path: root/sys-cluster/heat/files/ocata-heat.conf.sample

[DEFAULT]

#
# From heat.api.middleware.ssl
#

# The HTTP Header that will be used to determine what the original request
# protocol scheme was, even if it was removed by an SSL terminator proxy.
# (string value)
# Deprecated group/name - [DEFAULT]/secure_proxy_ssl_header
#secure_proxy_ssl_header = X-Forwarded-Proto

#
# From heat.common.config
#

# Name of the engine node. This can be an opaque identifier. It is not
# necessarily a hostname, FQDN, or IP address. (string value)
#host = slaanesh

# List of directories to search for plug-ins. (list value)
#plugin_dirs = /usr/lib64/heat,/usr/lib/heat,/usr/local/lib/heat,/usr/local/lib64/heat

# The directory to search for environment files. (string value)
#environment_dir = /etc/heat/environment.d

# The directory to search for template files. (string value)
#template_dir = /etc/heat/templates

# Select deferred auth method, stored password or trusts. (string value)
# Allowed values: password, trusts
#deferred_auth_method = trusts

# Allow reauthentication on token expiry, such that long-running tasks may
# complete. Note this defeats the expiry of any provided user tokens. (string
# value)
# Allowed values: '', trusts
#reauthentication_auth_method =

# Gap, in seconds, to determine whether the given token is about to expire.
# (integer value)
#stale_token_duration = 30

# Subset of trustor roles to be delegated to heat. If left unset, all roles of
# a user will be delegated to heat when creating a stack. (list value)
#trusts_delegated_roles =

# Maximum resources allowed per top-level stack. -1 stands for unlimited.
# (integer value)
#max_resources_per_stack = 1000

# Maximum number of stacks any one tenant may have active at one time. (integer
# value)
#max_stacks_per_tenant = 100

# Number of times to retry to bring a resource to a non-error state. Set to 0
# to disable retries. (integer value)
#action_retry_limit = 5

# Number of times to retry when a client encounters an expected intermittent
# error. Set to 0 to disable retries. (integer value)
#client_retry_limit = 2

# Maximum length of a server name to be used in nova. (integer value)
# Maximum value: 53
#max_server_name_length = 53

# Number of times to check whether an interface has been attached or detached.
# (integer value)
# Minimum value: 1
#max_interface_check_attempts = 10

# Controls how many events will be pruned whenever a stack's events are purged.
# Set this lower to keep more events at the expense of more frequent purges.
# (integer value)
# Minimum value: 1
#event_purge_batch_size = 200

# Rough number of maximum events that will be available per stack. Actual
# number of events can be a bit higher since purge checks take place randomly
# 200/event_purge_batch_size percent of the time. Older events are deleted when
# events are purged. Set to 0 for unlimited events per stack. (integer value)
#max_events_per_stack = 1000

# Timeout in seconds for stack action (ie. create or update). (integer value)
#stack_action_timeout = 3600

# The amount of time in seconds after an error has occurred that tasks may
# continue to run before being cancelled. (integer value)
#error_wait_time = 240

# RPC timeout for the engine liveness check that is used for stack locking.
# (integer value)
#engine_life_check_timeout = 2

# Enable the legacy OS::Heat::CWLiteAlarm resource. (boolean value)
#enable_cloud_watch_lite = false

# Enable the preview Stack Abandon feature. (boolean value)
#enable_stack_abandon = false

# Enable the preview Stack Adopt feature. (boolean value)
#enable_stack_adopt = false

# Enables engine with convergence architecture. All stacks with this option
# will be created using convergence engine. (boolean value)
#convergence_engine = true

# On update, enables heat to collect existing resource properties from reality
# and converge to updated template. (boolean value)
#observe_on_update = false

# Template default for how the server should receive the metadata required for
# software configuration. POLL_SERVER_CFN will allow calls to the cfn API
# action DescribeStackResource authenticated with the provided keypair
# (requires enabled heat-api-cfn). POLL_SERVER_HEAT will allow calls to the
# Heat API resource-show using the provided keystone credentials (requires
# keystone v3 API, and configured stack_user_* config options). POLL_TEMP_URL
# will create and populate a Swift TempURL with metadata for polling (requires
# object-store endpoint which supports TempURL).ZAQAR_MESSAGE will create a
# dedicated zaqar queue and post the metadata for polling. (string value)
# Allowed values: POLL_SERVER_CFN, POLL_SERVER_HEAT, POLL_TEMP_URL, ZAQAR_MESSAGE
#default_software_config_transport = POLL_SERVER_CFN

# Template default for how the server should signal to heat with the deployment
# output values. CFN_SIGNAL will allow an HTTP POST to a CFN keypair signed URL
# (requires enabled heat-api-cfn). TEMP_URL_SIGNAL will create a Swift TempURL
# to be signaled via HTTP PUT (requires object-store endpoint which supports
# TempURL). HEAT_SIGNAL will allow calls to the Heat API resource-signal using
# the provided keystone credentials. ZAQAR_SIGNAL will create a dedicated zaqar
# queue to be signaled using the provided keystone credentials. (string value)
# Allowed values: CFN_SIGNAL, TEMP_URL_SIGNAL, HEAT_SIGNAL, ZAQAR_SIGNAL
#default_deployment_signal_transport = CFN_SIGNAL

# Template default for how the user_data should be formatted for the server.
# For HEAT_CFNTOOLS, the user_data is bundled as part of the heat-cfntools
# cloud-init boot configuration data. For RAW the user_data is passed to Nova
# unmodified. For SOFTWARE_CONFIG user_data is bundled as part of the software
# config data, and metadata is derived from any associated SoftwareDeployment
# resources. (string value)
# Allowed values: HEAT_CFNTOOLS, RAW, SOFTWARE_CONFIG
#default_user_data_format = HEAT_CFNTOOLS

# Stacks containing these tag names will be hidden. Multiple tags should be
# given in a comma-delimited list (eg. hidden_stack_tags=hide_me,me_too). (list
# value)
#hidden_stack_tags = data-processing-cluster

# Deprecated. (string value)
#onready = <None>

# When this feature is enabled, scheduler hints identifying the heat stack
# context of a server or volume resource are passed to the configured
# schedulers in nova and cinder, for creates done using heat resource types
# OS::Cinder::Volume, OS::Nova::Server, and AWS::EC2::Instance.
# heat_root_stack_id will be set to the id of the root stack of the resource,
# heat_stack_id will be set to the id of the resource's parent stack,
# heat_stack_name will be set to the name of the resource's parent stack,
# heat_path_in_stack will be set to a list of comma delimited strings of
# stackresourcename and stackname with list[0] being 'rootstackname',
# heat_resource_name will be set to the resource's name, and heat_resource_uuid
# will be set to the resource's orchestration id. (boolean value)
#stack_scheduler_hints = false

# Encrypt template parameters that were marked as hidden and also all the
# resource properties before storing them in database. (boolean value)
#encrypt_parameters_and_properties = false

# Seconds between running periodic tasks. (integer value)
#periodic_interval = 60

# URL of the Heat metadata server. NOTE: Setting this is only needed if you
# require instances to use a different endpoint than in the keystone catalog
# (string value)
#heat_metadata_server_url = <None>

# URL of the Heat waitcondition server. (string value)
#heat_waitcondition_server_url = <None>

# URL of the Heat CloudWatch server. (string value)
#heat_watch_server_url =

# Instance connection to CFN/CW API via https. (string value)
#instance_connection_is_secure = 0

# Instance connection to CFN/CW API validate certs if SSL is used. (string
# value)
#instance_connection_https_validate_certificates = 1

# Default region name used to get services endpoints. (string value)
#region_name_for_services = <None>

# Keystone role for heat template-defined users. (string value)
#heat_stack_user_role = heat_stack_user

# Keystone domain ID which contains heat template-defined users. If this option
# is set, stack_user_domain_name option will be ignored. (string value)
# Deprecated group/name - [DEFAULT]/stack_user_domain
#stack_user_domain_id = <None>

# Keystone domain name which contains heat template-defined users. If
# `stack_user_domain_id` option is set, this option is ignored. (string value)
#stack_user_domain_name = <None>

# Keystone username, a user with roles sufficient to manage users and projects
# in the stack_user_domain. (string value)
#stack_domain_admin = <None>

# Keystone password for stack_domain_admin user. (string value)
#stack_domain_admin_password = <None>

# Maximum raw byte size of any template. (integer value)
#max_template_size = 524288

# Maximum depth allowed when using nested stacks. (integer value)
#max_nested_stack_depth = 5

# Number of heat-engine processes to fork and run. Will default to either to 4
# or number of CPUs on the host, whichever is greater. (integer value)
#num_engine_workers = <None>

#
# From heat.common.crypt
#

# Key used to encrypt authentication info in the database. Length of this key
# must be 32 characters. (string value)
#auth_encryption_key = notgood but just long enough i t

#
# From heat.common.wsgi
#

# Maximum raw byte size of JSON request body. Should be larger than
# max_template_size. (integer value)
#max_json_body_size = 1048576

#
# From heat.engine.clients
#

# Fully qualified class name to use as a client backend. (string value)
#cloud_backend = heat.engine.clients.OpenStackClients

#
# From heat.engine.notification
#

# Default notification level for outgoingnotifications. (string value)
#default_notification_level = INFO

# Default publisher_id for outgoing notifications. (string value)
#default_publisher_id = <None>

#
# From heat.engine.resources
#

# Custom template for the built-in loadbalancer nested stack. (string value)
#loadbalancer_template = <None>

#
# From oslo.log
#

# If set to true, the logging level will be set to DEBUG instead of the default
# INFO level. (boolean value)
# Note: This option can be changed without restarting.
#debug = false

# DEPRECATED: If set to false, the logging level will be set to WARNING instead
# of the default INFO level. (boolean value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#verbose = true

# The name of a logging configuration file. This file is appended to any
# existing logging configuration files. For details about logging configuration
# files, see the Python logging module documentation. Note that when logging
# configuration files are used then all logging configuration is set in the
# configuration file and other logging configuration options are ignored (for
# example, logging_context_format_string). (string value)
# Note: This option can be changed without restarting.
# Deprecated group/name - [DEFAULT]/log_config
#log_config_append = <None>

# Defines the format string for %%(asctime)s in log records. Default:
# %(default)s . This option is ignored if log_config_append is set. (string
# value)
#log_date_format = %Y-%m-%d %H:%M:%S

# (Optional) Name of log file to send logging output to. If no default is set,
# logging will go to stderr as defined by use_stderr. This option is ignored if
# log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logfile
#log_file = <None>

# (Optional) The base directory used for relative log_file  paths. This option
# is ignored if log_config_append is set. (string value)
# Deprecated group/name - [DEFAULT]/logdir
#log_dir = <None>

# Uses logging handler designed to watch file system. When log file is moved or
# removed this handler will open a new log file with specified path
# instantaneously. It makes sense only if log_file option is specified and
# Linux platform is used. This option is ignored if log_config_append is set.
# (boolean value)
#watch_log_file = false

# Use syslog for logging. Existing syslog format is DEPRECATED and will be
# changed later to honor RFC5424. This option is ignored if log_config_append
# is set. (boolean value)
#use_syslog = false

# Syslog facility to receive log lines. This option is ignored if
# log_config_append is set. (string value)
#syslog_log_facility = LOG_USER

# Log output to standard error. This option is ignored if log_config_append is
# set. (boolean value)
#use_stderr = false

# Format string to use for log messages with context. (string value)
#logging_context_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(request_id)s %(user_identity)s] %(instance)s%(message)s

# Format string to use for log messages when context is undefined. (string
# value)
#logging_default_format_string = %(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

# Additional data to append to log message when logging level for the message
# is DEBUG. (string value)
#logging_debug_format_suffix = %(funcName)s %(pathname)s:%(lineno)d

# Prefix each line of exception output with this format. (string value)
#logging_exception_prefix = %(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

# Defines the format string for %(user_identity)s that is used in
# logging_context_format_string. (string value)
#logging_user_identity_format = %(user)s %(tenant)s %(domain)s %(user_domain)s %(project_domain)s

# List of package logging levels in logger=LEVEL pairs. This option is ignored
# if log_config_append is set. (list value)
#default_log_levels = amqp=WARN,amqplib=WARN,boto=WARN,qpid=WARN,sqlalchemy=WARN,suds=INFO,oslo.messaging=INFO,iso8601=WARN,requests.packages.urllib3.connectionpool=WARN,urllib3.connectionpool=WARN,websocket=WARN,requests.packages.urllib3.util.retry=WARN,urllib3.util.retry=WARN,keystonemiddleware=WARN,routes.middleware=WARN,stevedore=WARN,taskflow=WARN,keystoneauth=WARN,oslo.cache=INFO,dogpile.core.dogpile=INFO

# Enables or disables publication of error events. (boolean value)
#publish_errors = false

# The format for an instance that is passed with the log message. (string
# value)
#instance_format = "[instance: %(uuid)s] "

# The format for an instance UUID that is passed with the log message. (string
# value)
#instance_uuid_format = "[instance: %(uuid)s] "

# Interval, number of seconds, of log rate limiting. (integer value)
#rate_limit_interval = 0

# Maximum number of logged messages per rate_limit_interval. (integer value)
#rate_limit_burst = 0

# Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG
# or empty string. Logs with level greater or equal to rate_limit_except_level
# are not filtered. An empty string means that all levels are filtered. (string
# value)
#rate_limit_except_level = CRITICAL

# Enables or disables fatal status of deprecations. (boolean value)
#fatal_deprecations = false

#
# From oslo.messaging
#

# Size of RPC connection pool. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_conn_pool_size
#rpc_conn_pool_size = 30

# The pool size limit for connections expiration policy (integer value)
#conn_pool_min_size = 2

# The time-to-live in sec of idle connections in the pool (integer value)
#conn_pool_ttl = 1200

# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
# The "host" option should point or resolve to this address. (string value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
#rpc_zmq_bind_address = *

# MatchMaker driver. (string value)
# Allowed values: redis, sentinel, dummy
# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
#rpc_zmq_matchmaker = redis

# Number of ZeroMQ contexts, defaults to 1. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
#rpc_zmq_contexts = 1

# Maximum number of ingress messages to locally buffer per topic. Default is
# unlimited. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
#rpc_zmq_topic_backlog = <None>

# Directory for holding IPC sockets. (string value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
#rpc_zmq_ipc_dir = /var/run/openstack

# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
# "host" option, if running Nova. (string value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_host
#rpc_zmq_host = localhost

# Number of seconds to wait before all pending messages will be sent after
# closing a socket. The default value of -1 specifies an infinite linger
# period. The value of 0 specifies no linger period. Pending messages shall be
# discarded immediately when the socket is closed. Positive values specify an
# upper bound for the linger period. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
#zmq_linger = -1

# The default number of seconds that poll should wait. Poll raises timeout
# exception when timeout expired. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
#rpc_poll_timeout = 1

# Expiration timeout in seconds of a name service record about existing target
# ( < 0 means no timeout). (integer value)
# Deprecated group/name - [DEFAULT]/zmq_target_expire
#zmq_target_expire = 300

# Update period in seconds of a name service record about existing target.
# (integer value)
# Deprecated group/name - [DEFAULT]/zmq_target_update
#zmq_target_update = 180

# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
# value)
# Deprecated group/name - [DEFAULT]/use_pub_sub
#use_pub_sub = false

# Use ROUTER remote proxy. (boolean value)
# Deprecated group/name - [DEFAULT]/use_router_proxy
#use_router_proxy = false

# This option makes direct connections dynamic or static. It makes sense only
# with use_router_proxy=False which means to use direct connections for direct
# message types (ignored otherwise). (boolean value)
#use_dynamic_connections = false

# How many additional connections to a host will be made for failover reasons.
# This option is actual only in dynamic connections mode. (integer value)
#zmq_failover_connections = 2

# Minimal port number for random ports range. (port value)
# Minimum value: 0
# Maximum value: 65535
# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
#rpc_zmq_min_port = 49153

# Maximal port number for random ports range. (integer value)
# Minimum value: 1
# Maximum value: 65536
# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
#rpc_zmq_max_port = 65536

# Number of retries to find free port number before fail with ZMQBindError.
# (integer value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
#rpc_zmq_bind_port_retries = 100

# Default serialization mechanism for serializing/deserializing
# outgoing/incoming messages (string value)
# Allowed values: json, msgpack
# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
#rpc_zmq_serialization = json

# This option configures round-robin mode in zmq socket. True means not keeping
# a queue when server side disconnects. False means to keep queue and messages
# even if server is disconnected, when the server appears we send all
# accumulated messages to it. (boolean value)
#zmq_immediate = true

# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
# other negative value) means to skip any overrides and leave it to OS default;
# 0 and 1 (or any other positive value) mean to disable and enable the option
# respectively. (integer value)
#zmq_tcp_keepalive = -1

# The duration between two keepalive transmissions in idle condition. The unit
# is platform dependent, for example, seconds in Linux, milliseconds in Windows
# etc. The default value of -1 (or any other negative value and 0) means to
# skip any overrides and leave it to OS default. (integer value)
#zmq_tcp_keepalive_idle = -1

# The number of retransmissions to be carried out before declaring that remote
# end is not available. The default value of -1 (or any other negative value
# and 0) means to skip any overrides and leave it to OS default. (integer
# value)
#zmq_tcp_keepalive_cnt = -1

# The duration between two successive keepalive retransmissions, if
# acknowledgement to the previous keepalive transmission is not received. The
# unit is platform dependent, for example, seconds in Linux, milliseconds in
# Windows etc. The default value of -1 (or any other negative value and 0)
# means to skip any overrides and leave it to OS default. (integer value)
#zmq_tcp_keepalive_intvl = -1

# Maximum number of (green) threads to work concurrently. (integer value)
#rpc_thread_pool_size = 100

# Expiration timeout in seconds of a sent/received message after which it is
# not tracked anymore by a client/server. (integer value)
#rpc_message_ttl = 300

# Wait for message acknowledgements from receivers. This mechanism works only
# via proxy without PUB/SUB. (boolean value)
#rpc_use_acks = false

# Number of seconds to wait for an ack from a cast/call. After each retry
# attempt this timeout is multiplied by some specified multiplier. (integer
# value)
#rpc_ack_timeout_base = 15

# Number to multiply base ack timeout by after each retry attempt. (integer
# value)
#rpc_ack_timeout_multiplier = 2

# Default number of message sending attempts in case of any problems occurred:
# positive value N means at most N retries, 0 means no retries, None or -1 (or
# any other negative values) mean to retry forever. This option is used only if
# acknowledgments are enabled. (integer value)
#rpc_retry_attempts = 3

# List of publisher hosts SubConsumer can subscribe on. This option has higher
# priority then the default publishers list taken from the matchmaker. (list
# value)
#subscribe_on =

# Size of executor thread pool. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_thread_pool_size
#executor_thread_pool_size = 64

# Seconds to wait for a response from a call. (integer value)
#rpc_response_timeout = 60

# A URL representing the messaging driver to use and its full configuration.
# (string value)
#transport_url = <None>

# DEPRECATED: The messaging driver to use, defaults to rabbit. Other drivers
# include amqp and zmq. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rpc_backend = rabbit

# The default exchange under which topics are scoped. May be overridden by an
# exchange name specified in the transport_url option. (string value)
#control_exchange = openstack

#
# From oslo.service.periodic_task
#

# Some periodic tasks can be run in a separate process. Should we run them
# here? (boolean value)
#run_external_periodic_tasks = true

#
# From oslo.service.service
#

# Enable eventlet backdoor.  Acceptable values are 0, <port>, and
# <start>:<end>, where 0 results in listening on a random tcp port number;
# <port> results in listening on the specified port number (and not enabling
# backdoor if that port is in use); and <start>:<end> results in listening on
# the smallest unused port number within the specified range of port numbers.
# The chosen port is displayed in the service's log file. (string value)
#backdoor_port = <None>

# Enable eventlet backdoor, using the provided path as a unix socket that can
# receive connections. This option is mutually exclusive with 'backdoor_port'
# in that only one should be provided. If both are provided then the existence
# of this option overrides the usage of that option. (string value)
#backdoor_socket = <None>

# Enables or disables logging values of all registered options when starting a
# service (at DEBUG level). (boolean value)
#log_options = true

# Specify a timeout after which a gracefully shutdown server will exit. Zero
# value means endless wait. (integer value)
#graceful_shutdown_timeout = 60


[auth_password]

#
# From heat.common.config
#

# Allow orchestration of multiple clouds. (boolean value)
#multi_cloud = false

# Allowed keystone endpoints for auth_uri when multi_cloud is enabled. At least
# one endpoint needs to be specified. (list value)
#allowed_auth_uris =


[clients]

#
# From heat.common.config
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = publicURL

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = false


[clients_aodh]

#
# From heat.common.config
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = <None>

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = <None>


[clients_barbican]

#
# From heat.common.config
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = <None>

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = <None>


[clients_ceilometer]

#
# From heat.common.config
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = <None>

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = <None>


[clients_cinder]

#
# From heat.common.config
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = <None>

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = <None>

# Allow client's debug log output. (boolean value)
#http_log_debug = false


[clients_designate]

#
# From heat.common.config
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = <None>

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = <None>


[clients_glance]

#
# From heat.common.config
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = <None>

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = <None>


[clients_heat]

#
# From heat.common.config
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = <None>

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = <None>

# Optional heat url in format like http://0.0.0.0:8004/v1/%(tenant_id)s.
# (string value)
#url =


[clients_keystone]

#
# From heat.common.config
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = <None>

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = <None>

# Unversioned keystone url in format like http://0.0.0.0:5000. (string value)
#auth_uri =


[clients_magnum]

#
# From heat.common.config
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = <None>

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = <None>


[clients_manila]

#
# From heat.common.config
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = <None>

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = <None>


[clients_mistral]

#
# From heat.common.config
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = <None>

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = <None>


[clients_monasca]

#
# From heat.common.config
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = <None>

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = <None>


[clients_neutron]

#
# From heat.common.config
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = <None>

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = <None>


[clients_nova]

#
# From heat.common.config
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = <None>

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = <None>

# Allow client's debug log output. (boolean value)
#http_log_debug = false


[clients_sahara]

#
# From heat.common.config
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = <None>

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = <None>


[clients_senlin]

#
# From heat.common.config
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = <None>

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = <None>


[clients_swift]

#
# From heat.common.config
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = <None>

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = <None>


[clients_trove]

#
# From heat.common.config
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = <None>

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = <None>


[clients_zaqar]

#
# From heat.common.config
#

# Type of endpoint in Identity service catalog to use for communication with
# the OpenStack service. (string value)
#endpoint_type = <None>

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = <None>


[cors]

#
# From oslo.middleware
#

# Indicate whether this resource may be shared with the domain received in the
# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
# slash. Example: https://horizon.example.com (list value)
#allowed_origin = <None>

# Indicate that the actual request can include user credentials (boolean value)
#allow_credentials = true

# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
# Headers. (list value)
#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID

# Maximum cache age of CORS preflight requests. (integer value)
#max_age = 3600

# Indicate which methods can be used during the actual request. (list value)
#allow_methods = GET,PUT,POST,DELETE,PATCH

# Indicate which header field names may be used during the actual request.
# (list value)
#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID


[cors.subdomain]

#
# From oslo.middleware
#

# Indicate whether this resource may be shared with the domain received in the
# requests "origin" header. Format: "<protocol>://<host>[:<port>]", no trailing
# slash. Example: https://horizon.example.com (list value)
#allowed_origin = <None>

# Indicate that the actual request can include user credentials (boolean value)
#allow_credentials = true

# Indicate which headers are safe to expose to the API. Defaults to HTTP Simple
# Headers. (list value)
#expose_headers = X-Auth-Token,X-Subject-Token,X-Service-Token,X-OpenStack-Request-ID

# Maximum cache age of CORS preflight requests. (integer value)
#max_age = 3600

# Indicate which methods can be used during the actual request. (list value)
#allow_methods = GET,PUT,POST,DELETE,PATCH

# Indicate which header field names may be used during the actual request.
# (list value)
#allow_headers = X-Auth-Token,X-Identity-Status,X-Roles,X-Service-Catalog,X-User-Id,X-Tenant-Id,X-OpenStack-Request-ID


[database]

#
# From oslo.db
#

# DEPRECATED: The file name to use with SQLite. (string value)
# Deprecated group/name - [DEFAULT]/sqlite_db
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Should use config option connection or slave_connection to connect
# the database.
#sqlite_db = oslo.sqlite

# If True, SQLite uses synchronous mode. (boolean value)
# Deprecated group/name - [DEFAULT]/sqlite_synchronous
#sqlite_synchronous = true

# The back end to use for the database. (string value)
# Deprecated group/name - [DEFAULT]/db_backend
#backend = sqlalchemy

# The SQLAlchemy connection string to use to connect to the database. (string
# value)
# Deprecated group/name - [DEFAULT]/sql_connection
# Deprecated group/name - [DATABASE]/sql_connection
# Deprecated group/name - [sql]/connection
#connection = <None>

# The SQLAlchemy connection string to use to connect to the slave database.
# (string value)
#slave_connection = <None>

# The SQL mode to be used for MySQL sessions. This option, including the
# default, overrides any server-set SQL mode. To use whatever SQL mode is set
# by the server configuration, set this to no value. Example: mysql_sql_mode=
# (string value)
#mysql_sql_mode = TRADITIONAL

# Timeout before idle SQL connections are reaped. (integer value)
# Deprecated group/name - [DEFAULT]/sql_idle_timeout
# Deprecated group/name - [DATABASE]/sql_idle_timeout
# Deprecated group/name - [sql]/idle_timeout
#idle_timeout = 3600

# Minimum number of SQL connections to keep open in a pool. (integer value)
# Deprecated group/name - [DEFAULT]/sql_min_pool_size
# Deprecated group/name - [DATABASE]/sql_min_pool_size
#min_pool_size = 1

# Maximum number of SQL connections to keep open in a pool. Setting a value of
# 0 indicates no limit. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_pool_size
# Deprecated group/name - [DATABASE]/sql_max_pool_size
#max_pool_size = 5

# Maximum number of database connection retries during startup. Set to -1 to
# specify an infinite retry count. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_retries
# Deprecated group/name - [DATABASE]/sql_max_retries
#max_retries = 10

# Interval between retries of opening a SQL connection. (integer value)
# Deprecated group/name - [DEFAULT]/sql_retry_interval
# Deprecated group/name - [DATABASE]/reconnect_interval
#retry_interval = 10

# If set, use this value for max_overflow with SQLAlchemy. (integer value)
# Deprecated group/name - [DEFAULT]/sql_max_overflow
# Deprecated group/name - [DATABASE]/sqlalchemy_max_overflow
#max_overflow = 50

# Verbosity of SQL debugging information: 0=None, 100=Everything. (integer
# value)
# Minimum value: 0
# Maximum value: 100
# Deprecated group/name - [DEFAULT]/sql_connection_debug
#connection_debug = 0

# Add Python stack traces to SQL as comment strings. (boolean value)
# Deprecated group/name - [DEFAULT]/sql_connection_trace
#connection_trace = false

# If set, use this value for pool_timeout with SQLAlchemy. (integer value)
# Deprecated group/name - [DATABASE]/sqlalchemy_pool_timeout
#pool_timeout = <None>

# Enable the experimental use of database reconnect on connection lost.
# (boolean value)
#use_db_reconnect = false

# Seconds between retries of a database transaction. (integer value)
#db_retry_interval = 1

# If True, increases the interval between retries of a database operation up to
# db_max_retry_interval. (boolean value)
#db_inc_retry_interval = true

# If db_inc_retry_interval is set, the maximum seconds between retries of a
# database operation. (integer value)
#db_max_retry_interval = 10

# Maximum retries in case of connection error or deadlock error before error is
# raised. Set to -1 to specify an infinite retry count. (integer value)
#db_max_retries = 20


[ec2authtoken]

#
# From heat.api.aws.ec2token
#

# Authentication Endpoint URI. (string value)
#auth_uri = <None>

# Allow orchestration of multiple clouds. (boolean value)
#multi_cloud = false

# Allowed keystone endpoints for auth_uri when multi_cloud is enabled. At least
# one endpoint needs to be specified. (list value)
#allowed_auth_uris =

# Optional PEM-formatted certificate chain file. (string value)
#cert_file = <None>

# Optional PEM-formatted file that contains the private key. (string value)
#key_file = <None>

# Optional CA cert file to use in SSL connections. (string value)
#ca_file = <None>

# If set, then the server's certificate will not be verified. (boolean value)
#insecure = false


[eventlet_opts]

#
# From heat.common.wsgi
#

# If False, closes the client socket connection explicitly. (boolean value)
#wsgi_keep_alive = true

# Timeout for client connections' socket operations. If an incoming connection
# is idle for this number of seconds it will be closed. A value of '0' means
# wait forever. (integer value)
#client_socket_timeout = 900


[healthcheck]

#
# From oslo.middleware
#

# DEPRECATED: The path to respond to healtcheck requests on. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#path = /healthcheck

# Show more detailed information as part of the response (boolean value)
#detailed = false

# Additional backends that can perform health checks and report that
# information back as part of a request. (list value)
#backends =

# Check the presence of a file to determine if an application is running on a
# port. Used by DisableByFileHealthcheck plugin. (string value)
#disable_by_file_path = <None>

# Check the presence of a file based on a port to determine if an application
# is running on a port. Expects a "port:path" list of strings. Used by
# DisableByFilesPortsHealthcheck plugin. (list value)
#disable_by_file_paths =


[heat_api]

#
# From heat.common.wsgi
#

# Address to bind the server. Useful when selecting a particular network
# interface. (IP address value)
# Deprecated group/name - [DEFAULT]/bind_host
#bind_host = 0.0.0.0

# The port on which the server will listen. (port value)
# Minimum value: 0
# Maximum value: 65535
# Deprecated group/name - [DEFAULT]/bind_port
#bind_port = 8004

# Number of backlog requests to configure the socket with. (integer value)
# Deprecated group/name - [DEFAULT]/backlog
#backlog = 4096

# Location of the SSL certificate file to use for SSL mode. (string value)
# Deprecated group/name - [DEFAULT]/cert_file
#cert_file = <None>

# Location of the SSL key file to use for enabling SSL mode. (string value)
# Deprecated group/name - [DEFAULT]/key_file
#key_file = <None>

# Number of workers for Heat service. Default value 0 means, that service will
# start number of workers equal number of cores on server. (integer value)
# Minimum value: 0
# Deprecated group/name - [DEFAULT]/workers
#workers = 0

# Maximum line size of message headers to be accepted. max_header_line may need
# to be increased when using large tokens (typically those generated by the
# Keystone v3 API with big service catalogs). (integer value)
#max_header_line = 16384

# The value for the socket option TCP_KEEPIDLE.  This is the time in seconds
# that the connection must be idle before TCP starts sending keepalive probes.
# (integer value)
#tcp_keepidle = 600


[heat_api_cfn]

#
# From heat.common.wsgi
#

# Address to bind the server. Useful when selecting a particular network
# interface. (IP address value)
# Deprecated group/name - [DEFAULT]/bind_host
#bind_host = 0.0.0.0

# The port on which the server will listen. (port value)
# Minimum value: 0
# Maximum value: 65535
# Deprecated group/name - [DEFAULT]/bind_port
#bind_port = 8000

# Number of backlog requests to configure the socket with. (integer value)
# Deprecated group/name - [DEFAULT]/backlog
#backlog = 4096

# Location of the SSL certificate file to use for SSL mode. (string value)
# Deprecated group/name - [DEFAULT]/cert_file
#cert_file = <None>

# Location of the SSL key file to use for enabling SSL mode. (string value)
# Deprecated group/name - [DEFAULT]/key_file
#key_file = <None>

# Number of workers for Heat service. (integer value)
# Minimum value: 0
# Deprecated group/name - [DEFAULT]/workers
#workers = 1

# Maximum line size of message headers to be accepted. max_header_line may need
# to be increased when using large tokens (typically those generated by the
# Keystone v3 API with big service catalogs). (integer value)
#max_header_line = 16384

# The value for the socket option TCP_KEEPIDLE.  This is the time in seconds
# that the connection must be idle before TCP starts sending keepalive probes.
# (integer value)
#tcp_keepidle = 600


[heat_api_cloudwatch]

#
# From heat.common.wsgi
#

# Address to bind the server. Useful when selecting a particular network
# interface. (IP address value)
# Deprecated group/name - [DEFAULT]/bind_host
#bind_host = 0.0.0.0

# The port on which the server will listen. (port value)
# Minimum value: 0
# Maximum value: 65535
# Deprecated group/name - [DEFAULT]/bind_port
#bind_port = 8003

# Number of backlog requests to configure the socket with. (integer value)
# Deprecated group/name - [DEFAULT]/backlog
#backlog = 4096

# Location of the SSL certificate file to use for SSL mode. (string value)
# Deprecated group/name - [DEFAULT]/cert_file
#cert_file = <None>

# Location of the SSL key file to use for enabling SSL mode. (string value)
# Deprecated group/name - [DEFAULT]/key_file
#key_file = <None>

# Number of workers for Heat service. (integer value)
# Minimum value: 0
# Deprecated group/name - [DEFAULT]/workers
#workers = 1

# Maximum line size of message headers to be accepted. max_header_line may need
# to be increased when using large tokens (typically those generated by the
# Keystone v3 API with big service catalogs.) (integer value)
#max_header_line = 16384

# The value for the socket option TCP_KEEPIDLE.  This is the time in seconds
# that the connection must be idle before TCP starts sending keepalive probes.
# (integer value)
#tcp_keepidle = 600


[keystone_authtoken]

#
# From keystonemiddleware.auth_token
#

# Complete "public" Identity API endpoint. This endpoint should not be an
# "admin" endpoint, as it should be accessible by all end users.
# Unauthenticated clients are redirected to this endpoint to authenticate.
# Although this endpoint should  ideally be unversioned, client support in the
# wild varies.  If you're using a versioned v2 endpoint here, then this  should
# *not* be the same endpoint the service user utilizes  for validating tokens,
# because normal end users may not be  able to reach that endpoint. (string
# value)
#auth_uri = <None>

# API version of the admin Identity API endpoint. (string value)
#auth_version = <None>

# Do not handle authorization requests within the middleware, but delegate the
# authorization decision to downstream WSGI components. (boolean value)
#delay_auth_decision = false

# Request timeout value for communicating with Identity API server. (integer
# value)
#http_connect_timeout = <None>

# How many times are we trying to reconnect when communicating with Identity
# API Server. (integer value)
#http_request_max_retries = 3

# Request environment key where the Swift cache object is stored. When
# auth_token middleware is deployed with a Swift cache, use this option to have
# the middleware share a caching backend with swift. Otherwise, use the
# ``memcached_servers`` option instead. (string value)
#cache = <None>

# Required if identity server requires client certificate (string value)
#certfile = <None>

# Required if identity server requires client certificate (string value)
#keyfile = <None>

# A PEM encoded Certificate Authority to use when verifying HTTPs connections.
# Defaults to system CAs. (string value)
#cafile = <None>

# Verify HTTPS connections. (boolean value)
#insecure = false

# The region in which the identity server can be found. (string value)
#region_name = <None>

# DEPRECATED: Directory used to cache files related to PKI tokens. This option
# has been deprecated in the Ocata release and will be removed in the P
# release. (string value)
# This option is deprecated for removal since Ocata.
# Its value may be silently ignored in the future.
# Reason: PKI token format is no longer supported.
#signing_dir = <None>

# Optionally specify a list of memcached server(s) to use for caching. If left
# undefined, tokens will instead be cached in-process. (list value)
# Deprecated group/name - [keystone_authtoken]/memcache_servers
#memcached_servers = <None>

# In order to prevent excessive effort spent validating tokens, the middleware
# caches previously-seen tokens for a configurable duration (in seconds). Set
# to -1 to disable caching completely. (integer value)
#token_cache_time = 300

# DEPRECATED: Determines the frequency at which the list of revoked tokens is
# retrieved from the Identity service (in seconds). A high number of revocation
# events combined with a low cache duration may significantly reduce
# performance. Only valid for PKI tokens. This option has been deprecated in
# the Ocata release and will be removed in the P release. (integer value)
# This option is deprecated for removal since Ocata.
# Its value may be silently ignored in the future.
# Reason: PKI token format is no longer supported.
#revocation_cache_time = 10

# (Optional) If defined, indicate whether token data should be authenticated or
# authenticated and encrypted. If MAC, token data is authenticated (with HMAC)
# in the cache. If ENCRYPT, token data is encrypted and authenticated in the
# cache. If the value is not one of these options or empty, auth_token will
# raise an exception on initialization. (string value)
# Allowed values: None, MAC, ENCRYPT
#memcache_security_strategy = None

# (Optional, mandatory if memcache_security_strategy is defined) This string is
# used for key derivation. (string value)
#memcache_secret_key = <None>

# (Optional) Number of seconds memcached server is considered dead before it is
# tried again. (integer value)
#memcache_pool_dead_retry = 300

# (Optional) Maximum total number of open connections to every memcached
# server. (integer value)
#memcache_pool_maxsize = 10

# (Optional) Socket timeout in seconds for communicating with a memcached
# server. (integer value)
#memcache_pool_socket_timeout = 3

# (Optional) Number of seconds a connection to memcached is held unused in the
# pool before it is closed. (integer value)
#memcache_pool_unused_timeout = 60

# (Optional) Number of seconds that an operation will wait to get a memcached
# client connection from the pool. (integer value)
#memcache_pool_conn_get_timeout = 10

# (Optional) Use the advanced (eventlet safe) memcached client pool. The
# advanced pool will only work under python 2.x. (boolean value)
#memcache_use_advanced_pool = false

# (Optional) Indicate whether to set the X-Service-Catalog header. If False,
# middleware will not ask for service catalog on token validation and will not
# set the X-Service-Catalog header. (boolean value)
#include_service_catalog = true

# Used to control the use and type of token binding. Can be set to: "disabled"
# to not check token binding. "permissive" (default) to validate binding
# information if the bind type is of a form known to the server and ignore it
# if not. "strict" like "permissive" but if the bind type is unknown the token
# will be rejected. "required" any form of token binding is needed to be
# allowed. Finally the name of a binding method that must be present in tokens.
# (string value)
#enforce_token_bind = permissive

# DEPRECATED: If true, the revocation list will be checked for cached tokens.
# This requires that PKI tokens are configured on the identity server. (boolean
# value)
# This option is deprecated for removal since Ocata.
# Its value may be silently ignored in the future.
# Reason: PKI token format is no longer supported.
#check_revocations_for_cached = false

# DEPRECATED: Hash algorithms to use for hashing PKI tokens. This may be a
# single algorithm or multiple. The algorithms are those supported by Python
# standard hashlib.new(). The hashes will be tried in the order given, so put
# the preferred one first for performance. The result of the first hash will be
# stored in the cache. This will typically be set to multiple values only while
# migrating from a less secure algorithm to a more secure one. Once all the old
# tokens are expired this option should be set to a single value for better
# performance. (list value)
# This option is deprecated for removal since Ocata.
# Its value may be silently ignored in the future.
# Reason: PKI token format is no longer supported.
#hash_algorithms = md5

# A choice of roles that must be present in a service token. Service tokens are
# allowed to request that an expired token can be used and so this check should
# tightly control that only actual services should be sending this token. Roles
# here are applied as an ANY check so any role in this list must be present.
# For backwards compatibility reasons this currently only affects the
# allow_expired check. (list value)
#service_token_roles = service

# For backwards compatibility reasons we must let valid service tokens pass
# that don't pass the service_token_roles check as valid. Setting this true
# will become the default in a future release and should be enabled if
# possible. (boolean value)
#service_token_roles_required = false

# Authentication type to load (string value)
# Deprecated group/name - [keystone_authtoken]/auth_plugin
#auth_type = <None>

# Config Section from which to load plugin specific options (string value)
#auth_section = <None>


[matchmaker_redis]

#
# From oslo.messaging
#

# DEPRECATED: Host to locate redis. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#host = 127.0.0.1

# DEPRECATED: Use this port to connect to redis host. (port value)
# Minimum value: 0
# Maximum value: 65535
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#port = 6379

# DEPRECATED: Password for Redis server (optional). (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#password =

# DEPRECATED: List of Redis Sentinel hosts (fault tolerance mode), e.g.,
# [host:port, host1:port ... ] (list value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#sentinel_hosts =

# Redis replica set name. (string value)
#sentinel_group_name = oslo-messaging-zeromq

# Time in ms to wait between connection attempts. (integer value)
#wait_timeout = 2000

# Time in ms to wait before the transaction is killed. (integer value)
#check_timeout = 20000

# Timeout in ms on blocking socket operations. (integer value)
#socket_timeout = 10000


[oslo_messaging_amqp]

#
# From oslo.messaging
#

# Name for the AMQP container. must be globally unique. Defaults to a generated
# UUID (string value)
# Deprecated group/name - [amqp1]/container_name
#container_name = <None>

# Timeout for inactive connections (in seconds) (integer value)
# Deprecated group/name - [amqp1]/idle_timeout
#idle_timeout = 0

# Debug: dump AMQP frames to stdout (boolean value)
# Deprecated group/name - [amqp1]/trace
#trace = false

# CA certificate PEM file used to verify the server's certificate (string
# value)
# Deprecated group/name - [amqp1]/ssl_ca_file
#ssl_ca_file =

# Self-identifying certificate PEM file for client authentication (string
# value)
# Deprecated group/name - [amqp1]/ssl_cert_file
#ssl_cert_file =

# Private key PEM file used to sign ssl_cert_file certificate (optional)
# (string value)
# Deprecated group/name - [amqp1]/ssl_key_file
#ssl_key_file =

# Password for decrypting ssl_key_file (if encrypted) (string value)
# Deprecated group/name - [amqp1]/ssl_key_password
#ssl_key_password = <None>

# DEPRECATED: Accept clients using either SSL or plain TCP (boolean value)
# Deprecated group/name - [amqp1]/allow_insecure_clients
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Not applicable - not a SSL server
#allow_insecure_clients = false

# Space separated list of acceptable SASL mechanisms (string value)
# Deprecated group/name - [amqp1]/sasl_mechanisms
#sasl_mechanisms =

# Path to directory that contains the SASL configuration (string value)
# Deprecated group/name - [amqp1]/sasl_config_dir
#sasl_config_dir =

# Name of configuration file (without .conf suffix) (string value)
# Deprecated group/name - [amqp1]/sasl_config_name
#sasl_config_name =

# User name for message broker authentication (string value)
# Deprecated group/name - [amqp1]/username
#username =

# Password for message broker authentication (string value)
# Deprecated group/name - [amqp1]/password
#password =

# Seconds to pause before attempting to re-connect. (integer value)
# Minimum value: 1
#connection_retry_interval = 1

# Increase the connection_retry_interval by this many seconds after each
# unsuccessful failover attempt. (integer value)
# Minimum value: 0
#connection_retry_backoff = 2

# Maximum limit for connection_retry_interval + connection_retry_backoff
# (integer value)
# Minimum value: 1
#connection_retry_interval_max = 30

# Time to pause between re-connecting an AMQP 1.0 link that failed due to a
# recoverable error. (integer value)
# Minimum value: 1
#link_retry_delay = 10

# The maximum number of attempts to re-send a reply message which failed due to
# a recoverable error. (integer value)
# Minimum value: -1
#default_reply_retry = 0

# The deadline for an rpc reply message delivery. (integer value)
# Minimum value: 5
#default_reply_timeout = 30

# The deadline for an rpc cast or call message delivery. Only used when caller
# does not provide a timeout expiry. (integer value)
# Minimum value: 5
#default_send_timeout = 30

# The deadline for a sent notification message delivery. Only used when caller
# does not provide a timeout expiry. (integer value)
# Minimum value: 5
#default_notify_timeout = 30

# The duration to schedule a purge of idle sender links. Detach link after
# expiry. (integer value)
# Minimum value: 1
#default_sender_link_timeout = 600

# Indicates the addressing mode used by the driver.
# Permitted values:
# 'legacy'   - use legacy non-routable addressing
# 'routable' - use routable addresses
# 'dynamic'  - use legacy addresses if the message bus does not support routing
# otherwise use routable addressing (string value)
#addressing_mode = dynamic

# address prefix used when sending to a specific server (string value)
# Deprecated group/name - [amqp1]/server_request_prefix
#server_request_prefix = exclusive

# address prefix used when broadcasting to all servers (string value)
# Deprecated group/name - [amqp1]/broadcast_prefix
#broadcast_prefix = broadcast

# address prefix when sending to any server in group (string value)
# Deprecated group/name - [amqp1]/group_request_prefix
#group_request_prefix = unicast

# Address prefix for all generated RPC addresses (string value)
#rpc_address_prefix = openstack.org/om/rpc

# Address prefix for all generated Notification addresses (string value)
#notify_address_prefix = openstack.org/om/notify

# Appended to the address prefix when sending a fanout message. Used by the
# message bus to identify fanout messages. (string value)
#multicast_address = multicast

# Appended to the address prefix when sending to a particular RPC/Notification
# server. Used by the message bus to identify messages sent to a single
# destination. (string value)
#unicast_address = unicast

# Appended to the address prefix when sending to a group of consumers. Used by
# the message bus to identify messages that should be delivered in a round-
# robin fashion across consumers. (string value)
#anycast_address = anycast

# Exchange name used in notification addresses.
# Exchange name resolution precedence:
# Target.exchange if set
# else default_notification_exchange if set
# else control_exchange if set
# else 'notify' (string value)
#default_notification_exchange = <None>

# Exchange name used in RPC addresses.
# Exchange name resolution precedence:
# Target.exchange if set
# else default_rpc_exchange if set
# else control_exchange if set
# else 'rpc' (string value)
#default_rpc_exchange = <None>

# Window size for incoming RPC Reply messages. (integer value)
# Minimum value: 1
#reply_link_credit = 200

# Window size for incoming RPC Request messages (integer value)
# Minimum value: 1
#rpc_server_credit = 100

# Window size for incoming Notification messages (integer value)
# Minimum value: 1
#notify_server_credit = 100

# Send messages of this type pre-settled.
# Pre-settled messages will not receive acknowledgement
# from the peer. Note well: pre-settled messages may be
# silently discarded if the delivery fails.
# Permitted values:
# 'rpc-call' - send RPC Calls pre-settled
# 'rpc-reply'- send RPC Replies pre-settled
# 'rpc-cast' - Send RPC Casts pre-settled
# 'notify'   - Send Notifications pre-settled
#  (multi valued)
#pre_settled = rpc-cast
#pre_settled = rpc-reply


[oslo_messaging_kafka]

#
# From oslo.messaging
#

# DEPRECATED: Default Kafka broker Host (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#kafka_default_host = localhost

# DEPRECATED: Default Kafka broker Port (port value)
# Minimum value: 0
# Maximum value: 65535
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#kafka_default_port = 9092

# Max fetch bytes of Kafka consumer (integer value)
#kafka_max_fetch_bytes = 1048576

# Default timeout(s) for Kafka consumers (integer value)
#kafka_consumer_timeout = 1.0

# Pool Size for Kafka Consumers (integer value)
#pool_size = 10

# The pool size limit for connections expiration policy (integer value)
#conn_pool_min_size = 2

# The time-to-live in sec of idle connections in the pool (integer value)
#conn_pool_ttl = 1200

# Group id for Kafka consumer. Consumers in one group will coordinate message
# consumption (string value)
#consumer_group = oslo_messaging_consumer

# Upper bound on the delay for KafkaProducer batching in seconds (floating
# point value)
#producer_batch_timeout = 0.0

# Size of batch for the producer async send (integer value)
#producer_batch_size = 16384


[oslo_messaging_notifications]

#
# From oslo.messaging
#

# The Drivers(s) to handle sending notifications. Possible values are
# messaging, messagingv2, routing, log, test, noop (multi valued)
# Deprecated group/name - [DEFAULT]/notification_driver
#driver =

# A URL representing the messaging driver to use for notifications. If not set,
# we fall back to the same configuration used for RPC. (string value)
# Deprecated group/name - [DEFAULT]/notification_transport_url
#transport_url = <None>

# AMQP topic used for OpenStack notifications. (list value)
# Deprecated group/name - [rpc_notifier2]/topics
# Deprecated group/name - [DEFAULT]/notification_topics
#topics = notifications


[oslo_messaging_rabbit]

#
# From oslo.messaging
#

# Use durable queues in AMQP. (boolean value)
# Deprecated group/name - [DEFAULT]/amqp_durable_queues
# Deprecated group/name - [DEFAULT]/rabbit_durable_queues
#amqp_durable_queues = false

# Auto-delete queues in AMQP. (boolean value)
# Deprecated group/name - [DEFAULT]/amqp_auto_delete
#amqp_auto_delete = false

# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
# distributions. (string value)
# Deprecated group/name - [DEFAULT]/kombu_ssl_version
#kombu_ssl_version =

# SSL key file (valid only if SSL enabled). (string value)
# Deprecated group/name - [DEFAULT]/kombu_ssl_keyfile
#kombu_ssl_keyfile =

# SSL cert file (valid only if SSL enabled). (string value)
# Deprecated group/name - [DEFAULT]/kombu_ssl_certfile
#kombu_ssl_certfile =

# SSL certification authority file (valid only if SSL enabled). (string value)
# Deprecated group/name - [DEFAULT]/kombu_ssl_ca_certs
#kombu_ssl_ca_certs =

# How long to wait before reconnecting in response to an AMQP consumer cancel
# notification. (floating point value)
# Deprecated group/name - [DEFAULT]/kombu_reconnect_delay
#kombu_reconnect_delay = 1.0

# EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not
# be used. This option may not be available in future versions. (string value)
#kombu_compression = <None>

# How long to wait a missing client before abandoning to send it its replies.
# This value should not be longer than rpc_response_timeout. (integer value)
# Deprecated group/name - [oslo_messaging_rabbit]/kombu_reconnect_timeout
#kombu_missing_consumer_retry_timeout = 60

# Determines how the next RabbitMQ node is chosen in case the one we are
# currently connected to becomes unavailable. Takes effect only if more than
# one RabbitMQ node is provided in config. (string value)
# Allowed values: round-robin, shuffle
#kombu_failover_strategy = round-robin

# DEPRECATED: The RabbitMQ broker address where a single node is used. (string
# value)
# Deprecated group/name - [DEFAULT]/rabbit_host
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rabbit_host = localhost

# DEPRECATED: The RabbitMQ broker port where a single node is used. (port
# value)
# Minimum value: 0
# Maximum value: 65535
# Deprecated group/name - [DEFAULT]/rabbit_port
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rabbit_port = 5672

# DEPRECATED: RabbitMQ HA cluster host:port pairs. (list value)
# Deprecated group/name - [DEFAULT]/rabbit_hosts
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rabbit_hosts = $rabbit_host:$rabbit_port

# Connect over SSL for RabbitMQ. (boolean value)
# Deprecated group/name - [DEFAULT]/rabbit_use_ssl
#rabbit_use_ssl = false

# DEPRECATED: The RabbitMQ userid. (string value)
# Deprecated group/name - [DEFAULT]/rabbit_userid
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rabbit_userid = guest

# DEPRECATED: The RabbitMQ password. (string value)
# Deprecated group/name - [DEFAULT]/rabbit_password
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rabbit_password = guest

# The RabbitMQ login method. (string value)
# Allowed values: PLAIN, AMQPLAIN, RABBIT-CR-DEMO
# Deprecated group/name - [DEFAULT]/rabbit_login_method
#rabbit_login_method = AMQPLAIN

# DEPRECATED: The RabbitMQ virtual host. (string value)
# Deprecated group/name - [DEFAULT]/rabbit_virtual_host
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
# Reason: Replaced by [DEFAULT]/transport_url
#rabbit_virtual_host = /

# How frequently to retry connecting with RabbitMQ. (integer value)
#rabbit_retry_interval = 1

# How long to backoff for between retries when connecting to RabbitMQ. (integer
# value)
# Deprecated group/name - [DEFAULT]/rabbit_retry_backoff
#rabbit_retry_backoff = 2

# Maximum interval of RabbitMQ connection retries. Default is 30 seconds.
# (integer value)
#rabbit_interval_max = 30

# DEPRECATED: Maximum number of RabbitMQ connection retries. Default is 0
# (infinite retry count). (integer value)
# Deprecated group/name - [DEFAULT]/rabbit_max_retries
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#rabbit_max_retries = 0

# Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this
# option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring
# is no longer controlled by the x-ha-policy argument when declaring a queue.
# If you just want to make sure that all queues (except those with auto-
# generated names) are mirrored across all nodes, run: "rabbitmqctl set_policy
# HA '^(?!amq\.).*' '{"ha-mode": "all"}' " (boolean value)
# Deprecated group/name - [DEFAULT]/rabbit_ha_queues
#rabbit_ha_queues = false

# Positive integer representing duration in seconds for queue TTL (x-expires).
# Queues which are unused for the duration of the TTL are automatically
# deleted. The parameter affects only reply and fanout queues. (integer value)
# Minimum value: 1
#rabbit_transient_queues_ttl = 1800

# Specifies the number of messages to prefetch. Setting to zero allows
# unlimited messages. (integer value)
#rabbit_qos_prefetch_count = 0

# Number of seconds after which the Rabbit broker is considered down if
# heartbeat's keep-alive fails (0 disable the heartbeat). EXPERIMENTAL (integer
# value)
#heartbeat_timeout_threshold = 60

# How often times during the heartbeat_timeout_threshold we check the
# heartbeat. (integer value)
#heartbeat_rate = 2

# Deprecated, use rpc_backend=kombu+memory or rpc_backend=fake (boolean value)
# Deprecated group/name - [DEFAULT]/fake_rabbit
#fake_rabbit = false

# Maximum number of channels to allow (integer value)
#channel_max = <None>

# The maximum byte size for an AMQP frame (integer value)
#frame_max = <None>

# How often to send heartbeats for consumer's connections (integer value)
#heartbeat_interval = 3

# Enable SSL (boolean value)
#ssl = <None>

# Arguments passed to ssl.wrap_socket (dict value)
#ssl_options = <None>

# Set socket timeout in seconds for connection's socket (floating point value)
#socket_timeout = 0.25

# Set TCP_USER_TIMEOUT in seconds for connection's socket (floating point
# value)
#tcp_user_timeout = 0.25

# Set delay for reconnection to some host which has connection error (floating
# point value)
#host_connection_reconnect_delay = 0.25

# Connection factory implementation (string value)
# Allowed values: new, single, read_write
#connection_factory = single

# Maximum number of connections to keep queued. (integer value)
#pool_max_size = 30

# Maximum number of connections to create above `pool_max_size`. (integer
# value)
#pool_max_overflow = 0

# Default number of seconds to wait for a connections to available (integer
# value)
#pool_timeout = 30

# Lifetime of a connection (since creation) in seconds or None for no
# recycling. Expired connections are closed on acquire. (integer value)
#pool_recycle = 600

# Threshold at which inactive (since release) connections are considered stale
# in seconds or None for no staleness. Stale connections are closed on acquire.
# (integer value)
#pool_stale = 60

# Default serialization mechanism for serializing/deserializing
# outgoing/incoming messages (string value)
# Allowed values: json, msgpack
#default_serializer_type = json

# Persist notification messages. (boolean value)
#notification_persistence = false

# Exchange name for sending notifications (string value)
#default_notification_exchange = ${control_exchange}_notification

# Max number of not acknowledged message which RabbitMQ can send to
# notification listener. (integer value)
#notification_listener_prefetch_count = 100

# Reconnecting retry count in case of connectivity problem during sending
# notification, -1 means infinite retry. (integer value)
#default_notification_retry_attempts = -1

# Reconnecting retry delay in case of connectivity problem during sending
# notification message (floating point value)
#notification_retry_delay = 0.25

# Time to live for rpc queues without consumers in seconds. (integer value)
#rpc_queue_expiration = 60

# Exchange name for sending RPC messages (string value)
#default_rpc_exchange = ${control_exchange}_rpc

# Exchange name for receiving RPC replies (string value)
#rpc_reply_exchange = ${control_exchange}_rpc_reply

# Max number of not acknowledged message which RabbitMQ can send to rpc
# listener. (integer value)
#rpc_listener_prefetch_count = 100

# Max number of not acknowledged message which RabbitMQ can send to rpc reply
# listener. (integer value)
#rpc_reply_listener_prefetch_count = 100

# Reconnecting retry count in case of connectivity problem during sending
# reply. -1 means infinite retry during rpc_timeout (integer value)
#rpc_reply_retry_attempts = -1

# Reconnecting retry delay in case of connectivity problem during sending
# reply. (floating point value)
#rpc_reply_retry_delay = 0.25

# Reconnecting retry count in case of connectivity problem during sending RPC
# message, -1 means infinite retry. If actual retry attempts in not 0 the rpc
# request could be processed more than one time (integer value)
#default_rpc_retry_attempts = -1

# Reconnecting retry delay in case of connectivity problem during sending RPC
# message (floating point value)
#rpc_retry_delay = 0.25


[oslo_messaging_zmq]

#
# From oslo.messaging
#

# ZeroMQ bind address. Should be a wildcard (*), an ethernet interface, or IP.
# The "host" option should point or resolve to this address. (string value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_address
#rpc_zmq_bind_address = *

# MatchMaker driver. (string value)
# Allowed values: redis, sentinel, dummy
# Deprecated group/name - [DEFAULT]/rpc_zmq_matchmaker
#rpc_zmq_matchmaker = redis

# Number of ZeroMQ contexts, defaults to 1. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_contexts
#rpc_zmq_contexts = 1

# Maximum number of ingress messages to locally buffer per topic. Default is
# unlimited. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_topic_backlog
#rpc_zmq_topic_backlog = <None>

# Directory for holding IPC sockets. (string value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_ipc_dir
#rpc_zmq_ipc_dir = /var/run/openstack

# Name of this node. Must be a valid hostname, FQDN, or IP address. Must match
# "host" option, if running Nova. (string value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_host
#rpc_zmq_host = localhost

# Number of seconds to wait before all pending messages will be sent after
# closing a socket. The default value of -1 specifies an infinite linger
# period. The value of 0 specifies no linger period. Pending messages shall be
# discarded immediately when the socket is closed. Positive values specify an
# upper bound for the linger period. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_cast_timeout
#zmq_linger = -1

# The default number of seconds that poll should wait. Poll raises timeout
# exception when timeout expired. (integer value)
# Deprecated group/name - [DEFAULT]/rpc_poll_timeout
#rpc_poll_timeout = 1

# Expiration timeout in seconds of a name service record about existing target
# ( < 0 means no timeout). (integer value)
# Deprecated group/name - [DEFAULT]/zmq_target_expire
#zmq_target_expire = 300

# Update period in seconds of a name service record about existing target.
# (integer value)
# Deprecated group/name - [DEFAULT]/zmq_target_update
#zmq_target_update = 180

# Use PUB/SUB pattern for fanout methods. PUB/SUB always uses proxy. (boolean
# value)
# Deprecated group/name - [DEFAULT]/use_pub_sub
#use_pub_sub = false

# Use ROUTER remote proxy. (boolean value)
# Deprecated group/name - [DEFAULT]/use_router_proxy
#use_router_proxy = false

# This option makes direct connections dynamic or static. It makes sense only
# with use_router_proxy=False which means to use direct connections for direct
# message types (ignored otherwise). (boolean value)
#use_dynamic_connections = false

# How many additional connections to a host will be made for failover reasons.
# This option is actual only in dynamic connections mode. (integer value)
#zmq_failover_connections = 2

# Minimal port number for random ports range. (port value)
# Minimum value: 0
# Maximum value: 65535
# Deprecated group/name - [DEFAULT]/rpc_zmq_min_port
#rpc_zmq_min_port = 49153

# Maximal port number for random ports range. (integer value)
# Minimum value: 1
# Maximum value: 65536
# Deprecated group/name - [DEFAULT]/rpc_zmq_max_port
#rpc_zmq_max_port = 65536

# Number of retries to find free port number before fail with ZMQBindError.
# (integer value)
# Deprecated group/name - [DEFAULT]/rpc_zmq_bind_port_retries
#rpc_zmq_bind_port_retries = 100

# Default serialization mechanism for serializing/deserializing
# outgoing/incoming messages (string value)
# Allowed values: json, msgpack
# Deprecated group/name - [DEFAULT]/rpc_zmq_serialization
#rpc_zmq_serialization = json

# This option configures round-robin mode in zmq socket. True means not keeping
# a queue when server side disconnects. False means to keep queue and messages
# even if server is disconnected, when the server appears we send all
# accumulated messages to it. (boolean value)
#zmq_immediate = true

# Enable/disable TCP keepalive (KA) mechanism. The default value of -1 (or any
# other negative value) means to skip any overrides and leave it to OS default;
# 0 and 1 (or any other positive value) mean to disable and enable the option
# respectively. (integer value)
#zmq_tcp_keepalive = -1

# The duration between two keepalive transmissions in idle condition. The unit
# is platform dependent, for example, seconds in Linux, milliseconds in Windows
# etc. The default value of -1 (or any other negative value and 0) means to
# skip any overrides and leave it to OS default. (integer value)
#zmq_tcp_keepalive_idle = -1

# The number of retransmissions to be carried out before declaring that remote
# end is not available. The default value of -1 (or any other negative value
# and 0) means to skip any overrides and leave it to OS default. (integer
# value)
#zmq_tcp_keepalive_cnt = -1

# The duration between two successive keepalive retransmissions, if
# acknowledgement to the previous keepalive transmission is not received. The
# unit is platform dependent, for example, seconds in Linux, milliseconds in
# Windows etc. The default value of -1 (or any other negative value and 0)
# means to skip any overrides and leave it to OS default. (integer value)
#zmq_tcp_keepalive_intvl = -1

# Maximum number of (green) threads to work concurrently. (integer value)
#rpc_thread_pool_size = 100

# Expiration timeout in seconds of a sent/received message after which it is
# not tracked anymore by a client/server. (integer value)
#rpc_message_ttl = 300

# Wait for message acknowledgements from receivers. This mechanism works only
# via proxy without PUB/SUB. (boolean value)
#rpc_use_acks = false

# Number of seconds to wait for an ack from a cast/call. After each retry
# attempt this timeout is multiplied by some specified multiplier. (integer
# value)
#rpc_ack_timeout_base = 15

# Number to multiply base ack timeout by after each retry attempt. (integer
# value)
#rpc_ack_timeout_multiplier = 2

# Default number of message sending attempts in case of any problems occurred:
# positive value N means at most N retries, 0 means no retries, None or -1 (or
# any other negative values) mean to retry forever. This option is used only if
# acknowledgments are enabled. (integer value)
#rpc_retry_attempts = 3

# List of publisher hosts SubConsumer can subscribe on. This option has higher
# priority then the default publishers list taken from the matchmaker. (list
# value)
#subscribe_on =


[oslo_middleware]

#
# From oslo.middleware
#

# The maximum body size for each  request, in bytes. (integer value)
# Deprecated group/name - [DEFAULT]/osapi_max_request_body_size
# Deprecated group/name - [DEFAULT]/max_request_body_size
#max_request_body_size = 114688

# DEPRECATED: The HTTP Header that will be used to determine what the original
# request protocol scheme was, even if it was hidden by a SSL termination
# proxy. (string value)
# This option is deprecated for removal.
# Its value may be silently ignored in the future.
#secure_proxy_ssl_header = X-Forwarded-Proto

# Whether the application is behind a proxy or not. This determines if the
# middleware should parse the headers or not. (boolean value)
#enable_proxy_headers_parsing = false


[oslo_policy]

#
# From oslo.policy
#

# The file that defines policies. (string value)
# Deprecated group/name - [DEFAULT]/policy_file
#policy_file = policy.json

# Default rule. Enforced when a requested rule is not found. (string value)
# Deprecated group/name - [DEFAULT]/policy_default_rule
#policy_default_rule = default

# Directories where policy configuration files are stored. They can be relative
# to any directory in the search path defined by the config_dir option, or
# absolute paths. The file defined by policy_file must exist for these
# directories to be searched.  Missing or empty directories are ignored. (multi
# valued)
# Deprecated group/name - [DEFAULT]/policy_dirs
#policy_dirs = policy.d


[paste_deploy]

#
# From heat.common.config
#

# The flavor to use. (string value)
#flavor = <None>

# The API paste config file to use. (string value)
#api_paste_config = api-paste.ini


[profiler]

#
# From heat.common.config
#

#
# Enables the profiling for all services on this node. Default value is False
# (fully disable the profiling feature).
#
# Possible values:
#
# * True: Enables the feature
# * False: Disables the feature. The profiling cannot be started via this
# project
# operations. If the profiling is triggered by another project, this project
# part
# will be empty.
#  (boolean value)
# Deprecated group/name - [profiler]/profiler_enabled
#enabled = false

#
# Enables SQL requests profiling in services. Default value is False (SQL
# requests won't be traced).
#
# Possible values:
#
# * True: Enables SQL requests profiling. Each SQL query will be part of the
# trace and can the be analyzed by how much time was spent for that.
# * False: Disables SQL requests profiling. The spent time is only shown on a
# higher level of operations. Single SQL queries cannot be analyzed this
# way.
#  (boolean value)
#trace_sqlalchemy = false

#
# Secret key(s) to use for encrypting context data for performance profiling.
# This string value should have the following format:
# <key1>[,<key2>,...<keyn>],
# where each key is some random string. A user who triggers the profiling via
# the REST API has to set one of these keys in the headers of the REST API call
# to include profiling results of this node for this particular project.
#
# Both "enabled" flag and "hmac_keys" config options should be set to enable
# profiling. Also, to generate correct profiling information across all
# services
# at least one key needs to be consistent between OpenStack projects. This
# ensures it can be used from client side to generate the trace, containing
# information from all possible resources. (string value)
#hmac_keys = SECRET_KEY

#
# Connection string for a notifier backend. Default value is messaging:// which
# sets the notifier to oslo_messaging.
#
# Examples of possible values:
#
# * messaging://: use oslo_messaging driver for sending notifications.
# * mongodb://127.0.0.1:27017 : use mongodb driver for sending notifications.
# * elasticsearch://127.0.0.1:9200 : use elasticsearch driver for sending
# notifications.
#  (string value)
#connection_string = messaging://

#
# Document type for notification indexing in elasticsearch.
#  (string value)
#es_doc_type = notification

#
# This parameter is a time value parameter (for example: es_scroll_time=2m),
# indicating for how long the nodes that participate in the search will
# maintain
# relevant resources in order to continue and support it.
#  (string value)
#es_scroll_time = 2m

#
# Elasticsearch splits large requests in batches. This parameter defines
# maximum size of each batch (for example: es_scroll_size=10000).
#  (integer value)
#es_scroll_size = 10000

#
# Redissentinel provides a timeout option on the connections.
# This parameter defines that timeout (for example: socket_timeout=0.1).
#  (floating point value)
#socket_timeout = 0.1

#
# Redissentinel uses a service name to identify a master redis service.
# This parameter defines the name (for example:
# sentinal_service_name=mymaster).
#  (string value)
#sentinel_service_name = mymaster


[revision]

#
# From heat.common.config
#

# Heat build revision. If you would prefer to manage your build revision
# separately, you can move this section to a different file and add it as
# another config option. (string value)
#heat_revision = unknown


[ssl]

#
# From oslo.service.sslutils
#

# CA certificate file to use to verify connecting clients. (string value)
# Deprecated group/name - [DEFAULT]/ssl_ca_file
#ca_file = <None>

# Certificate file to use when starting the server securely. (string value)
# Deprecated group/name - [DEFAULT]/ssl_cert_file
#cert_file = <None>

# Private key file to use when starting the server securely. (string value)
# Deprecated group/name - [DEFAULT]/ssl_key_file
#key_file = <None>

# SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and
# SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some
# distributions. (string value)
#version = <None>

# Sets the list of available ciphers. value should be a string in the OpenSSL
# cipher list format. (string value)
#ciphers = <None>


[trustee]

#
# From heat.common.context
#

# Authentication type to load (string value)
# Deprecated group/name - [trustee]/auth_plugin
#auth_type = <None>

# Config Section from which to load plugin specific options (string value)
#auth_section = <None>

# Authentication URL (string value)
#auth_url = <None>

# Domain ID to scope to (string value)
#domain_id = <None>

# Domain name to scope to (string value)
#domain_name = <None>

# Project ID to scope to (string value)
# Deprecated group/name - [trustee]/tenant-id
#project_id = <None>

# Project name to scope to (string value)
# Deprecated group/name - [trustee]/tenant-name
#project_name = <None>

# Domain ID containing project (string value)
#project_domain_id = <None>

# Domain name containing project (string value)
#project_domain_name = <None>

# Trust ID (string value)
#trust_id = <None>

# Optional domain ID to use with v3 and v2 parameters. It will be used for both
# the user and project domain in v3 and ignored in v2 authentication. (string
# value)
#default_domain_id = <None>

# Optional domain name to use with v3 API and v2 parameters. It will be used
# for both the user and project domain in v3 and ignored in v2 authentication.
# (string value)
#default_domain_name = <None>

# User id (string value)
#user_id = <None>

# Username (string value)
# Deprecated group/name - [trustee]/user-name
#username = <None>

# User's domain id (string value)
#user_domain_id = <None>

# User's domain name (string value)
#user_domain_name = <None>

# User's password (string value)
#password = <None>


[volumes]

#
# From heat.common.config
#

# Indicate if cinder-backup service is enabled. This is a temporary workaround
# until cinder-backup service becomes discoverable, see LP#1334856. (boolean
# value)
#backups_enabled = true