net-fs/samba: Remove <3.6, bonsaikitten approved

13 files changed, 0 insertions, 618 deletions

diff --git a/net-fs/samba/files/3.5/lmhosts b/net-fs/samba/files/3.5/lmhosts
deleted file mode 100644
index fe7b466eb16a..000000000000
--- a/net-fs/samba/files/3.5/lmhosts
+++ /dev/null
@@ -1,2 +0,0 @@
-# $Id$
-127.0.0.1 localhost
diff --git a/net-fs/samba/files/3.5/nsswitch.conf-winbind b/net-fs/samba/files/3.5/nsswitch.conf-winbind
deleted file mode 100644
index 32d9b98b8505..000000000000
--- a/net-fs/samba/files/3.5/nsswitch.conf-winbind
+++ /dev/null
@@ -1,17 +0,0 @@
-# $Id$
-passwd:      files winbind
-group:       files winbind
-
-hosts:       files dns
-networks:    files dns
-
-services:    db files
-protocols:   db files
-rpc:         db files
-ethers:      db files
-netmasks:    files
-netgroup:    files
-bootparams:  files
-
-automount:   files
-aliases:     files
diff --git a/net-fs/samba/files/3.5/nsswitch.conf-wins b/net-fs/samba/files/3.5/nsswitch.conf-wins
deleted file mode 100644
index 44c01aed9557..000000000000
--- a/net-fs/samba/files/3.5/nsswitch.conf-wins
+++ /dev/null
@@ -1,17 +0,0 @@
-# $Id$
-passwd:      files
-group:       files
-
-hosts:       files dns wins
-networks:    files dns
-
-services:    db files
-protocols:   db files
-rpc:         db files
-ethers:      db files
-netmasks:    files
-netgroup:    files
-bootparams:  files
-
-automount:   files
-aliases:     files
diff --git a/net-fs/samba/files/3.5/samba-3.5.6-kerberos-dummy.patch b/net-fs/samba/files/3.5/samba-3.5.6-kerberos-dummy.patch
deleted file mode 100644
index ef76afff7ef6..000000000000
--- a/net-fs/samba/files/3.5/samba-3.5.6-kerberos-dummy.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-diff -NrU5 samba-3.5.6.original/source3/include/krb5_protos.h samba-3.5.6/source3/include/krb5_protos.h
---- samba-3.5.6.original/source3/include/krb5_protos.h	2010-10-07 10:41:16.000000000 -0600
-+++ samba-3.5.6/source3/include/krb5_protos.h	2010-12-23 11:01:09.000000000 -0600
-@@ -86,15 +86,10 @@
- 					    const char *name,
- 					    krb5_principal *principal);
- bool smb_krb5_principal_compare_any_realm(krb5_context context,
- 					  krb5_const_principal princ1,
- 					  krb5_const_principal princ2);
--int cli_krb5_get_ticket(const char *principal, time_t time_offset,
--			DATA_BLOB *ticket, DATA_BLOB *session_key_krb5,
--			uint32 extra_ap_opts, const char *ccname,
--			time_t *tgs_expire,
--			const char *impersonate_princ_s);
- krb5_error_code smb_krb5_renew_ticket(const char *ccache_string, const char *client_string, const char *service_string, time_t *expire_time);
- krb5_error_code kpasswd_err_to_krb5_err(krb5_error_code res_code);
- krb5_error_code smb_krb5_gen_netbios_krb5_address(smb_krb5_addresses **kerb_addr);
- krb5_error_code smb_krb5_free_addresses(krb5_context context, smb_krb5_addresses *addr);
- NTSTATUS krb5_to_nt_status(krb5_error_code kerberos_error);
-@@ -144,5 +139,10 @@
- 				   krb5_creds **creds_p);
- char *smb_krb5_principal_get_realm(krb5_context context,
- 				   krb5_principal principal);
- #endif /* HAVE_KRB5 */
- 
-+int cli_krb5_get_ticket(const char *principal, time_t time_offset,
-+                        DATA_BLOB *ticket, DATA_BLOB *session_key_krb5,
-+                        uint32 extra_ap_opts, const char *ccname,
-+                        time_t *tgs_expire,
-+                        const char *impersonate_princ_s);
diff --git a/net-fs/samba/files/3.5/samba-3.5.8-uclib-build.patch b/net-fs/samba/files/3.5/samba-3.5.8-uclib-build.patch
deleted file mode 100644
index 905b06a5db16..000000000000
--- a/net-fs/samba/files/3.5/samba-3.5.8-uclib-build.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From a5bfd634ecd0e81eb92b065da311ee4cf6f08757 Mon Sep 17 00:00:00 2001
-From: Jeff Layton <jlayton@samba.org>
-Date: Mon, 5 Jul 2010 08:39:45 -0400
-Subject: [PATCH] mount.cifs: switch to using _PATH_MNTTAB and paths.h
-
-The code currently uses fstab.h and _PATH_FSTAB, but uClibc apparently
-doesn't have that header. It does have paths.h and _PATH_MNTTAB however
-and so does glibc, so use that instead.
-
-Reported-by: Armin Kuster <linux@kama-aina.net>
-Signed-off-by: Jeff Layton <jlayton@samba.org>
----
-diff -NrU5 samba-3.5.8.original/client/mount.cifs.c samba-3.5.8/client/mount.cifs.c
---- samba-3.5.8.original/client/mount.cifs.c	2011-03-06 12:48:05.000000000 -0600
-+++ samba-3.5.8/client/mount.cifs.c	2011-05-04 08:51:42.000000000 -0600
-@@ -37,11 +37,11 @@
- #include <netdb.h>
- #include <string.h>
- #include <mntent.h>
- #include <fcntl.h>
- #include <limits.h>
--#include <fstab.h>
-+#include <paths.h>
- #include "mount.h"
- 
- #define MOUNT_CIFS_VERSION_MAJOR "1"
- #define MOUNT_CIFS_VERSION_MINOR "14"
- 
-@@ -261,14 +261,14 @@
- {
- 	FILE *fstab;
- 	struct mntent *mnt;
- 
- 	/* make sure this mount is listed in /etc/fstab */
--	fstab = setmntent(_PATH_FSTAB, "r");
-+	fstab = setmntent(_PATH_MNTTAB, "r");
- 	if (!fstab) {
- 		fprintf(stderr, "Couldn't open %s for reading!\n",
--				_PATH_FSTAB);
-+				_PATH_MNTTAB);
- 		return EX_FILEIO;
- 	}
- 
- 	while((mnt = getmntent(fstab))) {
- 		if (!strcmp(mountpoint, mnt->mnt_dir))
-@@ -277,11 +277,11 @@
- 	endmntent(fstab);
- 
- 	if (mnt == NULL || strcmp(mnt->mnt_fsname, devname)) {
- 		fprintf(stderr, "%s: permission denied: no match for "
- 				"%s found in %s\n", progname, mountpoint,
--				_PATH_FSTAB);
-+				_PATH_MNTTAB);
- 		return EX_USAGE;
- 	}
- 
- 	/*
- 	 * 'mount' munges the options from fstab before passing them
diff --git a/net-fs/samba/files/3.5/samba.confd b/net-fs/samba/files/3.5/samba.confd
deleted file mode 100644
index 1b329dae6b18..000000000000
--- a/net-fs/samba/files/3.5/samba.confd
+++ /dev/null
@@ -1,28 +0,0 @@
-#add "winbind" to the daemon_list if you also want winbind to start
-daemon_list="smbd nmbd"
-
-#----------------------------------------------------------------------------
-# Daemons calls: <daemon_name>_<command_option>
-#----------------------------------------------------------------------------
-my_service_name="samba"
-my_service_PRE="unset TMP TMPDIR"
-my_service_POST=""
-
-#----------------------------------------------------------------------------
-# Daemons calls: <daemon_name>_<command_option>
-#----------------------------------------------------------------------------
-smbd_start_options="-D"
-smbd_start="start-stop-daemon --start --exec /usr/sbin/smbd -- ${smbd_start_options}"
-smbd_stop="start-stop-daemon --stop --exec /usr/sbin/smbd"
-smbd_reload="killall -HUP smbd"
-
-nmbd_start_options="-D"
-nmbd_start="start-stop-daemon --start --exec /usr/sbin/nmbd -- ${nmbd_start_options}"
-nmbd_stop="start-stop-daemon --stop --exec /usr/sbin/nmbd"
-nmbd_reload="killall -HUP nmbd"
-
-winbind_start_options=""
-winbind_start="start-stop-daemon --start --exec /usr/sbin/winbindd -- ${winbind_start_options}"
-winbind_stop="start-stop-daemon --stop --exec /usr/sbin/winbindd"
-winbind_reload="killall -HUP winbindd"
-
diff --git a/net-fs/samba/files/3.5/samba.initd b/net-fs/samba/files/3.5/samba.initd
deleted file mode 100644
index 18804daa3421..000000000000
--- a/net-fs/samba/files/3.5/samba.initd
+++ /dev/null
@@ -1,59 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2011 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License, v2 or later
-# $Id$
-
-extra_started_commands="reload"
-
-depend() {
-	after slapd
-	need net
-	use cupsd
-}
-
-DAEMONNAME="${SVCNAME##samba.}"
-[ "${DAEMONNAME}" != "samba" ] && daemon_list=${DAEMONNAME}
-
-signal_do() {
-	local signal="$1"
-	[ -z "${signal}" ] && return 0
-
-	local result=0 last_result=0 daemon= cmd_exec=
-	for daemon in ${daemon_list} ; do
-		eval cmd_exec=\$${daemon}_${signal}
-		if [ -n "${cmd_exec}" ]; then
-			ebegin "${my_service_name} -> ${signal}: ${daemon}"
-			#echo ${cmd} '->' ${!cmd}
-			${cmd_exec} > /dev/null
-			last_result=$?
-			eend ${last_result}
-		fi
-		result=$(( ${result} + ${last_result} ))
-	done
-	return ${result}
-}
-
-mkdir_sambadirs() {
-	[ -d /var/run/samba ] || mkdir -p /var/run/samba
-}
-
-start() {
-	${my_service_PRE}
-	mkdir_sambadirs
-	signal_do start && return 0
-	
-	eerror "Error: starting services (see system logs)"
-	signal_do stop
-	return 1
-}
-stop() {
-	${my_service_PRE}
-	if signal_do stop ; then
-	    ${my_service_POST}
-	    return 0
-	fi
-}
-reload() {
-	${my_service_PRE}
-	signal_do reload
-}
diff --git a/net-fs/samba/files/3.5/samba.pam b/net-fs/samba/files/3.5/samba.pam
deleted file mode 100644
index 91beadd478a4..000000000000
--- a/net-fs/samba/files/3.5/samba.pam
+++ /dev/null
@@ -1,8 +0,0 @@
-#%PAM-1.0
-# * pam_smbpass.so authenticates against the smbpasswd file
-# * changed Redhat's 'pam_stack' with 'include' for *BSD compatibility
-#    (Diego "Flameeyes" Petteno'): enable with pam>=0.78 only
-auth       required     pam_smbpass.so nodelay
-account    include      system-auth
-session    include      system-auth
-password   required     pam_smbpass.so nodelay smbconf=/etc/samba/smb.conf
diff --git a/net-fs/samba/files/3.5/smb.conf.default b/net-fs/samba/files/3.5/smb.conf.default
deleted file mode 100644
index 4c9a4a6d529f..000000000000
--- a/net-fs/samba/files/3.5/smb.conf.default
+++ /dev/null
@@ -1,271 +0,0 @@
-# This is the main Samba configuration file. You should read the
-# smb.conf(5) manual page in order to understand the options listed
-# here. Samba has a huge number of configurable options (perhaps too
-# many!) most of which are not shown in this example
-#
-# For a step to step guide on installing, configuring and using samba, 
-# read the Samba-HOWTO-Collection. This may be obtained from:
-#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
-#
-# Many working examples of smb.conf files can be found in the 
-# Samba-Guide which is generated daily and can be downloaded from: 
-#  http://www.samba.org/samba/docs/Samba-Guide.pdf
-#
-# Any line which starts with a ; (semi-colon) or a # (hash) 
-# is a comment and is ignored. In this example we will use a #
-# for commentry and a ; for parts of the config file that you
-# may wish to enable
-#
-# NOTE: Whenever you modify this file you should run the command "testparm"
-# to check that you have not made any basic syntactic errors. 
-#
-#======================= Global Settings =====================================
-[global]
-
-# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
-   workgroup = MYGROUP
-
-# server string is the equivalent of the NT Description field
-   server string = Samba Server
-
-# Security mode. Defines in which mode Samba will operate. Possible 
-# values are share, user, server, domain and ads. Most people will want 
-# user level security. See the Samba-HOWTO-Collection for details.
-   security = user
-
-# This option is important for security. It allows you to restrict
-# connections to machines which are on your local network. The
-# following example restricts access to two C class networks and
-# the "loopback" interface. For more examples of the syntax see
-# the smb.conf man page
-;   hosts allow = 192.168.1. 192.168.2. 127.
-
-# If you want to automatically load your printer list rather
-# than setting them up individually then you'll need this
-   load printers = yes
-
-# you may wish to override the location of the printcap file
-;   printcap name = /etc/printcap
-
-# on SystemV system setting printcap name to lpstat should allow
-# you to automatically obtain a printer list from the SystemV spool
-# system
-;   printcap name = lpstat
-
-# It should not be necessary to specify the print system type unless
-# it is non-standard. Currently supported print systems include:
-# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
-;   printing = cups
-
-# Uncomment this if you want a guest account, you must add this to /etc/passwd
-# otherwise the user "nobody" is used
-;  guest account = pcguest
-
-# this tells Samba to use a separate log file for each machine
-# that connects
-   log file = /var/log/samba/log.%m
-
-# Put a capping on the size of the log files (in Kb).
-   max log size = 50
-
-# Use password server option only with security = server
-# The argument list may include:
-#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
-# or to auto-locate the domain controller/s
-#   password server = *
-;   password server = <NT-Server-Name>
-
-# Use the realm option only with security = ads
-# Specifies the Active Directory realm the host is part of
-;   realm = MY_REALM
-
-# Backend to store user information in. New installations should 
-# use either tdbsam or ldapsam. smbpasswd is available for backwards 
-# compatibility. tdbsam requires no further configuration.
-;   passdb backend = tdbsam
-
-# Using the following line enables you to customise your configuration
-# on a per machine basis. The %m gets replaced with the netbios name
-# of the machine that is connecting.
-# Note: Consider carefully the location in the configuration file of
-#       this line.  The included file is read at that point.
-;   include = /etc/samba/smb.conf.%m
-
-# Configure Samba to use multiple interfaces
-# If you have multiple network interfaces then you must list them
-# here. See the man page for details.
-;   interfaces = 192.168.12.2/24 192.168.13.2/24 
-
-# Browser Control Options:
-# set local master to no if you don't want Samba to become a master
-# browser on your network. Otherwise the normal election rules apply
-;   local master = no
-
-# OS Level determines the precedence of this server in master browser
-# elections. The default value should be reasonable
-;   os level = 33
-
-# Domain Master specifies Samba to be the Domain Master Browser. This
-# allows Samba to collate browse lists between subnets. Don't use this
-# if you already have a Windows NT domain controller doing this job
-;   domain master = yes 
-
-# Preferred Master causes Samba to force a local browser election on startup
-# and gives it a slightly higher chance of winning the election
-;   preferred master = yes
-
-# Enable this if you want Samba to be a domain logon server for 
-# Windows95 workstations. 
-;   domain logons = yes
-
-# if you enable domain logons then you may want a per-machine or
-# per user logon script
-# run a specific logon batch file per workstation (machine)
-;   logon script = %m.bat
-# run a specific logon batch file per username
-;   logon script = %U.bat
-
-# Where to store roving profiles (only for Win95 and WinNT)
-#        %L substitutes for this servers netbios name, %U is username
-#        You must uncomment the [Profiles] share below
-;   logon path = \\%L\Profiles\%U
-
-# Windows Internet Name Serving Support Section:
-# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
-;   wins support = yes
-
-# WINS Server - Tells the NMBD components of Samba to be a WINS Client
-#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
-;   wins server = w.x.y.z
-
-# WINS Proxy - Tells Samba to answer name resolution queries on
-# behalf of a non WINS capable client, for this to work there must be
-# at least one	WINS Server on the network. The default is NO.
-;   wins proxy = yes
-
-# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
-# via DNS nslookups. The default is NO.
-   dns proxy = no 
-
-# These scripts are used on a domain controller or stand-alone 
-# machine to add or delete corresponding unix accounts
-;  add user script = /usr/sbin/useradd %u
-;  add group script = /usr/sbin/groupadd %g
-;  add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
-;  delete user script = /usr/sbin/userdel %u
-;  delete user from group script = /usr/sbin/deluser %u %g
-;  delete group script = /usr/sbin/groupdel %g
-
-
-#============================ Share Definitions ==============================
-[homes]
-   comment = Home Directories
-   browseable = no
-   writable = yes
-
-# Un-comment the following and create the netlogon directory for Domain Logons
-; [netlogon]
-;   comment = Network Logon Service
-;   path = /var/lib/samba/netlogon
-;   guest ok = yes
-;   writable = no
-;   share modes = no
-
-
-# Un-comment the following to provide a specific roving profile share
-# the default is to use the user's home directory
-;[Profiles]
-;    path = /var/lib/samba/profiles
-;    browseable = no
-;    guest ok = yes
-
-
-# NOTE: If you have a BSD-style print system there is no need to 
-# specifically define each individual printer
-[printers]
-   comment = All Printers
-   path = /var/spool/samba
-   browseable = no
-# Set public = yes to allow user 'guest account' to print
-   guest ok = no
-   writable = no
-   printable = yes
-
-# This one is useful for people to share files
-;[tmp]
-;   comment = Temporary file space
-;   path = /tmp
-;   read only = no
-;   public = yes
-
-# A publicly accessible directory, but read only, except for people in
-# the "staff" group
-;[public]
-;   comment = Public Stuff
-;   path = /home/samba
-;   public = yes
-;   writable = yes
-;   printable = no
-;   write list = @staff
-
-# Other examples. 
-#
-# A private printer, usable only by fred. Spool data will be placed in fred's
-# home directory. Note that fred must have write access to the spool directory,
-# wherever it is.
-;[fredsprn]
-;   comment = Fred's Printer
-;   valid users = fred
-;   path = /homes/fred
-;   printer = freds_printer
-;   public = no
-;   writable = no
-;   printable = yes
-
-# A private directory, usable only by fred. Note that fred requires write
-# access to the directory.
-;[fredsdir]
-;   comment = Fred's Service
-;   path = /usr/somewhere/private
-;   valid users = fred
-;   public = no
-;   writable = yes
-;   printable = no
-
-# a service which has a different directory for each machine that connects
-# this allows you to tailor configurations to incoming machines. You could
-# also use the %U option to tailor it by user name.
-# The %m gets replaced with the machine name that is connecting.
-;[pchome]
-;  comment = PC Directories
-;  path = /usr/pc/%m
-;  public = no
-;  writable = yes
-
-# A publicly accessible directory, read/write to all users. Note that all files
-# created in the directory by users will be owned by the default user, so
-# any user with access can delete any other user's files. Obviously this
-# directory must be writable by the default user. Another user could of course
-# be specified, in which case all files would be owned by that user instead.
-;[public]
-;   path = /usr/somewhere/else/public
-;   public = yes
-;   only guest = yes
-;   writable = yes
-;   printable = no
-
-# The following two entries demonstrate how to share a directory so that two
-# users can place files there that will be owned by the specific users. In this
-# setup, the directory should be writable by both users and should have the
-# sticky bit set on it to prevent abuse. Obviously this could be extended to
-# as many users as required.
-;[myshare]
-;   comment = Mary's and Fred's stuff
-;   path = /usr/somewhere/shared
-;   valid users = mary fred
-;   public = no
-;   writable = yes
-;   printable = no
-;   create mask = 0765
-
-
diff --git a/net-fs/samba/files/3.5/smb.conf.default.patch b/net-fs/samba/files/3.5/smb.conf.default.patch
deleted file mode 100644
index e9d62db164f4..000000000000
--- a/net-fs/samba/files/3.5/smb.conf.default.patch
+++ /dev/null
@@ -1,86 +0,0 @@
---- samba-3.5.9/examples/smb.conf.default	2011-06-14 05:17:28.000000000 -0600
-+++ /etc/samba/smb.conf.default	2011-06-29 10:12:13.000000000 -0600
-@@ -61,11 +61,11 @@
- # otherwise the user "nobody" is used
- ;  guest account = pcguest
- 
- # this tells Samba to use a separate log file for each machine
- # that connects
--   log file = /usr/local/samba/var/log.%m
-+   log file = /var/log/samba/log.%m
- 
- # Put a capping on the size of the log files (in Kb).
-    max log size = 50
- 
- # Use password server option only with security = server
-@@ -79,19 +79,22 @@
- # Specifies the Active Directory realm the host is part of
- ;   realm = MY_REALM
- 
- # Backend to store user information in. New installations should 
- # use either tdbsam or ldapsam. smbpasswd is available for backwards 
--# compatibility. tdbsam requires no further configuration.
-+# compatibility. tdbsam requires no further configuration. If you're 
-+# migrating from < samba 3.4, you'll have to convert your old user 
-+# passwords to the new backend with the command:
-+# pdbedit -i smbpasswd:/var/lib/samba/private/smbpasswd -e
- ;   passdb backend = tdbsam
- 
- # Using the following line enables you to customise your configuration
- # on a per machine basis. The %m gets replaced with the netbios name
- # of the machine that is connecting.
- # Note: Consider carefully the location in the configuration file of
- #       this line.  The included file is read at that point.
--;   include = /usr/local/samba/lib/smb.conf.%m
-+;   include = /etc/samba/smb.conf.%m
- 
- # Configure Samba to use multiple interfaces
- # If you have multiple network interfaces then you must list them
- # here. See the man page for details.
- ;   interfaces = 192.168.12.2/24 192.168.13.2/24 
-@@ -164,29 +167,29 @@
-    writable = yes
- 
- # Un-comment the following and create the netlogon directory for Domain Logons
- ; [netlogon]
- ;   comment = Network Logon Service
--;   path = /usr/local/samba/lib/netlogon
-+;   path = /var/lib/samba/netlogon
- ;   guest ok = yes
- ;   writable = no
- ;   share modes = no
- 
- 
- # Un-comment the following to provide a specific roving profile share
- # the default is to use the user's home directory
- ;[Profiles]
--;    path = /usr/local/samba/profiles
-+;    path = /var/lib/samba/profiles
- ;    browseable = no
- ;    guest ok = yes
- 
- 
- # NOTE: If you have a BSD-style print system there is no need to 
- # specifically define each individual printer
- [printers]
-    comment = All Printers
--   path = /usr/spool/samba
-+   path = /var/spool/samba
-    browseable = no
- # Set public = yes to allow user 'guest account' to print
-    guest ok = no
-    writable = no
-    printable = yes
-@@ -202,11 +205,11 @@
- # the "staff" group
- ;[public]
- ;   comment = Public Stuff
- ;   path = /home/samba
- ;   public = yes
--;   writable = no
-+;   writable = yes
- ;   printable = no
- ;   write list = @staff
- 
- # Other examples. 
- #
diff --git a/net-fs/samba/files/3.5/smbusers b/net-fs/samba/files/3.5/smbusers
deleted file mode 100644
index 7acb6dc817af..000000000000
--- a/net-fs/samba/files/3.5/smbusers
+++ /dev/null
@@ -1,7 +0,0 @@
-# $Id$
-
-# Syntax:
-#   Unix_name = SMB_name1 SMB_name2 ...
-
-root = Administrator admin
-nobody = guest pcguest smbguest
diff --git a/net-fs/samba/files/3.5/swat.xinetd b/net-fs/samba/files/3.5/swat.xinetd
deleted file mode 100644
index 45e977df11aa..000000000000
--- a/net-fs/samba/files/3.5/swat.xinetd
+++ /dev/null
@@ -1,17 +0,0 @@
-# default: off
-# description: SWAT is the Samba Web Admin Tool. Use swat \
-#	       to configure your Samba server. To use SWAT, \
-#	       connect to port 901 with your favorite web browser.
-# $Id$
-
-service swat
-{
-	port            = 901
-	socket_type     = stream
-	wait            = no
-	only_from       = localhost
-	user            = root
-	server          = /usr/sbin/swat
-	log_on_failure += USERID
-	disable         = yes
-}
diff --git a/net-fs/samba/files/3.5/system-auth-winbind.pam b/net-fs/samba/files/3.5/system-auth-winbind.pam
deleted file mode 100644
index 8d6746b7aeb6..000000000000
--- a/net-fs/samba/files/3.5/system-auth-winbind.pam
+++ /dev/null
@@ -1,18 +0,0 @@
-#%PAM-1.0
-# $Id$
-
-auth        required      pam_env.so
-auth        sufficient    pam_winbind.so
-auth        sufficient    pam_unix.so likeauth nullok use_first_pass
-auth        required      pam_deny.so
-
-account     sufficient    pam_winbind.so
-account     required      pam_unix.so
-
-password    required      pam_cracklib.so retry=3
-password    sufficient    pam_unix.so nullok use_authtok md5 shadow
-password    required      pam_deny.so
-
-session     required      pam_mkhomedir.so skel=/etc/skel/ umask=0022 
-session     required      pam_limits.so
-session     required      pam_unix.so