEPEND="$CDEPEND - >=sys-apps/sed-4 - virtual/pkgconfig" -RDEPEND="${CDEPEND} - !/dev/null - gpasswd -a nut uucp 2>/dev/null - # in some cases on old systems it wasn't in the nut group either! - gpasswd -a nut nut 2>/dev/null - warningmsg ewarn -} - -src_prepare() { - #ht_fix_file configure.in - - eapply "${FILESDIR}/nut-2.7.2/nut-2.7.2-no-libdummy.patch" - eapply -p2 "${FILESDIR}"/${PN}-2.6.2-lowspeed-buffer-size.patch - eapply "${FILESDIR}"/${PN}-2.7.1-snmpusb-order.patch - - sed -e "s:GD_LIBS.*=.*-L/usr/X11R6/lib \(.*\) -lXpm -lX11:GD_LIBS=\"\1:" \ - -e '/systemdsystemunitdir=.*echo.*sed.*libdir/s,^,#,g' \ - -e 's'\''\(systemdsystemshutdowndir="\)${libdir}'\''\1'"${EPREFIX}/lib'" \ - -i configure.ac || die - - sed -e "s:52.nut-usbups.rules:70-nut-usbups.rules:" \ - -i scripts/udev/Makefile.am || die - - rm -f ltmain.sh m4/lt* m4/libtool.m4 - - sed -i \ - -e 's:@LIBSSL_LDFLAGS@:@LIBSSL_LIBS@:' \ - lib/libupsclient{.pc,-config}.in || die #361685 - - eapply_user - eautoreconf -} - -src_configure() { - local myconf - append-flags -fno-lto - tc-export CC - tc-export CXX - tc-export AR - - local UPS_DRIVERS="" - for u in $USE ; do - u2=${u#ups_drivers_} - [[ "${u}" != "${u2}" ]] && UPS_DRIVERS="${UPS_DRIVERS} ${u2}" - done - UPS_DRIVERS="${UPS_DRIVERS# }" UPS_DRIVERS="${UPS_DRIVERS% }" - myconf="${myconf} --with-drivers=${UPS_DRIVERS// /,}" - - use cgi && myconf="${myconf} --with-cgipath=/usr/share/nut/cgi" - - # TODO: USE flag for sys-power/powerman - econf \ - --sysconfdir=/etc/nut \ - --datarootdir=/usr/share/nut \ - --datadir=/usr/share/nut \ - --disable-static \ - --with-statepath=/var/lib/nut \ - --with-drvpath=/$(get_libdir)/nut \ - --with-htmlpath=/usr/share/nut/html \ - --with-user=nut \ - --with-group=nut \ - --with-logfacility=LOG_DAEMON \ - --with-dev \ - --with-serial \ - --without-powerman \ - $(use_with cgi) \ - $(use_with ipmi) \ - $(use_with ipmi freeipmi) \ - $(use_with snmp) \ - $(use_with ssl) \ - $(use_with tcpd wrap) \ - $(use_with usb) \ - $(use_with xml neon) \ - $(use_with zeroconf avahi) \ - --with-systemdsystemunitdir="$(systemd_get_systemunitdir)" \ - ${myconf} -} - -src_install() { - emake DESTDIR="${D}" install || die - - find "${D}" -name '*.la' -exec rm -f {} + - - dodir /sbin - dosym /usr/sbin/upsdrvctl /sbin/upsdrvctl - - if use cgi; then - elog "CGI monitoring scripts are installed in /usr/share/nut/cgi." - elog "copy them to your web server's ScriptPath to activate (this is a" - elog "change from the old location)." - elog "If you use lighttpd, see lighttpd_nut.conf in the documentation." - fi - - # this must be done after all of the install phases - for i in "${D}"/etc/nut/*.sample ; do - mv "${i}" "${i/.sample/}" - done - - dodoc AUTHORS ChangeLog docs/*.txt MAINTAINERS NEWS README TODO UPGRADING || die - - newdoc lib/README README.lib || die - newdoc "${FILESDIR}"/lighttpd_nut.conf-2.2.0 lighttpd_nut.conf || die - - docinto cables - dodoc docs/cables/* || die - - newinitd "${FILESDIR}"/nut-2.6.5-init.d-upsd upsd || die - newinitd "${FILESDIR}"/nut-2.2.2-init.d-upsdrv upsdrv || die - newinitd "${FILESDIR}"/nut-2.6.5-init.d-upsmon upsmon || die - newinitd "${FILESDIR}"/nut-2.6.5-init.d-upslog upslog || die - newinitd "${FILESDIR}"/nut.powerfail.initd nut.powerfail || die - - keepdir /var/lib/nut - - einfo "Setting up permissions on files and directories" - fperms 0700 /var/lib/nut - fowners nut:nut /var/lib/nut - - # Do not remove eval here, because the variables contain shell expansions. - eval fperms 0640 ${NUT_PRIVATE_FILES} - eval fowners root:nut ${NUT_PRIVATE_FILES} - - # Do not remove eval here, because the variables contain shell expansions. - eval fperms 0644 ${NUT_PUBLIC_FILES} - eval fowners root:root ${NUT_PUBLIC_FILES} - - # Do not remove eval here, because the variables contain shell expansions. - if use cgi; then - eval fperms 0644 ${NUT_CGI_FILES} - eval fowners root:root ${NUT_CGI_FILES} - fi - - # this is installed for 2.4 and fbsd guys - if ! has_version virtual/udev; then - einfo "Installing non-udev hotplug support" - insinto /etc/hotplug/usb - insopts -m 755 - doins scripts/hotplug/nut-usbups.hotplug - fi - - dobashcomp "${S}"/scripts/misc/nut.bash_completion -} - -pkg_postinst() { - # this is to ensure that everybody that installed old versions still has - # correct permissions - - chown nut:nut "${ROOT}"/var/lib/nut 2>/dev/null - chmod 0700 "${ROOT}"/var/lib/nut 2>/dev/null - - # Do not remove eval here, because the variables contain shell expansions. - eval chown root:nut "${ROOT}"${NUT_PRIVATE_FILES} 2>/dev/null - eval chmod 0640 "${ROOT}"${NUT_PRIVATE_FILES} 2>/dev/null - - # Do not remove eval here, because the variables contain shell expansions. - eval chown root:root "${ROOT}"${NUT_PUBLIC_FILES} 2>/dev/null - eval chmod 0644 "${ROOT}"${NUT_PUBLIC_FILES} 2>/dev/null - - # Do not remove eval here, because the variables contain shell expansions. - if use cgi; then - eval chown root:root "${ROOT}"${NUT_CGI_FILES} 2>/dev/null - eval chmod 0644 "${ROOT}"${NUT_CGI_FILES} 2>/dev/null - fi - - warningmsg elog -} - -warningmsg() { - msgfunc="$1" - [ -z "$msgfunc" ] && die "msgfunc not specified in call to warningmsg!" - ${msgfunc} "Please note that NUT now runs under the 'nut' user." - ${msgfunc} "NUT is in the uucp group for access to RS-232 UPS." - ${msgfunc} "However if you use a USB UPS you may need to look at the udev or" - ${msgfunc} "hotplug rules that are installed, and alter them suitably." - ${msgfunc} '' - ${msgfunc} "You are strongly advised to read the UPGRADING file provided by upstream." - ${msgfunc} '' - ${msgfunc} "Please note that upsdrv is NOT automatically started by upsd anymore." - ${msgfunc} "If you have multiple UPS units, you can use their NUT names to" - ${msgfunc} "have a service per UPS:" - ${msgfunc} "ln -s /etc/init.d/upsdrv /etc/init.d/upsdrv.\$UPSNAME" - ${msgfunc} '' - ${msgfunc} 'If you want apcupsd to power off your UPS when it' - ${msgfunc} 'shuts down your system in a power failure, you must' - ${msgfunc} 'add nut.powerfail to your shutdown runlevel:' - ${msgfunc} '' - ${msgfunc} 'rc-update add nut.powerfail shutdown' - ${msgfunc} '' - -} -- cgit v1.2.3-65-gdbad