proj/gentoo: Initial commit

This commit represents a new era for Gentoo:
Storing the gentoo-x86 tree in Git, as converted from CVS.

This commit is the start of the NEW history.
Any historical data is intended to be grafted onto this point.

Creation process:
1. Take final CVS checkout snapshot
2. Remove ALL ChangeLog* files
3. Transform all Manifests to thin
4. Remove empty Manifests
5. Convert all stale $Header$/$Id$ CVS keywords to non-expanded Git $Id$
5.1. Do not touch files with -kb/-ko keyword flags.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
X-Thanks: Alec Warner <antarus@gentoo.org> - did the GSoC 2006 migration tests
X-Thanks: Robin H. Johnson <robbat2@gentoo.org> - infra guy, herding this project
X-Thanks: Nguyen Thai Ngoc Duy <pclouds@gentoo.org> - Former Gentoo developer, wrote Git features for the migration
X-Thanks: Brian Harring <ferringb@gentoo.org> - wrote much python to improve cvs2svn
X-Thanks: Rich Freeman <rich0@gentoo.org> - validation scripts
X-Thanks: Patrick Lauer <patrick@gentoo.org> - Gentoo dev, running new 2014 work in migration
X-Thanks: Michał Górny <mgorny@gentoo.org> - scripts, QA, nagging
X-Thanks: All of other Gentoo developers - many ideas and lots of paint on the bikeshed

3 files changed, 84 insertions, 0 deletions

diff --git a/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-cmdline.txt b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-cmdline.txt
new file mode 100644
index 000000000000..39112a2dba61
--- /dev/null
+++ b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-cmdline.txt
@@ -0,0 +1 @@
+ipv6.disable=0 selinux=0 plymouth.enable=0 smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=noop rootwait
diff --git a/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-config.txt b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-config.txt
new file mode 100644
index 000000000000..9401530925de
--- /dev/null
+++ b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-config.txt
@@ -0,0 +1,81 @@
+#from archlinux arm sdcard image
+# uncomment if you get no picture on HDMI for a default "safe" mode
+#hdmi_safe=1
+
+# uncomment this if your display has a black border of unused pixels visible
+# and your display can output without overscan
+#disable_overscan=1
+
+# uncomment the following to adjust overscan. Use positive numbers if console
+# goes off screen, and negative if there is too much border
+#overscan_left=16
+#overscan_right=16
+#overscan_top=16
+#overscan_bottom=16
+
+# uncomment to force a console size. By default it will be display's size minus
+# overscan.
+#framebuffer_width=1280
+#framebuffer_height=720
+
+# uncomment if hdmi display is not detected and composite is being output
+#hdmi_force_hotplug=1
+
+# uncomment to force a specific HDMI mode (this will force VGA)
+#hdmi_group=1
+#hdmi_mode=1
+
+# uncomment to force a HDMI mode rather than DVI. This can make audio work in
+# DMT (computer monitor) modes
+#hdmi_drive=2
+
+# uncomment to increase signal to HDMI, if you have interference, blanking, or
+# no display
+#config_hdmi_boost=4
+
+# uncomment for composite PAL
+#sdtv_mode=2
+
+#uncomment to overclock the arm. 700 MHz is the default.
+#arm_freq=800
+
+# for more options see http://elinux.org/RPi_config.txt
+
+## Some over clocking settings, govenor already set to ondemand
+
+##None
+#arm_freq=700
+#core_freq=250
+#sdram_freq=400
+#over_voltage=0
+
+##Modest
+#arm_freq=800
+#core_freq=300
+#sdram_freq=400
+#over_voltage=0
+
+##Medium
+#arm_freq=900
+#core_freq=333
+#sdram_freq=450
+#over_voltage=2
+
+##High
+#arm_freq=950
+#core_freq=450
+#sdram_freq=450
+#over_voltage=6
+
+##Turbo
+#arm_freq=1000
+#core_freq=500
+#sdram_freq=500
+#over_voltage=6
+
+gpu_mem_512=316
+gpu_mem_256=128
+cma_lwm=16
+cma_hwm=32
+cma_offline_start=16
+
diff --git a/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-envd b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-envd
new file mode 100644
index 000000000000..22ed09320464
--- /dev/null
+++ b/sys-boot/raspberrypi-firmware/files/raspberrypi-firmware-0_p20130711-envd
@@ -0,0 +1,2 @@
+CONFIG_PROTECT="/boot/config.txt /boot/cmdline.txt"
+