x11-base/xorg-server: clean out older versions.

7 files changed, 0 insertions, 1105 deletions

diff --git a/x11-base/xorg-server/files/xdm.initd-10 b/x11-base/xorg-server/files/xdm.initd-10
deleted file mode 100644
index 9826e6bb..00000000
--- a/x11-base/xorg-server/files/xdm.initd-10
+++ /dev/null
@@ -1,226 +0,0 @@
-#!/sbin/runscript
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License, v2
-# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-server/files/xdm.initd-10,v 1.1 2013/09/26 15:23:33 axs Exp $
-
-# This is here to serve as a note to myself, and future developers.
-#
-# Any Display manager (gdm,kdm,xdm) has the following problem:  if
-# it is started before any getty, and no vt is specified, it will
-# usually run on vt2.  When the getty on vt2 then starts, and the
-# DM is already started, the getty will take control of the keyboard,
-# leaving us with a "dead" keyboard.
-#
-# Resolution: add the following line to /etc/inittab
-#
-#  x:a:once:/etc/X11/startDM.sh
-#
-# and have /etc/X11/startDM.sh start the DM in daemon mode if
-# a lock is present (with the info of what DM should be started),
-# else just fall through.
-#
-# How this basically works, is the "a" runlevel is a additional
-# runlevel that you can use to fork processes with init, but the
-# runlevel never gets changed to this runlevel.  Along with the "a"
-# runlevel, the "once" key word means that startDM.sh will only be
-# run when we specify it to run, thus eliminating respawning
-# startDM.sh when "xdm" is not added to the default runlevel, as was
-# done previously.
-#
-# This script then just calls "telinit a", and init will run
-# /etc/X11/startDM.sh after the current runlevel completes (this
-# script should only be added to the actual runlevel the user is
-# using).
-#
-# Martin Schlemmer
-# aka Azarah
-# 04 March 2002
-
-depend() {
-	need localmount xdm-setup
-
-	# this should start as early as possible
-	# we can't do 'before *' as that breaks it
-	# (#139824) Start after ypbind and autofs for network authentication
-	# (#145219 #180163) Could use lirc mouse as input device
-	# (#70689 comment #92) Start after consolefont to avoid display corruption
-	# (#291269) Start after quota, since some dm need readable home
-	# (#390609) gdm-3 will fail when dbus is not running
-	# (#366753) starting keymaps after X causes problems
-	after bootmisc consolefont modules netmount
-	after readahead-list ypbind autofs openvpn gpm lircmd
-	after quota keymaps
-	before alsasound
-
-	# Start before X
-	use consolekit dbus xfs
-}
-
-setup_dm() {
-	local MY_XDM
-	
-	MY_XDM=$(echo "${DISPLAYMANAGER}" | tr '[:upper:]' '[:lower:]')
-
-	# Load our root path from profile.env
-	# Needed for kdm
-	PATH=${PATH}:$(. /etc/profile.env; echo "${ROOTPATH}")
-
-	NAME=
-	case "${MY_XDM}" in
-		kdm|kde)
-			EXE=/usr/bin/kdm
-			PIDFILE=/run/kdm.pid
-			;;
-		entrance*)
-			EXE=/usr/sbin/entrance
-			PIDFILE=/run/entrance.pid
-			;;
-		gdm|gnome)
-			# gdm-3 and above has different paths
-			if [ -f /usr/sbin/gdm ]; then
-				EXE=/usr/sbin/gdm
-				PIDFILE=/run/gdm/gdm.pid
-				START_STOP_ARGS="--background"
-				AUTOCLEAN_CGROUP="yes"
-			else
-				EXE=/usr/bin/gdm
-				PIDFILE=/run/gdm.pid
-			fi
-			[ "${RC_UNAME}" != "Linux" ] && NAME=gdm-binary
-			;;
-		wdm)
-			EXE=/usr/bin/wdm
-			PIDFILE=
-			;;
-		gpe)
-			EXE=/usr/bin/gpe-dm
-			PIDFILE=/run/gpe-dm.pid
-			;;
-		lxdm)
-			EXE=/usr/sbin/lxdm-binary
-			PIDFILE=/run/lxdm.pid
-			START_STOP_ARGS="--background"
-			;;
-		lightdm)
-			EXE=/usr/sbin/lightdm
-			PIDFILE=/run/lightdm.pid
-			START_STOP_ARGS="--background"
-			;;
-		*)
-			# first find out if there is such executable
-			EXE="$(command -v ${MY_XDM} 2>/dev/null)"
-			PIDFILE="/run/${MY_XDM}.pid"
-
-			# warn user that he is doing sick things if the exe was not found
-			if [ -z "${EXE}" ]; then
-				echo "ERROR: Your XDM value is invalid."
-				echo "  No ${MY_XDM} executable could be found on your system."
-			fi
-			;;
-	esac
-
-	if ! [ -x "${EXE}" ]; then
-		EXE=/usr/bin/xdm
-		PIDFILE=/run/xdm.pid
-		if ! [ -x "/usr/bin/xdm" ]; then
-			echo "ERROR: Please set your DISPLAYMANAGER variable in /etc/conf.d/xdm,"
-			echo "	or install x11-apps/xdm package"
-			eend 255
-		fi
-	fi
-}
-
-# Check to see if something is defined on our VT
-vtstatic() {
-	if [ -e /etc/inittab ] ; then
-		grep -Eq "^[^#]+.*\<tty$1\>" /etc/inittab
-	elif [ -e /etc/ttys ] ; then
-		grep -q "^ttyv$(($1 - 1))" /etc/ttys
-	else
-		return 1
-	fi
-}
-
-start() {
-	local EXE NAME PIDFILE AUTOCLEAN_CGROUP
-	setup_dm
-
-	if [ -f /etc/.noxdm ]; then
-		einfo "Skipping ${EXE##*/}, /etc/.noxdm found or \"nox\" bootparam passed."
-		rm /etc/.noxdm
-		return 0
-	fi
-
-	ebegin "Setting up ${EXE##*/}"
-
-	# save the prefered DM
-	save_options "service" "${EXE}"
-	save_options "name"    "${NAME}"
-	save_options "pidfile" "${PIDFILE}"
-	save_options "start_stop_args" "${START_STOP_ARGS}"
-	save_options "autoclean_cgroup" "${AUTOCLEAN_CGROUP:-no}"
-
-	if [ -n "${CHECKVT-y}" ] ; then
-		if vtstatic "${CHECKVT:-7}" ; then
-			if [ -x /sbin/telinit ] && [ "${SOFTLEVEL}" != "BOOT" ] && [ "${RC_SOFTLEVEL}" != "BOOT" ]; then
-				ewarn "Something is already defined on VT ${CHECKVT:-7}, will start X later"
-				telinit a >/dev/null 2>&1
-				return 0
-			else
-				eerror "Something is already defined on VT ${CHECKVT:-7}, not starting"
-				return 1
-			fi
-		fi
-	fi
-
-	/etc/X11/startDM.sh
-	eend 0
-}
-
-stop() {
-	local curvt retval
-
-	retval=0
-	if [ -t 0 ]; then
-		if type fgconsole >/dev/null 2>&1; then
-			curvt=$(fgconsole 2>/dev/null)
-		else
-			curvt=$(tty)
-			case "${curvt}" in
-				/dev/ttyv[0-9]*) curvt=${curvt#/dev/ttyv} ;;
-				*) curvt= ;;
-			esac
-		fi
-	fi
-	local myexe myname mypidfile myservice
-	myexe=$(get_options "service")
-	myname=$(get_options "name")
-	mypidfile=$(get_options "pidfile")
-	myservice=${myexe##*/}
-	yesno "${rc_cgroup_cleanup:-no}" || rc_cgroup_cleanup=$(get_options "autoclean_cgroup")
-
-	[ -z "${myexe}" ] && return 0
-
-	ebegin "Stopping ${myservice}"
-
-	if start-stop-daemon --quiet --test --stop --exec "${myexe}"; then
-		start-stop-daemon --stop --exec "${myexe}" --retry TERM/5/TERM/5 \
-			${mypidfile:+--pidfile} ${mypidfile} \
-			${myname:+--name} ${myname}
-		retval=${?}
-	fi
-
-	# switch back to original vt
-	if [ -n "${curvt}" ]; then
-		if type chvt >/dev/null 2>&1; then
-			chvt "${curvt}"
-		else
-			vidcontrol -s "$((curvt + 1))"
-		fi
-	fi
-
-	eend ${retval} "Error stopping ${myservice}"
-	return ${retval}
-}
-
-# vim: set ts=4 :
diff --git a/x11-base/xorg-server/files/xorg-server-1.12-cve-2013-4396.patch b/x11-base/xorg-server/files/xorg-server-1.12-cve-2013-4396.patch
deleted file mode 100644
index 4b6727e6..00000000
--- a/x11-base/xorg-server/files/xorg-server-1.12-cve-2013-4396.patch
+++ /dev/null
@@ -1,75 +0,0 @@
-From 7bddc2ba16a2a15773c2ea8947059afa27727764 Mon Sep 17 00:00:00 2001
-From: Alan Coopersmith <alan.coopersmith@oracle.com>
-Date: Mon, 16 Sep 2013 21:47:16 -0700
-Subject: [PATCH] Avoid use-after-free in dix/dixfonts.c: doImageText()
- [CVE-2013-4396]
-
-Save a pointer to the passed in closure structure before copying it
-and overwriting the *c pointer to point to our copy instead of the
-original.  If we hit an error, once we free(c), reset c to point to
-the original structure before jumping to the cleanup code that
-references *c.
-
-Since one of the errors being checked for is whether the server was
-able to malloc(c->nChars * itemSize), the client can potentially pass
-a number of characters chosen to cause the malloc to fail and the
-error path to be taken, resulting in the read from freed memory.
-
-Since the memory is accessed almost immediately afterwards, and the
-X server is mostly single threaded, the odds of the free memory having
-invalid contents are low with most malloc implementations when not using
-memory debugging features, but some allocators will definitely overwrite
-the memory there, leading to a likely crash.
-
-Reported-by: Pedro Ribeiro <pedrib@gmail.com>
-Signed-off-by: Alan Coopersmith <alan.coopersmith@oracle.com>
-Reviewed-by: Julien Cristau <jcristau@debian.org>
----
- dix/dixfonts.c |    5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/dix/dixfonts.c b/dix/dixfonts.c
-index feb765d..2e34d37 100644
---- a/dix/dixfonts.c
-+++ b/dix/dixfonts.c
-@@ -1425,6 +1425,7 @@ doImageText(ClientPtr client, ITclosurePtr c)
-             GC *pGC;
-             unsigned char *data;
-             ITclosurePtr new_closure;
-+            ITclosurePtr old_closure;
- 
-             /* We're putting the client to sleep.  We need to
-                save some state.  Similar problem to that handled
-@@ -1436,12 +1437,14 @@ doImageText(ClientPtr client, ITclosurePtr c)
-                 err = BadAlloc;
-                 goto bail;
-             }
-+            old_closure = c;
-             *new_closure = *c;
-             c = new_closure;
- 
-             data = malloc(c->nChars * itemSize);
-             if (!data) {
-                 free(c);
-+                c = old_closure;
-                 err = BadAlloc;
-                 goto bail;
-             }
-@@ -1452,6 +1455,7 @@ doImageText(ClientPtr client, ITclosurePtr c)
-             if (!pGC) {
-                 free(c->data);
-                 free(c);
-+                c = old_closure;
-                 err = BadAlloc;
-                 goto bail;
-             }
-@@ -1464,6 +1468,7 @@ doImageText(ClientPtr client, ITclosurePtr c)
-                 FreeScratchGC(pGC);
-                 free(c->data);
-                 free(c);
-+                c = old_closure;
-                 err = BadAlloc;
-                 goto bail;
-             }
--- 
-1.7.9.2
diff --git a/x11-base/xorg-server/files/xorg-server-1.12-disable-acpi.patch b/x11-base/xorg-server/files/xorg-server-1.12-disable-acpi.patch
deleted file mode 100644
index df43dbde..00000000
--- a/x11-base/xorg-server/files/xorg-server-1.12-disable-acpi.patch
+++ /dev/null
@@ -1,11 +0,0 @@
-diff -ur a/configure.ac b/configure.ac
---- a/configure.ac	2011-10-31 19:40:02.000000000 +0100
-+++ b/configure.ac	2011-10-31 19:41:02.372745481 +0100
-@@ -1624,7 +1624,6 @@
- 		  	linux_alpha=yes
- 			;;
- 		  i*86|amd64*|x86_64*|ia64*)
--			linux_acpi="yes"
- 			;;
- 		  *)
- 			;;
diff --git a/x11-base/xorg-server/files/xorg-server-disable-acpi.patch b/x11-base/xorg-server/files/xorg-server-disable-acpi.patch
deleted file mode 100644
index cc80e6ce..00000000
--- a/x11-base/xorg-server/files/xorg-server-disable-acpi.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From a8079882f1884edc62a9de28af915bd8b65dfbbe Mon Sep 17 00:00:00 2001
-From: Adam Jackson <ajax@redhat.com>
-Date: Wed, 11 Mar 2009 14:02:11 -0400
-Subject: [PATCH] Don't build the ACPI code.
-
-No good can come of this.
----
- configure.ac |    2 --
- 1 files changed, 0 insertions(+), 2 deletions(-)
-
-diff --git a/configure.ac b/configure.ac
-index 72ae67e..04716f8 100644
---- a/configure.ac
-+++ b/configure.ac
-@@ -1269,13 +1269,11 @@ if test "x$XORG" = xyes; then
- 		case $host_cpu in
- 		  ia64*)
- 			linux_ia64=yes
--			linux_acpi="yes"
- 			;;
- 		  alpha*)
- 		  	linux_alpha=yes
- 			;;
- 		  i*86|amd64*|x86_64*)
--			linux_acpi="yes"
- 			;;
- 		  *)
- 			;;
--- 
-1.6.1.3
-
diff --git a/x11-base/xorg-server/xorg-server-1.14.3-r99.ebuild b/x11-base/xorg-server/xorg-server-1.14.3-r99.ebuild
deleted file mode 100644
index 217b33cc..00000000
--- a/x11-base/xorg-server/xorg-server-1.14.3-r99.ebuild
+++ /dev/null
@@ -1,251 +0,0 @@
-# Copyright 1999-2013 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-server/xorg-server-1.14.3-r2.ebuild,v 1.10 2013/10/22 07:36:05 ago Exp $
-
-EAPI=5
-
-XORG_DOC=doc
-# avoid maintainer mode, bug #484634
-XORG_EAUTORECONF=yes
-inherit xorg-2 multilib versionator flag-o-matic
-EGIT_REPO_URI="git://anongit.freedesktop.org/git/xorg/xserver"
-
-DESCRIPTION="X.Org X servers"
-SLOT="0/${PV}"
-KEYWORDS="amd64 arm ~mips ppc x86"
-
-IUSE_SERVERS="dmx kdrive xnest xorg xvfb"
-IUSE="${IUSE_SERVERS} ipv6 minimal nptl selinux +suid tslib +udev"
-
-RDEPEND=">=app-eselect/eselect-opengl-1.0.8
-	dev-libs/openssl
-	media-libs/freetype
-	>=x11-apps/iceauth-1.0.2
-	>=x11-apps/rgb-1.0.3
-	>=x11-apps/xauth-1.0.3
-	x11-apps/xkbcomp
-	>=x11-libs/libdrm-2.4.20
-	>=x11-libs/libpciaccess-0.12.901
-	>=x11-libs/libXau-1.0.4
-	>=x11-libs/libXdmcp-1.0.2
-	>=x11-libs/libXfont-1.4.2
-	>=x11-libs/libxkbfile-1.0.4
-	>=x11-libs/pixman-0.27.2
-	>=x11-libs/xtrans-1.2.2
-	>=x11-misc/xbitmaps-1.0.1
-	>=x11-misc/xkeyboard-config-2.4.1-r3
-	dmx? (
-		x11-libs/libXt
-		>=x11-libs/libdmx-1.0.99.1
-		>=x11-libs/libX11-1.1.5
-		>=x11-libs/libXaw-1.0.4
-		>=x11-libs/libXext-1.0.99.4
-		>=x11-libs/libXfixes-5.0
-		>=x11-libs/libXi-1.2.99.1
-		>=x11-libs/libXmu-1.0.3
-		x11-libs/libXrender
-		>=x11-libs/libXres-1.0.3
-		>=x11-libs/libXtst-1.0.99.2
-	)
-	kdrive? (
-		>=x11-libs/libXext-1.0.5
-		x11-libs/libXv
-	)
-	!minimal? (
-		>=x11-libs/libX11-1.1.5
-		>=x11-libs/libXext-1.0.5
-		>=media-libs/mesa-8[nptl=]
-	)
-	tslib? ( >=x11-libs/tslib-1.0 )
-	udev? ( >=virtual/udev-150 )
-	>=x11-apps/xinit-1.3
-	selinux? ( sec-policy/selinux-xserver )"
-
-DEPEND="${RDEPEND}
-	sys-devel/flex
-	>=x11-proto/bigreqsproto-1.1.0
-	>=x11-proto/compositeproto-0.4
-	>=x11-proto/damageproto-1.1
-	>=x11-proto/fixesproto-5.0
-	>=x11-proto/fontsproto-2.0.2
-	>=x11-proto/glproto-1.4.16
-	>=x11-proto/inputproto-2.2.99.1
-	>=x11-proto/kbproto-1.0.3
-	>=x11-proto/randrproto-1.4.0
-	>=x11-proto/recordproto-1.13.99.1
-	>=x11-proto/renderproto-0.11
-	>=x11-proto/resourceproto-1.2.0
-	>=x11-proto/scrnsaverproto-1.1
-	>=x11-proto/trapproto-3.4.3
-	>=x11-proto/videoproto-2.2.2
-	>=x11-proto/xcmiscproto-1.2.0
-	>=x11-proto/xextproto-7.1.99
-	>=x11-proto/xf86dgaproto-2.0.99.1
-	>=x11-proto/xf86rushproto-1.1.2
-	>=x11-proto/xf86vidmodeproto-2.2.99.1
-	>=x11-proto/xineramaproto-1.1.3
-	>=x11-proto/xproto-7.0.22
-	dmx? (
-		>=x11-proto/dmxproto-2.2.99.1
-		doc? (
-			|| (
-				www-client/links
-				www-client/lynx
-				www-client/w3m
-			)
-		)
-	)
-	!minimal? (
-		>=x11-proto/xf86driproto-2.1.0
-		>=x11-proto/dri2proto-2.8
-	)"
-
-PDEPEND="
-	xorg? ( >=x11-base/xorg-drivers-$(get_version_component_range 1-2) )"
-
-REQUIRED_USE="!minimal? (
-		|| ( ${IUSE_SERVERS} )
-	)"
-
-#UPSTREAMED_PATCHES=(
-#	"${WORKDIR}/patches/"
-#)
-
-PATCHES=(
-	"${UPSTREAMED_PATCHES[@]}"
-	"${FILESDIR}"/${PN}-1.12-disable-acpi.patch
-	"${FILESDIR}"/${PN}-1.12-ia64-fix_inx_outx.patch
-	"${FILESDIR}"/${PN}-1.12-unloadsubmodule.patch
-	"${FILESDIR}"/${PN}-1.12-cve-2013-4396.patch
-	"${FILESDIR}"/${PN}-1.14.3-musl.patch
-)
-
-pkg_pretend() {
-	# older gcc is not supported
-	[[ "${MERGE_TYPE}" != "binary" && $(gcc-major-version) -lt 4 ]] && \
-		die "Sorry, but gcc earlier than 4.0 will not work for xorg-server."
-}
-
-src_configure() {
-	# localstatedir is used for the log location; we need to override the default
-	#	from ebuild.sh
-	# sysconfdir is used for the xorg.conf location; same applies
-	# NOTE: fop is used for doc generating ; and i have no idea if gentoo
-	#	package it somewhere
-	XORG_CONFIGURE_OPTIONS=(
-		$(use_enable ipv6)
-		$(use_enable dmx)
-		$(use_enable kdrive)
-		$(use_enable kdrive kdrive-kbd)
-		$(use_enable kdrive kdrive-mouse)
-		$(use_enable kdrive kdrive-evdev)
-		$(use_enable suid install-setuid)
-		$(use_enable tslib)
-		$(use_enable !minimal record)
-		$(use_enable !minimal xfree86-utils)
-		$(use_enable !minimal install-libxf86config)
-		$(use_enable !minimal dri)
-		$(use_enable !minimal dri2)
-		$(use_enable !minimal glx)
-		$(use_enable xnest)
-		$(use_enable xorg)
-		$(use_enable xvfb)
-		$(use_enable nptl glx-tls)
-		$(use_enable udev config-udev)
-		$(use_with doc doxygen)
-		$(use_with doc xmlto)
-		--enable-libdrm
-		--sysconfdir="${EPREFIX}"/etc/X11
-		--localstatedir="${EPREFIX}"/var
-		--with-fontrootdir="${EPREFIX}"/usr/share/fonts
-		--with-xkb-output="${EPREFIX}"/var/lib/xkb
-		--disable-config-hal
-		--without-dtrace
-		--without-fop
-		--with-os-vendor=Gentoo
-	)
-
-	# Xorg-server requires includes from OS mesa which are not visible for
-	# users of binary drivers.
-	mkdir -p "${T}/mesa-symlinks/GL"
-	for i in gl glx glxmd glxproto glxtokens; do
-		ln -s "${EROOT}usr/$(get_libdir)/opengl/xorg-x11/include/$i.h" "${T}/mesa-symlinks/GL/$i.h" || die
-	done
-	for i in glext glxext; do
-		ln -s "${EROOT}usr/$(get_libdir)/opengl/global/include/$i.h" "${T}/mesa-symlinks/GL/$i.h" || die
-	done
-	append-cppflags "-I${T}/mesa-symlinks"
-
-	xorg-2_src_configure
-}
-
-src_install() {
-	xorg-2_src_install
-
-	dynamic_libgl_install
-
-	server_based_install
-
-	if ! use minimal &&	use xorg; then
-		# Install xorg.conf.example into docs
-		dodoc "${AUTOTOOLS_BUILD_DIR}"/hw/xfree86/xorg.conf.example
-	fi
-
-	newinitd "${FILESDIR}"/xdm-setup.initd-1 xdm-setup
-	newinitd "${FILESDIR}"/xdm.initd-10 xdm
-	newconfd "${FILESDIR}"/xdm.confd-4 xdm
-
-	# install the @x11-module-rebuild set for Portage
-	insinto /usr/share/portage/config/sets
-	newins "${FILESDIR}"/xorg-sets.conf xorg.conf
-}
-
-pkg_postinst() {
-	# sets up libGL and DRI2 symlinks if needed (ie, on a fresh install)
-	eselect opengl set xorg-x11 --use-old
-
-	if [[ ${PV} != 9999 && $(get_version_component_range 2 ${REPLACING_VERSIONS}) != $(get_version_component_range 2 ${PV}) ]]; then
-		ewarn "You must rebuild all drivers if upgrading from <xorg-server-$(get_version_component_range 1-2)"
-		ewarn "because the ABI changed. If you cannot start X because"
-		ewarn "of module version mismatch errors, this is your problem."
-
-		echo
-		ewarn "You can rebuild all installed packages in the x11-drivers"
-		ewarn "category using this command:"
-		ewarn "	emerge @x11-module-rebuild"
-	fi
-
-	if use udev && has_version virtual/udev[-keymap]; then
-		ewarn "virtual/udev was built without keymap support. This may cause input device"
-		ewarn "autoconfiguration to fail."
-	fi
-}
-
-pkg_postrm() {
-	# Get rid of module dir to ensure opengl-update works properly
-	if [[ -z ${REPLACED_BY_VERSION} && -e ${EROOT}/usr/$(get_libdir)/xorg/modules ]]; then
-		rm -rf "${EROOT}"/usr/$(get_libdir)/xorg/modules
-	fi
-}
-
-dynamic_libgl_install() {
-	# next section is to setup the dynamic libGL stuff
-	ebegin "Moving GL files for dynamic switching"
-		dodir /usr/$(get_libdir)/opengl/xorg-x11/extensions
-		local x=""
-		for x in "${ED}"/usr/$(get_libdir)/xorg/modules/extensions/lib{glx,dri,dri2}*; do
-			if [ -f ${x} -o -L ${x} ]; then
-				mv -f ${x} "${ED}"/usr/$(get_libdir)/opengl/xorg-x11/extensions
-			fi
-		done
-	eend 0
-}
-
-server_based_install() {
-	if ! use xorg; then
-		rm "${ED}"/usr/share/man/man1/Xserver.1x \
-			"${ED}"/usr/$(get_libdir)/xserver/SecurityPolicy \
-			"${ED}"/usr/$(get_libdir)/pkgconfig/xorg-server.pc \
-			"${ED}"/usr/share/man/man1/Xserver.1x
-	fi
-}
diff --git a/x11-base/xorg-server/xorg-server-1.15.0-r99.ebuild b/x11-base/xorg-server/xorg-server-1.15.0-r99.ebuild
deleted file mode 100644
index d6f7ab25..00000000
--- a/x11-base/xorg-server/xorg-server-1.15.0-r99.ebuild
+++ /dev/null
@@ -1,254 +0,0 @@
-# Copyright 1999-2014 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-server/xorg-server-1.15.0.ebuild,v 1.6 2014/03/28 01:51:18 jer Exp $
-
-EAPI=5
-
-XORG_DOC=doc
-inherit xorg-2 multilib versionator flag-o-matic
-EGIT_REPO_URI="git://anongit.freedesktop.org/git/xorg/xserver"
-
-DESCRIPTION="X.Org X servers"
-SLOT="0/${PV}"
-KEYWORDS="amd64 ~arm ~mips ~ppc ~x86"
-
-IUSE_SERVERS="dmx kdrive xnest xorg xvfb"
-IUSE="${IUSE_SERVERS} ipv6 minimal nptl selinux +suid tslib +udev unwind"
-
-RDEPEND=">=app-eselect/eselect-opengl-1.0.8
-	dev-libs/openssl
-	media-libs/freetype
-	>=x11-apps/iceauth-1.0.2
-	>=x11-apps/rgb-1.0.3
-	>=x11-apps/xauth-1.0.3
-	x11-apps/xkbcomp
-	>=x11-libs/libdrm-2.4.20
-	>=x11-libs/libpciaccess-0.12.901
-	>=x11-libs/libXau-1.0.4
-	>=x11-libs/libXdmcp-1.0.2
-	>=x11-libs/libXfont-1.4.2
-	>=x11-libs/libxkbfile-1.0.4
-	>=x11-libs/libxshmfence-1.1
-	>=x11-libs/pixman-0.27.2
-	>=x11-libs/xtrans-1.3.2
-	>=x11-misc/xbitmaps-1.0.1
-	>=x11-misc/xkeyboard-config-2.4.1-r3
-	dmx? (
-		x11-libs/libXt
-		>=x11-libs/libdmx-1.0.99.1
-		>=x11-libs/libX11-1.1.5
-		>=x11-libs/libXaw-1.0.4
-		>=x11-libs/libXext-1.0.99.4
-		>=x11-libs/libXfixes-5.0
-		>=x11-libs/libXi-1.2.99.1
-		>=x11-libs/libXmu-1.0.3
-		x11-libs/libXrender
-		>=x11-libs/libXres-1.0.3
-		>=x11-libs/libXtst-1.0.99.2
-	)
-	kdrive? (
-		>=x11-libs/libXext-1.0.5
-		x11-libs/libXv
-	)
-	!minimal? (
-		>=x11-libs/libX11-1.1.5
-		>=x11-libs/libXext-1.0.5
-		>=media-libs/mesa-9.2.0[nptl=]
-	)
-	tslib? ( >=x11-libs/tslib-1.0 )
-	udev? ( >=virtual/udev-150 )
-	unwind? ( sys-libs/libunwind )
-	>=x11-apps/xinit-1.3
-	selinux? ( sec-policy/selinux-xserver )"
-
-DEPEND="${RDEPEND}
-	sys-devel/flex
-	>=x11-proto/bigreqsproto-1.1.0
-	>=x11-proto/compositeproto-0.4
-	>=x11-proto/damageproto-1.1
-	>=x11-proto/fixesproto-5.0
-	>=x11-proto/fontsproto-2.0.2
-	>=x11-proto/glproto-1.4.17
-	>=x11-proto/inputproto-2.2.99.1
-	>=x11-proto/kbproto-1.0.3
-	>=x11-proto/randrproto-1.4.0
-	>=x11-proto/recordproto-1.13.99.1
-	>=x11-proto/renderproto-0.11
-	>=x11-proto/resourceproto-1.2.0
-	>=x11-proto/scrnsaverproto-1.1
-	>=x11-proto/trapproto-3.4.3
-	>=x11-proto/videoproto-2.2.2
-	>=x11-proto/xcmiscproto-1.2.0
-	>=x11-proto/xextproto-7.2.99.901
-	>=x11-proto/xf86dgaproto-2.0.99.1
-	>=x11-proto/xf86rushproto-1.1.2
-	>=x11-proto/xf86vidmodeproto-2.2.99.1
-	>=x11-proto/xineramaproto-1.1.3
-	>=x11-proto/xproto-7.0.22
-	>=x11-proto/presentproto-1.0
-	>=x11-proto/dri3proto-1.0
-	dmx? (
-		>=x11-proto/dmxproto-2.2.99.1
-		doc? (
-			|| (
-				www-client/links
-				www-client/lynx
-				www-client/w3m
-			)
-		)
-	)
-	!minimal? (
-		>=x11-proto/xf86driproto-2.1.0
-		>=x11-proto/dri2proto-2.8
-	)"
-
-PDEPEND="
-	xorg? ( >=x11-base/xorg-drivers-$(get_version_component_range 1-2) )"
-
-REQUIRED_USE="!minimal? (
-		|| ( ${IUSE_SERVERS} )
-	)"
-
-#UPSTREAMED_PATCHES=(
-#	"${WORKDIR}/patches/"
-#)
-
-PATCHES=(
-	"${UPSTREAMED_PATCHES[@]}"
-	"${FILESDIR}"/${PN}-1.12-ia64-fix_inx_outx.patch
-	"${FILESDIR}"/${PN}-1.12-unloadsubmodule.patch
-	"${FILESDIR}"/${PN}-1.14.3-musl.patch
-)
-
-pkg_pretend() {
-	# older gcc is not supported
-	[[ "${MERGE_TYPE}" != "binary" && $(gcc-major-version) -lt 4 ]] && \
-		die "Sorry, but gcc earlier than 4.0 will not work for xorg-server."
-}
-
-src_configure() {
-	# localstatedir is used for the log location; we need to override the default
-	#	from ebuild.sh
-	# sysconfdir is used for the xorg.conf location; same applies
-	# NOTE: fop is used for doc generating ; and i have no idea if gentoo
-	#	package it somewhere
-	XORG_CONFIGURE_OPTIONS=(
-		$(use_enable ipv6)
-		$(use_enable dmx)
-		$(use_enable kdrive)
-		$(use_enable kdrive kdrive-kbd)
-		$(use_enable kdrive kdrive-mouse)
-		$(use_enable kdrive kdrive-evdev)
-		$(use_enable suid install-setuid)
-		$(use_enable tslib)
-		$(use_enable unwind libunwind)
-		$(use_enable !minimal record)
-		$(use_enable !minimal xfree86-utils)
-		$(use_enable !minimal install-libxf86config)
-		$(use_enable !minimal dri)
-		$(use_enable !minimal dri2)
-		$(use_enable !minimal glx)
-		$(use_enable xnest)
-		$(use_enable xorg)
-		$(use_enable xvfb)
-		$(use_enable nptl glx-tls)
-		$(use_enable udev config-udev)
-		$(use_with doc doxygen)
-		$(use_with doc xmlto)
-		--enable-libdrm
-		--sysconfdir="${EPREFIX}"/etc/X11
-		--localstatedir="${EPREFIX}"/var
-		--with-fontrootdir="${EPREFIX}"/usr/share/fonts
-		--with-xkb-output="${EPREFIX}"/var/lib/xkb
-		--disable-config-hal
-		--disable-linux-acpi
-		--without-dtrace
-		--without-fop
-		--with-os-vendor=Gentoo
-		--with-sha1=libcrypto
-	)
-
-	# Xorg-server requires includes from OS mesa which are not visible for
-	# users of binary drivers.
-	mkdir -p "${T}/mesa-symlinks/GL"
-	for i in gl glx glxmd glxproto glxtokens; do
-		ln -s "${EROOT}usr/$(get_libdir)/opengl/xorg-x11/include/$i.h" "${T}/mesa-symlinks/GL/$i.h" || die
-	done
-	for i in glext glxext; do
-		ln -s "${EROOT}usr/$(get_libdir)/opengl/global/include/$i.h" "${T}/mesa-symlinks/GL/$i.h" || die
-	done
-	append-cppflags "-I${T}/mesa-symlinks"
-
-	xorg-2_src_configure
-}
-
-src_install() {
-	xorg-2_src_install
-
-	dynamic_libgl_install
-
-	server_based_install
-
-	if ! use minimal &&	use xorg; then
-		# Install xorg.conf.example into docs
-		dodoc "${AUTOTOOLS_BUILD_DIR}"/hw/xfree86/xorg.conf.example
-	fi
-
-	newinitd "${FILESDIR}"/xdm-setup.initd-1 xdm-setup
-	newinitd "${FILESDIR}"/xdm.initd-10 xdm
-	newconfd "${FILESDIR}"/xdm.confd-4 xdm
-
-	# install the @x11-module-rebuild set for Portage
-	insinto /usr/share/portage/config/sets
-	newins "${FILESDIR}"/xorg-sets.conf xorg.conf
-}
-
-pkg_postinst() {
-	# sets up libGL and DRI2 symlinks if needed (ie, on a fresh install)
-	eselect opengl set xorg-x11 --use-old
-
-	if [[ ${PV} != 9999 && $(get_version_component_range 2 ${REPLACING_VERSIONS}) != $(get_version_component_range 2 ${PV}) ]]; then
-		ewarn "You must rebuild all drivers if upgrading from <xorg-server-$(get_version_component_range 1-2)"
-		ewarn "because the ABI changed. If you cannot start X because"
-		ewarn "of module version mismatch errors, this is your problem."
-
-		echo
-		ewarn "You can rebuild all installed packages in the x11-drivers"
-		ewarn "category using this command:"
-		ewarn "	emerge @x11-module-rebuild"
-	fi
-
-	if use udev && has_version virtual/udev[-keymap]; then
-		ewarn "virtual/udev was built without keymap support. This may cause input device"
-		ewarn "autoconfiguration to fail."
-	fi
-}
-
-pkg_postrm() {
-	# Get rid of module dir to ensure opengl-update works properly
-	if [[ -z ${REPLACED_BY_VERSION} && -e ${EROOT}/usr/$(get_libdir)/xorg/modules ]]; then
-		rm -rf "${EROOT}"/usr/$(get_libdir)/xorg/modules
-	fi
-}
-
-dynamic_libgl_install() {
-	# next section is to setup the dynamic libGL stuff
-	ebegin "Moving GL files for dynamic switching"
-		dodir /usr/$(get_libdir)/opengl/xorg-x11/extensions
-		local x=""
-		for x in "${ED}"/usr/$(get_libdir)/xorg/modules/extensions/lib{glx,dri,dri2}*; do
-			if [ -f ${x} -o -L ${x} ]; then
-				mv -f ${x} "${ED}"/usr/$(get_libdir)/opengl/xorg-x11/extensions
-			fi
-		done
-	eend 0
-}
-
-server_based_install() {
-	if ! use xorg; then
-		rm "${ED}"/usr/share/man/man1/Xserver.1x \
-			"${ED}"/usr/$(get_libdir)/xserver/SecurityPolicy \
-			"${ED}"/usr/$(get_libdir)/pkgconfig/xorg-server.pc \
-			"${ED}"/usr/share/man/man1/Xserver.1x
-	fi
-}
diff --git a/x11-base/xorg-server/xorg-server-1.15.2-r99.ebuild b/x11-base/xorg-server/xorg-server-1.15.2-r99.ebuild
deleted file mode 100644
index f5e05c2c..00000000
--- a/x11-base/xorg-server/xorg-server-1.15.2-r99.ebuild
+++ /dev/null
@@ -1,257 +0,0 @@
-# Copyright 1999-2015 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Header: /var/cvsroot/gentoo-x86/x11-base/xorg-server/xorg-server-1.15.2-r1.ebuild,v 1.8 2015/01/16 08:08:28 ago Exp $
-
-EAPI=5
-
-XORG_EAUTORECONF=yes
-XORG_DOC=doc
-inherit xorg-2 multilib versionator flag-o-matic
-EGIT_REPO_URI="git://anongit.freedesktop.org/git/xorg/xserver"
-
-DESCRIPTION="X.Org X servers"
-SLOT="0/${PV}"
-KEYWORDS="amd64 ~arm ~mips ppc x86"
-
-SRC_URI="${SRC_URI} mirror://gentoo/${PN}-1.16-cve-2014-8091..8103.patches.tar.xz"
-
-IUSE_SERVERS="dmx kdrive xnest xorg xvfb"
-IUSE="${IUSE_SERVERS} ipv6 minimal nptl selinux +suid tslib +udev unwind"
-
-CDEPEND=">=app-eselect/eselect-opengl-1.0.8
-	dev-libs/openssl
-	media-libs/freetype
-	>=x11-apps/iceauth-1.0.2
-	>=x11-apps/rgb-1.0.3
-	>=x11-apps/xauth-1.0.3
-	x11-apps/xkbcomp
-	>=x11-libs/libdrm-2.4.20
-	>=x11-libs/libpciaccess-0.12.901
-	>=x11-libs/libXau-1.0.4
-	>=x11-libs/libXdmcp-1.0.2
-	>=x11-libs/libXfont-1.4.2
-	>=x11-libs/libxkbfile-1.0.4
-	>=x11-libs/libxshmfence-1.1
-	>=x11-libs/pixman-0.27.2
-	>=x11-libs/xtrans-1.3.2
-	>=x11-misc/xbitmaps-1.0.1
-	>=x11-misc/xkeyboard-config-2.4.1-r3
-	dmx? (
-		x11-libs/libXt
-		>=x11-libs/libdmx-1.0.99.1
-		>=x11-libs/libX11-1.1.5
-		>=x11-libs/libXaw-1.0.4
-		>=x11-libs/libXext-1.0.99.4
-		>=x11-libs/libXfixes-5.0
-		>=x11-libs/libXi-1.2.99.1
-		>=x11-libs/libXmu-1.0.3
-		x11-libs/libXrender
-		>=x11-libs/libXres-1.0.3
-		>=x11-libs/libXtst-1.0.99.2
-	)
-	kdrive? (
-		>=x11-libs/libXext-1.0.5
-		x11-libs/libXv
-	)
-	!minimal? (
-		>=x11-libs/libX11-1.1.5
-		>=x11-libs/libXext-1.0.5
-		>=media-libs/mesa-9.2.0[nptl=]
-	)
-	tslib? ( >=x11-libs/tslib-1.0 )
-	udev? ( >=virtual/udev-150 )
-	unwind? ( sys-libs/libunwind )
-	>=x11-apps/xinit-1.3"
-
-DEPEND="${CDEPEND}
-	sys-devel/flex
-	>=x11-proto/bigreqsproto-1.1.0
-	>=x11-proto/compositeproto-0.4
-	>=x11-proto/damageproto-1.1
-	>=x11-proto/fixesproto-5.0
-	>=x11-proto/fontsproto-2.0.2
-	>=x11-proto/glproto-1.4.17
-	>=x11-proto/inputproto-2.2.99.1
-	>=x11-proto/kbproto-1.0.3
-	>=x11-proto/randrproto-1.4.0
-	>=x11-proto/recordproto-1.13.99.1
-	>=x11-proto/renderproto-0.11
-	>=x11-proto/resourceproto-1.2.0
-	>=x11-proto/scrnsaverproto-1.1
-	>=x11-proto/trapproto-3.4.3
-	>=x11-proto/videoproto-2.2.2
-	>=x11-proto/xcmiscproto-1.2.0
-	>=x11-proto/xextproto-7.2.99.901
-	>=x11-proto/xf86dgaproto-2.0.99.1
-	>=x11-proto/xf86rushproto-1.1.2
-	>=x11-proto/xf86vidmodeproto-2.2.99.1
-	>=x11-proto/xineramaproto-1.1.3
-	>=x11-proto/xproto-7.0.22
-	>=x11-proto/presentproto-1.0
-	>=x11-proto/dri3proto-1.0
-	dmx? (
-		>=x11-proto/dmxproto-2.2.99.1
-		doc? (
-			|| (
-				www-client/links
-				www-client/lynx
-				www-client/w3m
-			)
-		)
-	)
-	!minimal? (
-		>=x11-proto/xf86driproto-2.1.0
-		>=x11-proto/dri2proto-2.8
-	)"
-
-RDEPEND="${CDEPEND}
-	selinux? ( sec-policy/selinux-xserver )
-"
-
-PDEPEND="
-	xorg? ( >=x11-base/xorg-drivers-$(get_version_component_range 1-2) )"
-
-REQUIRED_USE="!minimal? (
-		|| ( ${IUSE_SERVERS} )
-	)"
-
-pkg_pretend() {
-	# older gcc is not supported
-	[[ "${MERGE_TYPE}" != "binary" && $(gcc-major-version) -lt 4 ]] && \
-		die "Sorry, but gcc earlier than 4.0 will not work for xorg-server."
-}
-
-src_prepare() {
-	UPSTREAMED_PATCHES=(
-		"${WORKDIR}"/patches/*.patch
-	)
-	PATCHES=(
-		"${UPSTREAMED_PATCHES[@]}"
-		"${FILESDIR}"/${PN}-1.12-ia64-fix_inx_outx.patch
-		"${FILESDIR}"/${PN}-1.12-unloadsubmodule.patch
-		"${FILESDIR}"/${PN}-1.14.3-musl.patch
-	)
-	xorg-2_src_prepare
-}
-
-src_configure() {
-	# localstatedir is used for the log location; we need to override the default
-	#	from ebuild.sh
-	# sysconfdir is used for the xorg.conf location; same applies
-	# NOTE: fop is used for doc generating ; and i have no idea if gentoo
-	#	package it somewhere
-	XORG_CONFIGURE_OPTIONS=(
-		$(use_enable ipv6)
-		$(use_enable dmx)
-		$(use_enable kdrive)
-		$(use_enable kdrive kdrive-kbd)
-		$(use_enable kdrive kdrive-mouse)
-		$(use_enable kdrive kdrive-evdev)
-		$(use_enable suid install-setuid)
-		$(use_enable tslib)
-		$(use_enable unwind libunwind)
-		$(use_enable !minimal record)
-		$(use_enable !minimal xfree86-utils)
-		$(use_enable !minimal install-libxf86config)
-		$(use_enable !minimal dri)
-		$(use_enable !minimal dri2)
-		$(use_enable !minimal glx)
-		$(use_enable xnest)
-		$(use_enable xorg)
-		$(use_enable xvfb)
-		$(use_enable nptl glx-tls)
-		$(use_enable udev config-udev)
-		$(use_with doc doxygen)
-		$(use_with doc xmlto)
-		--enable-libdrm
-		--sysconfdir="${EPREFIX}"/etc/X11
-		--localstatedir="${EPREFIX}"/var
-		--with-fontrootdir="${EPREFIX}"/usr/share/fonts
-		--with-xkb-output="${EPREFIX}"/var/lib/xkb
-		--disable-config-hal
-		--disable-linux-acpi
-		--without-dtrace
-		--without-fop
-		--with-os-vendor=Gentoo
-		--with-sha1=libcrypto
-	)
-
-	# Xorg-server requires includes from OS mesa which are not visible for
-	# users of binary drivers.
-	mkdir -p "${T}/mesa-symlinks/GL"
-	for i in gl glx glxmd glxproto glxtokens; do
-		ln -s "${EROOT}usr/$(get_libdir)/opengl/xorg-x11/include/$i.h" "${T}/mesa-symlinks/GL/$i.h" || die
-	done
-	for i in glext glxext; do
-		ln -s "${EROOT}usr/$(get_libdir)/opengl/global/include/$i.h" "${T}/mesa-symlinks/GL/$i.h" || die
-	done
-	append-cppflags "-I${T}/mesa-symlinks"
-
-	xorg-2_src_configure
-}
-
-src_install() {
-	xorg-2_src_install
-
-	dynamic_libgl_install
-
-	server_based_install
-
-	if ! use minimal &&	use xorg; then
-		# Install xorg.conf.example into docs
-		dodoc "${AUTOTOOLS_BUILD_DIR}"/hw/xfree86/xorg.conf.example
-	fi
-
-	newinitd "${FILESDIR}"/xdm-setup.initd-1 xdm-setup
-	newinitd "${FILESDIR}"/xdm.initd-11 xdm
-	newconfd "${FILESDIR}"/xdm.confd-4 xdm
-
-	# install the @x11-module-rebuild set for Portage
-	insinto /usr/share/portage/config/sets
-	newins "${FILESDIR}"/xorg-sets.conf xorg.conf
-}
-
-pkg_postinst() {
-	# sets up libGL and DRI2 symlinks if needed (ie, on a fresh install)
-	eselect opengl set xorg-x11 --use-old
-
-	if [[ ${PV} != 9999 && $(get_version_component_range 2 ${REPLACING_VERSIONS}) != $(get_version_component_range 2 ${PV}) ]]; then
-		ewarn "You must rebuild all drivers if upgrading from <xorg-server-$(get_version_component_range 1-2)"
-		ewarn "because the ABI changed. If you cannot start X because"
-		ewarn "of module version mismatch errors, this is your problem."
-
-		echo
-		ewarn "You can rebuild all installed packages in the x11-drivers"
-		ewarn "category using this command:"
-		ewarn "	emerge @x11-module-rebuild"
-	fi
-}
-
-pkg_postrm() {
-	# Get rid of module dir to ensure opengl-update works properly
-	if [[ -z ${REPLACED_BY_VERSION} && -e ${EROOT}/usr/$(get_libdir)/xorg/modules ]]; then
-		rm -rf "${EROOT}"/usr/$(get_libdir)/xorg/modules
-	fi
-}
-
-dynamic_libgl_install() {
-	# next section is to setup the dynamic libGL stuff
-	ebegin "Moving GL files for dynamic switching"
-		dodir /usr/$(get_libdir)/opengl/xorg-x11/extensions
-		local x=""
-		for x in "${ED}"/usr/$(get_libdir)/xorg/modules/extensions/lib{glx,dri,dri2}*; do
-			if [ -f ${x} -o -L ${x} ]; then
-				mv -f ${x} "${ED}"/usr/$(get_libdir)/opengl/xorg-x11/extensions
-			fi
-		done
-	eend 0
-}
-
-server_based_install() {
-	if ! use xorg; then
-		rm "${ED}"/usr/share/man/man1/Xserver.1x \
-			"${ED}"/usr/$(get_libdir)/xserver/SecurityPolicy \
-			"${ED}"/usr/$(get_libdir)/pkgconfig/xorg-server.pc \
-			"${ED}"/usr/share/man/man1/Xserver.1x
-	fi
-}