Fix whitespace in list items.

8 files changed, 47 insertions, 43 deletions

diff --git a/dependencies.tex b/dependencies.tex
index 39b43f5..deb5d9c 100644
--- a/dependencies.tex
+++ b/dependencies.tex
@@ -60,7 +60,7 @@ as supporting \t{BDEPEND}, the build dependencies are split into two subclasses:
 \item \t{BDEPEND} build dependencies that are binary compatible with the native build system
     (\t{CBUILD}). The ebuild is allowed to call binary executables installed by this kind of
     dependency.
-    \item \t{DEPEND} build dependencies that are binary compatible with the system being built
+\item \t{DEPEND} build dependencies that are binary compatible with the system being built
     (\t{CHOST}). The ebuild must not execute binary executables installed by this kind of
     dependency.
 \end{compactitem}
@@ -335,14 +335,14 @@ the following operators:
 
 \begin{description}
 \item[*] Indicates that any slot value is acceptable. In addition, for runtime dependencies,
-indicates that the package will not break if the matched package is uninstalled and replaced by
-a different matching package in a different slot.
+    indicates that the package will not break if the matched package is uninstalled and replaced by
+    a different matching package in a different slot.
 \item[=] Indicates that any slot value is acceptable. In addition, for runtime dependencies,
-indicates that the package will break unless a matching package with slot and sub-slot equal to the
-slot and sub-slot of the best version installed as a build-time (\t{DEPEND}) dependency is
-available.
+    indicates that the package will break unless a matching package with slot and sub-slot equal to
+    the slot and sub-slot of the best version installed as a build-time (\t{DEPEND}) dependency is
+    available.
 \item[slot=] Indicates that only a specific slot value is acceptable, and otherwise behaves
-identically to the plain equals slot operator.
+    identically to the plain equals slot operator.
 \end{description}
 
 To implement the equals slot operator, the package manager will need to store the slot/sub-slot
diff --git a/ebuild-vars.tex b/ebuild-vars.tex
index faecf8f..497bd77 100644
--- a/ebuild-vars.tex
+++ b/ebuild-vars.tex
@@ -211,12 +211,13 @@ The following are special variables defined by the package manager for internal
 not be exported to the ebuild environment:
 
 \begin{description}
-\item[DEFINED_PHASES] \featurelabel{defined-phases} A space separated arbitrarily ordered list of
-phase names (e.\,g.\ \t{configure setup unpack}) whose phase functions are defined by the ebuild or
-an eclass inherited by the ebuild. If no phase functions are defined, a single hyphen is used
-instead of an empty string. For EAPIs listed in table~\ref{tab:defined-phases-table} as having
-optional \t{DEFINED_PHASES} support, package managers may not rely upon the metadata cache having
-this variable defined, and must treat an empty string as ``this information is not available''.
+\item[DEFINED_PHASES] \featurelabel{defined-phases} A space separated arbitrarily ordered list
+    of phase names (e.\,g.\ \t{configure setup unpack}) whose phase functions are defined by the
+    ebuild or an eclass inherited by the ebuild. If no phase functions are defined, a single hyphen
+    is used instead of an empty string. For EAPIs listed in table~\ref{tab:defined-phases-table}
+    as having optional \t{DEFINED_PHASES} support, package managers may not rely upon the metadata
+    cache having this variable defined, and must treat an empty string as ``this information is not
+    available''.
 \end{description}
 
 \note{Thus, by extension of section~\ref{sec:metadata-invariance}, phase functions must not be
diff --git a/eclasses.tex b/eclasses.tex
index 7a8bfbd..8305504 100644
--- a/eclasses.tex
+++ b/eclasses.tex
@@ -29,7 +29,7 @@ The \t{inherit} command must also ensure that:
 \begin{compactitem}
 \item The \t{ECLASS} variable is set to the name of the current eclass, when sourcing that eclass.
 \item Once all inheriting has been done, the \t{INHERITED} metadata variable contains the name of
-    every eclass used, separated  by whitespace.
+    every eclass used, separated by whitespace.
 \end{compactitem}
 
 \section{Eclass-defined Metadata Keys}
diff --git a/introduction.tex b/introduction.tex
index afbe708..b5b63c6 100644
--- a/introduction.tex
+++ b/introduction.tex
@@ -38,7 +38,7 @@ Patches will be reviewed by the PMS team, who will do one of the following:
 \begin{compactitem}
 \item Accept and apply the patch.
 \item Explain why the patch cannot be applied as-is. The patch may then be updated and resubmitted
-if appropriate.
+    if appropriate.
 \item Reject the patch outright.
 \item Take special action merited by the individual circumstances.
 \end{compactitem}
diff --git a/merge.tex b/merge.tex
index d23d5f0..6649d35 100644
--- a/merge.tex
+++ b/merge.tex
@@ -112,9 +112,9 @@ In order to ensure interoperability with configuration update tools, the followi
 used by all package managers when merging any regular file:
 
 \begin{compactenum}
-\item If the directory containing the file to be merged is not listed in \t{CONFIG_PROTECT}, and
-     is not a subdirectory of any such directory, and if the file is not listed in \t{CONFIG_PROTECT},
-     the file is merged normally.
+\item If the directory containing the file to be merged is not listed in \t{CONFIG_PROTECT}, and is
+    not a subdirectory of any such directory, and if the file is not listed in \t{CONFIG_PROTECT},
+    the file is merged normally.
 \item If the directory containing the file to be merged is listed in \t{CONFIG_PROTECT_MASK}, or
     is a subdirectory of such a directory, or if the file is listed in \t{CONFIG_PROTECT_MASK},
     the file is merged normally.
diff --git a/pkg-mgr-commands.tex b/pkg-mgr-commands.tex
index 74c8983..1e414d4 100644
--- a/pkg-mgr-commands.tex
+++ b/pkg-mgr-commands.tex
@@ -443,12 +443,13 @@ the current phase function has returned.
     dependent as per section~\ref{sec:failure-behaviour}.
 
 \item[dodoc] \featurelabel{dodoc} Installs the given files into a subdirectory under
-    \t{/usr/share/doc/\$\{PF\}/} with file mode \t{0644}. The subdirectory is set by the most recent
-    call to \t{docinto}. If \t{docinto} has not yet been called, instead installs to the directory
-    \t{/usr/share/doc/\$\{PF\}/}. For EAPIs listed in table~\ref{tab:dodoc-table} as supporting \t{-r},
-    if the first argument is \t{-r}, any subsequent arguments that are directories are installed
-    recursively to the appropriate location; in any other case, it is an error for a directory to be
-    specified. Failure behaviour is EAPI dependent as per section~\ref{sec:failure-behaviour}.
+    \t{/usr/share/doc/\$\{PF\}/} with file mode \t{0644}. The subdirectory is set by the most
+    recent call to \t{docinto}. If \t{docinto} has not yet been called, instead installs to the
+    directory \t{/usr/share/doc/\$\{PF\}/}. For EAPIs listed in table~\ref{tab:dodoc-table}
+    as supporting \t{-r}, if the first argument is \t{-r}, any subsequent arguments that are
+    directories are installed recursively to the appropriate location; in any other case, it is
+    an error for a directory to be specified. Failure behaviour is EAPI dependent as per
+    section~\ref{sec:failure-behaviour}.
 
 \item[doenvd] Installs the given environment files into \t{/etc/env.d/}, by default with file mode
     \t{0644}, or with the \t{install} options set by the most recent \t{insopts} call.
@@ -1003,12 +1004,12 @@ has returned.
 
 \begin{description}
 \item[dosed] Takes any number of arguments, which can be files or \t{sed} expressions. For each
-    argument, if it names, relative to \t{ED} (offset-prefix aware EAPIs) or \t{D} (offset-prefix agnostic
-    EAPIs) a file which exists, then \t{sed} is run with the current expression on that file. Otherwise,
-    the current expression is set to the text of the argument. The initial value of the expression is
-    \t{s:\$\{ED\}::g} in offset-prefix aware EAPIs and \t{s:\$\{D\}::g} in offset-prefix agnostic
-    EAPIs. In EAPIs listed in table~\ref{tab:banned-commands-table}, this command is banned as per
-    section~\ref{sec:banned-commands}.
+    argument, if it names, relative to \t{ED} (offset-prefix aware EAPIs) or \t{D} (offset-prefix
+    agnostic EAPIs) a file which exists, then \t{sed} is run with the current expression on that
+    file. Otherwise, the current expression is set to the text of the argument. The initial value
+    of the expression is \t{s:\$\{ED\}::g} in offset-prefix aware EAPIs and \t{s:\$\{D\}::g} in
+    offset-prefix agnostic EAPIs. In EAPIs listed in table~\ref{tab:banned-commands-table}, this
+    command is banned as per section~\ref{sec:banned-commands}.
 
 \item[unpack] Unpacks one or more source archives, in order, into the current directory.
     For compressed files, creates the target file in the current directory, with the compression
@@ -1036,19 +1037,20 @@ has returned.
     \item tar files (\t{*.tar}). Ebuilds must ensure that GNU tar is installed.
     \item gzip-compressed files (\t{*.gz, *.Z}). Ebuilds must ensure that GNU gzip is installed.
     \item gzip-compressed tar files (\t{*.tar.gz, *.tgz, *.tar.Z}). Ebuilds must ensure that
-    GNU gzip and GNU tar are installed.
+        GNU gzip and GNU tar are installed.
     \item bzip2-compressed files (\t{*.bz2, *.bz}). Ebuilds must ensure that bzip2 is installed.
     \item bzip2-compressed tar files (\t{*.tar.bz2, *.tbz2, *.tar.bz, *.tbz}). Ebuilds must ensure
-    that bzip2 and GNU tar are installed.
+        that bzip2 and GNU tar are installed.
     \item zip files (\t{*.zip, *.ZIP, *.jar}). Ebuilds must ensure that Info-ZIP Unzip is installed.
     \item 7zip files (\t{*.7z, *.7Z}). Ebuilds must ensure that P7ZIP is installed.
     \item rar files (\t{*.rar, *.RAR}). Ebuilds must ensure that RARLAB's unrar is installed.
     \item LHA archives (\t{*.LHA, *.LHa, *.lha, *.lzh}). Ebuilds must ensure that the lha program is
-    installed.
+        installed.
     \item ar archives (\t{*.a}). Ebuilds must ensure that GNU binutils is installed.
     \item deb packages (\t{*.deb}). Ebuilds must ensure that the deb2targz program is installed on
-    those platforms where the GNU binutils ar program is not available and the installed ar program is
-    incompatible with GNU archives. Otherwise, ebuilds must ensure that GNU binutils is installed.
+        those platforms where the GNU binutils ar program is not available and the installed ar
+        program is incompatible with GNU archives. Otherwise, ebuilds must ensure that GNU binutils
+        is installed.
     \item lzma-compressed files (\t{*.lzma}). Ebuilds must ensure that XZ Utils is installed.
     \item lzma-compressed tar files (\t{*.tar.lzma}). Ebuilds must ensure that XZ Utils and GNU tar
         are installed.
diff --git a/profiles.tex b/profiles.tex
index 58c6d3b..b423697 100644
--- a/profiles.tex
+++ b/profiles.tex
@@ -55,11 +55,12 @@ and may contain \t{a-zA-Z0-9_} only. Additional syntax, which is a small subset
 bash syntax, is allowed as follows:
 
 \begin{compactitem}
-\item Variables to the right of the equals sign in the form \t{\$\{foo\}} or \t{\$foo} are recognised and
-  expanded from variables previously set in this or earlier \t{make.defaults} files.
-\item One logical line may be continued over multiple physical lines by escaping the newline with a
-  backslash. A quoted string may be continued over multiple physical lines by either a simple
-  newline or a backslash-escaped newline.
+\item Variables to the right of the equals sign in the form \t{\$\{foo\}} or \t{\$foo} are
+    recognised and expanded from variables previously set in this or earlier \t{make.defaults}
+    files.
+\item One logical line may be continued over multiple physical lines by escaping the newline with
+    a backslash. A quoted string may be continued over multiple physical lines by either a simple
+    newline or a backslash-escaped newline.
 \item Backslashes, except for line continuations, are not allowed.
 \end{compactitem}
 
diff --git a/tree-layout.tex b/tree-layout.tex
index 9e60af4..9397e4b 100644
--- a/tree-layout.tex
+++ b/tree-layout.tex
@@ -30,9 +30,9 @@ be contained in one directory, whose name shall be that of the
 category. Each category directory shall contain:
 \begin{compactitem}
 \item A \t{metadata.xml} file, as described in appendix~\ref{sec:metadata-xml}\@. Optional.
-\item Zero or more package directories, one for each package in the
-  category, as described in section~\ref{sec:package-dirs}. The name of
-  the package directory shall be the corresponding package name.
+\item Zero or more package directories, one for each package in the category, as described in
+    section~\ref{sec:package-dirs}. The name of the package directory shall be the corresponding
+    package name.
 \end{compactitem}
 
 Category directories may contain additional files, whose purpose is not covered by this