sys-freebsd/freebsd-sbin: remove unused files

Closes: https://github.com/gentoo/gentoo/pull/3903

6 files changed, 0 insertions, 398 deletions

diff --git a/sys-freebsd/freebsd-sbin/files/devd.conf b/sys-freebsd/freebsd-sbin/files/devd.conf
deleted file mode 100644
index fd1e0352e5ba..000000000000
--- a/sys-freebsd/freebsd-sbin/files/devd.conf
+++ /dev/null
@@ -1,153 +0,0 @@
-# Refer to devd.conf(5) and devd(8) man pages for the details on how to
-# run and configure devd.
-#
-
-# NB: All regular expressions have an implicit ^$ around them.
-# NB: device-name is shorthand for 'match device-name'
-
-options {
-	# Each directory directive adds a directory the list of directories
-	# that we scan for files.  Files are read-in in the order that they
-	# are returned from readdir(3).  The rule-sets are combined to
-	# create a DFA that's used to match events to actions.
-	directory "/etc/devd";
-	directory "/usr/local/etc/devd";
-	pid-file "/var/run/devd.pid";
-
-	# Setup some shorthand for regex that we use later in the file.
-	#XXX Yes, these are gross -- imp
-	set scsi-controller-regex
-		"(aac|adv|adw|aha|ahb|ahc|ahd|aic|amd|amr|asr|bt|ciss|ct|dpt|\
-		esp|ida|iir|ips|isp|mlx|mly|mpt|ncr|ncv|nsp|stg|sym|trm|wds)\
-		[0-9]+";
-};
-
-# Note that the attach/detach with the highest value wins, so that one can
-# override these general rules.
-
-#
-# For ethernet like devices start configuring the interface.  Due to
-# a historical accident, this script is called pccard_ether.
-#
-attach 0 {
-	media-type "ethernet";
-	action "/etc/devd_queue add env IN_HOTPLUG=1 /etc/init.d/net.$device-name start";
-};
-
-detach 0 {
-	media-type "ethernet";
-	action "/etc/devd_queue add env IN_HOTPLUG=1 /etc/init.d/net.$device-name stop";
-};
-
-#
-# Try to start dhclient on Ethernet like interfaces when the link comes
-# up.  Only devices that are configured to support DHCP will actually
-# run it.  No link down rule exists because dhclient automaticly exits
-# when the link goes down.
-#
-notify 0 {
-	match "system"		"IFNET";
-	match "type"		"LINK_UP";
-	media-type		"ethernet";
-	action "/etc/devd_queue add /etc/init.d/net.$subsystem start";
-};
-notify 0 {
-	match "system"		"IFNET";
-	match "type"		"LINK_DOWN";
-	media-type		"ethernet";
-	action "/etc/devd_queue add /etc/init.d/net.$subsystem stop";
-};
-
-#
-# Like Ethernet devices, but separate because
-# they have a different media type.  We may want
-# to exploit this later.
-#
-#detach 0 {
-#	media-type "802.11";
-#	action "env IN_HOTPLUG=1 /etc/init.d/net.$device-name stop";
-#};
-#attach 0 {
-#	media-type "802.11";
-#	action "env IN_HOTPLUG=1 /etc/init.d/net.$device-name start";
-#};
-
-# Not sure how to handle this in Gentoo yet
-# When a USB Bluetooth dongle appears activate it
-#attach 100 {
-#	device-name "ubt[0-9]+";
-#	action "/etc/rc.d/bluetooth start $device-name";
-#};
-#detach 100 {
-#	device-name "ubt[0-9]+";
-#	action "/etc/rc.d/bluetooth stop $device-name";
-#};
-
-# When a USB keyboard arrives, attach it as the console keyboard.
-attach 100 {
-	device-name "ukbd0";
-	action "kbdcontrol -k /dev/ukbd0 < /dev/console";
-};
-detach 100 {
-	device-name "ukbd0";
-	action "kbdcontrol -k /dev/kbd0 < /dev/console";
-};
-
-# The entry below starts and stops moused when a mouse is plugged in.
-attach 100 {
-	device-name "psm[0-9]+";
-	action "/etc/devd_queue add env IN_HOTPLUG=1 /etc/init.d/moused.$device-name start";
-};
-detach 100 {
-	device-name "psm[0-9]+";
-	action "/etc/devd_queue add env IN_HOTPLUG=1 /etc/init.d/moused.$device-name stop";
-};
-attach 100 {
-	device-name "ums[0-9]+";
-	action "/etc/devd_queue add env IN_HOTPLUG=1 /etc/init.d/moused.$device-name start";
-};
-detach 100 {
-	device-name "ums[0-9]+";
-	action "/etc/devd_queue add env IN_HOTPLUG=1 /etc/init.d/moused.$device-name stop";
-};
-
-# Notify all users before beginning emergency shutdown when we get
-# a _CRT or _HOT thermal event and we're going to power down the system
-# very soon.
-notify 10 {
-	match "system"		"ACPI";
-	match "subsystem"	"Thermal";
-	match "notify"		"0xcc";
-	action "logger -p kern.emerg 'WARNING: system temperature too high, shutting down soon!'";
-};
-
-/* EXAMPLES TO END OF FILE
-
-
-# Examples of notify hooks.  A notify is a generic way for a kernel
-# subsystem to send event notification to userland.
-#
-# Here are some examples of ACPI notify handlers.  ACPI subsystems that
-# generate notifies include the AC adapter, power/sleep buttons,
-# control method batteries, lid switch, and thermal zones.
-#
-# Information returned is not always the same as the ACPI notify
-# events.  See the ACPI specification for more information about
-# notifies.  Here is the information returned for each subsystem:
-#
-# ACAD:		AC line state (0 is offline, 1 is online)
-# Button:	Button pressed (0 for power, 1 for sleep)
-# CMBAT:	ACPI battery events
-# Lid:		Lid state (0 is closed, 1 is open)
-# Thermal:	ACPI thermal zone events
-#
-# This example calls a script when the AC state changes, passing the
-# notify value as the first argument.  If the state is 0x00, it might
-# call some sysctls to implement economy mode.  If 0x01, it might set
-# the mode to performance.
-notify 10 {
-	match "system"		"ACPI";
-	match "subsystem"	"ACAD";
-	action			"/etc/acpi_ac $notify";
-};
-*/
diff --git a/sys-freebsd/freebsd-sbin/files/devd.initd b/sys-freebsd/freebsd-sbin/files/devd.initd
deleted file mode 100644
index 617125840814..000000000000
--- a/sys-freebsd/freebsd-sbin/files/devd.initd
+++ /dev/null
@@ -1,47 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2006 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-depend() {
-	need localmount
-	after bootmisc hostname
-	before net
-}
-
-start() {
-	# Services may depend on us, so mark us as inactive
-	mark_service_inactive "${SVCNAME}"
-
-	# Create a queue so that if things went UP DOWN UP DOWN UP DOWN UP
-	# We just do an UP
-	# This is used by /etc/devd_queue
-	mkdir -p /var/run/devd
-
-	ebegin "Starting the Device State Change Daemon"
-	sysctl hw.bus.devctl_disable=0 >/dev/null
-	start-stop-daemon --start --exec /sbin/devd \
-		--pidfile /var/run/devd.pid
-	eend $? "Failed to start devd" \
-	|| return $?
-
-	ebegin "Waiting for Device State Change Daemon to settle"
-	LC_ALL=C sleep "${DEVD_WAIT:-2}"
-	eend $?
-
-	# Now flush the queue
-	einfo "Flushing Device State Change Daemon queue"
-	/etc/devd_queue flush
-
-	mark_service_started "${SVCNAME}"
-	return 0
-}
-
-stop() {
-	ebegin "Stopping the Device State Change Daemon"
-	sysctl hw.bus.devctl_disable=1 >/dev/null
-	start-stop-daemon --stop --exec /sbin/devd \
-		--pidfile /var/run/devd.pid
-	eend $? "Failed to stop devd"
-}
-
-# vim: ts=4 :
diff --git a/sys-freebsd/freebsd-sbin/files/devd_queue b/sys-freebsd/freebsd-sbin/files/devd_queue
deleted file mode 100644
index d42cb830c962..000000000000
--- a/sys-freebsd/freebsd-sbin/files/devd_queue
+++ /dev/null
@@ -1,50 +0,0 @@
-#!/bin/sh
-
-# Notify the rc system that we're in the background
-export IN_BACKGROUND=true
-
-arg1="$1"
-if [ -z "$arg1" ] ; then
-	echo "Command required" > /dev/stderr
-	exit 1
-fi
-shift
-
-case "$arg1" in
-	add)
-		if [ -z "$1" ] ; then
-			echo "Command missing!" > /dev/stderr
-			exit 1
-		fi
-
-		# If we don't have a queue then just run
-		if [ ! -d /var/run/devd ] ; then
-			"$@"
-			exit $?
-		fi
-
-		cmd="$1"
-		args="$*"
-		if [ "$cmd" = "env" ] ; then
-			shift
-			while echo "$1" | grep -q "="; do
-				shift
-				[ "$1" = "--" ] && shift && break
-			done
-			cmd="$1"
-		fi
-		echo "$args" > /var/run/devd/$(basename "$cmd")
-		;;
-	flush)
-		while ! rmdir /var/run/devd 2>/dev/null ; do
-			for cmd in $(cd /var/run/devd; ls) ; do
-				args=$(cat /var/run/devd/$cmd)
-				rm -f /var/run/devd/$cmd
-				$args
-			done
-		done
-		;;
-	*)
-		echo "Unknown command $arg1"
-		;;
-esac
diff --git a/sys-freebsd/freebsd-sbin/files/ipfw.confd b/sys-freebsd/freebsd-sbin/files/ipfw.confd
deleted file mode 100644
index 687f92da922f..000000000000
--- a/sys-freebsd/freebsd-sbin/files/ipfw.confd
+++ /dev/null
@@ -1,10 +0,0 @@
-# ipfw provides a stateful firewall.
-# This means we allow everything out, and if we have a connection we allow it
-# back in. This is very flexable and quite secure.
-
-# For ease of use, we allow auth and ssh ports through as well.
-# To override the list of allowed ports
-#PORTS_IN="auth ssh"
-
-# You may want to enable logging of denied connections
-#LOG_DENY="yes"
diff --git a/sys-freebsd/freebsd-sbin/files/ipfw.initd b/sys-freebsd/freebsd-sbin/files/ipfw.initd
deleted file mode 100644
index 13cdaee68d24..000000000000
--- a/sys-freebsd/freebsd-sbin/files/ipfw.initd
+++ /dev/null
@@ -1,110 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 2007 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-
-# This is a nice client firewall script which should suit most desktop users.
-# We allow auth and ssh in by default.
-
-PORTS_IN=${PORTS_IN-auth ssh}
-
-opts="panic showstatus"
-
-depend() {
-	before net
-	provide firewall
-}
-
-ipfw() {
-	/sbin/ipfw -f -q "$@"
-}
-
-init() {
-	# Load the kernel module
-	if ! sysctl net.inet.ip.fw.enable=1 >/dev/null 2>/dev/null ; then
-		if ! kldload ipfw ; then
-			eend 1 "Unable to load firewall module"
-			return 1
-		fi
-	fi
-
-	ipfw flush
-
-	ipfw add allow all from any to any via lo0
-	ipfw add allow all from any to 127.0.0.0/8
-	ipfw add deny ip from 127.0.0.0/8 to any
-
-	ipfw add allow ipv6-icmp from :: to ff02::/16
-	ipfw add allow ipv6-icmp from fe80::/10 to fe80::/10
-	ipfw add allow ipv6-icmp from fe80::/10 to ff02::/16
-}
-
-start() {
-	local x= log=
-	ebegin "Starting firewall rules"
-	if ! init ; then
-		eend 1 "Failed to flush firewall ruleset"
-		return 1
-	fi
-
-	[ "${LOG_DENY}" = "yes" ] && log="log"
-
-	# Use a statefull firewall
-	ipfw add check-state
-
-	# Open our configured ports
-	if [ -n "${PORTS_IN}" ] ; then
-		local pin=
-		for x in ${PORTS_IN} ; do
-		    pin="${pin}${pin:+,}${x}"
-		done
-		ipfw add allow tcp from any to me ${pin} established keep-state
-		ipfw add allow tcp from any to me6 ${pin} established keep-state
-		ipfw add allow tcp from any to me ${pin} setup keep-state
-		ipfw add allow tcp from any to me6 ${pin} setup keep-state
-		ipfw add allow udp from any to me ${pin} established
-		ipfw add allow udp from any to me ${pin} keep-state
-		ipfw add allow udp from any to me6 ${pin} established
-		ipfw add allow udp from any to me6 ${pin} keep-state
-	fi
-
-	# Nice flexable rules that disallow incoming except for stuff we
-	# have asked for, and allow all outgoing.
-	ipfw add allow tcp from me to any established keep-state
-	ipfw add allow tcp from me to any setup keep-state
-	ipfw add allow tcp from me6 to any established keep-state 
-	ipfw add allow tcp from me6 to any setup keep-state 
-	ipfw add deny ${log} tcp from any to any
-	ipfw add allow udp from me to any established 
-	ipfw add allow udp from me to any keep-state
-	ipfw add allow udp from me6 to any established
-	ipfw add allow udp from me6 to any keep-state
-	ipfw add deny ${log} udp from any to any
-
-	# Be a good firewall and allow some ICMP traffic.
-	# Remove 8 if you really want to disallow ping.
-	ipfw add allow icmp from any to any icmptypes 0,3,8,11,12
-	ipfw add allow ip6 from any to any proto ipv6-icmp 
-
-	eend 0
-}
-
-stop() {
-	ebegin "Stopping firewall rules"
-	# We don't unload the kernel module as that action
-	# can cause memory leaks as of FreeBSD 6.x
-	sysctl net.inet.ip.fw.enable=0 >/dev/null
-	eend $?
-}
-
-panic() {
-	ebegin "Stopping firewall rules - hard"
-	if ! init ; then
-		eend 1 "Failed to flush firewall ruleset"
-		return 1
-	fi
-	eend 0
-}
-
-showstatus() {
-	ipfw show
-}
diff --git a/sys-freebsd/freebsd-sbin/files/sysctl.initd b/sys-freebsd/freebsd-sbin/files/sysctl.initd
deleted file mode 100644
index 9b8aaf8e9b32..000000000000
--- a/sys-freebsd/freebsd-sbin/files/sysctl.initd
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/sbin/openrc-run
-# Copyright 1999-2005 Gentoo Foundation
-# Distributed under the terms of the GNU General Public License v2
-# $Id$
-
-depend() {
-	after checkroot root
-}
-
-start() {
-	ebegin "Configuring kernel parameters"
-
-	if [ ! -f /etc/sysctl.conf ]; then
-		eend 1 "/etc/sysctl.conf" "not found"
-		return 1
-	fi
-	
-	local retval=0 var= comments=
-	while read var comments ; do
-		case "${var}" in
-			""|"#"*) continue;;
-		esac
-		sysctl "${var}" >/dev/null || retval=1
-	done < /etc/sysctl.conf
-	eend ${retval} "Some errors were encountered"
-}
-
-# vim: set ts=4 :