diff options
Diffstat (limited to 'sys-apps/lm-sensors/files/lm-sensors-3.4.0-sensors-detect-gentoo.patch')
| -rw-r--r-- | sys-apps/lm-sensors/files/lm-sensors-3.4.0-sensors-detect-gentoo.patch | 342 |
1 files changed, 342 insertions, 0 deletions
diff --git a/sys-apps/lm-sensors/files/lm-sensors-3.4.0-sensors-detect-gentoo.patch b/sys-apps/lm-sensors/files/lm-sensors-3.4.0-sensors-detect-gentoo.patch new file mode 100644 index 0000000..dd77d66 --- /dev/null +++ b/sys-apps/lm-sensors/files/lm-sensors-3.4.0-sensors-detect-gentoo.patch @@ -0,0 +1,342 @@ +From d8603c540cfccda5e011060083108de8f1b820ab Mon Sep 17 00:00:00 2001 +From: Thomas Deutschmann <whissi@gentoo.org> +Date: Tue, 9 Aug 2016 01:19:16 +0200 +Subject: [PATCH 1/3] sensors-detect: Add sd_boot detection + +We need to know in write_config function wether the system is using systemd +or not. +--- + prog/detect/sensors-detect | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +diff --git a/prog/detect/sensors-detect b/prog/detect/sensors-detect +index 057cd96..e29ab4c 100755 +--- a/prog/detect/sensors-detect ++++ b/prog/detect/sensors-detect +@@ -2746,7 +2746,7 @@ sub isa_read_i5d6 + # AUTODETECTION # + ################# + +-use vars qw($dev_i2c $sysfs_root $systemd_systemctl $systemd_system_dir); ++use vars qw($dev_i2c $sysfs_root $systemd_is_booted $systemd_systemctl $systemd_system_dir); + + sub initialize_conf + { +@@ -2820,6 +2820,10 @@ sub initialize_conf + } elsif (-d "/lib/systemd/system") { + $systemd_system_dir = "/lib/systemd/system"; + } ++ ++ # Check whether the system was booted using systemd. ++ # See: man sd_booted ++ $systemd_is_booted = -d '/run/systemd/system'; + } + + # [0] -> VERSION +-- +2.9.3 + + +From 14376e837c4a666fe2088bc7b7fbb90a4520f387 Mon Sep 17 00:00:00 2001 +From: Thomas Deutschmann <whissi@gentoo.org> +Date: Tue, 9 Aug 2016 01:25:52 +0200 +Subject: [PATCH 2/3] sensors-detect: write_config function adjusted for Gentoo + environment + +Bug: https://bugs.gentoo.org/480018 +--- + prog/detect/sensors-detect | 133 +++++++++++++++++++++------------------------ + 1 file changed, 62 insertions(+), 71 deletions(-) + +diff --git a/prog/detect/sensors-detect b/prog/detect/sensors-detect +index e29ab4c..bb5ae0f 100755 +--- a/prog/detect/sensors-detect ++++ b/prog/detect/sensors-detect +@@ -7079,6 +7079,9 @@ sub write_config + { + my ($configfile, $bus_modules, $hwmon_modules) = @_; + ++ my $have_conffiles_created = 0; ++ ++ # /etc/modprobe.d handling + if (defined $configfile) { + my $have_modprobe_d = -d '/etc/modprobe.d'; + printf "Do you want to \%s /etc/modprobe.d/lm_sensors.conf? (\%s): ", +@@ -7087,96 +7090,84 @@ sub write_config + $_ = read_answer(); + if (($have_modprobe_d and not m/^\s*n/i) or m/^\s*y/i) { + unless ($have_modprobe_d) { +- mkdir('/etc/modprobe.d', 0777) ++ mkdir('/etc/modprobe.d', 0755) + or die "Sorry, can't create /etc/modprobe.d ($!)"; + } +- open(local *MODPROBE_D, ">/etc/modprobe.d/lm_sensors.conf") ++ open(local *MODPROBE_D, ">", $have_modprobe_d . '/lm_sensors.conf') + or die "Sorry, can't create /etc/modprobe.d/lm_sensors.conf ($!)"; + print MODPROBE_D "# Generated by sensors-detect on " . scalar localtime() . "\n"; + print MODPROBE_D $configfile; + close(MODPROBE_D); ++ $have_conffiles_created++; + } else { + print "To make the sensors modules behave correctly, add these lines to\n". +- "/etc/modprobe.conf:\n\n"; ++ "/etc/modprobe.d/lm_sensors.conf:\n\n"; + print "#----cut here----\n". + $configfile. + "#----cut here----\n\n"; + } + } + +- my $have_sysconfig = -d '/etc/sysconfig'; +- printf "Do you want to \%s /etc/sysconfig/lm_sensors? (\%s): ", +- (-e '/etc/sysconfig/lm_sensors' ? 'overwrite' : 'generate'), +- ($have_sysconfig ? 'YES/no' : 'yes/NO'); +- $_ = read_answer(); +- if (($have_sysconfig and not m/^\s*n/i) or m/^\s*y/i) { +- unless ($have_sysconfig) { +- mkdir('/etc/sysconfig', 0777) +- or die "Sorry, can't create /etc/sysconfig ($!)"; +- } +- open(local *SYSCONFIG, ">/etc/sysconfig/lm_sensors") +- or die "Sorry, can't create /etc/sysconfig/lm_sensors ($!)"; +- print SYSCONFIG "# Generated by sensors-detect on " . scalar localtime() . "\n"; +- print SYSCONFIG <<'EOT'; +-# This file is sourced by /etc/init.d/lm_sensors and defines the modules to +-# be loaded/unloaded. +-# +-# The format of this file is a shell script that simply defines variables: +-# HWMON_MODULES for hardware monitoring driver modules, and optionally +-# BUS_MODULES for any required bus driver module (for example for I2C or SPI). +- +-EOT +- print SYSCONFIG "BUS_MODULES=\"", join(" ", @{$bus_modules}), "\"\n" +- if @{$bus_modules}; +- print SYSCONFIG "HWMON_MODULES=\"", join(" ", @{$hwmon_modules}), "\"\n"; +- close(SYSCONFIG); +- +- if ($systemd_systemctl && $systemd_system_dir) { +- if (-f "$systemd_system_dir/lm_sensors.service") { +- system($systemd_systemctl, "enable", "lm_sensors.service"); +- system($systemd_systemctl, "start", "lm_sensors.service"); +- # All done, don't check for /etc/init.d/lm_sensors +- } else { +- print "Copy prog/init/lm_sensors.service to $systemd_system_dir\n". +- "and run 'systemctl enable lm_sensors.service'\n". +- "for initialization at boot time.\n"; +- } +- return; ++ # /etc/modules-load.d handling ++ my $modulesload_filedir = '/etc/modules-load.d'; ++ my $modulesload_file = $modulesload_filedir . '/lm_sensors.conf'; ++ my $modulesload_cfg = "# Generated by sensors-detect on " . scalar localtime() . "\n" ++ . join("\n", (@{$bus_modules}, @{$hwmon_modules})) . "\n"; ++ ++ my $have_modulesload_file = -f $modulesload_file; ++ printf "Do you want to \%s '$modulesload_file'? (\%s): ", ++ ($have_modulesload_file ? 'overwrite' : 'generate'), ++ ($have_modulesload_file ? 'yes/NO' : 'YES/no'); ++ ++ my $input = read_answer(); ++ chomp($input); ++ if ($input eq '' && $have_modulesload_file) { ++ $input = 'no'; ++ } ++ elsif ($input eq '' && !$have_modulesload_file) { ++ $input = 'yes'; ++ } ++ ++ if ($input =~ m/^\s*y/i) { ++ unless (-d $modulesload_filedir) { ++ mkdir($modulesload_filedir, 0755) ++ or die "Sorry, can't create '$modulesload_filedir' ($!)"; + } + +- print "Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors\n". +- "for initialization at boot time.\n" +- unless -f "/etc/init.d/lm_sensors"; ++ open(my $fh, '>', $modulesload_file) ++ or die "Sorry, can't open '$modulesload_file' for writing! ($!)"; + +- if (-x "/sbin/insserv" && -f "/etc/init.d/lm_sensors") { +- system("/sbin/insserv", "/etc/init.d/lm_sensors"); +- } elsif (-x "/sbin/chkconfig" && -f "/etc/init.d/lm_sensors") { +- system("/sbin/chkconfig", "lm_sensors", "on"); +- if (-x "/sbin/service") { +- system("/sbin/service", "lm_sensors", "start"); +- } ++ print $fh $modulesload_cfg; ++ close($fh); ++ ++ $have_conffiles_created++; ++ } ++ else { ++ print "\nPlease create '$modulesload_file' with the following content\n" ++ . "to allow modules-load service to autoload modules on boot:\n\n"; ++ print "#----cut here----\n" ++ . "# Generated by sensors-detect on " . scalar localtime() . "\n" ++ . join("\n", (@{$bus_modules}, @{$hwmon_modules})) . "\n" ++ . "#----cut here----\n\n"; ++ } ++ ++ if ($have_conffiles_created) { ++ printf "\nNote: You only have created the required configuration to autoload the\n" ++ . "required modules to use your sensors on boot. If you want to start using\n" ++ . "your sensors right now you have to either load them now once manually, to\n" ++ . "reboot this system or to execute the following command(s):\n\n"; ++ ++ if ($systemd_is_booted) { ++ print " # systemctl restart systemd-modules-load\n\n" + } else { +- print "You should now start the lm_sensors service to load the required\n". +- "kernel modules.\n\n"; +- } +- } else { +- print "To load everything that is needed, add this to one of the system\n". +- "initialization scripts (e.g. /etc/rc.d/rc.local):\n\n"; +- print "#----cut here----\n"; +- if (@{$bus_modules}) { +- print "# Adapter drivers\n"; +- print "modprobe $_\n" foreach (@{$bus_modules}); ++ print " # /etc/init.d/modules-load restart\n\n" + } +- print "# Chip drivers\n"; +- print "modprobe $_\n" foreach (@{$hwmon_modules}); +- print((-e '/usr/bin/sensors' ? +- "/usr/bin/sensors -s\n" : +- "/usr/local/bin/sensors -s\n"). +- "#----cut here----\n\n"); +- +- print "You really should try these commands right now to make sure everything\n". +- "is working properly. Monitoring programs won't work until the needed\n". +- "modules are loaded.\n\n"; ++ } ++ else { ++ print "\nNote: Please make sure the following modules are loaded when you\n" ++ . "want to make use of your sensors:\n\n"; ++ ++ print " " . join(" ", (@{$bus_modules}, @{$hwmon_modules})) . "\n\n"; + } + } + +-- +2.9.3 + + +From 59680d1fd41402efb547ca75ad8397089df2e059 Mon Sep 17 00:00:00 2001 +From: Thomas Deutschmann <whissi@gentoo.org> +Date: Mon, 29 Aug 2016 12:47:50 +0200 +Subject: [PATCH 3/3] sensors-detect: Add Gentoo config file protection + +Per default we don't modify live config file. Instead we create +"._cfg0000_<filename>" files known from emerge when using CONFIG PROTECT. + +See CONFIGURATION FILES section of emerge(1) man page for details. + +Can be disabled using the "--no-gentoo-config-protect" parameter. +--- + prog/detect/sensors-detect | 51 +++++++++++++++++++++++++++++++++++++++++++--- + 1 file changed, 48 insertions(+), 3 deletions(-) + +diff --git a/prog/detect/sensors-detect b/prog/detect/sensors-detect +index bb5ae0f..2cc8f88 100755 +--- a/prog/detect/sensors-detect ++++ b/prog/detect/sensors-detect +@@ -7093,7 +7093,7 @@ sub write_config + mkdir('/etc/modprobe.d', 0755) + or die "Sorry, can't create /etc/modprobe.d ($!)"; + } +- open(local *MODPROBE_D, ">", $have_modprobe_d . '/lm_sensors.conf') ++ open(local *MODPROBE_D, ">", gentoo_get_protected_file($have_modprobe_d . '/lm_sensors.conf')) + or die "Sorry, can't create /etc/modprobe.d/lm_sensors.conf ($!)"; + print MODPROBE_D "# Generated by sensors-detect on " . scalar localtime() . "\n"; + print MODPROBE_D $configfile; +@@ -7134,7 +7134,7 @@ sub write_config + or die "Sorry, can't create '$modulesload_filedir' ($!)"; + } + +- open(my $fh, '>', $modulesload_file) ++ open(my $fh, '>', gentoo_get_protected_file($modulesload_file)) + or die "Sorry, can't open '$modulesload_file' for writing! ($!)"; + + print $fh $modulesload_cfg; +@@ -7152,10 +7152,17 @@ sub write_config + } + + if ($have_conffiles_created) { ++ if (!$opt{no_gentoo_config_protect}) { ++ print "\n * IMPORTANT: At least $have_conffiles_created config file(s) in '/etc' need updating.\n" ++ . " * See the CONFIGURATION FILES and CONFIGURATION FILES UPDATE TOOLS\n" ++ . " * sections of the emerge man page to learn how to update config files.\n"; ++ } ++ + printf "\nNote: You only have created the required configuration to autoload the\n" + . "required modules to use your sensors on boot. If you want to start using\n" + . "your sensors right now you have to either load them now once manually, to\n" +- . "reboot this system or to execute the following command(s):\n\n"; ++ . "reboot this system or to execute the following command(s)\%s:\n\n", ++ ($opt{no_gentoo_config_protect} ? "" : " _AFTER_\nyou have updated your config files"); + + if ($systemd_is_booted) { + print " # systemctl restart systemd-modules-load\n\n" +@@ -7171,6 +7178,32 @@ sub write_config + } + } + ++sub gentoo_get_protected_file ++{ ++ my ($file) = @_; ++ ++ if ($opt{no_gentoo_config_protect}) { ++ return $file; ++ } ++ ++ my $basename = basename($file); ++ my $dirname = dirname($file); ++ ++ my $protected_file; ++ for (my $prot_num = 0; $prot_num <= 9999; $prot_num++) { ++ $protected_file = sprintf('%s/._cfg%s_%s', ++ $dirname, ++ sprintf("%0*d", 4, $prot_num), ++ $basename); ++ ++ if (! -f $protected_file) { ++ return $protected_file; ++ } ++ } ++ ++ die "Running out of files -- cannot create protected file '$file'" ++} ++ + sub main + { + my ($input, $superio_features); +@@ -7181,6 +7214,8 @@ sub main + $opt{stat} = 1; + } elsif ($ARGV[0] eq "--auto") { + $opt{auto} = 1; ++ } elsif ($ARGV[0] eq "--no-gentoo-config-protect") { ++ $opt{no_gentoo_config_protect} = 1; + } else { + print STDERR "Error: unknown option $ARGV[0]\n"; + exit 1; +@@ -7234,6 +7269,16 @@ sub main + "unless you know what you're doing.\n\n"; + } + ++ if (!$opt{no_gentoo_config_protect}) { ++ print "Gentoo config file protection is active. Every file this program will\n", ++ "modify must be merged before the change will become active using\n", ++ "default Gentoo tools such as dispatch-conf, cfg-update, and etc-update.\n\n"; ++ } ++ else { ++ print "Gentoo config file protection is _disabled_. This program will modify\n", ++ "your active configuration without backups.\n\n"; ++ } ++ + print "Some south bridges, CPUs or memory controllers contain embedded sensors.\n". + "Do you want to scan for them? This is totally safe. (YES/no): "; + $input = read_answer(); +-- +2.9.3 + |