summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorPeter Alfredsen <crabbedhaloablution@icloud.com>2020-12-03 15:06:49 +0100
committerSam James <sam@gentoo.org>2020-12-15 03:04:58 +0000
commit4c612defaf1e631c8a95bf0a48a3be41ee588b76 (patch)
tree9002b227ff3c342476054066339f11980b497668 /dev-embedded/rpi-eeprom
parentdev-python/google-api-core-1.24.0: Version bump (diff)
downloadgentoo-4c612defaf1e631c8a95bf0a48a3be41ee588b76.tar.gz
gentoo-4c612defaf1e631c8a95bf0a48a3be41ee588b76.tar.bz2
gentoo-4c612defaf1e631c8a95bf0a48a3be41ee588b76.zip
dev-embedded/rpi-eeprom: Bump to 10.3_p1
New firmware for the BETA channel. My rpi4 is not burning, so I guess it's ok? Changelog: 2020-11-24 BCM2711 xHC boot support - BETA * Add support for booting from the BCM2711 XHCI controller which is the USB-C socket on Pi 4B / Pi 400 and the type A sockets on Compute Module 4 IO board. The controller only supports USB 2.0 and the primary usage is for USB-MSD support on CM 4 boards without requiring a PCIe XHCI controller. To use this add '5' to the BOOT_ORDER in the EEPROM config for BCM_USB_MSD boot. This requires the latest rpi-update firmware. If start.elf is loaded via the BCM2711 XHCI (BOOT_ORDER 5) then the config.txt otg_mode setting will be set to 1 so that the OS can continue booting using the BCM2711 XHCI. This means that the device/gadget mode is not available when booted in this mode and there is no support for switching back to the DWC2 controller from the BCM2711 XHCI controller. * Update halt behavior on Pi 400 to re-enable 'power on' button if the OS did a reset rather than using the standard mailbox shutdown commands. This overrides WAKE_ON_GPIO / POWER_OFF_ON_HALT settings on Pi 400 because it has a dedicated power button. If a button on GPIO3 really is requried then it can be re-enabled by setting WAKE_ON_GPIO=2 but that will consume more power. * Fix short blink before one-shot error pattern - #251 * Validate SDRAM in recovery mode. * XHCI protocol layer fixes for non-VLI controllers. * Updated 'tryboot' for new version which also supports Pi3 and earlier. Closes: https://bugs.gentoo.org/758263 Package-Manager: Portage-3.0.11, Repoman-3.0.2 Signed-off-by: Peter Alfredsen <crabbedhaloablution@icloud.com> Closes: https://github.com/gentoo/gentoo/pull/18488 Signed-off-by: Sam James <sam@gentoo.org>
Diffstat (limited to 'dev-embedded/rpi-eeprom')
-rw-r--r--dev-embedded/rpi-eeprom/Manifest2
-rw-r--r--dev-embedded/rpi-eeprom/rpi-eeprom-10.3_p1.ebuild93
2 files changed, 95 insertions, 0 deletions
diff --git a/dev-embedded/rpi-eeprom/Manifest b/dev-embedded/rpi-eeprom/Manifest
index e29caef56709..781173b77940 100644
--- a/dev-embedded/rpi-eeprom/Manifest
+++ b/dev-embedded/rpi-eeprom/Manifest
@@ -1,2 +1,4 @@
DIST rpi-eeprom_10.2-1.debian.tar.xz 7360 BLAKE2B e7959c4de4f3675632f0897b6f8abc811c80daa102ad3fcca672a0e0f9ce4b4da80fd616de7aa8896f0f5fe889a10a52d32eba34627858a173186292175f3bf9 SHA512 cf401c5f761fc8c5b463630d192c8af9da2ae2e55e178857d9c09198437f162f96af23836d20adda6054243c6b613b7cc5c90a70975b96bad574dc3b328caa22
DIST rpi-eeprom_10.2.orig.tar.gz 7415652 BLAKE2B b1f56263c0037b2ba3bac2aecd9b5736736cf599bc68a743c065c853a20f56f18984816fdfb402bb499c3aa911dbe72376cec4647d87406cce2f4328b04cc2b1 SHA512 ea76a157ed57984fb0667e9171e3fbf7dba180e014faa9352b0c1904531dca9528b0e3204645a4af2b550670a52354b6b1be6af27e190d4523d8044f3349aa73
+DIST rpi-eeprom_10.3-1.debian.tar.xz 10188 BLAKE2B 284a5465f2b5bc28c95135b8869218e83cbea9d0667b165de954f5c73549dfc190ddc838d956eec4c569c579e95ffc157054c6ed4bbd45e8ae88f786675cb164 SHA512 ead6b6c51d03493479c242e757edfc33bfdba4627f7501d90d0a181e8adc68f1503e0dac900b9b253a7286523f84d0e9afd8460d72f30b3ee8ee75b2f76811ab
+DIST rpi-eeprom_10.3.orig.tar.gz 7635402 BLAKE2B 3153eda08eada4c9e4f05d7a68ac4661413591314c4980e16ee876d49e756e2e13a101765b579adbe51e0e3b88cdfe419b71a58da858250781e0f292220dc397 SHA512 ea5a6ae47be5052b4793161d891a1e3a72dda951c95f15797d7baf68d475fcec1250638e4c43a32578ceef10563ebce052e746bc8fc60f8cf8d90780d5a7e8a7
diff --git a/dev-embedded/rpi-eeprom/rpi-eeprom-10.3_p1.ebuild b/dev-embedded/rpi-eeprom/rpi-eeprom-10.3_p1.ebuild
new file mode 100644
index 000000000000..c34a558630a7
--- /dev/null
+++ b/dev-embedded/rpi-eeprom/rpi-eeprom-10.3_p1.ebuild
@@ -0,0 +1,93 @@
+# Copyright 1999-2020 Gentoo Authors
+# Distributed under the terms of the GNU General Public License v2
+
+EAPI=7
+
+PYTHON_COMPAT=( python3_{6,7,8,9} )
+
+inherit python-r1 systemd
+
+DESCRIPTION="Updater for Raspberry Pi 4 bootloader and the VL805 USB controller"
+HOMEPAGE="https://github.com/raspberrypi/rpi-eeprom/"
+MY_P="${PN}-$(ver_cut 1-2)"
+MY_BASE_URL="https://archive.raspberrypi.org/debian/pool/main/r/${PN}/${PN}_$(ver_cut 1-2)"
+SRC_URI="${MY_BASE_URL}-$(ver_cut 4).debian.tar.xz
+ ${MY_BASE_URL}.orig.tar.gz"
+S="${WORKDIR}"
+
+SLOT="0"
+LICENSE="BSD rpi-eeprom"
+KEYWORDS="~arm ~arm64"
+REQUIRED_USE="${PYTHON_REQUIRED_USE}"
+
+BDEPEND="sys-apps/help2man"
+DEPEND="${PYTHON_DEPS}"
+RDEPEND="${PYTHON_DEPS}
+ sys-apps/flashrom
+ || (
+ >=media-libs/raspberrypi-userland-0_pre20201022
+ >=media-libs/raspberrypi-userland-bin-1.20201022
+ )"
+
+src_prepare() {
+ default
+ sed -i \
+ -e 's:/etc/default/rpi-eeprom-update:/etc/conf.d/rpi-eeprom-update:' \
+ "${MY_P}/rpi-eeprom-update" || die "Failed sed on rpi-eeprom-update"
+ sed -i \
+ -e 's:/usr/bin/rpi-eeprom-update:/usr/sbin/rpi-eeprom-update:' \
+ "debian/rpi-eeprom.rpi-eeprom-update.service" || die "Failed sed on rpi-eeprom.rpi-eeprom-update.service"
+}
+
+src_install() {
+ pushd "${MY_P}" 1>/dev/null || die "Cannot change into directory ${MY_P}"
+
+ python_scriptinto /usr/sbin
+ python_foreach_impl python_newscript rpi-eeprom-config rpi-eeprom-config
+
+ dosbin rpi-eeprom-update
+ keepdir /var/lib/raspberrypi/bootloader/backup
+
+ for dir in critical stable beta; do
+ insinto /lib/firmware/raspberrypi/bootloader
+ doins -r firmware/${dir}
+ done
+
+ dodoc firmware/release-notes.md
+
+ help2man -N \
+ --version-string="${PV}" --help-option="-h" \
+ --name="Bootloader EEPROM configuration tool for the Raspberry Pi 4B" \
+ --output=rpi-eeprom-config.1 ./rpi-eeprom-config || die "Failed to create manpage for rpi-eeprom-config"
+
+ help2man -N \
+ --version-string="${PV}" --help-option="-h" \
+ --name="Checks whether the Raspberry Pi bootloader EEPROM is \
+ up-to-date and updates the EEPROM" \
+ --output=rpi-eeprom-update.1 ./rpi-eeprom-update || die "Failed to create manpage for rpi-eeprom-update"
+
+ doman rpi-eeprom-update.1 rpi-eeprom-config.1
+
+ newconfd rpi-eeprom-update-default rpi-eeprom-update
+
+ popd 1>/dev/null || die
+
+ pushd debian 1>/dev/null || die "Cannot change into directory debian"
+
+ systemd_newunit rpi-eeprom.rpi-eeprom-update.service rpi-eeprom-update.service
+ newdoc changelog changelog.Debian
+
+ popd 1>/dev/null || die
+
+ newinitd "${FILESDIR}/init.d_rpi-eeprom-update-1" "rpi-eeprom-update"
+}
+
+pkg_postinst() {
+ elog 'To have rpi-eeprom-update run at each startup, enable and start either'
+ elog '/etc/init.d/rpi-eeprom-update (for openrc users)'
+ elog 'or'
+ elog 'rpi-eeprom-update.service (for systemd users)'
+ elog '/etc/conf.d/rpi-eeprom-update contains the configuration.'
+ elog 'FIRMWARE_RELEASE_STATUS="critical|stable|beta" determines'
+ elog 'which release track you get. "critical" is recommended and the default.'
+}