diff options
Diffstat (limited to 'dev-libs/icu/files')
| -rw-r--r-- | dev-libs/icu/files/icu-54.1-CVE-2014-9654.patch | 1105 | ||||
| -rw-r--r-- | dev-libs/icu/files/icu-fix-tests-depending-on-date.patch | 15 | ||||
| -rw-r--r-- | dev-libs/icu/files/icu-remove-bashisms.patch | 230 |
3 files changed, 1350 insertions, 0 deletions
diff --git a/dev-libs/icu/files/icu-54.1-CVE-2014-9654.patch b/dev-libs/icu/files/icu-54.1-CVE-2014-9654.patch new file mode 100644 index 000000000000..db86c921bc8c --- /dev/null +++ b/dev-libs/icu/files/icu-54.1-CVE-2014-9654.patch @@ -0,0 +1,1105 @@ +Index: /icu/trunk/source/common/unicode/utypes.h
+===================================================================
+--- /icu/trunk/source/common/unicode/utypes.h (revision 36800)
++++ /icu/trunk/source/common/unicode/utypes.h (revision 36801)
+@@ -648,4 +648,5 @@
+ U_REGEX_TIME_OUT, /**< Maximum allowed match time exceeded */
+ U_REGEX_STOPPED_BY_CALLER, /**< Matching operation aborted by user callback fn. */
++ U_REGEX_PATTERN_TOO_BIG, /**< Pattern exceeds limits on size or complexity. @draft ICU 55 */
+ U_REGEX_ERROR_LIMIT, /**< This must always be the last value to indicate the limit for regexp errors */
+
+Index: /icu/trunk/source/common/utypes.c
+===================================================================
+--- /icu/trunk/source/common/utypes.c (revision 36800)
++++ /icu/trunk/source/common/utypes.c (revision 36801)
+@@ -2,5 +2,5 @@
+ ******************************************************************************
+ *
+-* Copyright (C) 1997-2011, International Business Machines
++* Copyright (C) 1997-2014, International Business Machines
+ * Corporation and others. All Rights Reserved.
+ *
+@@ -166,5 +166,6 @@
+ "U_REGEX_STACK_OVERFLOW",
+ "U_REGEX_TIME_OUT",
+- "U_REGEX_STOPPED_BY_CALLER"
++ "U_REGEX_STOPPED_BY_CALLER",
++ "U_REGEX_PATTERN_TOO_BIG"
+ };
+
+Index: /icu/trunk/source/i18n/regexcmp.cpp
+===================================================================
+--- /icu/trunk/source/i18n/regexcmp.cpp (revision 36800)
++++ /icu/trunk/source/i18n/regexcmp.cpp (revision 36801)
+@@ -305,5 +305,5 @@
+ // the position in the compiled pattern.
+ //
+- fRXPat->fFrameSize+=RESTACKFRAME_HDRCOUNT;
++ allocateStackData(RESTACKFRAME_HDRCOUNT);
+
+ //
+@@ -371,7 +371,7 @@
+ //4 NOP Resreved, will be replaced by a save if there are
+ // OR | operators at the top level
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_STATE_SAVE, 2), *fStatus);
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_JMP, 3), *fStatus);
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_FAIL, 0), *fStatus);
++ appendOp(URX_STATE_SAVE, 2);
++ appendOp(URX_JMP, 3);
++ appendOp(URX_FAIL, 0);
+
+ // Standard open nonCapture paren action emits the two NOPs and
+@@ -396,5 +396,5 @@
+
+ // add the END operation to the compiled pattern.
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_END, 0), *fStatus);
++ appendOp(URX_END, 0);
+
+ // Terminate the pattern compilation state machine.
+@@ -418,5 +418,5 @@
+ int32_t op = (int32_t)fRXPat->fCompiledPat->elementAti(savePosition);
+ U_ASSERT(URX_TYPE(op) == URX_NOP); // original contents of reserved location
+- op = URX_BUILD(URX_STATE_SAVE, fRXPat->fCompiledPat->size()+1);
++ op = buildOp(URX_STATE_SAVE, fRXPat->fCompiledPat->size()+1);
+ fRXPat->fCompiledPat->setElementAt(op, savePosition);
+
+@@ -424,6 +424,5 @@
+ // the JMP will eventually be the location following the ')' for the
+ // group. This will be patched in later, when the ')' is encountered.
+- op = URX_BUILD(URX_JMP, 0);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_JMP, 0);
+
+ // Push the position of the newly added JMP op onto the parentheses stack.
+@@ -434,5 +433,5 @@
+ // for a SAVE in the event that there is yet another '|' following
+ // this one.
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_NOP, 0), *fStatus);
++ appendOp(URX_NOP, 0);
+ fParenStack.push(fRXPat->fCompiledPat->size()-1, *fStatus);
+ }
+@@ -460,10 +459,8 @@
+ {
+ fixLiterals();
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_NOP, 0), *fStatus);
+- int32_t varsLoc = fRXPat->fFrameSize; // Reserve three slots in match stack frame.
+- fRXPat->fFrameSize += 3;
+- int32_t cop = URX_BUILD(URX_START_CAPTURE, varsLoc);
+- fRXPat->fCompiledPat->addElement(cop, *fStatus);
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_NOP, 0), *fStatus);
++ appendOp(URX_NOP, 0);
++ int32_t varsLoc = allocateStackData(3); // Reserve three slots in match stack frame.
++ appendOp(URX_START_CAPTURE, varsLoc);
++ appendOp(URX_NOP, 0);
+
+ // On the Parentheses stack, start a new frame and add the postions
+@@ -490,6 +487,6 @@
+ {
+ fixLiterals();
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_NOP, 0), *fStatus);
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_NOP, 0), *fStatus);
++ appendOp(URX_NOP, 0);
++ appendOp(URX_NOP, 0);
+
+ // On the Parentheses stack, start a new frame and add the postions
+@@ -513,10 +510,8 @@
+ {
+ fixLiterals();
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_NOP, 0), *fStatus);
+- int32_t varLoc = fRXPat->fDataSize; // Reserve a data location for saving the
+- fRXPat->fDataSize += 1; // state stack ptr.
+- int32_t stoOp = URX_BUILD(URX_STO_SP, varLoc);
+- fRXPat->fCompiledPat->addElement(stoOp, *fStatus);
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_NOP, 0), *fStatus);
++ appendOp(URX_NOP, 0);
++ int32_t varLoc = allocateData(1); // Reserve a data location for saving the state stack ptr.
++ appendOp(URX_STO_SP, varLoc);
++ appendOp(URX_NOP, 0);
+
+ // On the Parentheses stack, start a new frame and add the postions
+@@ -561,24 +556,12 @@
+ {
+ fixLiterals();
+- int32_t dataLoc = fRXPat->fDataSize;
+- fRXPat->fDataSize += 2;
+- int32_t op = URX_BUILD(URX_LA_START, dataLoc);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
+-
+- op = URX_BUILD(URX_STATE_SAVE, fRXPat->fCompiledPat->size()+ 2);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
+-
+- op = URX_BUILD(URX_JMP, fRXPat->fCompiledPat->size()+ 3);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
+-
+- op = URX_BUILD(URX_LA_END, dataLoc);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
+-
+- op = URX_BUILD(URX_BACKTRACK, 0);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
+-
+- op = URX_BUILD(URX_NOP, 0);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ int32_t dataLoc = allocateData(2);
++ appendOp(URX_LA_START, dataLoc);
++ appendOp(URX_STATE_SAVE, fRXPat->fCompiledPat->size()+ 2);
++ appendOp(URX_JMP, fRXPat->fCompiledPat->size()+ 3);
++ appendOp(URX_LA_END, dataLoc);
++ appendOp(URX_BACKTRACK, 0);
++ appendOp(URX_NOP, 0);
++ appendOp(URX_NOP, 0);
+
+ // On the Parentheses stack, start a new frame and add the postions
+@@ -605,14 +588,8 @@
+ {
+ fixLiterals();
+- int32_t dataLoc = fRXPat->fDataSize;
+- fRXPat->fDataSize += 2;
+- int32_t op = URX_BUILD(URX_LA_START, dataLoc);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
+-
+- op = URX_BUILD(URX_STATE_SAVE, 0); // dest address will be patched later.
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
+-
+- op = URX_BUILD(URX_NOP, 0);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ int32_t dataLoc = allocateData(2);
++ appendOp(URX_LA_START, dataLoc);
++ appendOp(URX_STATE_SAVE, 0); // dest address will be patched later.
++ appendOp(URX_NOP, 0);
+
+ // On the Parentheses stack, start a new frame and add the postions
+@@ -652,21 +629,17 @@
+
+ // Allocate data space
+- int32_t dataLoc = fRXPat->fDataSize;
+- fRXPat->fDataSize += 4;
++ int32_t dataLoc = allocateData(4);
+
+ // Emit URX_LB_START
+- int32_t op = URX_BUILD(URX_LB_START, dataLoc);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_LB_START, dataLoc);
+
+ // Emit URX_LB_CONT
+- op = URX_BUILD(URX_LB_CONT, dataLoc);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
+- fRXPat->fCompiledPat->addElement(0, *fStatus); // MinMatchLength. To be filled later.
+- fRXPat->fCompiledPat->addElement(0, *fStatus); // MaxMatchLength. To be filled later.
+-
+- // Emit the NOP
+- op = URX_BUILD(URX_NOP, 0);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_LB_CONT, dataLoc);
++ appendOp(URX_RESERVED_OP, 0); // MinMatchLength. To be filled later.
++ appendOp(URX_RESERVED_OP, 0); // MaxMatchLength. To be filled later.
++
++ // Emit the NOPs
++ appendOp(URX_NOP, 0);
++ appendOp(URX_NOP, 0);
+
+ // On the Parentheses stack, start a new frame and add the postions
+@@ -708,22 +681,18 @@
+
+ // Allocate data space
+- int32_t dataLoc = fRXPat->fDataSize;
+- fRXPat->fDataSize += 4;
++ int32_t dataLoc = allocateData(4);
+
+ // Emit URX_LB_START
+- int32_t op = URX_BUILD(URX_LB_START, dataLoc);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_LB_START, dataLoc);
+
+ // Emit URX_LBN_CONT
+- op = URX_BUILD(URX_LBN_CONT, dataLoc);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
+- fRXPat->fCompiledPat->addElement(0, *fStatus); // MinMatchLength. To be filled later.
+- fRXPat->fCompiledPat->addElement(0, *fStatus); // MaxMatchLength. To be filled later.
+- fRXPat->fCompiledPat->addElement(0, *fStatus); // Continue Loc. To be filled later.
+-
+- // Emit the NOP
+- op = URX_BUILD(URX_NOP, 0);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_LBN_CONT, dataLoc);
++ appendOp(URX_RESERVED_OP, 0); // MinMatchLength. To be filled later.
++ appendOp(URX_RESERVED_OP, 0); // MaxMatchLength. To be filled later.
++ appendOp(URX_RESERVED_OP, 0); // Continue Loc. To be filled later.
++
++ // Emit the NOPs
++ appendOp(URX_NOP, 0);
++ appendOp(URX_NOP, 0);
+
+ // On the Parentheses stack, start a new frame and add the postions
+@@ -795,10 +764,7 @@
+ if (URX_TYPE(repeatedOp) == URX_SETREF) {
+ // Emit optimized code for [char set]+
+- int32_t loopOpI = URX_BUILD(URX_LOOP_SR_I, URX_VAL(repeatedOp));
+- fRXPat->fCompiledPat->addElement(loopOpI, *fStatus);
+- frameLoc = fRXPat->fFrameSize;
+- fRXPat->fFrameSize++;
+- int32_t loopOpC = URX_BUILD(URX_LOOP_C, frameLoc);
+- fRXPat->fCompiledPat->addElement(loopOpC, *fStatus);
++ appendOp(URX_LOOP_SR_I, URX_VAL(repeatedOp));
++ frameLoc = allocateStackData(1);
++ appendOp(URX_LOOP_C, frameLoc);
+ break;
+ }
+@@ -808,5 +774,5 @@
+ URX_TYPE(repeatedOp) == URX_DOTANY_UNIX) {
+ // Emit Optimized code for .+ operations.
+- int32_t loopOpI = URX_BUILD(URX_LOOP_DOT_I, 0);
++ int32_t loopOpI = buildOp(URX_LOOP_DOT_I, 0);
+ if (URX_TYPE(repeatedOp) == URX_DOTANY_ALL) {
+ // URX_LOOP_DOT_I operand is a flag indicating ". matches any" mode.
+@@ -816,9 +782,7 @@
+ loopOpI |= 2;
+ }
+- fRXPat->fCompiledPat->addElement(loopOpI, *fStatus);
+- frameLoc = fRXPat->fFrameSize;
+- fRXPat->fFrameSize++;
+- int32_t loopOpC = URX_BUILD(URX_LOOP_C, frameLoc);
+- fRXPat->fCompiledPat->addElement(loopOpC, *fStatus);
++ appendOp(loopOpI);
++ frameLoc = allocateStackData(1);
++ appendOp(URX_LOOP_C, frameLoc);
+ break;
+ }
+@@ -834,16 +798,13 @@
+ // Emit the code sequence that can handle it.
+ insertOp(topLoc);
+- frameLoc = fRXPat->fFrameSize;
+- fRXPat->fFrameSize++;
+-
+- int32_t op = URX_BUILD(URX_STO_INP_LOC, frameLoc);
++ frameLoc = allocateStackData(1);
++
++ int32_t op = buildOp(URX_STO_INP_LOC, frameLoc);
+ fRXPat->fCompiledPat->setElementAt(op, topLoc);
+
+- op = URX_BUILD(URX_JMP_SAV_X, topLoc+1);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_JMP_SAV_X, topLoc+1);
+ } else {
+ // Simpler code when the repeated body must match something non-empty
+- int32_t jmpOp = URX_BUILD(URX_JMP_SAV, topLoc);
+- fRXPat->fCompiledPat->addElement(jmpOp, *fStatus);
++ appendOp(URX_JMP_SAV, topLoc);
+ }
+ }
+@@ -857,6 +818,5 @@
+ {
+ int32_t topLoc = blockTopLoc(FALSE);
+- int32_t saveStateOp = URX_BUILD(URX_STATE_SAVE, topLoc);
+- fRXPat->fCompiledPat->addElement(saveStateOp, *fStatus);
++ appendOp(URX_STATE_SAVE, topLoc);
+ }
+ break;
+@@ -872,5 +832,5 @@
+ {
+ int32_t saveStateLoc = blockTopLoc(TRUE);
+- int32_t saveStateOp = URX_BUILD(URX_STATE_SAVE, fRXPat->fCompiledPat->size());
++ int32_t saveStateOp = buildOp(URX_STATE_SAVE, fRXPat->fCompiledPat->size());
+ fRXPat->fCompiledPat->setElementAt(saveStateOp, saveStateLoc);
+ }
+@@ -891,12 +851,10 @@
+ int32_t jmp2_loc = fRXPat->fCompiledPat->size();
+
+- int32_t jmp1_op = URX_BUILD(URX_JMP, jmp2_loc+1);
++ int32_t jmp1_op = buildOp(URX_JMP, jmp2_loc+1);
+ fRXPat->fCompiledPat->setElementAt(jmp1_op, jmp1_loc);
+
+- int32_t jmp2_op = URX_BUILD(URX_JMP, jmp2_loc+2);
+- fRXPat->fCompiledPat->addElement(jmp2_op, *fStatus);
+-
+- int32_t save_op = URX_BUILD(URX_STATE_SAVE, jmp1_loc+1);
+- fRXPat->fCompiledPat->addElement(save_op, *fStatus);
++ appendOp(URX_JMP, jmp2_loc+2);
++
++ appendOp(URX_STATE_SAVE, jmp1_loc+1);
+ }
+ break;
+@@ -938,10 +896,8 @@
+ if (URX_TYPE(repeatedOp) == URX_SETREF) {
+ // Emit optimized code for a [char set]*
+- int32_t loopOpI = URX_BUILD(URX_LOOP_SR_I, URX_VAL(repeatedOp));
++ int32_t loopOpI = buildOp(URX_LOOP_SR_I, URX_VAL(repeatedOp));
+ fRXPat->fCompiledPat->setElementAt(loopOpI, topLoc);
+- dataLoc = fRXPat->fFrameSize;
+- fRXPat->fFrameSize++;
+- int32_t loopOpC = URX_BUILD(URX_LOOP_C, dataLoc);
+- fRXPat->fCompiledPat->addElement(loopOpC, *fStatus);
++ dataLoc = allocateStackData(1);
++ appendOp(URX_LOOP_C, dataLoc);
+ break;
+ }
+@@ -951,5 +907,5 @@
+ URX_TYPE(repeatedOp) == URX_DOTANY_UNIX) {
+ // Emit Optimized code for .* operations.
+- int32_t loopOpI = URX_BUILD(URX_LOOP_DOT_I, 0);
++ int32_t loopOpI = buildOp(URX_LOOP_DOT_I, 0);
+ if (URX_TYPE(repeatedOp) == URX_DOTANY_ALL) {
+ // URX_LOOP_DOT_I operand is a flag indicating . matches any mode.
+@@ -960,8 +916,6 @@
+ }
+ fRXPat->fCompiledPat->setElementAt(loopOpI, topLoc);
+- dataLoc = fRXPat->fFrameSize;
+- fRXPat->fFrameSize++;
+- int32_t loopOpC = URX_BUILD(URX_LOOP_C, dataLoc);
+- fRXPat->fCompiledPat->addElement(loopOpC, *fStatus);
++ dataLoc = allocateStackData(1);
++ appendOp(URX_LOOP_C, dataLoc);
+ break;
+ }
+@@ -972,5 +926,5 @@
+
+ int32_t saveStateLoc = blockTopLoc(TRUE);
+- int32_t jmpOp = URX_BUILD(URX_JMP_SAV, saveStateLoc+1);
++ int32_t jmpOp = buildOp(URX_JMP_SAV, saveStateLoc+1);
+
+ // Check for minimum match length of zero, which requires
+@@ -978,10 +932,9 @@
+ if (minMatchLength(saveStateLoc, fRXPat->fCompiledPat->size()-1) == 0) {
+ insertOp(saveStateLoc);
+- dataLoc = fRXPat->fFrameSize;
+- fRXPat->fFrameSize++;
+-
+- int32_t op = URX_BUILD(URX_STO_INP_LOC, dataLoc);
++ dataLoc = allocateStackData(1);
++
++ int32_t op = buildOp(URX_STO_INP_LOC, dataLoc);
+ fRXPat->fCompiledPat->setElementAt(op, saveStateLoc+1);
+- jmpOp = URX_BUILD(URX_JMP_SAV_X, saveStateLoc+2);
++ jmpOp = buildOp(URX_JMP_SAV_X, saveStateLoc+2);
+ }
+
+@@ -990,10 +943,10 @@
+ int32_t continueLoc = fRXPat->fCompiledPat->size()+1;
+
+- // Put together the save state op store it into the compiled code.
+- int32_t saveStateOp = URX_BUILD(URX_STATE_SAVE, continueLoc);
++ // Put together the save state op and store it into the compiled code.
++ int32_t saveStateOp = buildOp(URX_STATE_SAVE, continueLoc);
+ fRXPat->fCompiledPat->setElementAt(saveStateOp, saveStateLoc);
+
+ // Append the URX_JMP_SAV or URX_JMPX operation to the compiled pattern.
+- fRXPat->fCompiledPat->addElement(jmpOp, *fStatus);
++ appendOp(jmpOp);
+ }
+ break;
+@@ -1009,8 +962,7 @@
+ int32_t jmpLoc = blockTopLoc(TRUE); // loc 1.
+ int32_t saveLoc = fRXPat->fCompiledPat->size(); // loc 3.
+- int32_t jmpOp = URX_BUILD(URX_JMP, saveLoc);
+- int32_t stateSaveOp = URX_BUILD(URX_STATE_SAVE, jmpLoc+1);
++ int32_t jmpOp = buildOp(URX_JMP, saveLoc);
+ fRXPat->fCompiledPat->setElementAt(jmpOp, jmpLoc);
+- fRXPat->fCompiledPat->addElement(stateSaveOp, *fStatus);
++ appendOp(URX_STATE_SAVE, jmpLoc+1);
+ }
+ break;
+@@ -1085,7 +1037,7 @@
+ // First the STO_SP before the start of the loop
+ insertOp(topLoc);
+- int32_t varLoc = fRXPat->fDataSize; // Reserve a data location for saving the
+- fRXPat->fDataSize += 1; // state stack ptr.
+- int32_t op = URX_BUILD(URX_STO_SP, varLoc);
++
++ int32_t varLoc = allocateData(1); // Reserve a data location for saving the
++ int32_t op = buildOp(URX_STO_SP, varLoc);
+ fRXPat->fCompiledPat->setElementAt(op, topLoc);
+
+@@ -1096,6 +1048,5 @@
+
+ // Then the LD_SP after the end of the loop
+- op = URX_BUILD(URX_LD_SP, varLoc);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_LD_SP, varLoc);
+ }
+
+@@ -1133,13 +1084,11 @@
+ {
+ fixLiterals(FALSE);
+- int32_t op;
+ if (fModeFlags & UREGEX_DOTALL) {
+- op = URX_BUILD(URX_DOTANY_ALL, 0);
++ appendOp(URX_DOTANY_ALL, 0);
+ } else if (fModeFlags & UREGEX_UNIX_LINES) {
+- op = URX_BUILD(URX_DOTANY_UNIX, 0);
++ appendOp(URX_DOTANY_UNIX, 0);
+ } else {
+- op = URX_BUILD(URX_DOTANY, 0);
+- }
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_DOTANY, 0);
++ }
+ }
+ break;
+@@ -1148,15 +1097,13 @@
+ {
+ fixLiterals(FALSE);
+- int32_t op = 0;
+ if ( (fModeFlags & UREGEX_MULTILINE) == 0 && (fModeFlags & UREGEX_UNIX_LINES) == 0) {
+- op = URX_CARET;
++ appendOp(URX_CARET, 0);
+ } else if ((fModeFlags & UREGEX_MULTILINE) != 0 && (fModeFlags & UREGEX_UNIX_LINES) == 0) {
+- op = URX_CARET_M;
++ appendOp(URX_CARET_M, 0);
+ } else if ((fModeFlags & UREGEX_MULTILINE) == 0 && (fModeFlags & UREGEX_UNIX_LINES) != 0) {
+- op = URX_CARET; // Only testing true start of input.
++ appendOp(URX_CARET, 0); // Only testing true start of input.
+ } else if ((fModeFlags & UREGEX_MULTILINE) != 0 && (fModeFlags & UREGEX_UNIX_LINES) != 0) {
+- op = URX_CARET_M_UNIX;
+- }
+- fRXPat->fCompiledPat->addElement(URX_BUILD(op, 0), *fStatus);
++ appendOp(URX_CARET_M_UNIX, 0);
++ }
+ }
+ break;
+@@ -1165,15 +1112,13 @@
+ {
+ fixLiterals(FALSE);
+- int32_t op = 0;
+ if ( (fModeFlags & UREGEX_MULTILINE) == 0 && (fModeFlags & UREGEX_UNIX_LINES) == 0) {
+- op = URX_DOLLAR;
++ appendOp(URX_DOLLAR, 0);
+ } else if ((fModeFlags & UREGEX_MULTILINE) != 0 && (fModeFlags & UREGEX_UNIX_LINES) == 0) {
+- op = URX_DOLLAR_M;
++ appendOp(URX_DOLLAR_M, 0);
+ } else if ((fModeFlags & UREGEX_MULTILINE) == 0 && (fModeFlags & UREGEX_UNIX_LINES) != 0) {
+- op = URX_DOLLAR_D;
++ appendOp(URX_DOLLAR_D, 0);
+ } else if ((fModeFlags & UREGEX_MULTILINE) != 0 && (fModeFlags & UREGEX_UNIX_LINES) != 0) {
+- op = URX_DOLLAR_MD;
+- }
+- fRXPat->fCompiledPat->addElement(URX_BUILD(op, 0), *fStatus);
++ appendOp(URX_DOLLAR_MD, 0);
++ }
+ }
+ break;
+@@ -1181,5 +1126,5 @@
+ case doBackslashA:
+ fixLiterals(FALSE);
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_CARET, 0), *fStatus);
++ appendOp(URX_CARET, 0);
+ break;
+
+@@ -1193,5 +1138,5 @@
+ fixLiterals(FALSE);
+ int32_t op = (fModeFlags & UREGEX_UWORD)? URX_BACKSLASH_BU : URX_BACKSLASH_B;
+- fRXPat->fCompiledPat->addElement(URX_BUILD(op, 1), *fStatus);
++ appendOp(op, 1);
+ }
+ break;
+@@ -1206,5 +1151,5 @@
+ fixLiterals(FALSE);
+ int32_t op = (fModeFlags & UREGEX_UWORD)? URX_BACKSLASH_BU : URX_BACKSLASH_B;
+- fRXPat->fCompiledPat->addElement(URX_BUILD(op, 0), *fStatus);
++ appendOp(op, 0);
+ }
+ break;
+@@ -1212,44 +1157,40 @@
+ case doBackslashD:
+ fixLiterals(FALSE);
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_BACKSLASH_D, 1), *fStatus);
++ appendOp(URX_BACKSLASH_D, 1);
+ break;
+
+ case doBackslashd:
+ fixLiterals(FALSE);
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_BACKSLASH_D, 0), *fStatus);
++ appendOp(URX_BACKSLASH_D, 0);
+ break;
+
+ case doBackslashG:
+ fixLiterals(FALSE);
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_BACKSLASH_G, 0), *fStatus);
++ appendOp(URX_BACKSLASH_G, 0);
+ break;
+
+ case doBackslashS:
+ fixLiterals(FALSE);
+- fRXPat->fCompiledPat->addElement(
+- URX_BUILD(URX_STAT_SETREF_N, URX_ISSPACE_SET), *fStatus);
++ appendOp(URX_STAT_SETREF_N, URX_ISSPACE_SET);
+ break;
+
+ case doBackslashs:
+ fixLiterals(FALSE);
+- fRXPat->fCompiledPat->addElement(
+- URX_BUILD(URX_STATIC_SETREF, URX_ISSPACE_SET), *fStatus);
++ appendOp(URX_STATIC_SETREF, URX_ISSPACE_SET);
+ break;
+
+ case doBackslashW:
+ fixLiterals(FALSE);
+- fRXPat->fCompiledPat->addElement(
+- URX_BUILD(URX_STAT_SETREF_N, URX_ISWORD_SET), *fStatus);
++ appendOp(URX_STAT_SETREF_N, URX_ISWORD_SET);
+ break;
+
+ case doBackslashw:
+ fixLiterals(FALSE);
+- fRXPat->fCompiledPat->addElement(
+- URX_BUILD(URX_STATIC_SETREF, URX_ISWORD_SET), *fStatus);
++ appendOp(URX_STATIC_SETREF, URX_ISWORD_SET);
+ break;
+
+ case doBackslashX:
+ fixLiterals(FALSE);
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_BACKSLASH_X, 0), *fStatus);
++ appendOp(URX_BACKSLASH_X, 0);
+ break;
+
+@@ -1257,10 +1198,10 @@
+ case doBackslashZ:
+ fixLiterals(FALSE);
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_DOLLAR, 0), *fStatus);
++ appendOp(URX_DOLLAR, 0);
+ break;
+
+ case doBackslashz:
+ fixLiterals(FALSE);
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_BACKSLASH_Z, 0), *fStatus);
++ appendOp(URX_BACKSLASH_Z, 0);
+ break;
+
+@@ -1322,11 +1263,9 @@
+ // and shouldn't enter this code path at all.
+ fixLiterals(FALSE);
+- int32_t op;
+ if (fModeFlags & UREGEX_CASE_INSENSITIVE) {
+- op = URX_BUILD(URX_BACKREF_I, groupNum);
++ appendOp(URX_BACKREF_I, groupNum);
+ } else {
+- op = URX_BUILD(URX_BACKREF, groupNum);
+- }
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_BACKREF, groupNum);
++ }
+ }
+ break;
+@@ -1349,20 +1288,16 @@
+ // Emit the STO_SP
+ int32_t topLoc = blockTopLoc(TRUE);
+- int32_t stoLoc = fRXPat->fDataSize;
+- fRXPat->fDataSize++; // Reserve the data location for storing save stack ptr.
+- int32_t op = URX_BUILD(URX_STO_SP, stoLoc);
++ int32_t stoLoc = allocateData(1); // Reserve the data location for storing save stack ptr.
++ int32_t op = buildOp(URX_STO_SP, stoLoc);
+ fRXPat->fCompiledPat->setElementAt(op, topLoc);
+
+ // Emit the STATE_SAVE
+- op = URX_BUILD(URX_STATE_SAVE, fRXPat->fCompiledPat->size()+2);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_STATE_SAVE, fRXPat->fCompiledPat->size()+2);
+
+ // Emit the JMP
+- op = URX_BUILD(URX_JMP, topLoc+1);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_JMP, topLoc+1);
+
+ // Emit the LD_SP
+- op = URX_BUILD(URX_LD_SP, stoLoc);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_LD_SP, stoLoc);
+ }
+ break;
+@@ -1384,21 +1319,18 @@
+
+ // emit STO_SP loc
+- int32_t stoLoc = fRXPat->fDataSize;
+- fRXPat->fDataSize++; // Reserve the data location for storing save stack ptr.
+- int32_t op = URX_BUILD(URX_STO_SP, stoLoc);
++ int32_t stoLoc = allocateData(1); // Reserve the data location for storing save stack ptr.
++ int32_t op = buildOp(URX_STO_SP, stoLoc);
+ fRXPat->fCompiledPat->setElementAt(op, topLoc);
+
+ // Emit the SAVE_STATE 5
+ int32_t L7 = fRXPat->fCompiledPat->size()+1;
+- op = URX_BUILD(URX_STATE_SAVE, L7);
++ op = buildOp(URX_STATE_SAVE, L7);
+ fRXPat->fCompiledPat->setElementAt(op, topLoc+1);
+
+ // Append the JMP operation.
+- op = URX_BUILD(URX_JMP, topLoc+1);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_JMP, topLoc+1);
+
+ // Emit the LD_SP loc
+- op = URX_BUILD(URX_LD_SP, stoLoc);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_LD_SP, stoLoc);
+ }
+ break;
+@@ -1419,17 +1351,15 @@
+
+ // Emit the STO_SP
+- int32_t stoLoc = fRXPat->fDataSize;
+- fRXPat->fDataSize++; // Reserve the data location for storing save stack ptr.
+- int32_t op = URX_BUILD(URX_STO_SP, stoLoc);
++ int32_t stoLoc = allocateData(1); // Reserve the data location for storing save stack ptr.
++ int32_t op = buildOp(URX_STO_SP, stoLoc);
+ fRXPat->fCompiledPat->setElementAt(op, topLoc);
+
+ // Emit the SAVE_STATE
+ int32_t continueLoc = fRXPat->fCompiledPat->size()+1;
+- op = URX_BUILD(URX_STATE_SAVE, continueLoc);
++ op = buildOp(URX_STATE_SAVE, continueLoc);
+ fRXPat->fCompiledPat->setElementAt(op, topLoc+1);
+
+ // Emit the LD_SP
+- op = URX_BUILD(URX_LD_SP, stoLoc);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_LD_SP, stoLoc);
+ }
+ break;
+@@ -1488,6 +1418,6 @@
+ {
+ fixLiterals(FALSE);
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_NOP, 0), *fStatus);
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_NOP, 0), *fStatus);
++ appendOp(URX_NOP, 0);
++ appendOp(URX_NOP, 0);
+
+ // On the Parentheses stack, start a new frame and add the postions
+@@ -1826,5 +1756,4 @@
+ //------------------------------------------------------------------------------
+ void RegexCompile::fixLiterals(UBool split) {
+- int32_t op = 0; // An op from/for the compiled pattern.
+
+ // If no literal characters have been scanned but not yet had code generated
+@@ -1865,21 +1794,21 @@
+ if ((fModeFlags & UREGEX_CASE_INSENSITIVE) &&
+ u_hasBinaryProperty(lastCodePoint, UCHAR_CASE_SENSITIVE)) {
+- op = URX_BUILD(URX_ONECHAR_I, lastCodePoint);
++ appendOp(URX_ONECHAR_I, lastCodePoint);
+ } else {
+- op = URX_BUILD(URX_ONECHAR, lastCodePoint);
+- }
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_ONECHAR, lastCodePoint);
++ }
+ } else {
+ // Two or more chars, emit a URX_STRING to match them.
++ if (fLiteralChars.length() > 0x00ffffff || fRXPat->fLiteralText.length() > 0x00ffffff) {
++ error(U_REGEX_PATTERN_TOO_BIG);
++ }
+ if (fModeFlags & UREGEX_CASE_INSENSITIVE) {
+- op = URX_BUILD(URX_STRING_I, fRXPat->fLiteralText.length());
++ appendOp(URX_STRING_I, fRXPat->fLiteralText.length());
+ } else {
+ // TODO here: add optimization to split case sensitive strings of length two
+ // into two single char ops, for efficiency.
+- op = URX_BUILD(URX_STRING, fRXPat->fLiteralText.length());
+- }
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
+- op = URX_BUILD(URX_STRING_LEN, fLiteralChars.length());
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_STRING, fRXPat->fLiteralText.length());
++ }
++ appendOp(URX_STRING_LEN, fLiteralChars.length());
+
+ // Add this string into the accumulated strings of the compiled pattern.
+@@ -1891,6 +1820,56 @@
+
+
+-
+-
++int32_t RegexCompile::buildOp(int32_t type, int32_t val) {
++ if (U_FAILURE(*fStatus)) {
++ return 0;
++ }
++ if (type < 0 || type > 255) {
++ U_ASSERT(FALSE);
++ error(U_REGEX_INTERNAL_ERROR);
++ type = URX_RESERVED_OP;
++ }
++ if (val > 0x00ffffff) {
++ U_ASSERT(FALSE);
++ error(U_REGEX_INTERNAL_ERROR);
++ val = 0;
++ }
++ if (val < 0) {
++ if (!(type == URX_RESERVED_OP_N || type == URX_RESERVED_OP)) {
++ U_ASSERT(FALSE);
++ error(U_REGEX_INTERNAL_ERROR);
++ return -1;
++ }
++ if (URX_TYPE(val) != 0xff) {
++ U_ASSERT(FALSE);
++ error(U_REGEX_INTERNAL_ERROR);
++ return -1;
++ }
++ type = URX_RESERVED_OP_N;
++ }
++ return (type << 24) | val;
++}
++
++
++//------------------------------------------------------------------------------
++//
++// appendOp() Append a new instruction onto the compiled pattern
++// Includes error checking, limiting the size of the
++// pattern to lengths that can be represented in the
++// 24 bit operand field of an instruction.
++//
++//------------------------------------------------------------------------------
++void RegexCompile::appendOp(int32_t op) {
++ if (U_FAILURE(*fStatus)) {
++ return;
++ }
++ fRXPat->fCompiledPat->addElement(op, *fStatus);
++ if ((fRXPat->fCompiledPat->size() > 0x00fffff0) && U_SUCCESS(*fStatus)) {
++ error(U_REGEX_PATTERN_TOO_BIG);
++ }
++}
++
++void RegexCompile::appendOp(int32_t type, int32_t val) {
++ appendOp(buildOp(type, val));
++}
+
+
+@@ -1908,5 +1887,5 @@
+ U_ASSERT(where>0 && where < code->size());
+
+- int32_t nop = URX_BUILD(URX_NOP, 0);
++ int32_t nop = buildOp(URX_NOP, 0);
+ code->insertElementAt(nop, where, *fStatus);
+
+@@ -1929,5 +1908,5 @@
+ // needs to be incremented to adjust for the insertion.
+ opValue++;
+- op = URX_BUILD(opType, opValue);
++ op = buildOp(opType, opValue);
+ code->setElementAt(op, loc);
+ }
+@@ -1953,4 +1932,56 @@
+ }
+
++
++//------------------------------------------------------------------------------
++//
++// allocateData() Allocate storage in the matcher's static data area.
++// Return the index for the newly allocated data.
++// The storage won't actually exist until we are running a match
++// operation, but the storage indexes are inserted into various
++// opcodes while compiling the pattern.
++//
++//------------------------------------------------------------------------------
++int32_t RegexCompile::allocateData(int32_t size) {
++ if (U_FAILURE(*fStatus)) {
++ return 0;
++ }
++ if (size <= 0 || size > 0x100 || fRXPat->fDataSize < 0) {
++ error(U_REGEX_INTERNAL_ERROR);
++ return 0;
++ }
++ int32_t dataIndex = fRXPat->fDataSize;
++ fRXPat->fDataSize += size;
++ if (fRXPat->fDataSize >= 0x00fffff0) {
++ error(U_REGEX_INTERNAL_ERROR);
++ }
++ return dataIndex;
++}
++
++
++//------------------------------------------------------------------------------
++//
++// allocateStackData() Allocate space in the back-tracking stack frame.
++// Return the index for the newly allocated data.
++// The frame indexes are inserted into various
++// opcodes while compiling the pattern, meaning that frame
++// size must be restricted to the size that will fit
++// as an operand (24 bits).
++//
++//------------------------------------------------------------------------------
++int32_t RegexCompile::allocateStackData(int32_t size) {
++ if (U_FAILURE(*fStatus)) {
++ return 0;
++ }
++ if (size <= 0 || size > 0x100 || fRXPat->fFrameSize < 0) {
++ error(U_REGEX_INTERNAL_ERROR);
++ return 0;
++ }
++ int32_t dataIndex = fRXPat->fFrameSize;
++ fRXPat->fFrameSize += size;
++ if (fRXPat->fFrameSize >= 0x00fffff0) {
++ error(U_REGEX_PATTERN_TOO_BIG);
++ }
++ return dataIndex;
++}
+
+
+@@ -1996,5 +2027,5 @@
+ }
+ if (reserveLoc) {
+- int32_t nop = URX_BUILD(URX_NOP, 0);
++ int32_t nop = buildOp(URX_NOP, 0);
+ fRXPat->fCompiledPat->insertElementAt(nop, theLoc, *fStatus);
+ }
+@@ -2071,6 +2102,5 @@
+
+ int32_t frameVarLocation = URX_VAL(captureOp);
+- int32_t endCaptureOp = URX_BUILD(URX_END_CAPTURE, frameVarLocation);
+- fRXPat->fCompiledPat->addElement(endCaptureOp, *fStatus);
++ appendOp(URX_END_CAPTURE, frameVarLocation);
+ }
+ break;
+@@ -2083,6 +2113,5 @@
+ U_ASSERT(URX_TYPE(stoOp) == URX_STO_SP);
+ int32_t stoLoc = URX_VAL(stoOp);
+- int32_t ldOp = URX_BUILD(URX_LD_SP, stoLoc);
+- fRXPat->fCompiledPat->addElement(ldOp, *fStatus);
++ appendOp(URX_LD_SP, stoLoc);
+ }
+ break;
+@@ -2093,6 +2122,5 @@
+ U_ASSERT(URX_TYPE(startOp) == URX_LA_START);
+ int32_t dataLoc = URX_VAL(startOp);
+- int32_t op = URX_BUILD(URX_LA_END, dataLoc);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_LA_END, dataLoc);
+ }
+ break;
+@@ -2104,10 +2132,7 @@
+ U_ASSERT(URX_TYPE(startOp) == URX_LA_START);
+ int32_t dataLoc = URX_VAL(startOp);
+- int32_t op = URX_BUILD(URX_LA_END, dataLoc);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
+- op = URX_BUILD(URX_BACKTRACK, 0);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
+- op = URX_BUILD(URX_LA_END, dataLoc);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_LA_END, dataLoc);
++ appendOp(URX_BACKTRACK, 0);
++ appendOp(URX_LA_END, dataLoc);
+
+ // Patch the URX_SAVE near the top of the block.
+@@ -2116,5 +2141,5 @@
+ U_ASSERT(URX_TYPE(saveOp) == URX_STATE_SAVE);
+ int32_t dest = fRXPat->fCompiledPat->size()-1;
+- saveOp = URX_BUILD(URX_STATE_SAVE, dest);
++ saveOp = buildOp(URX_STATE_SAVE, dest);
+ fRXPat->fCompiledPat->setElementAt(saveOp, fMatchOpenParen);
+ }
+@@ -2129,8 +2154,6 @@
+ U_ASSERT(URX_TYPE(startOp) == URX_LB_START);
+ int32_t dataLoc = URX_VAL(startOp);
+- int32_t op = URX_BUILD(URX_LB_END, dataLoc);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
+- op = URX_BUILD(URX_LA_END, dataLoc);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_LB_END, dataLoc);
++ appendOp(URX_LA_END, dataLoc);
+
+ // Determine the min and max bounds for the length of the
+@@ -2168,6 +2191,5 @@
+ U_ASSERT(URX_TYPE(startOp) == URX_LB_START);
+ int32_t dataLoc = URX_VAL(startOp);
+- int32_t op = URX_BUILD(URX_LBN_END, dataLoc);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(URX_LBN_END, dataLoc);
+
+ // Determine the min and max bounds for the length of the
+@@ -2194,5 +2216,5 @@
+ // Insert the pattern location to continue at after a successful match
+ // as the last operand of the URX_LBN_CONT
+- op = URX_BUILD(URX_RELOC_OPRND, fRXPat->fCompiledPat->size());
++ int32_t op = buildOp(URX_RELOC_OPRND, fRXPat->fCompiledPat->size());
+ fRXPat->fCompiledPat->setElementAt(op, fMatchOpenParen-1);
+ }
+@@ -2235,5 +2257,5 @@
+ {
+ // Set of no elements. Always fails to match.
+- fRXPat->fCompiledPat->addElement(URX_BUILD(URX_BACKTRACK, 0), *fStatus);
++ appendOp(URX_BACKTRACK, 0);
+ delete theSet;
+ }
+@@ -2256,6 +2278,5 @@
+ int32_t setNumber = fRXPat->fSets->size();
+ fRXPat->fSets->addElement(theSet, *fStatus);
+- int32_t setOp = URX_BUILD(URX_SETREF, setNumber);
+- fRXPat->fCompiledPat->addElement(setOp, *fStatus);
++ appendOp(URX_SETREF, setNumber);
+ }
+ }
+@@ -2296,11 +2317,8 @@
+ // +1 --> Input index (for breaking non-progressing loops)
+ // (Only present if unbounded upper limit on loop)
+- int32_t counterLoc = fRXPat->fFrameSize;
+- fRXPat->fFrameSize++;
+- if (fIntervalUpper < 0) {
+- fRXPat->fFrameSize++;
+- }
+-
+- int32_t op = URX_BUILD(InitOp, counterLoc);
++ int32_t dataSize = fIntervalUpper < 0 ? 2 : 1;
++ int32_t counterLoc = allocateStackData(dataSize);
++
++ int32_t op = buildOp(InitOp, counterLoc);
+ fRXPat->fCompiledPat->setElementAt(op, topOfBlock);
+
+@@ -2310,5 +2328,5 @@
+ // position to move.
+ int32_t loopEnd = fRXPat->fCompiledPat->size();
+- op = URX_BUILD(URX_RELOC_OPRND, loopEnd);
++ op = buildOp(URX_RELOC_OPRND, loopEnd);
+ fRXPat->fCompiledPat->setElementAt(op, topOfBlock+1);
+
+@@ -2319,6 +2337,5 @@
+ // Apend the CTR_LOOP op. The operand is the location of the CTR_INIT op.
+ // Goes at end of the block being looped over, so just append to the code so far.
+- op = URX_BUILD(LoopOp, topOfBlock);
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ appendOp(LoopOp, topOfBlock);
+
+ if ((fIntervalLow & 0xff000000) != 0 ||
+@@ -2373,5 +2390,5 @@
+ int32_t endOfSequenceLoc = fRXPat->fCompiledPat->size()-1
+ + fIntervalUpper + (fIntervalUpper-fIntervalLow);
+- int32_t saveOp = URX_BUILD(URX_STATE_SAVE, endOfSequenceLoc);
++ int32_t saveOp = buildOp(URX_STATE_SAVE, endOfSequenceLoc);
+ if (fIntervalLow == 0) {
+ insertOp(topOfBlock);
+@@ -2386,11 +2403,8 @@
+ int32_t i;
+ for (i=1; i<fIntervalUpper; i++ ) {
+- if (i == fIntervalLow) {
+- fRXPat->fCompiledPat->addElement(saveOp, *fStatus);
+- }
+- if (i > fIntervalLow) {
+- fRXPat->fCompiledPat->addElement(saveOp, *fStatus);
+- }
+- fRXPat->fCompiledPat->addElement(op, *fStatus);
++ if (i >= fIntervalLow) {
++ appendOp(saveOp);
++ }
++ appendOp(op);
+ }
+ return TRUE;
+@@ -3612,5 +3626,5 @@
+ U_ASSERT(operandAddress>=0 && operandAddress<deltas.size());
+ int32_t fixedOperandAddress = operandAddress - deltas.elementAti(operandAddress);
+- op = URX_BUILD(opType, fixedOperandAddress);
++ op = buildOp(opType, fixedOperandAddress);
+ fRXPat->fCompiledPat->setElementAt(op, dst);
+ dst++;
+@@ -3627,5 +3641,5 @@
+ }
+ where = fRXPat->fGroupMap->elementAti(where-1);
+- op = URX_BUILD(opType, where);
++ op = buildOp(opType, where);
+ fRXPat->fCompiledPat->setElementAt(op, dst);
+ dst++;
+@@ -3979,5 +3993,5 @@
+ //
+ // scanNamedChar
+- // Get a UChar32 from a \N{UNICODE CHARACTER NAME} in the pattern.
++// Get a UChar32 from a \N{UNICODE CHARACTER NAME} in the pattern.
+ //
+ // The scan position will be at the 'N'. On return
+Index: /icu/trunk/source/i18n/regexcmp.h
+===================================================================
+--- /icu/trunk/source/i18n/regexcmp.h (revision 36800)
++++ /icu/trunk/source/i18n/regexcmp.h (revision 36801)
+@@ -105,4 +105,11 @@
+ void insertOp(int32_t where); // Open up a slot for a new op in the
+ // generated code at the specified location.
++ void appendOp(int32_t op); // Append a new op to the compiled pattern.
++ void appendOp(int32_t type, int32_t val); // Build & append a new op to the compiled pattern.
++ int32_t buildOp(int32_t type, int32_t val); // Construct a new pcode instruction.
++ int32_t allocateData(int32_t size); // Allocate space in the matcher data area.
++ // Return index of the newly allocated data.
++ int32_t allocateStackData(int32_t size); // Allocate space in the match back-track stack frame.
++ // Return offset index in the frame.
+ int32_t minMatchLength(int32_t start,
+ int32_t end);
+Index: /icu/trunk/source/i18n/regeximp.h
+===================================================================
+--- /icu/trunk/source/i18n/regeximp.h (revision 36800)
++++ /icu/trunk/source/i18n/regeximp.h (revision 36801)
+@@ -1,4 +1,4 @@
+ //
+-// Copyright (C) 2002-2013 International Business Machines Corporation
++// Copyright (C) 2002-2014 International Business Machines Corporation
+ // and others. All rights reserved.
+ //
+@@ -242,5 +242,4 @@
+ // Convenience macros for assembling and disassembling a compiled operation.
+ //
+-#define URX_BUILD(type, val) (int32_t)((type << 24) | (val))
+ #define URX_TYPE(x) ((uint32_t)(x) >> 24)
+ #define URX_VAL(x) ((x) & 0xffffff)
+Index: /icu/trunk/source/test/intltest/regextst.cpp
+===================================================================
+--- /icu/trunk/source/test/intltest/regextst.cpp (revision 36800)
++++ /icu/trunk/source/test/intltest/regextst.cpp (revision 36801)
+@@ -145,4 +145,7 @@
+ if (exec) TestBug11049();
+ break;
++ case 25: name = "TestBug11371";
++ if (exec) TestBug11371();
++ break;
+ default: name = "";
+ break; //needed to end loop
+@@ -5368,4 +5371,47 @@
+
+
++void RegexTest::TestBug11371() {
++ if (quick) {
++ logln("Skipping test. Runs in exhuastive mode only.");
++ return;
++ }
++ UErrorCode status = U_ZERO_ERROR;
++ UnicodeString patternString;
++
++ for (int i=0; i<8000000; i++) {
++ patternString.append(UnicodeString("()"));
++ }
++ LocalPointer<RegexPattern> compiledPat(RegexPattern::compile(patternString, 0, status));
++ if (status != U_REGEX_PATTERN_TOO_BIG) {
++ errln("File %s, line %d expected status=U_REGEX_PATTERN_TOO_BIG; got %s.",
++ __FILE__, __LINE__, u_errorName(status));
++ }
++
++ status = U_ZERO_ERROR;
++ patternString = "(";
++ for (int i=0; i<20000000; i++) {
++ patternString.append(UnicodeString("A++"));
++ }
++ patternString.append(UnicodeString("){0}B++"));
++ LocalPointer<RegexPattern> compiledPat2(RegexPattern::compile(patternString, 0, status));
++ if (status != U_REGEX_PATTERN_TOO_BIG) {
++ errln("File %s, line %d expected status=U_REGEX_PATTERN_TOO_BIG; got %s.",
++ __FILE__, __LINE__, u_errorName(status));
++ }
++
++ // Pattern with too much string data, such that string indexes overflow operand data field size
++ // in compiled instruction.
++ status = U_ZERO_ERROR;
++ patternString = "";
++ while (patternString.length() < 0x00ffffff) {
++ patternString.append(UnicodeString("stuff and things dont you know, these are a few of my favorite strings\n"));
++ }
++ patternString.append(UnicodeString("X? trailing string"));
++ LocalPointer<RegexPattern> compiledPat3(RegexPattern::compile(patternString, 0, status));
++ if (status != U_REGEX_PATTERN_TOO_BIG) {
++ errln("File %s, line %d expected status=U_REGEX_PATTERN_TOO_BIG; got %s.",
++ __FILE__, __LINE__, u_errorName(status));
++ }
++}
+
+ #endif /* !UCONFIG_NO_REGULAR_EXPRESSIONS */
+Index: /icu/trunk/source/test/intltest/regextst.h
+===================================================================
+--- /icu/trunk/source/test/intltest/regextst.h (revision 36800)
++++ /icu/trunk/source/test/intltest/regextst.h (revision 36801)
+@@ -51,4 +51,5 @@
+ virtual void TestCaseInsensitiveStarters();
+ virtual void TestBug11049();
++ virtual void TestBug11371();
+
+ // The following functions are internal to the regexp tests.
diff --git a/dev-libs/icu/files/icu-fix-tests-depending-on-date.patch b/dev-libs/icu/files/icu-fix-tests-depending-on-date.patch new file mode 100644 index 000000000000..61c286a54c10 --- /dev/null +++ b/dev-libs/icu/files/icu-fix-tests-depending-on-date.patch @@ -0,0 +1,15 @@ +See icu-fix-tests-depending-on-date.patch + +Index: icu/source/test/intltest/dtfmttst.cpp +=================================================================== +--- icu.orig/source/test/intltest/dtfmttst.cpp ++++ icu/source/test/intltest/dtfmttst.cpp +@@ -1132,7 +1132,7 @@ DateFormatTest::TestTwoDigitYear() + return; + } + parse2DigitYear(fmt, "5/6/17", date(117, UCAL_JUNE, 5)); +- parse2DigitYear(fmt, "4/6/34", date(34, UCAL_JUNE, 4)); ++ parse2DigitYear(fmt, "4/6/34", date(134, UCAL_JUNE, 4)); + } + + // ------------------------------------- diff --git a/dev-libs/icu/files/icu-remove-bashisms.patch b/dev-libs/icu/files/icu-remove-bashisms.patch new file mode 100644 index 000000000000..980d84b77d88 --- /dev/null +++ b/dev-libs/icu/files/icu-remove-bashisms.patch @@ -0,0 +1,230 @@ +Index: config/Makefile.inc.in +=================================================================== +--- config/Makefile.inc.in (revision 36912) ++++ config/Makefile.inc.in (working copy) +@@ -125,12 +125,6 @@ + # with usually. Many applications will want to add $(ICULIBS_I18N) as well. + ICULIBS = $(ICULIBS_BASE) $(ICULIBS_I18N) $(ICULIBS_COMMON) $(ICULIBS_DATA) + +-# Proper echo newline handling is needed in icu-config +-ECHO_N=@ICU_ECHO_N@ +-ECHO_C=@ICU_ECHO_C@ +-# Not currently being used but good to have for proper tab handling +-ECHO_T=@ICU_ECHO_T@ +- + ################################################################## + ################################################################## + # +Index: config/icu-config-bottom +=================================================================== +--- config/icu-config-bottom (revision 36912) ++++ config/icu-config-bottom (working copy) +@@ -217,73 +217,73 @@ + ;; + + --cflags) +- echo $ECHO_N "${CFLAGS} ${ECHO_C}" ++ printf "%s" "${CFLAGS} " + ;; + + --cc) +- echo $ECHO_N "${CC} ${ECHO_C}" ++ printf "%s" "${CC} " + ;; + + --cxx) +- echo $ECHO_N "${CXX} ${ECHO_C}" ++ printf "%s" "${CXX} " + ;; + + --cxxflags) +- echo $ECHO_N "${CXXFLAGS} ${ECHO_C}" ++ printf "%s" "${CXXFLAGS} " + ;; + + --cppflags) + # Don't echo the -I. - it's unneeded. +- echo $ECHO_N "${CPPFLAGS} ${ECHO_C}" | sed -e 's/-I. //' ++ printf "%s" "${CPPFLAGS} " | sed -e 's/-I. //' + ;; + + --cppflags-searchpath) +- echo $ECHO_N "-I${prefix}/include ${ECHO_C}" ++ printf "%s" "-I${prefix}/include " + ;; + + --cppflags-dynamic) +- echo $ECHO_N "${SHAREDLIBCPPFLAGS} ${ECHO_C}" ++ printf "%s" "${SHAREDLIBCPPFLAGS} " + ;; + + --cxxflags-dynamic) +- echo $ECHO_N "${SHAREDLIBCXXFLAGS} ${ECHO_C}" ++ printf "%s" "${SHAREDLIBCXXFLAGS} " + ;; + + --cflags-dynamic) +- echo $ECHO_N "${SHAREDLIBCFLAGS} ${ECHO_C}" ++ printf "%s" "${SHAREDLIBCFLAGS} " + ;; + + --ldflags-system) +- echo $ECHO_N "${LIBS} ${ECHO_C}" ++ printf "%s" "${LIBS} " + ;; + + --ldflags) +- echo $ECHO_N "${LDFLAGS} ${ICULIBS} ${ECHO_C}" ++ printf "%s" "${LDFLAGS} ${ICULIBS} " + # $RPATH_LDFLAGS + ;; + + --ldflags-libsonly) +- echo $ECHO_N "${ICULIBS_I18N} ${ICULIBS_COMMON} ${ICULIBS_DATA} ${ECHO_C}" ++ printf "%s" "${ICULIBS_I18N} ${ICULIBS_COMMON} ${ICULIBS_DATA} " + ;; + + --ldflags-icuio) +- echo $ECHO_N " ${ICULIBS_ICUIO} ${ECHO_C}" ++ printf "%s" " ${ICULIBS_ICUIO} " + ;; + + --ldflags-obsolete) +- echo $ECHO_N "${ICULIBS_OBSOLETE} ${ECHO_C}" ++ printf "%s" "${ICULIBS_OBSOLETE} " + ;; + + --ldflags-toolutil) +- echo $ECHO_N " ${ICULIBS_TOOLUTIL} ${ECHO_C}" ++ printf "%s" " ${ICULIBS_TOOLUTIL} " + ;; + + --ldflags-layout) +- echo $ECHO_N "${ICULIBS_LAYOUT} ${ICULIBS_LAYOUTEX} ${ECHO_C}" ++ printf "%s" "${ICULIBS_LAYOUT} ${ICULIBS_LAYOUTEX} " + ;; + + --ldflags-searchpath) +- echo $ECHO_N "-L${libdir} ${ECHO_C}" ++ printf "%s" "-L${libdir} " + ;; + + --detect-prefix) +@@ -319,47 +319,47 @@ + ;; + + --shared-datadir) +- echo $ECHO_N "${datadir} ${ECHO_C}" ++ printf "%s" "${datadir} " + ;; + + --incfile) +- echo $ECHO_N "${pkglibdir}/Makefile.inc ${ECHO_C}" ++ printf "%s" "${pkglibdir}/Makefile.inc " + ;; + + --incpkgdatafile) +- echo $ECHO_N "${pkglibdir}/pkgdata.inc ${ECHO_C}" ++ printf "%s" "${pkglibdir}/pkgdata.inc " + ;; + + --icudata) +- echo $ECHO_N "${ICUDATA_NAME} ${ECHO_C}" ++ printf "%s" "${ICUDATA_NAME} " + ;; + + --icudata-mode) +- echo $ECHO_N "${PKGDATA_MODE} ${ECHO_C}" ++ printf "%s" "${PKGDATA_MODE} " + ;; + + --icudata-install-dir) +- echo $ECHO_N "${ICUPKGDATA_DIR} ${ECHO_C}" ++ printf "%s" "${ICUPKGDATA_DIR} " + ;; + + --icudatadir) +- echo $ECHO_N "${ICUDATA_DIR} ${ECHO_C}" ++ printf "%s" "${ICUDATA_DIR} " + ;; + + --shlib-c) +- echo $ECHO_N "${SHLIB_c} ${ECHO_C}" ++ printf "%s" "${SHLIB_c} " + ;; + + --shlib-cc) +- echo $ECHO_N "${SHLIB_cc} ${ECHO_C}" ++ printf "%s" "${SHLIB_cc} " + ;; + + --version) +- echo $ECHO_N $VERSION ++ printf "%s" "$VERSION" + ;; + + --unicode-version) +- echo $ECHO_N $UNICODE_VERSION ++ printf "%s" "$UNICODE_VERSION" + ;; + + --host) +Index: configure.ac +=================================================================== +--- configure.ac (revision 36912) ++++ configure.ac (working copy) +@@ -19,24 +19,6 @@ + PACKAGE="icu" + AC_SUBST(PACKAGE) + +-# Use custom echo test for newline option +-# Current autoconf (2.65) gives incorrect echo newline option +-# for icu-config +-# This may be removed later - mow (June 17, 2010) +-ICU_ECHO_C= ICU_ECHO_N= ICU_ECHO_T= +-case `/bin/sh -c "echo -n x"` in +--n*) +- case `/bin/sh -c "echo 'x\c'"` in +- *c*) ICU_ECHO_T=' ';; # ECHO_T is single tab character. +- *) ICU_ECHO_C='\c';; +- esac;; +-*) +- ICU_ECHO_N='-n';; +-esac +-AC_SUBST(ICU_ECHO_N) +-AC_SUBST(ICU_ECHO_C) +-AC_SUBST(ICU_ECHO_T) +- + AC_MSG_CHECKING(for ICU version numbers) + + # Get the ICU version from uversion.h or other headers +Index: icudefs.mk.in +=================================================================== +--- icudefs.mk.in (revision 36912) ++++ icudefs.mk.in (working copy) +@@ -155,11 +155,6 @@ + ENABLE_STATIC = @ENABLE_STATIC@ + ENABLE_SHARED = @ENABLE_SHARED@ + +-# Echo w/o newline +- +-#ECHO_N = @ICU_ECHO_N@ +-#ECHO_C = @ICU_ECHO_C@ +- + # Commands to compile + COMPILE.c= $(CC) $(CPPFLAGS) $(DEFS) $(CFLAGS) -c + COMPILE.cc= $(CXX) $(CPPFLAGS) $(DEFS) $(CXXFLAGS) -c +Index: test/hdrtst/Makefile.in +=================================================================== +--- test/hdrtst/Makefile.in (revision 36912) ++++ test/hdrtst/Makefile.in (working copy) +@@ -33,9 +33,6 @@ + include $(shell icu-config --incfile) + DIRS=$(prefix)/include/unicode + LDIRS=$(prefix)/include/layout +-ECHO_T=@ECHO_T@ +-ECHO_C=@ECHO_C@ +-ECHO_N=@ECHO_N@ + + all: + @echo Please read this Makefile for more information. |