1 files changed, 0 insertions, 220 deletions
diff --git a/sys-infiniband/openib-drivers/openib-drivers-1.2.5.1.ebuild b/sys-infiniband/openib-drivers/openib-drivers-1.2.5.1.ebuild
deleted file mode 100644
index e639e72d9..000000000
--- a/sys-infiniband/openib-drivers/openib-drivers-1.2.5.1.ebuild
+++ /dev/null
@@ -1,220 +0,0 @@
-# Copyright 1999-2008 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: $
-
-inherit linux-mod rpm
-
-DESCRIPTION="OpenIB kernel modules"
-HOMEPAGE="http://www.openfabrics.org/"
-SHORT_PV=${PV%\.[^.]}
-SRC_URI="http://www.openfabrics.org/builds/ofed-${SHORT_PV}/release/OFED-${PV}.tgz"
-MY_P="OFED-${PV}"
-S="${WORKDIR}/ofa_kernel-${PV}"
-
-LICENSE="|| ( GPL-2 BSD-2 )"
-SLOT="0"
-
-KEYWORDS="~x86 ~amd64"
-IUSE="cxgb3 debug ehca hpage-patch ipath iser madeye memtrack rds srp vnic"
-
-RDEPEND=""
-DEPEND="${RDEPEND}
-	virtual/linux-sources
-	!sys-infiniband/openib-files"
-
-pkg_setup() {
-
-	CONFIG_CHECK="!INFINIBAND PCI"
-	ERROR_INFINIBAND="Infiniband is already compiled into the kernel."
-	ERROR_PCI="PCI must be enabled in the kernel."
-
-	linux-mod_pkg_setup
-}
-
-src_unpack() {
-	unpack ${A} || die "unpack failed"
-	rpm_unpack ${MY_P}/SRPMS/ofa_kernel-${PV}-0.src.rpm
-	tar xzf ofa_kernel-${PV}.tgz
-}
-
-make_target() {
-	local myARCH="${ARCH}" myABI="${ABI}"
-	ARCH="$(tc-arch-kernel)"
-	ABI="${KERNEL_ABI}"
-
-	emake HOSTCC=$(tc-getBUILD_CC) CC=$(get-KERNEL_CC) $@ \
-		|| die "Unable to run emake $@"
-
-	ARCH="${myARCH}"
-	ABI="${myABI}"
-}
-
-src_compile() {
-	convert_to_m Makefile
-
-	export CONFIG_INFINIBAND="m"
-	export CONFIG_INFINIBAND_IPOIB="m"
-	export CONFIG_INFINIBAND_SDP="m"
-	export CONFIG_INFINIBAND_SRP="m"
-
-	export CONFIG_INFINIBAND_USER_MAD="m"
-	export CONFIG_INFINIBAND_USER_ACCESS="m"
-	export CONFIG_INFINIBAND_ADDR_TRANS="y"
-	export CONFIG_INFINIBAND_MTHCA="m"
-	export CONFIG_INFINIBAND_IPATH="m"
-
-	CONF_PARAMS="--prefix=${ROOT}usr --kernel-version=${KV_FULL}
-				 --with-core-mod
-				 --with-ipoib-mod
-				 --with-ipoib-cm
-				 --with-sdp-mod
-				 --with-user_mad-mod
-				 --with-user_access-mod
-				 --with-addr_trans-mod
-				 --with-mthca-mod"
-	CONF_PARAMS="$CONF_PARAMS
-			     $(use_with srp)-mod
-			     $(use_with ipath)_inf-mod
-			     $(use_with iser)-mod
-			     $(use_with ehca)-mod
-			     $(use_with rds)-mod
-			     $(use_with madeye)-mod
-			     $(use_with vnic)-mod
-			     $(use_with cxgb3)-mod"
-	if use debug; then
-		CONF_PARAMS="$CONF_PARAMS
-					 --with-mthca_debug-mod
-					 --with-ipoib_debug-mod
-					 --with-sdp_debug-mod
-					 $(use_with srp)_debug-mod
-					 $(use_with rds)_debug-mod
-					 $(use_with vnic)_debug-mod
-					 $(use_with cxgb3)_debug-mod"
-	else
-		CONF_PARAMS="$CONF_PARAMS
-					 --without-mthca_debug-mod
-					 --without-ipoib_debug-mod
-					 --without-sdp_debug-mod"
-	fi
-	ebegin "Configuring"
-	local myARCH="${ARCH}" myABI="${ABI}"
-	ARCH="$(tc-arch-kernel)"
-	ABI="${KERNEL_ABI}"
-	./configure ${CONF_PARAMS} ${EXTRA_ECONF} \
-		|| die "configure failed with options: ${CONF_PARAMS}"
-	ARCH="${myARCH}"
-	ABI="${myABI}"
-	eend
-
-	#sed -i '/DEPMOD.*=.*depmod/s/=.*/= :/' ./Makefile
-	#grep DEPMOD Makefile
-
-	make_target
-}
-
-src_install() {
-
-	make_target DESTDIR="${D}" install
-
-	insinto /usr/include/rdma
-	doins "${S}/include/rdma/*.h"
-	insinto /usr/include/scsi
-	doins "${S}/include/scsi/*.h"
-
-	insinto /etc/udev/rules.d
-	newins "${S}/ofed_scripts/90-ib.rules" 40-ib.rules
-	insinto /etc/modules.d
-	newins "${FILESDIR}/openib.modprobe" openib
-	insinto /etc/infiniband
-
-	doinitd "${FILESDIR}/openib"
-
-	# build openib.conf based on ofed_scripts/ofa_kernel.spec
-	build_ipoib=1
-	build_sdp=1
-	cp "${S}/ofed_scripts/openib.conf" "${T}"
-	IB_CONF_DIR=${T}
-	echo >> ${IB_CONF_DIR}/openib.conf
-	echo "# Load UCM module" >> ${IB_CONF_DIR}/openib.conf
-	echo "UCM_LOAD=no" >> ${IB_CONF_DIR}/openib.conf
-	echo >> ${IB_CONF_DIR}/openib.conf
-	echo "# Load RDMA_CM module" >> ${IB_CONF_DIR}/openib.conf
-	echo "RDMA_CM_LOAD=yes" >> ${IB_CONF_DIR}/openib.conf
-	echo >> ${IB_CONF_DIR}/openib.conf
-	echo "# Load RDMA_UCM module" >> ${IB_CONF_DIR}/openib.conf
-	echo "RDMA_UCM_LOAD=yes" >> ${IB_CONF_DIR}/openib.conf
-	echo >> ${IB_CONF_DIR}/openib.conf
-	echo "# Increase ib_mad thread priority" >> ${IB_CONF_DIR}/openib.conf
-	echo "RENICE_IB_MAD=no" >> ${IB_CONF_DIR}/openib.conf
-
-	echo >> ${IB_CONF_DIR}/openib.conf
-	echo "# Load MTHCA" >> ${IB_CONF_DIR}/openib.conf
-	echo "MTHCA_LOAD=yes" >> ${IB_CONF_DIR}/openib.conf
-	if use ipath; then
-		echo >> ${IB_CONF_DIR}/openib.conf
-		echo "# Load IPATH" >> ${IB_CONF_DIR}/openib.conf
-		echo "IPATH_LOAD=yes" >> ${IB_CONF_DIR}/openib.conf
-	fi
-	if use ehca; then
-		echo >> ${IB_CONF_DIR}/openib.conf
-		echo "# Load eHCA" >> ${IB_CONF_DIR}/openib.conf
-		echo "EHCA_LOAD=yes" >> ${IB_CONF_DIR}/openib.conf
-	fi
-	if (( build_ipoib )); then
-		echo >> ${IB_CONF_DIR}/openib.conf
-		echo "# Load IPoIB" >> ${IB_CONF_DIR}/openib.conf
-		echo "#IPOIB_LOAD=yes" >> ${IB_CONF_DIR}/openib.conf
-		echo >> ${IB_CONF_DIR}/openib.conf
-		echo "# Enable IPoIB Connected Mode" >> ${IB_CONF_DIR}/openib.conf
-		echo "#SET_IPOIB_CM=yes" >> ${IB_CONF_DIR}/openib.conf
-		# from ofa_user.spec:
-		echo >> ${IB_CONF_DIR}/openib.conf
-		echo "# Enable IPoIB High Availability daemon" >> ${IB_CONF_DIR}/openib.conf
-		echo "#IPOIBHA_ENABLE=no" >> ${IB_CONF_DIR}/openib.conf
-		echo "# PRIMARY_IPOIB_DEV=ib0" >> ${IB_CONF_DIR}/openib.conf
-		echo "# SECONDARY_IPOIB_DEV=ib1" >> ${IB_CONF_DIR}/openib.conf
-	fi
-	if (( build_sdp )); then
-		 echo >> ${IB_CONF_DIR}/openib.conf
-		 echo "# Load SDP module" >> ${IB_CONF_DIR}/openib.conf
-		 echo "#SDP_LOAD=yes" >> ${IB_CONF_DIR}/openib.conf
-	fi
-	if use srp; then
-		echo >> ${IB_CONF_DIR}/openib.conf
-		echo "# Load SRP module" >> ${IB_CONF_DIR}/openib.conf
-		echo "#SRP_LOAD=no" >> ${IB_CONF_DIR}/openib.conf
-		# from ofa_user.spec:
-		echo >> ${IB_CONF_DIR}/openib.conf
-		echo "# Enable SRP High Availability daemon" >> ${IB_CONF_DIR}/openib.conf
-		echo "#SRPHA_ENABLE=no" >> ${IB_CONF_DIR}/openib.conf
-
-	fi
-	if use iser; then
-		echo >> ${IB_CONF_DIR}/openib.conf
-		echo "# Load ISER module" >> ${IB_CONF_DIR}/openib.conf
-		echo "#ISER_LOAD=no" >> ${IB_CONF_DIR}/openib.conf
-	fi
-	if use rds; then
-		echo >> ${IB_CONF_DIR}/openib.conf
-		echo "# Load RDS module" >> ${IB_CONF_DIR}/openib.conf
-		echo "#RDS_LOAD=no" >> ${IB_CONF_DIR}/openib.conf
-	fi
-	if use vnic; then
-		echo >> ${IB_CONF_DIR}/openib.conf
-		echo "# Load VNIC module" >> ${IB_CONF_DIR}/openib.conf
-		echo "#VNIC_LOAD=yes" >> ${IB_CONF_DIR}/openib.conf
-	fi
-
-	doins "${T}/openib.conf"
-}
-
-pkg_postinst() {
-
-	linux-mod_pkg_postinst
-
-	einfo "Configuration file installed in /etc/infiniband/openib.conf"
-	einfo "To automatically initialize infiniband on boot, add openib to your"
-	einfo "start-up scripts, like so:"
-	einfo "\`rc-update add openib default\`"
-
-}