configs: update crossdev examples

Signed-off-by: Steve Arnold <nerdboy@gentoo.org>

2 files changed, 71 insertions, 10 deletions

diff --git a/configs/armv7m-crossdev.txt b/configs/armv7m-crossdev.txt
index 9367f47..b5e2525 100644
--- a/configs/armv7m-crossdev.txt
+++ b/configs/armv7m-crossdev.txt
@@ -42,12 +42,13 @@ crtbegin.o, add INHIBIT_LIBC_CFLAGS to EXTRA_ECONF:
 
 --genv 'EXTRA_ECONF="--with-host-libstdcxx=-static-libgcc -Wl,-Bstatic,-lstdc++,-Bdynamic -lm" INHIBIT_LIBC_CFLAGS="-DUSE_TM_CLONE_REGISTRY=0"'
 
-Basic CFLAGS for target builds:
+Basic FLAGS for target builds:
 
-CFLAGS="-mthumb -march=armv7e-m -mtune=cortex-m4 -mabi=aapcs \
+CFLAGS_FOR_TARGET="-mthumb -march=armv7e-m -mtune=cortex-m4 -mabi=aapcs \
  -mfpu=fpv4-sp-d16 -mfloat-abi=hard -mfp16-format=ieee \
- -Wa,-mimplicit-it=thumb"
+ -Wa,-mimplicit-it=thumb -O[s2]"
 
+CXXFLAGS_FOR_TARGET="-g -O[s2] -ffunction-sections -fdata-sections -fno-exceptions"
 
 Current vendor toolchain produces:
 
diff --git a/configs/crossdev-examples.txt b/configs/crossdev-examples.txt
index 9a44c64..20fe41c 100644
--- a/configs/crossdev-examples.txt
+++ b/configs/crossdev-examples.txt
@@ -1,8 +1,16 @@
-This works with new USE=ada toolchain overlay and the crossdev-fixes
-branch, however, the current crossdev-99999999 wants to put the cross
-overlay in the wrong place.  The --ov-output swicth does create the
-overlay but then fails to look there.  Apparently using the (deprecated)
-PORTDIR_OVERLAY env var is the only way...
+This works with new USE=ada toolchain overlay from 5.4 up and the newer
+crossdev, however, crossdev-99999999 still wants to put the cross overlay
+in the wrong place.  The --ov-output swicth does create the overlay but
+then crossdev fails to look there.  Apparently using the (deprecated)
+PORTDIR_OVERLAY env var is the best way...
+
+Note these also work (up through cortex-M4, not tested with avr yet)
+with USE=ada for cross/embedded gnat.  For non-glibc/bare-metal
+(currently armv7m with newlib) you should also add "--disable-libada"
+to EXTRA_ECONF.
+
+Note you may need to play with USE flags and set your system linker to
+bfd first if gold is default.
 
 This worked for arm:
 
@@ -17,15 +25,67 @@ as of 10/06/2017 with:
  glibc 2.25-r5
  linux-headers 4.13
 
+To go back slightly to match previous headers, and add some USE flags:
+(remember to disable other overlays first)
+
+PORTDIR_OVERLAY="/usr/local/armv7-a /var/lib/layman/ada" \
+ USE="ada -graphite hardened -fortran -go -jit multitarget -openmp -vtv" \
+ EXTRA_ECONF="--with-arch=armv7-a --with-tune=cortex-a9 --with-float-abi=hard --with-fpu=vfpv3-d16" \
+ crossdev --g 5.4.0-r4 --b 2.28.1 --k 4.10 --l 2.24-r4 \
+ -t armv7a-hardfloat-linux-gnueabi --ex-gdb -v
+
+For gcc 4.9.4 try:
+
+PORTDIR_OVERLAY="/usr/local/armv7-a" \
+ USE="-graphite -hardened -fortran -go -jit multitarget -openmp -vtv" \
+ EXTRA_ECONF="--with-arch=armv7-a --with-tune=cortex-a9 --with-float-abi=hard --with-fpu=vfpv3-d16" \
+ crossdev --g 4.9.4-r1 --b 2.28.1  \
+ -t armv7a-hardfloat-linux-gnueabi --ex-gdb -v
+
 This worked for arm64:
 
 crossdev -v -t aarch64-unknown-linux-gnu --ex-gdb
 
 This worked for cortex-M4:
 
-USE="hardened multitarget lzma -multilib -openmp -fortran -jit" \
+Change the tuning to match your cpu; you need s4 for c++ and ada
+(you may also want to relax the hardened flags).
+
+USE="hardened multitarget lzma multilib -openmp -fortran -jit" \
  EXTRA_ECONF="--disable-multilib --disable-libsanitizer \
  --with-arch=armv7e-m --with-tune=cortex-m4 --with-float-abi=hard \
  --with-fpu=fpv4-sp-d16 --with-mode=thumb" \
- crossdev -t armv7m-hardfloat-eabi --ex-gdb  \
+ crossdev -t armv7m-hardfloat-eabi -s4 --ex-gdb  \
  --show-fail-log  --ov-output /usr/local/cortex-m4
+
+
+This works for avr:
+
+Note that, except for pie, hardened and sanitizer can be enabled,
+but should be disabled if anything doesn't look right.  Also note
+that graphite appears to optimize the arduino sketch loops away,
+so you probably don't want that...
+
+And arduino/other newer builds seem to require c++ and even -flto (which
+also means it needs gold linker and plugins, maybe a manual step now...
+So binutils and gcc need USE=cxx along with stage4 to build the right stuff.
+
+Lastly note you should not need anything older than 4.9.4 and 2.29.1 for
+current arduino IDE use.  If you switch to older binutils after installing
+current avr toolchain you'll need to make a manual symlink for ldscripts.
+
+PORTDIR_OVERLAY="/usr/local/portage/cross-avr" \
+ USE="cxx -graphite -hardened multitarget lzma multilib -sanitize -nls -openmp -pie -fortran -jit -vtv" \
+ EXTRA_ECONF="--enable-libstdcxx-time=no" \
+ crossdev --g 6.4.0  -t avr -s4 --ex-gdb  --show-fail-log  -v
+
+This works for avr and older gcc / binutils:
+Note gcc 4.8.4 is broken wrt avr-libc, at least it fails mmcu compat test
+for "standard" arduino cpus (notably uno and mega) so does not install the
+required crtm*.o files.
+
+PORTDIR_OVERLAY="/usr/local/portage/cross-avr" \
+ USE="cxx -graphite -hardened multitarget lzma multilib -nls -openmp nopie nossp -sanitize -fortran -jit -vtv" \
+ EXTRA_ECONF="--enable-libstdcxx-time=no" \
+ crossdev --g 4.9.4-r1 --b 2.25.1-r1 -t avr -s4 \
+ --ex-gdb  --show-fail-log  -v