sys-apps/lm_sensors: remove unused patch

Closes: https://github.com/gentoo/gentoo/pull/3808

1 files changed, 0 insertions, 129 deletions

diff --git a/sys-apps/lm_sensors/files/lm_sensors-3.3.1-sensors-detect-gentoo.patch b/sys-apps/lm_sensors/files/lm_sensors-3.3.1-sensors-detect-gentoo.patch
deleted file mode 100644
index 58772f215614..000000000000
--- a/sys-apps/lm_sensors/files/lm_sensors-3.3.1-sensors-detect-gentoo.patch
+++ /dev/null
@@ -1,129 +0,0 @@
---- lm_sensors-3.3.1/prog/detect/sensors-detect
-+++ lm_sensors-3.3.1/prog/detect/sensors-detect
-@@ -20,6 +20,9 @@
- #    MA 02110-1301 USA.
- #
- 
-+# Gentoo specific modifications based on a patch from Rudo Thomas
-+# <thomr9am@ss1000.ms.mff.cuni.cz>
-+
- require 5.004;
- 
- use strict;
-@@ -6471,26 +6474,33 @@
- 			print MODPROBE_D $configfile;
- 			close(MODPROBE_D);
- 		} else {
-+			print "\nIf you want to load the modules at startup, generate a config file\n",
-+			      "below and make sure lm_sensors gets started at boot time; e.g\n",
-+			      "\$ rc-update add lm_sensors default\n";
- 			print "To make the sensors modules behave correctly, add these lines to\n".
--			      "/etc/modprobe.conf:\n\n";
-+			      "/etc/modules.d/lm_sensors and run modules-update:\n\n";
- 			print "#----cut here----\n".
- 			      $configfile.
- 			      "#----cut here----\n\n";
- 		}
- 	}
- 
--	my $have_sysconfig = -d '/etc/sysconfig';
--	printf "Do you want to \%s /etc/sysconfig/lm_sensors? (\%s): ",
--	       (-e '/etc/sysconfig/lm_sensors' ? 'overwrite' : 'generate'),
--	       ($have_sysconfig ? 'YES/no' : 'yes/NO');
--	$_ = <STDIN>;
--	if (($have_sysconfig and not m/^\s*n/i) or m/^\s*y/i) {
--		unless ($have_sysconfig) {
--			mkdir('/etc/sysconfig', 0777)
--				or die "Sorry, can't create /etc/sysconfig ($!)";
-+	my $have_config = -f '/etc/conf.d/lm_sensors';
-+	print "\nDo you want to ".($have_config?"overwrite":"generate").
-+	      " /etc/conf.d/lm_sensors? Enter s to specify other file name?\n",
-+	      "  (".($have_config?"yes/NO":"YES/no")."/s): ";
-+	my $reply = <STDIN>;
-+
-+	if (($have_config and $reply =~ /^\s*[Yy]/) or
-+		(not $have_config and not $reply =~ /^\s*[Nn]/) or
-+		$reply =~ /^\s*[Ss]/) {
-+		my $filename = "/etc/conf.d/lm_sensors";
-+		if ($reply =~ /^\s*[Ss]/) {
-+			print "Specify the file to store the configuration to: ";
-+			$filename = <STDIN>;
- 		}
--		open(local *SYSCONFIG, ">/etc/sysconfig/lm_sensors")
--			or die "Sorry, can't create /etc/sysconfig/lm_sensors ($!)";
-+		open(local *SYSCONFIG, ">".$filename)
-+			or die "Sorry, can't create $filename ($!).";
- 		print SYSCONFIG "# Generated by sensors-detect on " . scalar localtime() . "\n";
- 		print SYSCONFIG <<'EOT';
- # This file is sourced by /etc/init.d/lm_sensors and defines the modules to
-@@ -6501,6 +6511,11 @@
- # BUS_MODULES for any required bus driver module (for example for I2C or SPI).
- 
- EOT
-+		print SYSCONFIG
-+			"# Load modules at startup\n".
-+			"LOADMODULES=yes\n\n".
-+			"# Initialize sensors at startup\n".
-+			"INITSENSORS=yes\n\n";
- 		print SYSCONFIG "BUS_MODULES=\"", join(" ", @{$bus_modules}), "\"\n"
- 			if @{$bus_modules};
- 		print SYSCONFIG "HWMON_MODULES=\"", join(" ", @{$hwmon_modules}), "\"\n";
-@@ -6509,6 +6524,10 @@
- 
- # For compatibility reasons, modules are also listed individually as variables
- #    MODULE_0, MODULE_1, MODULE_2, etc.
-+# Please note that the numbers in MODULE_X must start at 0 and increase in
-+# steps of 1. Any number that is missing will make the init script skip the
-+# rest of the modules. Use MODULE_X_ARGS for arguments.
-+#
- # You should use BUS_MODULES and HWMON_MODULES instead if possible.
- 
- EOT
-@@ -6519,25 +6538,7 @@
- 		}
- 		close(SYSCONFIG);
- 
--		if (-x "/bin/systemctl" && -d "/lib/systemd/system" &&
--		    ! -f "/lib/systemd/system/lm_sensors.service") {
--			print "Copy prog/init/lm_sensors.service to /lib/systemd/system\n".
--			      "and run 'systemctl enable lm_sensors.service'\n".
--			      "for initialization at boot time.\n";
--			return;
--		}
--
--		if (-x "/bin/systemctl" &&
--		    -f "/lib/systemd/system/lm_sensors.service") {
--			system("/bin/systemctl", "enable", "lm_sensors.service");
--			system("/bin/systemctl", "start", "lm_sensors.service");
--			# All done, don't check for /etc/init.d/lm_sensors
--			return;
--		}
--
--		print "Copy prog/init/lm_sensors.init to /etc/init.d/lm_sensors\n".
--		      "for initialization at boot time.\n"
--			unless -f "/etc/init.d/lm_sensors";
-+		print "Done.\n";
- 
- 		if (-x "/sbin/insserv" && -f "/etc/init.d/lm_sensors") {
- 			system("/sbin/insserv", "/etc/init.d/lm_sensors");
-@@ -6551,20 +6552,6 @@
- 			      "kernel modules.\n\n";
- 		}
- 	} else {
--		print "To load everything that is needed, add this to one of the system\n".
--		      "initialization scripts (e.g. /etc/rc.d/rc.local):\n\n";
--		print "#----cut here----\n";
--		if (@{$bus_modules}) {
--			print "# Adapter drivers\n";
--			print "modprobe $_\n" foreach (@{$bus_modules});
--		}
--		print "# Chip drivers\n";
--		print "modprobe $_\n" foreach (@{$hwmon_modules});
--		print((-e '/usr/bin/sensors' ?
--		       "/usr/bin/sensors -s\n" :
--		       "/usr/local/bin/sensors -s\n").
--		      "#----cut here----\n\n");
--
- 		print "If you have some drivers built into your kernel, the list above will\n".
- 		      "contain too many modules. Skip the appropriate ones! You really\n".
- 		      "should try these commands right now to make sure everything is\n".