path: root/app-backup/flexbackup/files/flexbackup-1.2.1-spaces-in-filenames.patch

Index: flexbackup
===================================================================
--- flexbackup	(.../tags/flexbackup-1.2.1-r5)	(revision 784)
+++ flexbackup	(.../trunk)	(revision 784)
@@ -1301,8 +1301,8 @@
 	$cmd .= "$::unz";
     }
     $cmd .= "(";
-    $cmd .= "mkdir -p $::device ; ";
-    $cmd .= "cd $::device ; ";
+    $cmd .= "mkdir -p \"$::device\" ; ";
+    $cmd .= "cd \"$::device\" ; ";
     $cmd .= "$::path{cpio} -i ";
     $cmd .= "-m ";
     $cmd .= "-d ";
@@ -1351,9 +1351,8 @@
 
     # Have to take leading './' off to make rsync's include/exclude work right
     $cmd .= " | $::path{sed} -e \"s/\\.\\///g\" | ";
-
     $cmd .= "$::path{rsync} ";
-    $cmd .= "--include-from=- --exclude=* ";
+    $cmd .= "--files-from=- ";
     $cmd .= "--archive ";
     $cmd .= "$::rsync_verb_flag ";
     $cmd .= "--delete --delete-excluded ";
@@ -1368,7 +1367,7 @@
 	    $cmd .= "$remote:";
 	}
     }
-    $cmd .= "$dir/ $::device";
+    $cmd .= "\"$dir/\" \"$::device\"";
 
     push(@cmds, $cmd);
 
@@ -1658,7 +1657,9 @@
     my $tmpfile = "$cfg::tmpdir/ar.$PROCESS_ID";
     my $remove = '';
 
-    &log("| NOTE: ar archives will not descend directories");
+    &log("| NOTE: ar archives will not recurse into subdirectories,");
+    &log("|       which makes them inappropriate for most backups.");
+    &log("|       Be sure this is what you want.");
 
     if (defined($remote) and ($level != 0)) {
 	my $time = &get_last_date($label, $level, 'numeric');
@@ -1682,11 +1683,13 @@
     $cmd = "cd \"$dir\" && ";
     $cmd .= &file_list_cmd( $dir, $stamp, 'newline', $level, $remote, '-maxdepth 1 ! -type d');
     $cmd .= "> $filelist; ";
+    # Escape any spaces in filenames. 
+    $cmd .= "$::path{sed} -i -e 's/ /\\\\ /g' $filelist; ";
 
     $cmd .= "$::path{ar} rc";
     $cmd .= "$::ar_verb_flag ";
     $cmd .= "$tmpfile ";
-    $cmd .= "`$::path{cat} $filelist`";
+    $cmd .= "\@$filelist ";
     $cmd .= "; $::path{cat} $tmpfile $::z";
 
     # Buffer both sides if remote
@@ -1800,12 +1803,9 @@
 
     $cmd = "cd \"$dir\" && ";
     $cmd .= &file_list_cmd( $dir, $stamp, 'newline', $level, $remote);
-    $cmd .= "> $filelist; ";
-
-    $cmd .= "$::path{lha} a";
+    $cmd .= " | $::path{lha} a";
     $cmd .= "$::lha_verb_flag ";
     $cmd .= "$tmpfile ";
-    $cmd .= "`$::path{cat} $filelist`";
     $cmd .= "; $::path{cat} $tmpfile $::z";
 
     # Buffer both sides if remote
@@ -2766,6 +2766,7 @@
     $::path{'dd'} = &checkinpath('dd');
     $::path{'printf'} = &checkinpath('printf');
     $::path{'mkdir'} = &checkinpath('mkdir');
+	$::path{'sed'} = &checkinpath('sed');
 
     push(@::remoteprogs,($::path{'touch'},$::path{'rm'},$::path{'find'},$::path{'printf'},$::path{'mkdir'}));
 
@@ -4894,9 +4895,9 @@
 			$rex .= '\)"';
 		}
 		# Show what the darn thing is constructing for prune expressions.
-		&log("| \"find\" regex for pruning is:");
-		&log("|     $rex");
-		&line();
+        (my $temp = $rex) =~ s/\\([()|])/$1/g;
+		&log("| \"find\" regex for pruning (shell escaping omitted for clarity) is:");
+		&log("|     $temp");
 		$cmd .= '-regex ' . $rex . ' -prune -o ';
     } else {
 		# Show what the darn thing is constructing for prune expressions.
@@ -4906,6 +4907,7 @@
 		# don't have permissions on and are running as non-root)
 		$cmd .= "-depth ";
     }
+    &line();
 
     $cmd .= "$::mountpoint_flag ";
     $cmd .= "! -type s ";
@@ -5301,12 +5303,14 @@
 	print $::msg "| Checking '$cfg::buffer' on this machine... ";
 	$pipecmd = "sh $tmp_script ";
     } else {
+	$pipecmd = 
+        "$::remoteshell $host '$::path{mkdir} -p $cfg::tmpdir'; " .
+        "cat $tmp_script | ($::remoteshell $host 'cat > $tmp_script; " .
+        "sh $tmp_script; rm -rf $cfg::tmpdir')";
 	print $::msg "| Checking '$cfg::buffer' on host $host... ";
-	$pipecmd =  "$::remoteshell $host '$::path{mkdir} -p $cfg::tmpdir'; cat $tmp_script | ($::remoteshell $host 'cat > $tmp_script; sh $tmp_script; rm -rf $cfg::tmpdir')";
     }
 
     if (!defined($::debug)) {
-
 	open(PIPE,"$pipecmd |") || die;
 
 	$explicit_success = 0;
Index: flexbackup.conf
===================================================================
--- flexbackup.conf	(.../tags/flexbackup-1.2.1-r5)	(revision 784)
+++ flexbackup.conf	(.../trunk)	(revision 784)
@@ -12,19 +12,27 @@
 
 # Configure backup "sets".
 # Not needed if you use "-dir <dir>" to backup one tree at a time.
-# Each set is a simple space-separated list of filesystems
-# Remote filesystems should denoted as 'host:dir'
-# You can use anything (other than 'all') as set names
-#
-# Example:
-#  $set{'set1'} = "/home /usr";
-#  $set{'set2'} = "/dir3 machine2:/dir4 machine3:/dir5";
+# Each set is a simple space-separated list of filesystems.  Remote filesystems
+# should denoted as 'host:dir'.  If the filesystem name (local or remote)
+# contains spaces, then it should be enclosed in its entirety in double quotes.
+# Multiple quoted filesystems included in a set should be space separated just
+# like unquoted filesystem.  The Perl '.' string concatenation operator can be
+# used to split excessively long lines.
+#
+# You can use anything (other than 'all') as set names.
+#
+# Examples:
+#  $set{'set1'} = '/home /usr';
+#  $set{'set2'} = '/dir3 machine2:/dir4 machine3:/dir5';
+#  $set{'set3'} =
+#      '"/mnt/winmachine1/Documents and Settings" ' .
+#      '"/mnt/winmachine1/Program Files"';
 #
 # "-set all" will back up all defined sets. If you are doing a full backup
 # using tapes, each "set" will go onto a different tape and you will be
 # prompted for tape change in between.
 #
-$set{'backup'} = "/home";
+$set{'backup'} = '/home';
 
 # Subtree pruning
 # A space-separated list of directories to prune from each backup.
@@ -42,7 +50,7 @@
 # start with "./".  To be helpful, FlexBackup packages each space-separated
 # prune directory as follows.  If you have a prune list like this
 #
-#     $prune{'/somedir'} = "one two three";
+#     $prune{'/somedir'} = 'one two three';
 #
 # then, the constructed -regex argument to "find" looks like this
 #
@@ -54,31 +62,38 @@
 # terms that match the current base directory in the set you're backing
 # up.  For example, if your backup set definition looks like this
 #
-#     $set{'daily'} = "/home /root /var /usr";
+#     $set{'daily'} = '/home /root /var /usr';
 #
 # and you want to do some exclusions in "/home" and "/var" (but not the other
 # directories), you must set up a prune list for those two directories 
 # separately.  For example, to exclude bert's and ernie's home directories plus
 # /var/tmp, you would need the following:
 #
-#     $prune{'/home'} = "bert ernie";
-#     $prune{'/var'}  = "tmp";
+#     $prune{'/home'} = 'bert ernie';
+#     $prune{'/var'}  = 'tmp';
 #
 # In particular, combining these *does not* work.  For example, this
 #
-#     $prune{'/'} = "home/bert home/ernie var/tmp";
+#     $prune{'/'} = 'home/bert home/ernie var/tmp';
 #
 # doesn't work, unless, of course, your backup set is backing up "/", 
 # which our example is not.
 #
+# Like the $set configuration item, special handling is required for
+# directories with spaces in them.  Double quotes should surround pruning
+# targets but not the key.  Example:
+#
+#     $prune{'/mnt/winmachine1/Documents and Settings'} =
+#         '"user1/Local Settings/Temp" user2';
+#
 # Many other complex and abstruse variations are possible.  Here's one 
 # interesting corner case.  If you want to preserve a directory but none of its
 # contents, you can do it.  Picking on ernie from our previous example, preserve
 # only his home directory:
 #
-#     $prune{'/home'} = "ernie/.*";
+#     $prune{'/home'} = 'ernie/.*';
 #
-$prune{'/'} = "tmp proc";
+$prune{'/'} = 'tmp proc';
 
 # Compression
 $compress = 'gzip'; # one of false/gzip/bzip2/lzop/zip/compress/hardware/lzma
Index: flexbackup.conf.5
===================================================================
--- flexbackup.conf.5	(.../tags/flexbackup-1.2.1-r5)	(revision 784)
+++ flexbackup.conf.5	(.../trunk)	(revision 784)
@@ -24,25 +24,51 @@
 .TP
 \fB$set{\fI'tag'\fR}\fR = \fI'/dir'\fR;
 Configure backup \(dqsets\(dq. Not needed if \(dq-dir <dir>\(dq is used to
-backup one tree at a time.  Each set is a simple space-separated list of
-filesystems/directories. Remote filesystems should be denoted as
-\(dqhost:directory\(dq.  You can use anything (other than \fI'all'\fR) as set
-names. Using \(dq-set all\(dq will back up all defined sets. If you are doing
-a full backup using tapes, each \(dqset\(dq will go onto a different tape and
-you will be prompted for tape change in between. Examples:
+backup one tree at a time.
+Each set is a simple space-separated list of filesystems/directories.
+Remote filesystems should be denoted as \(dqhost:directory\(dq.
+You can use anything (other than \fI'all'\fR) as set names.
+Using \(dq-set all\(dq will back up all defined sets.
+If you are doing a full backup using tapes, each \(dqset\(dq will go onto a
+different tape and you will be prompted for tape change in between.
+Examples:
 .RS
 .PP
 \fB$set{\fI'set1'\fI}\fR = \fI'/home /usr'\fR;
 .br
 \fB$set{\fI'set2'\fI}\fR = \fI'/dir3 machine2:/dir4 machine3:/dir5'\fR;
+.br
+.PP
+Directories (local or remote) with spaces in their names should be enclosed in
+their entirety in double quotes.
+Multiple quoted directories included in a set should be space separated just
+like unquoted directories.
+The Perl '.' string concatenation operator can be used to split excessively
+long sets.
+Example:
+.PP
+\fB$set{\fI'set3'\fI}\fR = \fI
+    '\(dq/mnt/winmachine1/Documents and Settings\(dq ' .
+    '\(dq/mnt/winmachine1/Program Files\(dq';\fR
 .RE
 .TP
 \fB$prune{\fI'/'\fR}\fR = \fI'tmp proc'\fR;
 Configure subtree pruning. A space-separated list of directories to prune from
 each backup. Key is a filesystem/directory or \(dqhost:directory\(dq spec as
-outlined above. Regular expressions allowed (not shell-type wildcards!). There
-is additional explanation (and a lot of examples) in the provided configuration
-file.
+outlined above. Regular expressions allowed (not shell-type wildcards!).
+.RS
+.PP
+Like the \fB$set\fR configuration item, special handling is required for
+directories with spaces in them.  Double quotes should surround pruning targets
+but not the key.  Example:
+.PP
+\fB$prune{\fI'/mnt/winmachine1/Documents and Settings'\fI}\fR = 
+    \fI'\(dquser1/Local Settings/Temp\(dq user2'\fR;
+.br
+.PP
+There are lots of examples and additional explanation in the provided sample
+configuration file.
+.RE
 .TP
 \fB$compress\fR = \fI'false|gzip|bzip2|lzop|zip|compress|hardware'\fR;
 .TQ
@@ -207,7 +233,7 @@
 .RS
 .TP
 If GNU \fBtar\fR is called \fB\(dqgtar\(dq\fR on your system:
-\fB$path{'tar'} = 'gtar';
+\fB$path{'tar'} = 'gtar';\fR
 .TP
 Or it can be used to \fB\(dqsudo\(dq\fR certain commands:
 \fB$path{\fI'find'\fR}\fR = \fI'sudo find'\fR;
@@ -304,3 +330,6 @@
 Written by Edwin Huffstutler (edwinh@computer.org)
 .SH "SEE ALSO"
 \fBflexbackup\fR(1)
+.\" Local Variables:
+.\" mode: nroff
+.\" End: