summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDaniel Pielmeier <billie@gentoo.org>2017-09-27 22:43:33 +0200
committerDaniel Pielmeier <billie@gentoo.org>2017-09-27 22:43:33 +0200
commit8fba11ae70a32d555da387e1c5ed1a13fc64208f (patch)
treee6ebf2f7a1372a090160b50e31ed14a96fe6a785 /net-print
parentnet-print/hplip-plugin: Remove old. (diff)
downloadgentoo-8fba11ae70a32d555da387e1c5ed1a13fc64208f.tar.gz
gentoo-8fba11ae70a32d555da387e1c5ed1a13fc64208f.tar.bz2
gentoo-8fba11ae70a32d555da387e1c5ed1a13fc64208f.zip
net-print/hplip: Remove old.
Package-Manager: Portage-2.3.8, Repoman-2.3.1
Diffstat (limited to 'net-print')
-rw-r--r--net-print/hplip/Manifest3
-rw-r--r--net-print/hplip/hplip-3.17.6.ebuild254
-rw-r--r--net-print/hplip/hplip-3.17.7.ebuild254
-rw-r--r--net-print/hplip/hplip-3.17.9.ebuild254
4 files changed, 0 insertions, 765 deletions
diff --git a/net-print/hplip/Manifest b/net-print/hplip/Manifest
index a78e0ffdbf8d..99d2ff9ebb85 100644
--- a/net-print/hplip/Manifest
+++ b/net-print/hplip/Manifest
@@ -1,7 +1,4 @@
DIST hplip-3.16.2-patches-1.tar.xz 8188 SHA256 8a9a78e0caac1731eae79f047a6054b411c237c579fdfd07bc59d435db708705 SHA512 7eb03c093cfb9ef6b9a980ef5520575310d080c45ed13191933a5facaf9bbb04b38c8381762a3ecd33884ad582830e61e17b6c17f2ed7cdf910670e05eed2510 WHIRLPOOL 6721eac17977485eae0cb22b1702d0479003e3639e806ecd3c5888f1b5015a0bf904512104ebefee4b3d5f64abebd0608090e00310ec8d5b48f210c7e4a95e4e
DIST hplip-3.16.3.tar.gz 22408596 SHA256 42d2302ee38bda41caa0f2f9524a91f531e3aa432814ffd45b3e5c396dc30194 SHA512 32d2f88c0983208e77592f73bf65cf2900cd6aa234d09220a18b45b5fc4bd0d10e9cfc8c7a10639e5a51ad5f5d0f8ed7bd477d08c86b89c633a1bbcd42682915 WHIRLPOOL b287ecf80c2e7b0da0de0afefcf60c507f9d42c74dbba1e745b4b43f253a5b0dedb6398a1f073e14d196296da47764e983138c0151e05bfc7a5dd416458662a0
-DIST hplip-3.16.5-patches-1.tar.xz 8200 SHA256 98866e57a247e7a30d9cd584ed9411aa79a6185294a73b4cc5961efe9a5e5fa6 SHA512 36d33da5fc4105183cbc5137845ddccd8ab2b6abbff053a3a51f3da61c26c2d9d48dcb735345fb453abd67b6a0797aa337102c366cce037bc7006599b20b1646 WHIRLPOOL 8ac91bdefeb177c092b1d6de16474e8e1da57ad046dbc579f14fd40a27d1837d9bf142573137ef8d91c37dc7b03ca908fd5bfad23a9815af2015b521091c2700
-DIST hplip-3.17.6.tar.gz 23620156 SHA256 80287834aad7e3fa30f2e252ff281d351e3f2eb15267ac541531353dc7b5107e SHA512 370fa0e07f4f5b4dc4a6f52b02271102894da98bc902912ff1770a9e5029d486227f4170ff90a063c686d23e8bd075961073ecc59961419a226a850db9e71738 WHIRLPOOL d938d36cba1c9d34e02709e75209a9c4e0bc7db0f7fbbb875bab41e57009a9522f12cf5bcfc03530d5ad46c2b2bb3575e68898e8071116a03240cd7042e4b2b0
-DIST hplip-3.17.7.tar.gz 23644395 SHA256 3577bd5afd40b73fd754664ad69f0187dde2e64879e7446309f2ed9fd7dc400d SHA512 f88c16d5b6e1986df5b7c1081802ed4832849de8d8b01961231965b115731eb9bd5c18fa52d5bf2eb412927b9de0057bf8025a1579b053c4d8441f0ad4e7ce3f WHIRLPOOL 2e0f0743ffce6d66970815d621a55618a00c360f2f4aa31a1742fcd17ad246a2717f5507b1b4910a93ea5fc06b5d7e87dfb2f08c50993c85bb6a654d13faf527
DIST hplip-3.17.9-patches-1.tar.xz 8484 SHA256 2ec368039a59e375bebf565bd679dd3bedb1e0c1ecfc103c5dcf9bb2701ba9d7 SHA512 125f9cfd1c3cad662ce33954b8ab9ab1898368b449c4ad78dfe99f29de8025183773272b9865cd22b976a30c502e38254ce0ac59d685299dff7f9314927d546a WHIRLPOOL 2354bd3b158733b668c731ea3fd605170dd4cc0df5ffebc327a69ad33995ec02166d34897567ed69d608a62e97b33bd12fc0066acb6c302677cc68830a2661cf
DIST hplip-3.17.9.tar.gz 23862533 SHA256 b2aad842f51dae7da2dd08d09ce2c27bc5f73c82a560b9494dd33589b0948678 SHA512 25508b91723be9564b9a7e8093159507a1a01a9e50e9e801f452f71c28cce0bddee2f5bf796214fa5752de8d1799fc6fe102779dabae0dbcba1f4de6b207c095 WHIRLPOOL df3bd0a8c4af9e7bf2a4ee534b317e84d89707587f770ab0c6ae98ccd5bea50d8be704ed2f855c9f67af8cdd34afc2ab0b07bd150f8861fc4900aa471a85b6ee
diff --git a/net-print/hplip/hplip-3.17.6.ebuild b/net-print/hplip/hplip-3.17.6.ebuild
deleted file mode 100644
index 2fb4096c4542..000000000000
--- a/net-print/hplip/hplip-3.17.6.ebuild
+++ /dev/null
@@ -1,254 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-PYTHON_COMPAT=( python{2_7,3_4,3_5} )
-PYTHON_REQ_USE="threads,xml"
-
-inherit autotools linux-info python-single-r1 readme.gentoo-r1 udev
-
-DESCRIPTION="HP Linux Imaging and Printing - Print, scan, fax drivers and service tools"
-HOMEPAGE="http://hplipopensource.com/hplip-web/index.html"
-SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz
- https://dev.gentoo.org/~billie/distfiles/${PN}-3.16.5-patches-1.tar.xz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~arm ~ppc ~ppc64 ~x86"
-
-IUSE="doc fax +hpcups hpijs kde libressl -libusb0 minimal parport policykit qt5 scanner +snmp static-ppds X"
-
-# dependency on dev-python/notify-python dropped due to python 3 incompatibility
-# possible replacement notify2 (https://pypi.python.org/pypi/notify2/0.3) not in tree
-
-COMMON_DEPEND="
- net-print/cups
- virtual/jpeg:0
- hpijs? ( net-print/cups-filters[foomatic] )
- !minimal? (
- ${PYTHON_DEPS}
- sys-apps/dbus
- !libusb0? ( virtual/libusb:1 )
- libusb0? ( virtual/libusb:0 )
- scanner? ( media-gfx/sane-backends )
- snmp? (
- !libressl? ( dev-libs/openssl:0= )
- libressl? ( dev-libs/libressl:= )
- net-analyzer/net-snmp
- )
- )
-"
-DEPEND="${COMMON_DEPEND}
- virtual/pkgconfig
-"
-RDEPEND="${COMMON_DEPEND}
- app-text/ghostscript-gpl
- !minimal? (
- >=dev-python/dbus-python-1.2.0-r1[${PYTHON_USEDEP}]
- $(python_gen_cond_dep 'dev-python/pygobject:2[${PYTHON_USEDEP}]' 'python2*')
- $(python_gen_cond_dep 'dev-python/pygobject:3[${PYTHON_USEDEP}]' 'python3*')
- fax? ( dev-python/reportlab[${PYTHON_USEDEP}] )
- kernel_linux? ( virtual/udev )
- qt5? ( >=dev-python/PyQt5-5.5.1[dbus,gui,widgets,${PYTHON_USEDEP}] )
- scanner? (
- >=dev-python/reportlab-3.2[${PYTHON_USEDEP}]
- >=dev-python/pillow-3.1.1[${PYTHON_USEDEP}]
- X? ( || (
- kde? ( kde-misc/skanlite )
- media-gfx/xsane
- media-gfx/sane-frontends
- ) )
- )
- )
- policykit? ( sys-auth/polkit )
-"
-
-REQUIRED_USE="!minimal? ( ${PYTHON_REQUIRED_USE} )"
-
-PATCHES=(
- "${WORKDIR}/patches"
-)
-
-CONFIG_CHECK="~PARPORT ~PPDEV"
-ERROR_PARPORT="Please make sure kernel parallel port support is enabled (PARPORT and PPDEV)."
-
-#DISABLE_AUTOFORMATTING="yes"
-DOC_CONTENTS="
-For more information on setting up your printer please take
-a look at the hplip section of the gentoo printing guide:
-https://wiki.gentoo.org/wiki/Printing
-
-Any user who wants to print must be in the lp group.
-"
-
-pkg_setup() {
- use !minimal && python-single-r1_pkg_setup
-
- use scanner && ! use X && ewarn "You need USE=X for the scanner GUI."
-
- if ! use hpcups && ! use hpijs ; then
- ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver,"
- ewarn "which is probably not what you want."
- ewarn "You will almost certainly not be able to print."
- fi
-
- if use minimal ; then
- ewarn "Installing driver portions only, make sure you know what you are doing."
- ewarn "Depending on the USE flags set for hpcups or hpijs the appropiate driver"
- ewarn "is installed. If both USE flags are set hpijs overrides hpcups."
- else
- use parport && linux-info_pkg_setup
- fi
-}
-
-src_prepare() {
- default
-
- if use !minimal ; then
- python_export EPYTHON PYTHON
- python_fix_shebang .
- fi
-
- # Make desktop files follow the specification
- # Gentoo bug: https://bugs.gentoo.org/show_bug.cgi?id=443680
- # Upstream bug: https://bugs.launchpad.net/hplip/+bug/1080324
- sed -i -e '/^Categories=/s/Application;//' \
- -e '/^Encoding=.*/d' hplip.desktop.in || die
- sed -i -e '/^Categories=/s/Application;//' \
- -e '/^Version=.*/d' \
- -e '/^Comment=.*/d' hplip-systray.desktop.in || die
-
- # Fix for Gentoo bug https://bugs.gentoo.org/show_bug.cgi?id=345725
- # Upstream bug: https://bugs.launchpad.net/hplip/+bug/880847,
- # https://bugs.launchpad.net/hplip/+bug/500086
- local udevdir=$(get_udevdir)
- sed -i -e "s|/etc/udev|${udevdir}|g" \
- $(find . -type f -exec grep -l /etc/udev {} +) || die
-
- # Force recognition of Gentoo distro by hp-check
- sed -i \
- -e "s:file('/etc/issue', 'r').read():'Gentoo':" \
- installer/core_install.py || die
-
- # Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip
- # The hpcups driver does not use foomatic-rip
- local i
- for i in ppd/hpijs/*.ppd.gz ; do
- rm -f ${i}.temp || die
- gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | \
- gzip > ${i}.temp || die
- mv ${i}.temp ${i} || die
- done
-
- eautoreconf
-}
-
-src_configure() {
- local myconf drv_build minimal_build
-
- if use libusb0 ; then
- myconf="${myconf} --enable-libusb01_build"
- else
- myconf="${myconf} --disable-libusb01_build"
- fi
-
- if use hpcups ; then
- drv_build="$(use_enable hpcups hpcups-install)"
- if use static-ppds ; then
- drv_build="${drv_build} --enable-cups-ppd-install"
- drv_build="${drv_build} --disable-cups-drv-install"
- else
- drv_build="${drv_build} --enable-cups-drv-install"
- drv_build="${drv_build} --disable-cups-ppd-install"
- fi
- else
- drv_build="--disable-hpcups-install"
- drv_build="${drv_build} --disable-cups-drv-install"
- drv_build="${drv_build} --disable-cups-ppd-install"
- fi
-
- if use hpijs ; then
- drv_build="${drv_build} $(use_enable hpijs hpijs-install)"
- if use static-ppds ; then
- drv_build="${drv_build} --enable-foomatic-ppd-install"
- drv_build="${drv_build} --disable-foomatic-drv-install"
- else
- drv_build="${drv_build} --enable-foomatic-drv-install"
- drv_build="${drv_build} --disable-foomatic-ppd-install"
- fi
- else
- drv_build="${drv_build} --disable-hpijs-install"
- drv_build="${drv_build} --disable-foomatic-drv-install"
- drv_build="${drv_build} --disable-foomatic-ppd-install"
- fi
-
- if use minimal ; then
- if use hpijs ; then
- minimal_build="--enable-hpijs-only-build"
- else
- minimal_build="--disable-hpijs-only-build"
- fi
- if use hpcups ; then
- minimal_build="${minimal_build} --enable-hpcups-only-build"
- else
- minimal_build="${minimal_build} --disable-hpcups-only-build"
- fi
- fi
-
- econf \
- --disable-cups11-build \
- --disable-lite-build \
- --disable-foomatic-rip-hplip-install \
- --disable-shadow-build \
- --disable-qt3 \
- --disable-qt4 \
- --disable-udev_sysfs_rules \
- --with-cupsbackenddir=$(cups-config --serverbin)/backend \
- --with-cupsfilterdir=$(cups-config --serverbin)/filter \
- --with-docdir=/usr/share/doc/${PF} \
- --with-htmldir=/usr/share/doc/${PF}/html \
- ${myconf} \
- ${drv_build} \
- ${minimal_build} \
- $(use_enable doc doc-build) \
- $(use_enable fax fax-build) \
- $(use_enable !minimal gui-build) \
- $(use_enable !minimal dbus-build) \
- $(use_enable parport pp-build) \
- $(use_enable policykit) \
- $(use_enable qt5) \
- $(use_enable scanner scan-build) \
- $(use_enable snmp network-build)
-}
-
-src_install() {
- # disable parallel install
- # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=578018
- emake -j1 DESTDIR="${D}" install
- einstalldocs
- # default
-
- # Installed by sane-backends
- # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=201023
- rm -f "${ED%/}"/etc/sane.d/dll.conf || die
-
- rm -f "${ED%/}"/usr/share/doc/${PF}/{copyright,README_LIBJPG,COPYING} || die
- rmdir --ignore-fail-on-non-empty "${ED%/}"/usr/share/doc/${PF}/ || die
-
- # Remove hal fdi files
- rm -rf "${ED%/}"/usr/share/hal || die
-
- find "${D}" -name '*.la' -delete || die
-
- if use !minimal ; then
- python_export EPYTHON PYTHON
- python_optimize "${ED%/}"/usr/share/hplip
- fi
-
- readme.gentoo_create_doc
-}
-
-pkg_postinst() {
- readme.gentoo_print_elog
-}
diff --git a/net-print/hplip/hplip-3.17.7.ebuild b/net-print/hplip/hplip-3.17.7.ebuild
deleted file mode 100644
index a03a682bccb7..000000000000
--- a/net-print/hplip/hplip-3.17.7.ebuild
+++ /dev/null
@@ -1,254 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-PYTHON_COMPAT=( python{2_7,3_4,3_5,3_6} )
-PYTHON_REQ_USE="threads,xml"
-
-inherit autotools linux-info python-single-r1 readme.gentoo-r1 udev
-
-DESCRIPTION="HP Linux Imaging and Printing - Print, scan, fax drivers and service tools"
-HOMEPAGE="http://hplipopensource.com/hplip-web/index.html"
-SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz
- https://dev.gentoo.org/~billie/distfiles/${PN}-3.16.5-patches-1.tar.xz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~arm ~ppc ~ppc64 ~x86"
-
-IUSE="doc fax +hpcups hpijs kde libressl -libusb0 minimal parport policykit qt5 scanner +snmp static-ppds X"
-
-# dependency on dev-python/notify-python dropped due to python 3 incompatibility
-# possible replacement notify2 (https://pypi.python.org/pypi/notify2/0.3) not in tree
-
-COMMON_DEPEND="
- net-print/cups
- virtual/jpeg:0
- hpijs? ( net-print/cups-filters[foomatic] )
- !minimal? (
- ${PYTHON_DEPS}
- sys-apps/dbus
- !libusb0? ( virtual/libusb:1 )
- libusb0? ( virtual/libusb:0 )
- scanner? ( media-gfx/sane-backends )
- snmp? (
- !libressl? ( dev-libs/openssl:0= )
- libressl? ( dev-libs/libressl:= )
- net-analyzer/net-snmp
- )
- )
-"
-DEPEND="${COMMON_DEPEND}
- virtual/pkgconfig
-"
-RDEPEND="${COMMON_DEPEND}
- app-text/ghostscript-gpl
- !minimal? (
- >=dev-python/dbus-python-1.2.0-r1[${PYTHON_USEDEP}]
- $(python_gen_cond_dep 'dev-python/pygobject:2[${PYTHON_USEDEP}]' 'python2*')
- $(python_gen_cond_dep 'dev-python/pygobject:3[${PYTHON_USEDEP}]' 'python3*')
- fax? ( dev-python/reportlab[${PYTHON_USEDEP}] )
- kernel_linux? ( virtual/udev )
- qt5? ( >=dev-python/PyQt5-5.5.1[dbus,gui,widgets,${PYTHON_USEDEP}] )
- scanner? (
- >=dev-python/reportlab-3.2[${PYTHON_USEDEP}]
- >=dev-python/pillow-3.1.1[${PYTHON_USEDEP}]
- X? ( || (
- kde? ( kde-misc/skanlite )
- media-gfx/xsane
- media-gfx/sane-frontends
- ) )
- )
- )
- policykit? ( sys-auth/polkit )
-"
-
-REQUIRED_USE="!minimal? ( ${PYTHON_REQUIRED_USE} )"
-
-PATCHES=(
- "${WORKDIR}/patches"
-)
-
-CONFIG_CHECK="~PARPORT ~PPDEV"
-ERROR_PARPORT="Please make sure kernel parallel port support is enabled (PARPORT and PPDEV)."
-
-#DISABLE_AUTOFORMATTING="yes"
-DOC_CONTENTS="
-For more information on setting up your printer please take
-a look at the hplip section of the gentoo printing guide:
-https://wiki.gentoo.org/wiki/Printing
-
-Any user who wants to print must be in the lp group.
-"
-
-pkg_setup() {
- use !minimal && python-single-r1_pkg_setup
-
- use scanner && ! use X && ewarn "You need USE=X for the scanner GUI."
-
- if ! use hpcups && ! use hpijs ; then
- ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver,"
- ewarn "which is probably not what you want."
- ewarn "You will almost certainly not be able to print."
- fi
-
- if use minimal ; then
- ewarn "Installing driver portions only, make sure you know what you are doing."
- ewarn "Depending on the USE flags set for hpcups or hpijs the appropiate driver"
- ewarn "is installed. If both USE flags are set hpijs overrides hpcups."
- else
- use parport && linux-info_pkg_setup
- fi
-}
-
-src_prepare() {
- default
-
- if use !minimal ; then
- python_export EPYTHON PYTHON
- python_fix_shebang .
- fi
-
- # Make desktop files follow the specification
- # Gentoo bug: https://bugs.gentoo.org/show_bug.cgi?id=443680
- # Upstream bug: https://bugs.launchpad.net/hplip/+bug/1080324
- sed -i -e '/^Categories=/s/Application;//' \
- -e '/^Encoding=.*/d' hplip.desktop.in || die
- sed -i -e '/^Categories=/s/Application;//' \
- -e '/^Version=.*/d' \
- -e '/^Comment=.*/d' hplip-systray.desktop.in || die
-
- # Fix for Gentoo bug https://bugs.gentoo.org/show_bug.cgi?id=345725
- # Upstream bug: https://bugs.launchpad.net/hplip/+bug/880847,
- # https://bugs.launchpad.net/hplip/+bug/500086
- local udevdir=$(get_udevdir)
- sed -i -e "s|/etc/udev|${udevdir}|g" \
- $(find . -type f -exec grep -l /etc/udev {} +) || die
-
- # Force recognition of Gentoo distro by hp-check
- sed -i \
- -e "s:file('/etc/issue', 'r').read():'Gentoo':" \
- installer/core_install.py || die
-
- # Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip
- # The hpcups driver does not use foomatic-rip
- local i
- for i in ppd/hpijs/*.ppd.gz ; do
- rm -f ${i}.temp || die
- gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | \
- gzip > ${i}.temp || die
- mv ${i}.temp ${i} || die
- done
-
- eautoreconf
-}
-
-src_configure() {
- local myconf drv_build minimal_build
-
- if use libusb0 ; then
- myconf="${myconf} --enable-libusb01_build"
- else
- myconf="${myconf} --disable-libusb01_build"
- fi
-
- if use hpcups ; then
- drv_build="$(use_enable hpcups hpcups-install)"
- if use static-ppds ; then
- drv_build="${drv_build} --enable-cups-ppd-install"
- drv_build="${drv_build} --disable-cups-drv-install"
- else
- drv_build="${drv_build} --enable-cups-drv-install"
- drv_build="${drv_build} --disable-cups-ppd-install"
- fi
- else
- drv_build="--disable-hpcups-install"
- drv_build="${drv_build} --disable-cups-drv-install"
- drv_build="${drv_build} --disable-cups-ppd-install"
- fi
-
- if use hpijs ; then
- drv_build="${drv_build} $(use_enable hpijs hpijs-install)"
- if use static-ppds ; then
- drv_build="${drv_build} --enable-foomatic-ppd-install"
- drv_build="${drv_build} --disable-foomatic-drv-install"
- else
- drv_build="${drv_build} --enable-foomatic-drv-install"
- drv_build="${drv_build} --disable-foomatic-ppd-install"
- fi
- else
- drv_build="${drv_build} --disable-hpijs-install"
- drv_build="${drv_build} --disable-foomatic-drv-install"
- drv_build="${drv_build} --disable-foomatic-ppd-install"
- fi
-
- if use minimal ; then
- if use hpijs ; then
- minimal_build="--enable-hpijs-only-build"
- else
- minimal_build="--disable-hpijs-only-build"
- fi
- if use hpcups ; then
- minimal_build="${minimal_build} --enable-hpcups-only-build"
- else
- minimal_build="${minimal_build} --disable-hpcups-only-build"
- fi
- fi
-
- econf \
- --disable-cups11-build \
- --disable-lite-build \
- --disable-foomatic-rip-hplip-install \
- --disable-shadow-build \
- --disable-qt3 \
- --disable-qt4 \
- --disable-udev_sysfs_rules \
- --with-cupsbackenddir=$(cups-config --serverbin)/backend \
- --with-cupsfilterdir=$(cups-config --serverbin)/filter \
- --with-docdir=/usr/share/doc/${PF} \
- --with-htmldir=/usr/share/doc/${PF}/html \
- ${myconf} \
- ${drv_build} \
- ${minimal_build} \
- $(use_enable doc doc-build) \
- $(use_enable fax fax-build) \
- $(use_enable !minimal gui-build) \
- $(use_enable !minimal dbus-build) \
- $(use_enable parport pp-build) \
- $(use_enable policykit) \
- $(use_enable qt5) \
- $(use_enable scanner scan-build) \
- $(use_enable snmp network-build)
-}
-
-src_install() {
- # disable parallel install
- # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=578018
- emake -j1 DESTDIR="${D}" install
- einstalldocs
- # default
-
- # Installed by sane-backends
- # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=201023
- rm -f "${ED%/}"/etc/sane.d/dll.conf || die
-
- rm -f "${ED%/}"/usr/share/doc/${PF}/{copyright,README_LIBJPG,COPYING} || die
- rmdir --ignore-fail-on-non-empty "${ED%/}"/usr/share/doc/${PF}/ || die
-
- # Remove hal fdi files
- rm -rf "${ED%/}"/usr/share/hal || die
-
- find "${D}" -name '*.la' -delete || die
-
- if use !minimal ; then
- python_export EPYTHON PYTHON
- python_optimize "${ED%/}"/usr/share/hplip
- fi
-
- readme.gentoo_create_doc
-}
-
-pkg_postinst() {
- readme.gentoo_print_elog
-}
diff --git a/net-print/hplip/hplip-3.17.9.ebuild b/net-print/hplip/hplip-3.17.9.ebuild
deleted file mode 100644
index a03a682bccb7..000000000000
--- a/net-print/hplip/hplip-3.17.9.ebuild
+++ /dev/null
@@ -1,254 +0,0 @@
-# Copyright 1999-2017 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-EAPI=6
-
-PYTHON_COMPAT=( python{2_7,3_4,3_5,3_6} )
-PYTHON_REQ_USE="threads,xml"
-
-inherit autotools linux-info python-single-r1 readme.gentoo-r1 udev
-
-DESCRIPTION="HP Linux Imaging and Printing - Print, scan, fax drivers and service tools"
-HOMEPAGE="http://hplipopensource.com/hplip-web/index.html"
-SRC_URI="mirror://sourceforge/hplip/${P}.tar.gz
- https://dev.gentoo.org/~billie/distfiles/${PN}-3.16.5-patches-1.tar.xz"
-
-LICENSE="GPL-2"
-SLOT="0"
-KEYWORDS="~amd64 ~arm ~ppc ~ppc64 ~x86"
-
-IUSE="doc fax +hpcups hpijs kde libressl -libusb0 minimal parport policykit qt5 scanner +snmp static-ppds X"
-
-# dependency on dev-python/notify-python dropped due to python 3 incompatibility
-# possible replacement notify2 (https://pypi.python.org/pypi/notify2/0.3) not in tree
-
-COMMON_DEPEND="
- net-print/cups
- virtual/jpeg:0
- hpijs? ( net-print/cups-filters[foomatic] )
- !minimal? (
- ${PYTHON_DEPS}
- sys-apps/dbus
- !libusb0? ( virtual/libusb:1 )
- libusb0? ( virtual/libusb:0 )
- scanner? ( media-gfx/sane-backends )
- snmp? (
- !libressl? ( dev-libs/openssl:0= )
- libressl? ( dev-libs/libressl:= )
- net-analyzer/net-snmp
- )
- )
-"
-DEPEND="${COMMON_DEPEND}
- virtual/pkgconfig
-"
-RDEPEND="${COMMON_DEPEND}
- app-text/ghostscript-gpl
- !minimal? (
- >=dev-python/dbus-python-1.2.0-r1[${PYTHON_USEDEP}]
- $(python_gen_cond_dep 'dev-python/pygobject:2[${PYTHON_USEDEP}]' 'python2*')
- $(python_gen_cond_dep 'dev-python/pygobject:3[${PYTHON_USEDEP}]' 'python3*')
- fax? ( dev-python/reportlab[${PYTHON_USEDEP}] )
- kernel_linux? ( virtual/udev )
- qt5? ( >=dev-python/PyQt5-5.5.1[dbus,gui,widgets,${PYTHON_USEDEP}] )
- scanner? (
- >=dev-python/reportlab-3.2[${PYTHON_USEDEP}]
- >=dev-python/pillow-3.1.1[${PYTHON_USEDEP}]
- X? ( || (
- kde? ( kde-misc/skanlite )
- media-gfx/xsane
- media-gfx/sane-frontends
- ) )
- )
- )
- policykit? ( sys-auth/polkit )
-"
-
-REQUIRED_USE="!minimal? ( ${PYTHON_REQUIRED_USE} )"
-
-PATCHES=(
- "${WORKDIR}/patches"
-)
-
-CONFIG_CHECK="~PARPORT ~PPDEV"
-ERROR_PARPORT="Please make sure kernel parallel port support is enabled (PARPORT and PPDEV)."
-
-#DISABLE_AUTOFORMATTING="yes"
-DOC_CONTENTS="
-For more information on setting up your printer please take
-a look at the hplip section of the gentoo printing guide:
-https://wiki.gentoo.org/wiki/Printing
-
-Any user who wants to print must be in the lp group.
-"
-
-pkg_setup() {
- use !minimal && python-single-r1_pkg_setup
-
- use scanner && ! use X && ewarn "You need USE=X for the scanner GUI."
-
- if ! use hpcups && ! use hpijs ; then
- ewarn "Installing neither hpcups (USE=-hpcups) nor hpijs (USE=-hpijs) driver,"
- ewarn "which is probably not what you want."
- ewarn "You will almost certainly not be able to print."
- fi
-
- if use minimal ; then
- ewarn "Installing driver portions only, make sure you know what you are doing."
- ewarn "Depending on the USE flags set for hpcups or hpijs the appropiate driver"
- ewarn "is installed. If both USE flags are set hpijs overrides hpcups."
- else
- use parport && linux-info_pkg_setup
- fi
-}
-
-src_prepare() {
- default
-
- if use !minimal ; then
- python_export EPYTHON PYTHON
- python_fix_shebang .
- fi
-
- # Make desktop files follow the specification
- # Gentoo bug: https://bugs.gentoo.org/show_bug.cgi?id=443680
- # Upstream bug: https://bugs.launchpad.net/hplip/+bug/1080324
- sed -i -e '/^Categories=/s/Application;//' \
- -e '/^Encoding=.*/d' hplip.desktop.in || die
- sed -i -e '/^Categories=/s/Application;//' \
- -e '/^Version=.*/d' \
- -e '/^Comment=.*/d' hplip-systray.desktop.in || die
-
- # Fix for Gentoo bug https://bugs.gentoo.org/show_bug.cgi?id=345725
- # Upstream bug: https://bugs.launchpad.net/hplip/+bug/880847,
- # https://bugs.launchpad.net/hplip/+bug/500086
- local udevdir=$(get_udevdir)
- sed -i -e "s|/etc/udev|${udevdir}|g" \
- $(find . -type f -exec grep -l /etc/udev {} +) || die
-
- # Force recognition of Gentoo distro by hp-check
- sed -i \
- -e "s:file('/etc/issue', 'r').read():'Gentoo':" \
- installer/core_install.py || die
-
- # Use system foomatic-rip for hpijs driver instead of foomatic-rip-hplip
- # The hpcups driver does not use foomatic-rip
- local i
- for i in ppd/hpijs/*.ppd.gz ; do
- rm -f ${i}.temp || die
- gunzip -c ${i} | sed 's/foomatic-rip-hplip/foomatic-rip/g' | \
- gzip > ${i}.temp || die
- mv ${i}.temp ${i} || die
- done
-
- eautoreconf
-}
-
-src_configure() {
- local myconf drv_build minimal_build
-
- if use libusb0 ; then
- myconf="${myconf} --enable-libusb01_build"
- else
- myconf="${myconf} --disable-libusb01_build"
- fi
-
- if use hpcups ; then
- drv_build="$(use_enable hpcups hpcups-install)"
- if use static-ppds ; then
- drv_build="${drv_build} --enable-cups-ppd-install"
- drv_build="${drv_build} --disable-cups-drv-install"
- else
- drv_build="${drv_build} --enable-cups-drv-install"
- drv_build="${drv_build} --disable-cups-ppd-install"
- fi
- else
- drv_build="--disable-hpcups-install"
- drv_build="${drv_build} --disable-cups-drv-install"
- drv_build="${drv_build} --disable-cups-ppd-install"
- fi
-
- if use hpijs ; then
- drv_build="${drv_build} $(use_enable hpijs hpijs-install)"
- if use static-ppds ; then
- drv_build="${drv_build} --enable-foomatic-ppd-install"
- drv_build="${drv_build} --disable-foomatic-drv-install"
- else
- drv_build="${drv_build} --enable-foomatic-drv-install"
- drv_build="${drv_build} --disable-foomatic-ppd-install"
- fi
- else
- drv_build="${drv_build} --disable-hpijs-install"
- drv_build="${drv_build} --disable-foomatic-drv-install"
- drv_build="${drv_build} --disable-foomatic-ppd-install"
- fi
-
- if use minimal ; then
- if use hpijs ; then
- minimal_build="--enable-hpijs-only-build"
- else
- minimal_build="--disable-hpijs-only-build"
- fi
- if use hpcups ; then
- minimal_build="${minimal_build} --enable-hpcups-only-build"
- else
- minimal_build="${minimal_build} --disable-hpcups-only-build"
- fi
- fi
-
- econf \
- --disable-cups11-build \
- --disable-lite-build \
- --disable-foomatic-rip-hplip-install \
- --disable-shadow-build \
- --disable-qt3 \
- --disable-qt4 \
- --disable-udev_sysfs_rules \
- --with-cupsbackenddir=$(cups-config --serverbin)/backend \
- --with-cupsfilterdir=$(cups-config --serverbin)/filter \
- --with-docdir=/usr/share/doc/${PF} \
- --with-htmldir=/usr/share/doc/${PF}/html \
- ${myconf} \
- ${drv_build} \
- ${minimal_build} \
- $(use_enable doc doc-build) \
- $(use_enable fax fax-build) \
- $(use_enable !minimal gui-build) \
- $(use_enable !minimal dbus-build) \
- $(use_enable parport pp-build) \
- $(use_enable policykit) \
- $(use_enable qt5) \
- $(use_enable scanner scan-build) \
- $(use_enable snmp network-build)
-}
-
-src_install() {
- # disable parallel install
- # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=578018
- emake -j1 DESTDIR="${D}" install
- einstalldocs
- # default
-
- # Installed by sane-backends
- # Gentoo Bug: https://bugs.gentoo.org/show_bug.cgi?id=201023
- rm -f "${ED%/}"/etc/sane.d/dll.conf || die
-
- rm -f "${ED%/}"/usr/share/doc/${PF}/{copyright,README_LIBJPG,COPYING} || die
- rmdir --ignore-fail-on-non-empty "${ED%/}"/usr/share/doc/${PF}/ || die
-
- # Remove hal fdi files
- rm -rf "${ED%/}"/usr/share/hal || die
-
- find "${D}" -name '*.la' -delete || die
-
- if use !minimal ; then
- python_export EPYTHON PYTHON
- python_optimize "${ED%/}"/usr/share/hplip
- fi
-
- readme.gentoo_create_doc
-}
-
-pkg_postinst() {
- readme.gentoo_print_elog
-}