sys-boot/grub: Drop modified old grub version, no longer in main tree

Signed-off-by: Thomas Sachau <tommy@gentoo.org>

5 files changed, 0 insertions, 614 deletions

diff --git a/sys-boot/grub/Manifest b/sys-boot/grub/Manifest
deleted file mode 100644
index 706a01bc3..000000000
--- a/sys-boot/grub/Manifest
+++ /dev/null
@@ -1,8 +0,0 @@
-AUX grub.conf.gentoo 591 SHA256 e656b5716d6a5904a035960b460494431d8c1327df51fcd9ffb39243425fe142 SHA512 23036b9e558b604082d9ae8c848f18ea552181416937e3ef62287e53c38086b8d7ffef0e67d04af04f05f5b23c6da7aaf1f1f23e0ee1cffd5dbd5320e8648cb1 WHIRLPOOL 184284cac00bc039d36c5b2f8d7be0f425e75ba904c4c04c2ec531a094cd191c42cb7382276e73a5d176e1661dcdd1bdc5e3806b9d7abe9b38563575ecb6ee76
-DIST grub-0.97-patches-1.12.tar.bz2 55811 SHA256 80cedf74d29e334182d8fb906035d2c365b96b6e8a09bbe800f44f98c828ac97
-DIST grub-0.97-patches-1.14.tar.bz2 52916 SHA256 5c7ca31fd9b2123471daf2e46a1936c4044ad0c12e353d9d3d8c3f83a1c7a0e5 SHA512 d9a8d420fd5a36f181ca608f9b70be90f9d82cee66c8484636fda5085290586071b5d9379d917e8141b993ffc4777859cd02971c916d6167dca6f50d83282c26 WHIRLPOOL 60abd5087e85d9969784b9f5a100934606a76da03b665533d9d4d1d13f4e2d15de233a71e67a32d18a5fbfe128c2c8bf04c0d4451de24e6ca4fbd8dd862e23ea
-DIST grub-0.97.tar.gz 971783 SHA256 4e1d15d12dbd3e9208111d6b806ad5a9857ca8850c47877d36575b904559260b SHA512 c2bc9ffc8583aeae71cee9ddcc4418969768d4e3764d47307da54f93981c0109fb07d84b061b3a3628bd00ba4d14a54742bc04848110eb3ae8ca25dbfbaabadb WHIRLPOOL 0ad7f5dc035e2a3ad5fd29b6388f06fd12a8cc694117b4cbd42b5302433aa522db23566222d35219fe17fb95edb5090553156198507f70208eda5d858fd52dd5
-DIST splash.xpm.gz 33856 SHA256 b95600f777331b0dd31d51c68f60f0e846e4c8b628857a41165f4e6b30e6acaf SHA512 5ae1f786f7d46a95a7061068d5b2b3ad64607c7b190d6f28379508c5dce67e26308325bfd637542a84855dfcf1ea3d143947326fdb189a6a8972208d3ead23da WHIRLPOOL d95b7b588ea8ac7c2c8c53eb8057aef21c825da6411afe3b7e864c606aeffaaebce8ae41ce3e979f277bd6b48a9e82a1f2ea8afc836213b56523d8a854227d7b
-EBUILD grub-0.97-r10.ebuild 9400 SHA256 2fa87730cb24815067906705aca056a899dd48f42623127abc0bb736a54c769a SHA512 a33fba52bdea688dc7c483b3130aa547dc2284d30c62e67e19d81dab45f8ce21300eefa7d594149535d2ce3113776a39bce258ba5c070d0ac43c62da170ffdf5 WHIRLPOOL 994c6a7653d7fc1ec5e1658ca7e0306e1a9b689914df5b4a977399af4c9cbeac834251510566715eb2f48e44810966e16eb82b5a7d1aee888f6d15a5bb3a8914
-EBUILD grub-0.97-r14.ebuild 9203 SHA256 3e7ff7cfb1602577ed23788f2267b4f8aeb168cbd392813e3bcbea0dfc047200 SHA512 5a321126ff9d30551f5ea7ab22dc318e8c1b77a10d855268504762a1c0f5f1e1a0e2f119c837b37b4b16e5f33fd322840d8bdf37943d1a778bc0983c76464f0a WHIRLPOOL 69af838a47fae54ab17c6a0791a2c8f40913493f899d908b04bb4a8e428942c9d35c3e380f654b15b13591c376bc8cd33cebe133da65b6844364b03cef29f771
-MISC metadata.xml 342 SHA256 af2c5801517ebc9cd93377058185f6ec448c036703e6ba189d7afd86f61b8e47 SHA512 bb1798fe58a844d43cf3051e1e27bdbf51bb6a7229f594fd249efe36e1e675d49f05ce94206d80acecddec0efd4a9b64f6bf34d287164980afb81c7c082edec9 WHIRLPOOL c5fe35fb98ea7bab573bde308e8251134a960c394a609afaa4b7334d70f7671e15c22ae0636f51bc090706cace4162a67a107ab7b90dc555c7c45901e37742c9
diff --git a/sys-boot/grub/files/grub.conf.gentoo b/sys-boot/grub/files/grub.conf.gentoo
deleted file mode 100644
index 984470b38..000000000
--- a/sys-boot/grub/files/grub.conf.gentoo
+++ /dev/null
@@ -1,16 +0,0 @@
-# This is a sample grub.conf for use with Genkernel, per the Gentoo handbook
-# http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=1&chap=10#doc_chap2
-# If you are not using Genkernel and you need help creating this file, you
-# should consult the handbook. Alternatively, consult the grub.conf.sample that
-# is included with the Grub documentation.
-
-default 0
-timeout 30
-#splashimage=(hd0,0)/boot/grub/splash.xpm.gz
-
-#title Gentoo Linux 3.8.13
-#root (hd0,0)
-#kernel /boot/kernel-genkernel-x86-3.8.13-gentoo root=/dev/sda3
-#initrd /boot/initramfs-genkernel-x86-3.8.13
-
-# vim:ft=conf:
diff --git a/sys-boot/grub/grub-0.97-r10.ebuild b/sys-boot/grub/grub-0.97-r10.ebuild
deleted file mode 100644
index 03583f9b0..000000000
--- a/sys-boot/grub/grub-0.97-r10.ebuild
+++ /dev/null
@@ -1,290 +0,0 @@
-# Copyright 1999-2012 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-boot/grub/grub-0.97-r10.ebuild,v 1.13 2012/02/29 23:09:30 floppym Exp $
-
-# XXX: we need to review menu.lst vs grub.conf handling.  We've been converting
-#      all systems to grub.conf (and symlinking menu.lst to grub.conf), but
-#      we never updated any of the source code (it still all wants menu.lst),
-#      and there is no indication that upstream is making the transition.
-
-# If you need to roll a new grub-static distfile, here is how.
-# - Robin H. Johnson <robbat2@gentoo.org> - 29 Nov 2010
-# USE='static -ncurses -netboot -custom-cflags' \
-# GRUB_STATIC_PACKAGE_BUILDING=1 ebuild \
-# grub-${PVR}.ebuild package && \
-# cp -f ${PKGDIR}/${CAT}/${PF}.tbz2 ${DISTDIR}/grub-static-${PVR}.tar.bz2
-
-inherit mount-boot eutils flag-o-matic toolchain-funcs autotools linux-info pax-utils
-
-PATCHVER="1.12" # Should match the revision ideally
-DESCRIPTION="GNU GRUB Legacy boot loader"
-HOMEPAGE="http://www.gnu.org/software/grub/"
-SRC_URI="mirror://gentoo/${P}.tar.gz
-	mirror://gnu-alpha/${PN}/${P}.tar.gz
-	mirror://gentoo/splash.xpm.gz
-	mirror://gentoo/${P}-patches-${PATCHVER}.tar.bz2"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 x86 ~x86-fbsd"
-IUSE="custom-cflags ncurses netboot static"
-
-RDEPEND="ncurses? (
-		>=sys-libs/ncurses-5.2-r5
-	)"
-DEPEND="${RDEPEND}"
-
-pkg_setup() {
-	local arch="$(tc-arch)"
-	case ${arch} in
-		amd64) CONFIG_CHECK='~IA32_EMULATION' check_extra_config ;;
-	esac
-}
-
-src_unpack() {
-	unpack ${A}
-	cd "${S}"
-
-	# patch breaks booting for some people #111885
-	rm "${WORKDIR}"/patch/400_*reiser4*
-
-	# Grub will not handle a kernel larger than EXTENDED_MEMSIZE Mb as
-	# discovered in bug 160801. We can change this, however, using larger values
-	# for this variable means that Grub needs more memory to run and boot. For a
-	# kernel of size N, Grub needs (N+1)*2.  Advanced users should set a custom
-	# value in make.conf, it is possible to make kernels ~16Mb in size, but it
-	# needs the kitchen sink built-in.
-	local t="custom"
-	if [[ -z ${GRUB_MAX_KERNEL_SIZE} ]] ; then
-		case $(tc-arch) in
-			amd64) GRUB_MAX_KERNEL_SIZE=9 ;;
-			x86)   GRUB_MAX_KERNEL_SIZE=5 ;;
-		esac
-		t="default"
-	fi
-	einfo "Grub will support the ${t} maximum kernel size of ${GRUB_MAX_KERNEL_SIZE} Mb (GRUB_MAX_KERNEL_SIZE)"
-
-	sed -i \
-		-e "/^#define.*EXTENDED_MEMSIZE/s,3,${GRUB_MAX_KERNEL_SIZE},g" \
-		"${S}"/grub/asmstub.c \
-		|| die "Failed to hack memory size"
-
-	if [[ -n ${PATCHVER} ]] ; then
-		EPATCH_SUFFIX="patch"
-		epatch "${WORKDIR}"/patch
-		eautoreconf
-	fi
-}
-
-src_compile() {
-	filter-flags -fPIE #168834
-
-	use amd64 && multilib_toolchain_setup x86
-
-	unset BLOCK_SIZE #73499
-
-	### i686-specific code in the boot loader is a bad idea; disabling to ensure
-	### at least some compatibility if the hard drive is moved to an older or
-	### incompatible system.
-
-	# grub-0.95 added -fno-stack-protector detection, to disable ssp for stage2,
-	# but the objcopy's (faulty) test fails if -fstack-protector is default.
-	# create a cache telling configure that objcopy is ok, and add -C to econf
-	# to make use of the cache.
-	#
-	# CFLAGS has to be undefined running econf, else -fno-stack-protector detection fails.
-	# STAGE2_CFLAGS is not allowed to be used on emake command-line, it overwrites
-	# -fno-stack-protector detected by configure, removed from netboot's emake.
-	use custom-cflags || unset CFLAGS
-
-	export grub_cv_prog_objcopy_absolute=yes #79734
-	use static && append-ldflags -static
-
-	# Per bug 216625, the emul packages do not provide .a libs for performing
-	# suitable static linking
-	if use amd64 && use static ; then
-		if [ -z "${GRUB_STATIC_PACKAGE_BUILDING}" ]; then
-			die "You must use the grub-static package if you want a static Grub on amd64!"
-		else
-			eerror "You have set GRUB_STATIC_PACKAGE_BUILDING. This"
-			eerror "is specifically intended for building the tarballs for the"
-			eerror "grub-static package via USE='static -ncurses'."
-			eerror "All bets are now off."
-			ebeep 10
-		fi
-	fi
-
-	# build the net-bootable grub first, but only if "netboot" is set
-	if use netboot ; then
-		econf \
-		--libdir=/lib \
-		--datadir=/usr/lib/grub \
-		--exec-prefix=/ \
-		--disable-auto-linux-mem-opt \
-		--enable-diskless \
-		--enable-{3c{5{03,07,09,29,95},90x},cs89x0,davicom,depca,eepro{,100}} \
-		--enable-{epic100,exos205,ni5210,lance,ne2100,ni{50,65}10,natsemi} \
-		--enable-{ne,ns8390,wd,otulip,rtl8139,sis900,sk-g16,smc9000,tiara} \
-		--enable-{tulip,via-rhine,w89c840} || die "netboot econf failed"
-
-		emake w89c840_o_CFLAGS="-O" || die "making netboot stuff"
-
-		mv -f stage2/{nbgrub,pxegrub} "${S}"/
-		mv -f stage2/stage2 stage2/stage2.netboot
-
-		make clean || die "make clean failed"
-	fi
-
-	# Now build the regular grub
-	# Note that FFS and UFS2 support are broken for now - stage1_5 files too big
-	econf \
-		--libdir=/lib \
-		--datadir=/usr/lib/grub \
-		--exec-prefix=/ \
-		--disable-auto-linux-mem-opt \
-		$(use_with ncurses curses) \
-		|| die "econf failed"
-
-	# sanity check due to common failure
-	use ncurses && ! grep -qs "HAVE_LIBCURSES.*1" config.h && die "USE=ncurses but curses not found"
-
-	emake || die "making regular stuff"
-}
-
-src_test() {
-	# non-default block size also give false pass/fails.
-	unset BLOCK_SIZE
-	make check || die "make check failed"
-}
-
-src_install() {
-	emake DESTDIR="${D}" install || die
-	if use netboot ; then
-		exeinto /usr/lib/grub/${CHOST}
-		doexe nbgrub pxegrub stage2/stage2.netboot || die "netboot install"
-	fi
-
-	# bug 330745
-	pax-mark -m "${D}"/sbin/grub
-
-	dodoc AUTHORS BUGS ChangeLog NEWS README THANKS TODO
-	newdoc docs/menu.lst grub.conf.sample
-	dodoc "${FILESDIR}"/grub.conf.gentoo
-	prepalldocs
-
-	[ -n "${GRUB_STATIC_PACKAGE_BUILDING}" ] && \
-		mv \
-		"${D}"/usr/share/doc/${PF} \
-		"${D}"/usr/share/doc/grub-static-${PF/grub-}
-
-	insinto /usr/share/grub
-	doins "${DISTDIR}"/splash.xpm.gz
-}
-
-setup_boot_dir() {
-	local boot_dir=$1
-	local dir=${boot_dir}
-
-	mkdir -p "${dir}"
-	[[ ! -L ${dir}/boot ]] && ln -s . "${dir}/boot"
-	dir="${dir}/grub"
-	if [[ ! -e ${dir} ]] ; then
-		mkdir "${dir}" || die "${dir} does not exist!"
-	fi
-
-	# change menu.lst to grub.conf
-	if [[ ! -e ${dir}/grub.conf ]] && [[ -e ${dir}/menu.lst ]] ; then
-		mv -f "${dir}"/menu.lst "${dir}"/grub.conf
-		ewarn
-		ewarn "*** IMPORTANT NOTE: menu.lst has been renamed to grub.conf"
-		ewarn
-	fi
-
-	if [[ ! -e ${dir}/menu.lst ]]; then
-		einfo "Linking from new grub.conf name to menu.lst"
-		ln -snf grub.conf "${dir}"/menu.lst
-	fi
-
-	if [[ -e ${dir}/stage2 ]] ; then
-		mv "${dir}"/stage2{,.old}
-		ewarn "*** IMPORTANT NOTE: you must run grub and install"
-		ewarn "the new version's stage1 to your MBR.  Until you do,"
-		ewarn "stage1 and stage2 will still be the old version, but"
-		ewarn "later stages will be the new version, which could"
-		ewarn "cause problems such as an unbootable system."
-		ewarn "This means you must use either grub-install or perform"
-		ewarn "root/setup manually! For more help, see the handbook:"
-		ewarn "http://www.gentoo.org/doc/en/handbook/handbook-${ARCH}.xml?part=1&chap=10#grub-install-auto"
-		ebeep
-	fi
-
-	einfo "Copying files from /lib/grub, /usr/lib/grub and /usr/share/grub to ${dir}"
-	for x in \
-		"${ROOT}"/lib*/grub/*/* \
-		"${ROOT}"/usr/lib*/grub/*/* \
-		"${ROOT}"/usr/share/grub/* ; do
-		[[ -f ${x} ]] && cp -p "${x}" "${dir}"/
-	done
-
-	if [[ ! -e ${dir}/grub.conf ]] ; then
-		s="${ROOT}/usr/share/doc/${PF}/grub.conf.gentoo"
-		[[ -e "${s}" ]] && cat "${s}" >${dir}/grub.conf
-		[[ -e "${s}.gz" ]] && zcat "${s}.gz" >${dir}/grub.conf
-		[[ -e "${s}.bz2" ]] && bzcat "${s}.bz2" >${dir}/grub.conf
-	fi
-
-	# Per bug 218599, we support grub.conf.install for users that want to run a
-	# specific set of Grub setup commands rather than the default ones.
-	grub_config=${dir}/grub.conf.install
-	[[ -e ${grub_config} ]] || grub_config=${dir}/grub.conf
-	if [[ -e ${grub_config} ]] ; then
-		egrep \
-			-v '^[[:space:]]*(#|$|default|fallback|initrd|password|splashimage|timeout|title)' \
-			"${grub_config}" | \
-		/sbin/grub --batch \
-			--device-map="${dir}"/device.map \
-			> /dev/null
-	fi
-
-	# the grub default commands silently piss themselves if
-	# the default file does not exist ahead of time
-	if [[ ! -e ${dir}/default ]] ; then
-		grub-set-default --root-directory="${boot_dir}" default
-	fi
-	einfo "Grub has been installed to ${boot_dir} successfully."
-}
-
-pkg_postinst() {
-	mount-boot_mount_boot_partition
-
-	if [[ -n ${DONT_MOUNT_BOOT} ]]; then
-		elog "WARNING: you have DONT_MOUNT_BOOT in effect, so you must apply"
-		elog "the following instructions for your /boot!"
-		elog "Neglecting to do so may cause your system to fail to boot!"
-		elog
-	else
-		setup_boot_dir "${ROOT}"/boot
-		# Trailing output because if this is run from pkg_postinst, it gets mixed into
-		# the other output.
-		einfo ""
-	fi
-	elog "To interactively install grub files to another device such as a USB"
-	elog "stick, just run the following and specify the directory as prompted:"
-	elog "   emerge --config =${PF}"
-	elog "Alternately, you can export GRUB_ALT_INSTALLDIR=/path/to/use to tell"
-	elog "grub where to install in a non-interactive way."
-
-	# needs to be after we call setup_boot_dir
-	mount-boot_pkg_postinst
-}
-
-pkg_config() {
-	local dir
-	if [ ! -d "${GRUB_ALT_INSTALLDIR}" ]; then
-		einfo "Enter the directory where you want to setup grub:"
-		read dir
-	else
-		dir="${GRUB_ALT_INSTALLDIR}"
-	fi
-	setup_boot_dir "${dir}"
-}
diff --git a/sys-boot/grub/grub-0.97-r14.ebuild b/sys-boot/grub/grub-0.97-r14.ebuild
deleted file mode 100644
index e852e7b17..000000000
--- a/sys-boot/grub/grub-0.97-r14.ebuild
+++ /dev/null
@@ -1,288 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/sys-boot/grub/grub-0.97-r14.ebuild,v 1.8 2015/06/14 20:36:32 ulm Exp $
-
-# XXX: we need to review menu.lst vs grub.conf handling.  We've been converting
-#      all systems to grub.conf (and symlinking menu.lst to grub.conf), but
-#      we never updated any of the source code (it still all wants menu.lst),
-#      and there is no indication that upstream is making the transition.
-
-# If you need to roll a new grub-static distfile, here is how.
-# - Robin H. Johnson <robbat2@gentoo.org> - 29 Nov 2010
-# FEATURES='-noauto -noinfo -nodoc -noman -splitdebug nostrip' \
-# USE='static -ncurses -netboot -custom-cflags' \
-# PORTAGE_COMPRESS=true GRUB_STATIC_PACKAGE_BUILDING=1 ebuild \
-# grub-${PVR}.ebuild clean package && \
-# qtbz2 -s -j ${PKGDIR}/${CAT}/${PF}.tbz2 && \
-# mv ${PF}.tar.bz2 ${DISTDIR}/grub-static-${PVR}.tar.bz2
-
-EAPI="4"
-
-inherit eutils mount-boot toolchain-funcs linux-info flag-o-matic autotools pax-utils multiprocessing
-
-PATCHVER="1.14" # Should match the revision ideally
-DESCRIPTION="GNU GRUB Legacy boot loader"
-HOMEPAGE="http://www.gnu.org/software/grub/"
-SRC_URI="mirror://gentoo/${P}.tar.gz
-	mirror://gnu-alpha/${PN}/${P}.tar.gz
-	mirror://gentoo/splash.xpm.gz
-	mirror://gentoo/${P}-patches-${PATCHVER}.tar.bz2"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="amd64 x86 ~x86-fbsd"
-IUSE="custom-cflags ncurses netboot static"
-
-LIB_DEPEND="ncurses? (
-		>=sys-libs/ncurses-5.9-r3[static-libs(+)]
-	)"
-RDEPEND="!static? ( ${LIB_DEPEND//\[static-libs(+)\]/} )"
-DEPEND="${RDEPEND}
-	static? ( ${LIB_DEPEND} )"
-
-pkg_setup() {
-	case $(tc-arch) in
-	amd64) CONFIG_CHECK='~IA32_EMULATION' check_extra_config ;;
-	esac
-}
-
-src_prepare() {
-	# Grub will not handle a kernel larger than EXTENDED_MEMSIZE Mb as
-	# discovered in bug 160801. We can change this, however, using larger values
-	# for this variable means that Grub needs more memory to run and boot. For a
-	# kernel of size N, Grub needs (N+1)*2.  Advanced users should set a custom
-	# value in make.conf, it is possible to make kernels ~16Mb in size, but it
-	# needs the kitchen sink built-in.
-	local t="custom"
-	if [[ -z ${GRUB_MAX_KERNEL_SIZE} ]] ; then
-		case $(tc-arch) in
-		amd64) GRUB_MAX_KERNEL_SIZE=9 ;;
-		x86)   GRUB_MAX_KERNEL_SIZE=5 ;;
-		esac
-		t="default"
-	fi
-	einfo "Grub will support the ${t} maximum kernel size of ${GRUB_MAX_KERNEL_SIZE} Mb (GRUB_MAX_KERNEL_SIZE)"
-
-	sed -i \
-		-e "/^#define.*EXTENDED_MEMSIZE/s,3,${GRUB_MAX_KERNEL_SIZE},g" \
-		"${S}"/grub/asmstub.c \
-		|| die
-
-	EPATCH_SUFFIX="patch" epatch "${WORKDIR}"/patch
-	rm -f "${S}"/aclocal.m4 # seems to keep bug 418287 away
-	eautoreconf
-}
-
-src_configure() {
-	filter-flags -fPIE #168834
-
-	use amd64 && multilib_toolchain_setup x86
-
-	unset BLOCK_SIZE #73499
-
-	### i686-specific code in the boot loader is a bad idea; disabling to ensure
-	### at least some compatibility if the hard drive is moved to an older or
-	### incompatible system.
-
-	# grub-0.95 added -fno-stack-protector detection, to disable ssp for stage2,
-	# but the objcopy's (faulty) test fails if -fstack-protector is default.
-	# create a cache telling configure that objcopy is ok, and add -C to econf
-	# to make use of the cache.
-	#
-	# CFLAGS has to be undefined running econf, else -fno-stack-protector detection fails.
-	# STAGE2_CFLAGS is not allowed to be used on emake command-line, it overwrites
-	# -fno-stack-protector detected by configure, removed from netboot's emake.
-	use custom-cflags || unset CFLAGS
-
-	tc-ld-disable-gold #439082 #466536 #526348
-
-	export grub_cv_prog_objcopy_absolute=yes #79734
-	use static && append-ldflags -static
-
-	if use amd64 && use static ; then
-		if [[ -n ${GRUB_STATIC_PACKAGE_BUILDING} ]] ; then
-			eerror "You have set GRUB_STATIC_PACKAGE_BUILDING. This"
-			eerror "is specifically intended for building the tarballs for the"
-			eerror "grub-static package via USE='static -ncurses'."
-			eerror "All bets are now off."
-		fi
-	fi
-
-	multijob_init
-
-	# build the net-bootable grub first, but only if "netboot" is set
-	if use netboot ; then
-		(
-		multijob_child_init
-		mkdir -p "${WORKDIR}"/netboot
-		pushd "${WORKDIR}"/netboot >/dev/null
-		ECONF_SOURCE=${S} \
-		econf \
-			--libdir=/lib \
-			--datadir=/usr/lib/grub \
-			--exec-prefix=/ \
-			--disable-auto-linux-mem-opt \
-			--enable-diskless \
-			--enable-{3c{5{03,07,09,29,95},90x},cs89x0,davicom,depca,eepro{,100}} \
-			--enable-{epic100,exos205,ni5210,lance,ne2100,ni{50,65}10,natsemi} \
-			--enable-{ne,ns8390,wd,otulip,rtl8139,sis900,sk-g16,smc9000,tiara} \
-			--enable-{tulip,via-rhine,w89c840}
-		popd >/dev/null
-		) &
-		multijob_post_fork
-	fi
-
-	# Now build the regular grub
-	# Note that FFS and UFS2 support are broken for now - stage1_5 files too big
-	econf \
-		--libdir=/lib \
-		--datadir=/usr/lib/grub \
-		--exec-prefix=/ \
-		--disable-auto-linux-mem-opt \
-		$(use_with ncurses curses)
-
-	# sanity check due to common failure
-	use ncurses && ! grep -qs "HAVE_LIBCURSES.*1" config.h && die "USE=ncurses but curses not found"
-
-	multijob_finish
-}
-
-src_compile() {
-	use netboot && emake -C "${WORKDIR}"/netboot w89c840_o_CFLAGS="-O"
-	emake
-}
-
-src_test() {
-	# non-default block size also give false pass/fails.
-	unset BLOCK_SIZE
-	emake -j1 check
-}
-
-src_install() {
-	default
-	if use netboot ; then
-		exeinto /usr/lib/grub/${CHOST}
-		doexe "${WORKDIR}"/netboot/stage2/{nbgrub,pxegrub}
-		newexe "${WORKDIR}"/netboot/stage2/stage2 stage2.netboot
-	fi
-
-	pax-mark -m "${D}"/sbin/grub #330745
-
-	newdoc docs/menu.lst grub.conf.sample
-	dodoc "${FILESDIR}"/grub.conf.gentoo
-
-	[[ -n ${GRUB_STATIC_PACKAGE_BUILDING} ]] && \
-		mv "${D}"/usr/share/doc/{${PF},grub-static-${PF/grub-}}
-
-	insinto /usr/share/grub
-	doins "${DISTDIR}"/splash.xpm.gz
-}
-
-setup_boot_dir() {
-	local boot_dir=$1
-	local dir=${boot_dir}
-
-	mkdir -p "${dir}"
-	[[ ! -L ${dir}/boot ]] && ln -s . "${dir}/boot"
-	dir="${dir}/grub"
-	if [[ ! -e ${dir} ]] ; then
-		mkdir "${dir}" || die
-	fi
-
-	# change menu.lst to grub.conf
-	if [[ ! -e ${dir}/grub.conf ]] && [[ -e ${dir}/menu.lst ]] ; then
-		mv -f "${dir}"/menu.lst "${dir}"/grub.conf
-		ewarn "*** IMPORTANT NOTE: menu.lst has been renamed to grub.conf"
-		echo
-	fi
-
-	if [[ ! -e ${dir}/menu.lst ]]; then
-		einfo "Linking from new grub.conf name to menu.lst"
-		ln -snf grub.conf "${dir}"/menu.lst
-	fi
-
-	if [[ -e ${dir}/stage2 ]] ; then
-		mv "${dir}"/stage2{,.old}
-		ewarn "*** IMPORTANT NOTE: you must run grub and install"
-		ewarn "the new version's stage1 to your MBR.  Until you do,"
-		ewarn "stage1 and stage2 will still be the old version, but"
-		ewarn "later stages will be the new version, which could"
-		ewarn "cause problems such as an unbootable system."
-		ewarn
-		ewarn "This means you must use either grub-install or perform"
-		ewarn "root/setup manually."
-		ewarn
-		ewarn "For more help, see the handbook:"
-		ewarn "http://www.gentoo.org/doc/en/handbook/handbook-${ARCH}.xml?part=1&chap=10#grub-install-auto"
-		echo
-	fi
-
-	einfo "Copying files from /lib/grub and /usr/share/grub to ${dir}"
-	for x in \
-		"${ROOT}"/lib*/grub/*/* \
-		"${ROOT}"/usr/share/grub/* ; do
-		[[ -f ${x} ]] && cp -p "${x}" "${dir}"/
-	done
-
-	if [[ ! -e ${dir}/grub.conf ]] ; then
-		s="${ROOT}/usr/share/doc/${PF}/grub.conf.gentoo"
-		[[ -e "${s}" ]] && cat "${s}" >${dir}/grub.conf
-		[[ -e "${s}.gz" ]] && zcat "${s}.gz" >${dir}/grub.conf
-		[[ -e "${s}.bz2" ]] && bzcat "${s}.bz2" >${dir}/grub.conf
-	fi
-
-	# Per bug 218599, we support grub.conf.install for users that want to run a
-	# specific set of Grub setup commands rather than the default ones.
-	grub_config=${dir}/grub.conf.install
-	[[ -e ${grub_config} ]] || grub_config=${dir}/grub.conf
-	if [[ -e ${grub_config} ]] ; then
-		egrep \
-			-v '^[[:space:]]*(#|$|default|fallback|initrd|password|splashimage|timeout|title)' \
-			"${grub_config}" | \
-		/sbin/grub --batch \
-			--device-map="${dir}"/device.map \
-			> /dev/null
-	fi
-
-	# the grub default commands silently piss themselves if
-	# the default file does not exist ahead of time
-	if [[ ! -e ${dir}/default ]] ; then
-		grub-set-default --root-directory="${boot_dir}" default
-	fi
-	einfo "Grub has been installed to ${boot_dir} successfully."
-}
-
-pkg_postinst() {
-	mount-boot_mount_boot_partition
-
-	if [[ -n ${DONT_MOUNT_BOOT} ]]; then
-		elog "WARNING: you have DONT_MOUNT_BOOT in effect, so you must apply"
-		elog "the following instructions for your /boot!"
-		elog "Neglecting to do so may cause your system to fail to boot!"
-		elog
-	else
-		setup_boot_dir "${ROOT}"/boot
-		# Trailing output because if this is run from pkg_postinst, it gets mixed into
-		# the other output.
-		einfo ""
-	fi
-	elog "To interactively install grub files to another device such as a USB"
-	elog "stick, just run the following and specify the directory as prompted:"
-	elog "   emerge --config =${PF}"
-	elog "Alternately, you can export GRUB_ALT_INSTALLDIR=/path/to/use to tell"
-	elog "grub where to install in a non-interactive way."
-
-	# needs to be after we call setup_boot_dir
-	mount-boot_pkg_postinst
-}
-
-pkg_config() {
-	local dir
-	if [ ! -d "${GRUB_ALT_INSTALLDIR}" ]; then
-		einfo "Enter the directory where you want to setup grub:"
-		read dir
-	else
-		dir="${GRUB_ALT_INSTALLDIR}"
-	fi
-	setup_boot_dir "${dir}"
-}
diff --git a/sys-boot/grub/metadata.xml b/sys-boot/grub/metadata.xml
deleted file mode 100644
index 93f7a8f45..000000000
--- a/sys-boot/grub/metadata.xml
+++ /dev/null
@@ -1,12 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<!DOCTYPE pkgmetadata SYSTEM "http://www.gentoo.org/dtd/metadata.dtd">
-<pkgmetadata>
-  <maintainer>
-    <email>binki@gentoo.org</email>
-    <name>Nathan Phillip Brink</name>
-  </maintainer>
-  <maintainer>
-    <email>tommy@gentoo.org</email>
-    <name>Thomas Sachau</name>
-  </maintainer>
-</pkgmetadata>