proj/gentoo: Initial commit

This commit represents a new era for Gentoo:
Storing the gentoo-x86 tree in Git, as converted from CVS.

This commit is the start of the NEW history.
Any historical data is intended to be grafted onto this point.

Creation process:
1. Take final CVS checkout snapshot
2. Remove ALL ChangeLog* files
3. Transform all Manifests to thin
4. Remove empty Manifests
5. Convert all stale $Header$/$Id$ CVS keywords to non-expanded Git $Id$
5.1. Do not touch files with -kb/-ko keyword flags.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
X-Thanks: Alec Warner <antarus@gentoo.org> - did the GSoC 2006 migration tests
X-Thanks: Robin H. Johnson <robbat2@gentoo.org> - infra guy, herding this project
X-Thanks: Nguyen Thai Ngoc Duy <pclouds@gentoo.org> - Former Gentoo developer, wrote Git features for the migration
X-Thanks: Brian Harring <ferringb@gentoo.org> - wrote much python to improve cvs2svn
X-Thanks: Rich Freeman <rich0@gentoo.org> - validation scripts
X-Thanks: Patrick Lauer <patrick@gentoo.org> - Gentoo dev, running new 2014 work in migration
X-Thanks: Michał Górny <mgorny@gentoo.org> - scripts, QA, nagging
X-Thanks: All of other Gentoo developers - many ideas and lots of paint on the bikeshed

3 files changed, 166 insertions, 0 deletions

diff --git a/sys-block/vblade/files/conf.d-vblade b/sys-block/vblade/files/conf.d-vblade
new file mode 100644
index 000000000000..c8fb6cde4a69
--- /dev/null
+++ b/sys-block/vblade/files/conf.d-vblade
@@ -0,0 +1,26 @@
+# Copyright 1999-2006 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+# If you intent to run only one vblade, you should edit config_vblade0
+# SYNTAX: SHELF SLOT NETIF SOURCE
+config_vblade0="0 0 eth0 /root/test.img"
+
+# SHELF is a numeric value >= 0
+# SLOT is a numeric value 0 <= X <= 15
+# NETIF is a network interface name
+# SOURCE is a file or block device
+
+# For additional vblades, run:
+# ln -s /etc/init.d/vblade.vblade0 /etc/init.d/vblade.$NAME
+# and define config_$NAME in this file.
+
+# Note that the combination of SHELF:SLOT:NETIF should be unique for your
+# network.
+
+# Some additional examples
+# config_vblade1="0 1 eth0 /root/test2.img"
+# config_foobar="0 1 eth1 /dev/md0"
+
+# vim: ft=filetype=gentoo-conf-d syntax=filetype=gentoo-conf-d :
+# vim: ai sw=2 sts=2 ts=2 :
diff --git a/sys-block/vblade/files/init.d-vblade.vblade0 b/sys-block/vblade/files/init.d-vblade.vblade0
new file mode 100644
index 000000000000..e29ccb19a6b8
--- /dev/null
+++ b/sys-block/vblade/files/init.d-vblade.vblade0
@@ -0,0 +1,120 @@
+#!/sbin/runscript
+# Copyright 1999-2013 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License, v2 or later
+
+extra_commands="checkconfig"
+
+depend() {
+	need net
+}
+
+# bug #218043
+if [ ! -f /etc/init.d/sysfs ]; then
+	conf="$(add_suffix /etc/conf.d/vblade)"
+	[[ -e "${conf}" ]] && source "${conf}"
+	vblade_name="${myservice#*.}"
+else
+	conf="/etc/conf.d/vblade"
+	[[ -e "${conf}" ]] && source "${conf}"
+	vblade_name="${RC_SVCNAME#*.}"
+fi
+
+vblade_conf_variable="config_${vblade_name}"
+vblade_conf="${!vblade_conf_variable}"
+pidfile="/var/run/vblade-${vblade_name}.pid"
+srvname="vblade.${vblade_name}"
+
+getconfig() {
+	tmp="${vblade_conf}"
+	shelf="${tmp/ *}"
+	tmp="${tmp#* }"
+	slot="${tmp/ *}"
+	tmp="${tmp#* }"
+	netif="${tmp/ *}"
+	tmp="${tmp#* }"
+	src="${tmp}"
+	export shelf slot netif src
+}
+
+checkconfig() {
+	if [ -z "${vblade_conf}" ]; then
+		eerror "vblade configuration not specified for ${vblade_name}"
+		return 1
+	fi
+	getconfig
+	
+	is_valid_numeric "${shelf}" 0
+	if [[ $? -ne 0 ]]; then
+		eerror "Shelf '${shelf}' is non-numeric or less than zero."
+		return 1
+	fi
+	is_valid_numeric "${slot}" 0 15
+	if [[ $? -ne 0 ]]; then
+		eerror "Slot '${slot}' is outside the valid range [0..15]."
+		return 1
+	fi
+
+	sysfs_base="/sys/class/net/"
+	procfs_base="/proc/sys/net/ipv4/conf/"
+	if test ! \( -e "${sysfs_base}${netif}" -o -e "${procfs_base}${netif}" \); then
+		eerror "Network interface '${netif}' does not exist"
+		return 1
+	fi
+	
+	if test ! \( -f "${src}" -o -b "${src}" \) ; then
+		eerror "Source '${src}' must be a file or block device"
+		return 1
+	fi
+	
+	if test ! \( -e "${src}" -a -r "${src}" \) ; then
+		eerror "Source '${src}' is not readable."
+		return 1
+	fi
+
+	return 0
+}
+
+is_valid_numeric() {
+	num="${1}"
+	min="${2}"
+	max="${3}"
+	# non-numeric
+	test "$num" -ge "0" 2>/dev/null
+	rc=$?
+	test "$rc" -eq 2 && return 2
+	# check for min
+	test -z "$min" && return 0
+	test "$num" -lt "$min" && return 1
+	# check for max
+	test -z "$max" && return 0
+	test "$num" -gt "$max" && return 1
+	# done
+	return 0
+}
+
+start() {
+	checkconfig || return 1
+	getconfig
+	ebegin "Starting ${srvname}: e${shelf}.${slot} on ${netif} using '${src}'"
+	export LOGTAG="${srvname}"
+	start-stop-daemon --start --quiet \
+	--pidfile ${pidfile} --background \
+	--make-pidfile --exec /usr/sbin/vbladed -- \
+	${shelf} ${slot} ${netif} "${src}" 
+	eend $?
+	
+	#${shelf} ${slot} ${netif} "${src}" 2>&1 | logger -t ${srvname} &
+}
+
+stop() {
+	ebegin "Stopping ${srvname}"
+	#start-stop-daemon --stop --quiet --pidfile ${pidfile}
+	getconfig
+	ps -Ao pid,args | egrep "^[[:space:]]*[[:digit:]]+ /usr/sbin/vbladed? ${shelf} ${slot}" | awk '{print $1}' | xargs kill
+	eend $?
+	
+	#start-stop-daemon --stop --quiet --exec /usr/sbin/vblade
+}
+
+# vim: ft=gentoo-init-d syntax=gentoo-init-d :
+# vim: ai sw=4 sts=4 ts=4 :
diff --git a/sys-block/vblade/files/vbladed b/sys-block/vblade/files/vbladed
new file mode 100644
index 000000000000..7fdf8fb9f57d
--- /dev/null
+++ b/sys-block/vblade/files/vbladed
@@ -0,0 +1,20 @@
+#!/bin/sh
+# Copyright 1999-2004 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+#
+# run a vblade daemon using a logger process
+# output is directed to syslogd
+#
+# Although logging goes to syslog, let's going to
+# protect ourselves against the most common way or
+# calling vbladed: without arguments.
+if [ -z "$*" ]
+then
+    echo "Usage: vbladed <shelf> <slot> <ethn> <device>" >&2
+    exit 1
+fi
+
+[ -z "${LOGTAG}" ] && LOGTAG=vbladed
+
+/usr/sbin/vblade "${@}" </dev/null 2>&1 | /usr/bin/logger -t "${LOGTAG}"