summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat (limited to 'app-admin/webmin/webmin-1.953.ebuild')
-rw-r--r--app-admin/webmin/webmin-1.953.ebuild309
1 files changed, 309 insertions, 0 deletions
diff --git a/app-admin/webmin/webmin-1.953.ebuild b/app-admin/webmin/webmin-1.953.ebuild
new file mode 100644
index 0000000..6d02e04
--- /dev/null
+++ b/app-admin/webmin/webmin-1.953.ebuild
@@ -0,0 +1,309 @@
+# Copyright 1999-2016 Gentoo Foundation
+# Distributed under the terms of the GNU General Public License v2
+# $Id$
+
+EAPI="5"
+
+inherit eutils pam ssl-cert systemd
+
+DESCRIPTION="A web-based Unix systems administration interface"
+HOMEPAGE="http://www.webmin.com/"
+SRC_URI="minimal? ( mirror://sourceforge/webadmin/${P}-minimal.tar.gz )
+ !minimal? ( mirror://sourceforge/webadmin/${P}.tar.gz )"
+
+LICENSE="BSD GPL-2"
+SLOT="0"
+
+KEYWORDS="amd64 x86"
+
+# NOTE: The ssl flag auto added by ssl-cert eclass is not used actually
+# because openssl is forced by dev-perl/Net-SSLeay
+IUSE="minimal +ssl mysql postgres ldap"
+REQUIRED_USE="minimal? ( !mysql !postgres !ldap )"
+
+# All the required perl modules can be found easily using (in Webmin's root src dir):
+# find . -name cpan_modules.pl -exec grep "::" {} \;
+# NOTE: If Webmin doesn't find the required perl modules, it offers(runtime) the user
+# to install them using the in-built cpan module, and this will mess up perl on the system
+# That's why some modules are forced without a use flag
+# NOTE: pam, ssl and dnssec-tools deps are forced for security and Gentoo compliance installation reasons
+DEPEND="virtual/perl-MIME-Base64
+ virtual/perl-Socket
+ virtual/perl-Sys-Syslog
+ virtual/perl-Time-HiRes
+ virtual/perl-Time-Local
+ dev-perl/Authen-Libwrap
+ dev-perl/IO-Tty
+ dev-perl/MD5
+ dev-perl/Net-SSLeay
+ dev-perl/Authen-PAM
+ dev-perl/Sys-Hostname-Long
+ >=net-dns/dnssec-tools-1.13
+ !minimal? (
+ mysql? ( dev-perl/DBD-mysql )
+ postgres? ( dev-perl/DBD-Pg )
+ ldap? ( dev-perl/perl-ldap )
+ dev-perl/XML-Generator
+ dev-perl/XML-Parser
+ )"
+RDEPEND="${DEPEND}"
+
+src_prepare() {
+ local perl="$( which perl )"
+
+ # Remove the unnecessary and incompatible files
+ rm -rf acl/Authen-SolarisRBAC-0.1*
+ if ! use minimal ; then
+ rm -rf {format,{bsd,hpux,sgi}exports,zones,rbac}
+ rm -f mount/{free,net,open}bsd-mounts*
+ rm -f mount/macos-mounts*
+ fi
+
+ # For security reasons remove the SSL certificate that comes with Webmin
+ # We will create our own later
+ rm -f miniserv.pem
+
+ # Remove the Webmin setup scripts to avoid Webmin in runtime to mess up config
+ # We will use our own later
+ rm -f setup.{sh,pl}
+
+ # Set the installation type/mode to Gentoo
+ echo "gentoo" > install-type
+
+ # Fix the permissions of the install files
+ chmod -R og-w "${S}"
+
+ # Since we should not modify any files after install
+ # we set the perl path in all cgi and pl files here using Webmin's routines
+ # The pl file is Prefix safe and works only on provided input, no other filesystem files
+ ebegin "Fixing perl path in source files"
+ (find "${S}" -name '*.cgi' -print ; find "${S}" -name '*.pl' -print) | $perl "${S}"/perlpath.pl $perl -
+ eend $?
+}
+
+src_install() {
+ # Create config dir and keep
+ diropts -m0755
+ dodir /etc/webmin
+ keepdir /etc/webmin
+
+ # Create install dir
+ # Third party modules installed through Webmin go here too, so keep
+ dodir /usr/libexec/webmin
+ keepdir /usr/libexec/webmin
+
+ # Copy our own setup script to installation folder
+ insinto /usr/libexec/webmin
+ newins "${FILESDIR}"/gentoo-setup gentoo-setup.sh
+ fperms 0744 /usr/libexec/webmin/gentoo-setup.sh
+
+ # This is here if we ever want in future ebuilds to add some specific
+ # config values in the /etc/webmin/miniserv.conf
+ # The format of this file should be the same as the one of miniserv.conf:
+ # var=value
+ #
+ # Uncomment it if you use such file. Before that check if upstream
+ # has this file in root dir too.
+ #newins "${FILESDIR}/miniserv-conf" miniserv-conf
+
+ # Create the log dir and keep
+ diropts -m0700
+ dodir /var/log/webmin
+ keepdir /var/log/webmin
+
+ # Create the init.d file and put the neccessary variables there
+ newinitd "${FILESDIR}"/init.d.webmin webmin
+ sed -i \
+ -e "s:%exe%:${EROOT}usr/libexec/webmin/miniserv.pl:" \
+ -e "s:%pid%:${EROOT}var/run/webmin.pid:" \
+ -e "s:%conf%:${EROOT}etc/webmin/miniserv.conf:" \
+ -e "s:%config%:${EROOT}etc/webmin/config:" \
+ -e "s:%perllib%:${EROOT}usr/libexec/webmin:" \
+ "${ED}etc/init.d/webmin" \
+ || die "Failed to patch the webmin init file"
+
+ # Create the systemd service file and put the neccessary variables there
+ systemd_newunit "${FILESDIR}"/webmin.service webmin.service
+ sed -i \
+ -e "s:%exe%:${EROOT}usr/libexec/webmin/miniserv.pl:" \
+ -e "s:%pid%:${EROOT}var/run/webmin.pid:" \
+ -e "s:%conf%:${EROOT}etc/webmin/miniserv.conf:" \
+ -e "s:%config%:${EROOT}etc/webmin/config:" \
+ -e "s:%perllib%:${EROOT}usr/libexec/webmin:" \
+ "${ED}$(_systemd_get_systemunitdir)/webmin.service" \
+ || die "Failed to patch the webmin systemd service file"
+
+ # Setup pam
+ pamd_mimic system-auth webmin auth account session
+
+ # Copy files to installation folder
+ ebegin "Copying install files to destination"
+ cp -pPR "${S}"/* "${ED}usr/libexec/webmin"
+ eend $?
+}
+
+pkg_preinst() {
+ # First stop service if running so Webmin to not messup our config
+ ebegin "Stopping any running Webmin instance prior merging"
+ if systemd_is_booted ; then
+ systemctl stop webmin.service 2>/dev/null
+ else
+ rc-service --ifexists -- webmin --ifstarted stop
+ fi
+ eend $?
+}
+
+pkg_postinst() {
+ # Run pkg_config phase first - non interactively
+ export INTERACTIVE="no"
+ pkg_config
+ # Every next time pkg_config should be interactive
+ INTERACTIVE="yes"
+
+ ewarn
+ ewarn "Bare in mind that not all Webmin modules are Gentoo tweaked and may have some issues."
+ ewarn "Always be careful when using modules that modify init entries, do update of webmin, install CPAN modules etc."
+ ewarn "To avoid problems, please before using any module, look at its configuration options first."
+ ewarn "(Usually there is a link at top in the right pane of Webmin for configuring the module.)"
+ ewarn
+ if systemd_is_booted ; then
+ elog "- To make Webmin start at boot time, run: 'systemctl enable webmin.service'"
+ else
+ elog "- To make Webmin start at boot time, run: 'rc-update add webmin default'"
+ fi
+ elog "- The default URL to connect to Webmin is: https://localhost:10000"
+ elog "- The default user that can login is: root"
+ elog "- To reconfigure Webmin in case of problems run 'emerge --config app-admin/webmin'"
+}
+
+pkg_prerm() {
+ # First stop service if running - we do not want Webmin to mess up config
+ ebegin "Stopping any running Webmin instance prior unmerging"
+ if systemd_is_booted ; then
+ systemctl stop webmin.service 2>/dev/null
+ else
+ rc-service --ifexists -- webmin --ifstarted stop
+ fi
+ eend $?
+}
+
+pkg_postrm() {
+ # If removing webmin completely, remind the user for the Webmin's own cron jobs.
+ if [[ ! ${REPLACED_BY_VERSION} ]]; then
+ ewarn
+ ewarn "You have uninstalled Webmin, so have in mind that all cron jobs scheduled"
+ ewarn "by Webmin for its own modules, are left active and they will fail when Webmin is missing."
+ ewarn "To fix this just disable them if you intend to use Webmin again,"
+ ewarn "OR delete them if not."
+ ewarn
+ fi
+}
+
+pkg_config(){
+ # First stop service if running
+ ebegin "Stopping any running Webmin instance"
+ if systemd_is_booted ; then
+ systemctl stop webmin.service 2>/dev/null
+ else
+ rc-service --ifexists -- webmin --ifstarted stop
+ fi
+ eend $?
+
+ # Next set the default reset variable to 'none'
+ # reset/_reset can be:
+ # 'none' - does not reset anything, just upgrades if a conf is present
+ # OR installs new conf if a conf is missing
+ # 'soft' - deletes only $config_dir/config file and thus resetting most
+ # conf values to their defaults. Keeps the specific Webmin cron jobs
+ # 'hard' - deletes all files in $config_dir (keeping the .keep_* Gentoo file)
+ # and thus resetting all Webmin. Deletes the specific Webmin cron jobs too.
+ local _reset="none"
+
+ # If in interactive mode ask user what should we do
+ if [[ "${INTERACTIVE}" = "yes" ]]; then
+ einfo
+ einfo "Please enter the number of the action you would like to perform?"
+ einfo
+ einfo "1. Update configuration"
+ einfo " (keeps old config options and adds the new ones)"
+ einfo "2. Soft reset configuration"
+ einfo " (keeps some old config options, the other options are set to default)"
+ ewarn " All Webmin users will be reset"
+ einfo "3. Hard reset configuration"
+ einfo " (all options including module options are set to default)"
+ ewarn " You will lose all Webmin configuration options you have done till now"
+ einfo "4. Exit this configuration utility (default)"
+ while [ "$correct" != "true" ] ; do
+ read answer
+ if [[ "$answer" = "1" ]] ; then
+ _reset="none"
+ correct="true"
+ elif [[ "$answer" = "2" ]] ; then
+ _reset="soft"
+ correct="true"
+ elif [[ "$answer" = "3" ]] ; then
+ _reset="hard"
+ correct="true"
+ elif [ "$answer" = "4" -o "$answer" = "" ] ; then
+ die "User aborted configuration."
+ else
+ echo "Answer not recognized. Enter a number from 1 to 4"
+ fi
+ done
+
+ if [[ "$_reset" = "hard" ]]; then
+ while [ "$sure" != "true" ] ; do
+ ewarn "You will lose all Webmin configuration options you have done till now."
+ ewarn "Are you sure you want to do this? (y/n)"
+ read answer
+ if [[ $answer =~ ^[Yy]([Ee][Ss])?$ ]] ; then
+ sure="true"
+ elif [[ $answer =~ ^[Nn]([Oo])?$ ]] ; then
+ die "User aborted configuration."
+ else
+ echo "Answer not recognized. Enter 'y' or 'n'"
+ fi
+ done
+ fi
+ fi
+
+ export reset=$_reset
+
+ # Create ssl certificate for Webmin if there is not one in the proper place
+ if [[ ! -e "${EROOT}etc/ssl/webmin/server.pem" ]]; then
+ SSL_ORGANIZATION="${SSL_ORGANIZATION:-Webmin Server}"
+ SSL_COMMONNAME="${SSL_COMMONNAME:-*}"
+ install_cert "${EROOT}/etc/ssl/webmin/server"
+ fi
+
+ # Ensure all paths passed to the setup script use EROOT
+ export wadir="${EROOT}usr/libexec/webmin"
+ export config_dir="${EROOT}etc/webmin"
+ export var_dir="${EROOT}var/log/webmin"
+ export tempdir="${T}"
+ export pidfile="${EROOT}var/run/webmin.pid"
+ export perl="$( which perl )"
+ export os_type='gentoo-linux'
+ export os_version='*'
+ export real_os_type='Gentoo Linux'
+ export real_os_version='Any version'
+ # Forcing 'ssl', 'no_ssl2', 'no_ssl3', 'ssl_redirect', 'no_sslcompression',
+ # 'ssl_honorcipherorder', 'no_tls1' and 'no_tls1_1' for tightening security
+ export ssl=1
+ export no_ssl2=1
+ export no_ssl3=1
+ export ssl_redirect=1
+ export ssl_honorcipherorder=1
+ export no_sslcompression=1
+ export no_tls1=1
+ export no_tls1_1=1
+ export keyfile="${EROOT}etc/ssl/webmin/server.pem"
+ export port=10000
+
+ export atboot=0
+
+ einfo "Executing Webmin's configure script"
+ $wadir/gentoo-setup.sh
+
+ einfo "Configuration of Webmin done"
+}