summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat (limited to 'syscp/patches/gentoo-config-files/bind/gentoo/courier/etc_courier-imap_pop3d-ssl')
-rw-r--r--syscp/patches/gentoo-config-files/bind/gentoo/courier/etc_courier-imap_pop3d-ssl186
1 files changed, 0 insertions, 186 deletions
diff --git a/syscp/patches/gentoo-config-files/bind/gentoo/courier/etc_courier-imap_pop3d-ssl b/syscp/patches/gentoo-config-files/bind/gentoo/courier/etc_courier-imap_pop3d-ssl
deleted file mode 100644
index a0267a0..0000000
--- a/syscp/patches/gentoo-config-files/bind/gentoo/courier/etc_courier-imap_pop3d-ssl
+++ /dev/null
@@ -1,186 +0,0 @@
-##VERSION: $Id: pop3d-ssl.dist.in,v 1.12 2004/10/21 00:45:35 mrsam Exp $
-#
-# pop3d-ssl created from pop3d-ssl.dist by sysconftool
-#
-# Do not alter lines that begin with ##, they are used when upgrading
-# this configuration.
-#
-# Copyright 2000-2004 Double Precision, Inc. See COPYING for
-# distribution information.
-#
-# This configuration file sets various options for the Courier-IMAP server
-# when used to handle SSL POP3 connections.
-#
-# SSL and non-SSL connections are handled by a dedicated instance of the
-# couriertcpd daemon. If you are accepting both SSL and non-SSL POP3
-# connections, you will start two instances of couriertcpd, one on the
-# POP3 port 110, and another one on the POP3-SSL port 995.
-#
-# Download OpenSSL from http://www.openssl.org/
-#
-##NAME: SSLPORT:0
-#
-# Options in the pop3d-ssl configuration file AUGMENT the options in the
-# pop3d configuration file. First the pop3d configuration file is read,
-# then the pop3d-ssl configuration file, so we do not have to redefine
-# anything.
-#
-# However, some things do have to be redefined. The port number is
-# specified by SSLPORT, instead of PORT. The default port is port 995.
-#
-# Multiple port numbers can be separated by commas. When multiple port
-# numbers are used it is possibly to select a specific IP address for a
-# given port as "ip.port". For example, "127.0.0.1.900,192.68.0.1.900"
-# accepts connections on port 900 on IP addresses 127.0.0.1 and 192.68.0.1
-# The SSLADDRESS setting is a default for ports that do not have
-# a specified IP address.
-
-SSLPORT=995
-
-##NAME: SSLADDRESS:0
-#
-# Address to listen on, can be set to a single IP address.
-#
-# SSLADDRESS=127.0.0.1
-
-SSLADDRESS=0
-
-##NAME: SSLPIDFILE:0
-#
-#
-#
-
-SSLPIDFILE=/var/run/pop3d-ssl.pid
-
-##NAME: POP3DSSLSTART:0
-#
-# Whether or not to start POP3 over SSL on spop3 port:
-
-POP3DSSLSTART=YES
-
-##NAME: POP3_STARTTLS:0
-#
-# Whether or not to implement the POP3 STLS extension:
-
-POP3_STARTTLS=YES
-
-##NAME: POP3_TLS_REQUIRED:1
-#
-# Set POP3_TLS_REQUIRED to 1 if you REQUIRE STARTTLS for everyone.
-# (this option advertises the LOGINDISABLED POP3 capability, until STARTTLS
-# is issued).
-
-POP3_TLS_REQUIRED=0
-
-##NAME: COURIERTLS:0
-#
-# The following variables configure POP3 over SSL. If OpenSSL is available
-# during configuration, the couriertls helper gets compiled, and upon
-# installation a dummy TLS_CERTFILE gets generated. courieresmtpd will
-# automatically advertise the ESMTP STARTTLS extension if both TLS_CERTFILE
-# and COURIERTLS exist.
-#
-# WARNING: Peer certificate verification has NOT yet been tested. Proceed
-# at your own risk. Only the basic SSL/TLS functionality is known to be
-# working. Keep this in mind as you play with the following variables.
-
-COURIERTLS=/usr/sbin/couriertls
-
-##NAME: TLS_PROTOCOL:0
-#
-# TLS_PROTOCOL sets the protocol version. The possible versions are:
-#
-# SSL2 - SSLv2
-# SSL3 - SSLv3
-# TLS1 - TLS1
-
-TLS_PROTOCOL=SSL3
-
-##NAME: TLS_STARTTLS_PROTOCOL:0
-#
-# TLS_STARTTLS_PROTOCOL is used instead of TLS_PROTOCOL for the POP3 STARTTLS
-# extension, as opposed to POP3 over SSL on port 995.
-#
-
-TLS_STARTTLS_PROTOCOL=TLS1
-
-##NAME: TLS_CIPHER_LIST:0
-#
-# TLS_CIPHER_LIST optionally sets the list of ciphers to be used by the
-# OpenSSL library. In most situations you can leave TLS_CIPHER_LIST
-# undefined
-#
-# TLS_CIPHER_LIST="ALL:!ADH:RC4+RSA:+SSLv2:@STRENGTH"
-
-##NAME: TLS_TIMEOUT:0
-# TLS_TIMEOUT is currently not implemented, and reserved for future use.
-# This is supposed to be an inactivity timeout, but its not yet implemented.
-#
-
-##NAME: TLS_DHCERTFILE:0
-#
-# TLS_DHCERTFILE - PEM file that stores our Diffie-Hellman cipher pair.
-# When OpenSSL is compiled to use Diffie-Hellman ciphers instead of RSA
-# you must generate a DH pair that will be used. In most situations the
-# DH pair is to be treated as confidential, and the file specified by
-# TLS_DHCERTFILE must not be world-readable.
-#
-# TLS_DHCERTFILE=
-
-##NAME: TLS_CERTFILE:0
-#
-# TLS_CERTFILE - certificate to use. TLS_CERTFILE is required for SSL/TLS
-# servers, and is optional for SSL/TLS clients. TLS_CERTFILE is usually
-# treated as confidential, and must not be world-readable.
-#
-TLS_CERTFILE=/etc/ssl/server/<SERVERNAME>.crt_and_key
-
-##NAME: TLS_TRUSTCERTS:0
-#
-# TLS_TRUSTCERTS=pathname - load trusted certificates from pathname.
-# pathname can be a file or a directory. If a file, the file should
-# contain a list of trusted certificates, in PEM format. If a
-# directory, the directory should contain the trusted certificates,
-# in PEM format, one per file and hashed using OpenSSL's c_rehash
-# script. TLS_TRUSTCERTS is used by SSL/TLS clients (by specifying
-# the -domain option) and by SSL/TLS servers (TLS_VERIFYPEER is set
-# to PEER or REQUIREPEER).
-#
-#
-# TLS_TRUSTCERTS=
-
-##NAME: TLS_VERIFYPEER:0
-#
-# TLS_VERIFYPEER - how to verify client certificates. The possible values of
-# this setting are:
-#
-# NONE - do not verify anything
-#
-# PEER - verify the client certificate, if one's presented
-#
-# REQUIREPEER - require a client certificate, fail if one's not presented
-#
-#
-TLS_VERIFYPEER=NONE
-
-##NAME: TLS_CACHE:0
-#
-# A TLS/SSL session cache may slightly improve response for long-running
-# POP3 clients. TLS_CACHEFILE will be automatically created, TLS_CACHESIZE
-# bytes long, and used as a cache buffer.
-#
-# This is an experimental feature and should be disabled if it causes
-# problems with SSL clients. Disable SSL caching by commenting out the
-# following settings:
-
-TLS_CACHEFILE=/var/lib/courier-imap/couriersslcache
-TLS_CACHESIZE=524288
-
-##NAME: MAILDIRPATH:0
-#
-# MAILDIRPATH - directory name of the maildir directory.
-#
-MAILDIRPATH=Maildir
-
-#Hardwire a value for ${MAILDIR}
-MAILDIRPATH=.maildir